Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra models. This ACL High Performance Rod Bearing Set is engineered for precision engine builds requiring increased durability and reliable oil clearances under high-load conditions. These 0.50mm oversized bearings are designed for crankshafts where the rod journals have been machined to a specific undersize, ensuring restored geometry and optimal performance.

• Manufacturer Part Number: 6B2960H-.50
• Size: 0.50mm Oversize
• Type: High Performance Rod Bearing Set
• Series: ACL Race Series compatible (RB25DETT/RB26DETT)
• Fitment: 1991-2002 Infiniti G20 (Base, T), Nissan 200SX SE-R, Nissan NX (SE, XE), and Nissan Sentra (SE, SE-R)

Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra models.

This ACL High Performance rod bearing set is engineered for high-load engine builds and racing applications. Designed as a 0.25mm (.010") oversized set, these bearings are the correct choice for engines where the crankshaft journals have been reground to restore surface integrity. ACL bearings utilize a tri-metal construction that provides the necessary fatigue strength and embeddability required to protect your rotating assembly under extreme RPM and cylinder pressures.

• Manufacturer Part Number: 6B2960H-.25
• Oversize: 0.25mm (.010")
• Construction: High-strength tri-metal design for superior load-carrying capacity
• Application: Direct replacement for worn bearings on reground crankshafts
• Target Series: High Performance / Race Series durability

Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra.

The ACL High Performance Rod Bearing Set is engineered for the rigorous demands of high-output engines, providing the precise tolerances required for performance builds. This set is specified with a 0.025mm oversized dimension, ensuring the correct oil clearance and reliability for critical engine internal components.

• Manufacturer Part Number: 6B2960H-.025
• Series: High Performance
• Size: 0.025mm Oversized
• Application: High-load rod bearing replacement for RB25DETT and RB26DETT configurations
• Fitment: Covers various 1991-2002 Infiniti and Nissan chassis including G20, 200SX SE-R, NX, and Sentra SE/SE-R

Fits select 2001-2024 Nissan and Infiniti models equipped with the 3.5L V6 engine, including the 350Z, Altima, Maxima, Murano, Pathfinder, G35, and M35.

The ACL Race Series rod bearing set is engineered for high-performance applications where increased oil flow and cooling are critical. This "HX" designated set provides extra oil clearance (typically 0.025mm or 0.001") compared to standard bearings, making it an essential choice for high-RPM builds, forced induction setups, or engines utilizing higher viscosity oils. Built with a hardened lead-tin-copper trimetal construction, these bearings offer the fatigue strength and embeddability required for demanding street and track use.

• Manufacturer Part Number: 6B2640HX-STD
• Bearing Size: Standard (STD)
• Clearance: Extra Oil Clearance (HX-Series)
• Engine Fitment: VQ35DE 3.5L V6
• Construction: High-strength trimetal lead-tin-copper plate
• Performance: Designed for increased oil film thickness and reduced heat at high loads

Fits select 2001-2024 Nissan and Infiniti models including 350Z, Altima, Maxima, Murano, Pathfinder, Quest, FX35, G35, I35, JX35, M35, QX4, and QX60 (3.5L).

This ACL High Performance rod bearing set is engineered for the Nissan VQ35DE engine platform. These bearings are 0.25mm oversized, specifically designed for crankshaft journals that have been ground or machined to a 0.25mm undersize to restore precise oil clearances and bearing surface integrity during an engine rebuild.

• Manufacturer Part Number: 6B2640H-.25
• Bearing Size: 0.25mm Oversize
• Engine Application: Nissan VQ35DE (3.5L V6)
• Performance Grade: Designed for high-load and high-RPM environments
• Compatibility: Replaces factory-size rod bearings on machined cranks

Fits select 2001-2024 Nissan and Infiniti models including 350Z, Altima, G35, Maxima, Murano, Pathfinder, and Quest (3.5L).

This ACL High Performance Rod Bearing Set is specifically engineered for the Nissan VQ35DE 3.5L V6 engine. Featuring a 0.025mm oversize, these bearings provide the precise oil clearance required for engine rebuilds where the crankshaft journals have been polished or machined. Designed to withstand the high-load demands of performance driving, these shells offer enhanced fatigue resistance and superior durability over standard components.

• Manufacturer Part Number: 6B2640H-.025
• Engine Fitment: VQ35DE 3.5L-V6
• Oversize Dimension: 0.025mm
• Component Type: High Performance Rod Bearing Set
• Construction: High-strength materials for increased load capacity

Fits select 2007-2024 Nissan 350Z, 370Z and Infiniti G35, G37, Q50, and Q60 models equipped with the VQ35HR or VQ37VHR engines.

The ACL High Performance Rod Bearing Set is engineered for high-RPM racing and performance applications where standard OE bearings may fail. These bearings utilize a specialized tri-metal construction designed to withstand higher loads and provide superior fatigue resistance. Whether you are rebuilding a VQ35HR for track use or refreshing a high-mileage VQ37VHR, these standard-size bearings offer the precision tolerances required for critical engine clearances.

• Manufacturer Part Number: 6B2639H-STD
• Bearing Size: Standard (STD)
• Engine Application: Nissan VQ35HR and VQ37VHR
• Construction: High-strength tri-metal lead-tin-copper bond
• Increased crush for improved bearing retention
• Designed for high-load, high-performance environments

Fits select 2007-2024 Nissan 350Z, 370Z and Infiniti G35, G37, Q50, Q60, and M/Q70 series models.

Engineered for high-stress racing and performance applications, the ACL High Performance series rod bearing set provides the precision and durability required for VQ-series engine builds. This 0.25mm oversized set is designed specifically for crankshafts that have been reground, ensuring proper oil clearance and rotational consistency. The tri-metal construction utilizes a hardened lead, tin, and copper overlay to withstand higher RPMs and increased combustion pressures compared to standard OE components.

• Part Number: 6B2639H-.25
• Oversize: 0.25mm (.010")
• Construction: High-strength tri-metal design
• Application: Replaces worn or damaged factory rod bearings during engine overhaul
• Engine Fitment: Nissan VQ35HR / VQ37VHR and VR30DDTT architectures

Fits select 1984-2004 Nissan and Infiniti vehicles equipped with 3.0L engines, including 300ZX, Maxima, Pathfinder, and Frontier.

This ACL Race Series High Performance Rod Bearing Set (MPN: 6B2390HX-STD) is engineered for high-load precision engine builds. The HX-series designation indicates "Extra Oil Clearance," providing an additional 0.025mm (0.001") of clearance compared to the standard STD grade. This specific tolerance is preferred by engine builders to improve oil flow and maintain a stable hydrodynamic film in high-RPM or forced-induction applications.

• Manufacturer Part Number: 6B2390HX-STD
• Size: Standard (STD) with HX Extra Oil Clearance
• Engine Compatibility: 3.0L V6 (VG30 variants)
• Tri-metal construction for superior fatigue strength and load capacity
• Hardened steel backing for improved bearing crush and retention

Detailed Vehicle Fitment:

• 1984-1996 Nissan 300ZX
• 1985-1994 Nissan Maxima
• 1987-1988 Nissan 200SX SE
• 1987-2000 Nissan Pathfinder
• 1990-1992 Infiniti M30
• 1990-1994 Nissan D21
• 1993-1997 Infiniti J30
• 1993-2002 Nissan Quest
• 1994-1995 Nissan Pickup
• 1997-2000 Infiniti QX4
• 1999-2004 Nissan Frontier
• 2000-2004 Nissan Xterra

Fits select 1984-2004 Nissan and Infiniti vehicles with 3.0L engines, including 300ZX, Maxima, Pathfinder, and Frontier.

This ACL High Performance Rod Bearing Set is engineered to handle the increased loads and thermal demands of performance engines. Designed as a direct replacement for factory components, these bearings ensure precise oil clearances and superior fatigue strength. Whether you are performing a standard rebuild or preparing a VG30DETT for high-boost applications, these standard-size (STD) bearings provide the reliability needed to protect your crankshaft and maintain consistent oil pressure.

• Manufacturer Part Number: 6B2390H-STD
• Bearing Size: Standard (STD)
• Engine Displacement: 3.0L V6
• Application: High Performance / Race Series compatible

Fits select 1984-2004 Nissan and Infiniti models, including 300ZX, Maxima, Pathfinder, and Xterra (3.0L).

This ACL High Performance rod bearing set is designed for precision engine rebuilding where the crankshaft journals have been ground or turned. The 0.25mm (.010") oversize allows for proper oil clearance on machined surfaces, providing the durability and load-bearing capacity required for high-performance 3.0L V6 applications. These bearings are engineered to withstand the increased stresses of high-RPM use while maintaining consistent oil film thickness.

• Manufacturer Part Number: 6B2390H-.25
• Bearing Size: 0.25mm (.010") Oversize
• Engine Displacement: 3.0L
• Application: Direct replacement for worn or standard-sized rod bearings during a rebuild
• Quantity: Complete set for one engine

Fits select 1984-2004 Nissan and Infiniti models, including 300ZX, Pathfinder, Maxima, Frontier, and Xterra (3.0L).

This ACL High Performance Rod Bearing Set is engineered for engine builders requiring precise oil clearances on 3.0L V6 powerplants. These 0.025mm oversized bearings are a critical component for crankshafts that have been ground or polished to specific tolerances, ensuring consistent oil film thickness and rotational stability under high-load conditions.

Constructed to meet the rigorous demands of high-performance driving, these bearings replace worn factory units to restore oil pressure and protect the bottom end of your engine. Whether you are refreshing a VG30DETT in a 300ZX Turbo or rebuilding a workhorse engine in a Pathfinder or Frontier, ACL bearings provide the material strength and precision necessary for a reliable build.

• Manufacturer Part Number: 6B2390H-.025
• Bearing Size: 0.025mm Oversized (.001")
• Engine Compatibility: 3.0L V6
• Includes complete set of connecting rod bearings
• Designed for high-performance and race applications

Fits select 1999-2017 Acura TL, MDX, RDX, RL, Honda Accord, Odyssey, Pilot, Ridgeline, and Saturn Vue (J35 3471cc V6).

Engineered for high-RPM performance and competition use, this ACL Race Series connecting rod bearing set is designed to handle the increased loads and thermal stresses of modified Honda J35 engines. The "HX" suffix indicates that these bearings feature an additional 0.025mm (0.001") of oil clearance compared to standard bearings. This extra clearance is a critical requirement for high-performance builds, allowing for a thicker oil film and improved cooling flow to prevent bearing seizure under extreme conditions.

Constructed with ACL’s proven tri-metal design, these bearings utilize a hardened steel backing for superior crush and support, bonded to a lead-tin-copper overlay that provides the embeddability and fatigue resistance necessary for professional-grade racing applications.

• Manufacturer Part Number: 6B1995HX-STD
• Series: Race Series
• Size: Standard (STD) with Extra Oil Clearance (HX)
• Material: High-strength Tri-metal
• Engine Fitment: J35 3471cc V6 SOHC 24V
• Includes: Full set of rod bearings for one engine

Fits select 1999-2017 Acura CL, MDX, RDX, RL, TL, and TSX; Honda Accord, Odyssey, Pilot, and Ridgeline; and Saturn Vue (J35 3471cc V6 SOHC 4V).

Engineered for high-RPM and high-load racing applications, the ACL Race Series rod bearing set provides the durability required for performance-built Honda J35 engines. These bearings are designed to withstand the increased cylinder pressures and heat generated in competition environments, offering superior fatigue strength compared to standard OE-style replacements. This set is a standard size (STD) replacement, ensuring precise clearances when your crankshaft journals are within factory tolerances.

• Manufacturer Part Number: 6B1995H-STD
• Series: ACL Race Series
• Size: Standard (STD)
• Engine Compatibility: Honda J35 3471cc V6 SOHC 4V
• Application: High-performance and racing use
• Construction: High-strength tri-metal design for optimized load carrying capacity

Fits select 2007-2016 BMW 1 Series M, 135i, 335i, 335is, 535i, 740i, 740Li, X6, and Z4 models (3.0L).

Reinforce your engine's bottom end with the ACL Race Series High Performance Rod Bearing Set. Specifically engineered for the high-revving demands of BMW 3.0L inline-six engines (N54, N55, and S55B30), these bearings provide the thermal stability and load capacity required for competitive driving and forced induction builds. Utilizing a specialized tri-metal design with a hardened steel backing, these bearings offer superior support and heat dissipation compared to standard OE components.

• Manufacturer Part Number: 6B1584HX-STD
• Engine Compatibility: 3.0L Inline-6 (N54/N55/S55B30)
• Tri-metal construction for maximum fatigue resistance
• Hardened steel backs for improved bearing retention and consistent clearance
• Increased crush for better seating within the rod housing
• Designed for high-RPM and high-load racing environments

Whether you are performing a preventative maintenance overhaul on an N54 or building a track-ready S55, these ACL Race Series bearings deliver the precision tolerances needed to protect your crankshaft and connecting rods under extreme stress.

Fits select 2007-2018 BMW 1 Series M, 135i, 328i, 335i, 535i, 740i, M3, X6, and Z4 (3.0L).

The ACL High Performance Rod Bearing Set is engineered for the specific demands of BMW 3.0L inline-six engines, including the N54, N55, and S55 platforms. Designed for precision and durability in high-load environments, these standard-size bearings are an essential upgrade or replacement for performance-driven builds. A critical design feature is the integrated Notch Relief, which prevents distortion during the notching operation, ensuring the bearing maintains its geometry without compromising oil film integrity or performance.

• Precision Engineering: Standard size (STD) designed for factory crankshaft tolerances.
• Notch Relief: Specific design prevents distortion during the notching process for improved reliability.
• Engine Compatibility: Fits N51, N52, N54, N55, and S55B30 3.0L powerplants.
• Manufacturer Part Number: 6B1584H-STD

Fits select 2007-2018 BMW 1 Series, 3 Series, 5 Series, 7 Series, M3, X6, and Z4 (3.0L).

This ACL Performance Rod Bearing Set is specifically engineered for high-load N54B30 and N55B30 engines. Sized at .25mm oversized, these bearings are designed for crankshafts that have been ground to a specific undersize, ensuring proper oil clearance and rotational stability during performance driving. The tri-metal construction provides the durability and heat dissipation required for forced induction applications.

• Manufacturer Part Number: 6B1584H-.25
• Bearing Size: .25mm Oversized
• Engine Compatibility: N54B30 / N55B30 3.0L Inline-6
• Tri-metal design with hardened steel backing
• Enhanced load-carrying capacity for high-RPM use
• High-strength overlay for superior seizure resistance

Fits select 2007-2018 BMW 1 Series M, 135i, 328i, 335i, 335is, 335xi, 535i, 535xi, 740i, 740Li, M3, X6, and Z4 (3.0L).

Engineered for high-performance and competition use, the ACL RACE Series connecting rod bearing set is designed to handle the increased loads and higher RPMs found in tuned N54, N55, and S55B30 engines. These bearings provide the precise tolerances and thermal fatigue resistance necessary for maintaining oil film consistency under extreme conditions.

• Manufacturer Part Number: 6B1584H-.025
• Series: RACE Series
• Engine Fitment: BMW N54, N55, S55B30 (3.0L Inline 6)
• Material: High-strength tri-metal construction for superior load-bearing capacity
• Backing: Hardened steel backs for improved bearing retention and heat dissipation
• Overlay: Lead-tin-copper overlay for reduced friction and increased durability

Fits select 2001-2009 BMW M3, Z3, and Z4 models (S54B32 / N54B30).

Address rod bearing wear and improve reliability in your high-performance BMW engine with the ACL Race Series rod bearing set. These bearings are engineered for the high-RPM demands of the S54 platform, featuring a high-strength tri-metal construction that provides superior load-carrying capacity and fatigue resistance compared to standard replacements. This specific HX-series set is designed with an additional .001 inch (0.025mm) of oil clearance, making them ideal for performance builds or applications requiring increased oil flow.

• Manufacturer Part Number: 6B1569HX-STD
• Bearing Series: ACL Race Series (HX)
• Oil Clearance: .001 in (0.025mm) Extra Clearance
• Material: Hardened tri-metal Lead-Tin-Copper
• Engine Application: BMW S54B32 3.2L Inline-6

Fits select 2001-2009 BMW M3, Z3, and Z4 models equipped with the S54B32 3.2L DOHC inline-six engine.

Protect your high-revving BMW powerplant with ACL rod bearings. Engineered to withstand the extreme loads and high-RPM environment of the S54 engine, these bearings are a critical component for both preventative maintenance and performance engine builds. This set is designed to replace worn OE bearings, helping to maintain consistent oil pressure and ensure rotating assembly longevity.

• Standard size (STD) for factory-spec crankshaft journals
• Precision manufactured to meet tight tolerances for the S54B32 3246cc engine
• Specifically designed for the high-revving characteristics of BMW M engines
• Direct replacement for factory bearings in 2001-2009 applications
• Manufacturer Part Number: 6B1569H-STD

Compatibility includes:

Fits select 2001-2009 BMW M3, Z3, and Z4 models (S54B32).

Engineered to meet the tight tolerances and high-RPM demands of the BMW S54 engine, this ACL High Performance Rod Bearing Set provides the essential durability required for both street performance and track applications. These bearings are 0.25mm oversized, making them the correct choice for rebuilds where the crankshaft journals have been machined or ground to restore surface integrity.

Designed for consistent oil film retention and superior load capacity, these bearings replace worn OE components to protect your rotating assembly during high-stress operation. Whether you are performing a preventative rod bearing service or a complete engine overhaul, ACL bearings deliver the precision fitment required for the S54 platform.

• Manufacturer Part Number: 6B1569H-.25
• Bearing Size: 0.25mm Oversized (for machined crankshafts)
• Engine Compatibility: S54B32 / N54 (select models)
• Engineered for high-load and high-revving environments

Fits select 2001-2009 BMW M3 (Base), Z3 (M Coupe, M Roadster, Roadster), and Z4 (M Coupe, M Roadster, sDrive35i) models with the S54B32 engine.

Protect your high-revving S54 engine with the ACL High Performance Rod Bearing Set. These bearings are engineered to withstand the extreme internal pressures and high-RPM operation characteristic of BMW M-series engines. This specific set features a 0.025mm oversized thickness, designed for engines where the crankshaft journals have been reground or when specific oil clearances must be achieved to restore factory tolerances.

• Manufacturer Part Number: 6B1569H-.025
• Bearing Type: Connecting Rod Bearing Set
• Undersize/Oversize: 0.025mm
• Engine Compatibility: BMW S54B32 3.2L I6
• Tri-metal construction for enhanced load-bearing capacity and thermal conductivity
• Precision-engineered for consistent oil film thickness

Fits 2016-2026 BMW 340i, M2, M3, M4, X3, X4, and Toyota GR Supra.

The ACL Performance Rod Bearing Set is engineered for the high-demand environments of the BMW B58 and S58 platforms. Designed to provide superior durability over standard replacements, this standard-size bearing set ensures precise oil clearances and maximum load-carrying capacity for both high-performance street use and track applications. Whether you are performing a preventative refresh or a full engine build, these bearings offer the reliability needed to protect your rotating assembly under increased boost and RPM.

• Manufacturer Part Number: 6B1510HX-STD
• Size: Standard (STD)
• Application: Direct replacement for OE rod bearings
• Construction: High-performance materials designed for increased thermal and mechanical stress

Fits select 2016-2026 BMW 340i, M2, M3, M4, X3, X4, and 2020 Toyota GR Supra.

The ACL 6B1510H-STD Performance Rod Bearing Set is engineered for the high-demand environments of the BMW B58 and S58 engines. Whether you are rebuilding for high-boost applications or refreshing a track-driven engine, these standard-size bearings provide the necessary fatigue resistance and lubrication control required when factory components reach their limits.

• Manufacturer Part Number: 6B1510H-STD
• Bearing Size: Standard (STD)
• Construction: Tri-metal design with hardened steel backing
• Application: High-performance street, track, and racing use
• Engine Compatibility: BMW B58 and S58 3.0L Inline-6

This ACL High Performance Standard Size Rod Bearing Set is engineered for BMW 3201cc engines, providing critical support for the rotating assembly in demanding applications. Rod bearings are vital components that reduce friction between the connecting rod and the crankshaft journal, ensuring smooth operation and protecting the engine from premature wear.

ACL's High Performance series bearings are designed to withstand increased loads and higher RPMs compared to standard original equipment. Crafted with precision, these bearings maintain optimal oil clearance and offer superior fatigue resistance, crucial for both high-performance street builds and track use. The 'Standard Size' designation confirms these bearings are dimensionally equivalent to the factory new specifications, ideal for engines with unmachined crankshaft journals.

• Engineered for BMW 3201cc engines
• Standard Size: Matches original equipment dimensions for unmachined crankshafts
• High Performance construction: Designed for increased engine loads and higher RPMs
• Enhanced fatigue resistance and wear characteristics
• Maintains optimal oil film strength and clearance

Included: Complete set of connecting rod bearings (MPN: 6B1497H-STD).

This ACL .25mm oversized connecting rod bearing set is designed for select 1982-2006 BMW 3-series, 5-series, X3, X5, Z3, and Z4 models equipped with M20, M50, M52, or M54 engines. These bearings are essential for engine overhauls where the crankshaft journals have been machined .25mm undersize, ensuring proper oil clearance and rotational stability.

Manufactured to strict tolerances, this set is a direct replacement for worn OE bearings in high-performance or high-mileage rebuilds. It specifically supports 1919CC configurations featuring an 80.0mm bore and 66.0mm stroke, providing the durability needed for the demanding thermal and mechanical loads of BMW's straight-six powerplants.

• Manufacturer Part Number: 6B1490H-.25
• Oversize: .25mm
• Engine Applications: BMW M20, M50, M52, M54
• Bore: 80.0mm
• Stroke: 66.0mm
• Displacement: 1919CC
• Quantity: Complete set of connecting rod bearings

This ACL Standard Size Rod Bearing Set (part number 6B1170A-STD) is a direct replacement for the connecting rod bearings in specific Toyota engines. Rod bearings are critical components that support the connecting rod journal on the crankshaft, allowing for smooth rotation and minimizing friction.

Designed to maintain correct oil clearance, these standard size bearings are essential for proper engine lubrication and longevity. Replacing worn rod bearings helps prevent premature engine wear and potential catastrophic failure, ensuring your engine operates reliably.

• Manufacturer Part Number: ACL 6B1170A-STD
• Bearing Size: Standard
• Application: Connecting Rod

Fitment: Fits select Toyota vehicles equipped with the 2759cc (5MGE) or 2954cc (7MGE) engine, for model years 1994-1998.

Fits select 2007-2023 Toyota and Lexus models equipped with 4.6L, 5.0L, and 5.7L V8 engines, including Tundra, Land Cruiser, Sequoia, GX460, and IS F (1UR-FE / 2UR / 3UR-FE).

This ACL High Performance Main Bearing Set is engineered to provide the durability and precision required for high-output Toyota and Lexus V8 engines. These bearings are designed to maintain consistent oil clearances and provide superior crankshaft support under high-load conditions. As a standard-size replacement, they ensure a precise fit for factory-spec journals, making them an essential component for high-performance engine builds or heavy-duty refreshes.

• Manufacturer Part Number: 5M8632H-STD
• Bearing Size: Standard (STD)
• Engine Compatibility: Toyota 1UR-FE, 2UR, and 3UR-FE
• Engineered for high-stress performance and racing applications
• Precision manufactured for consistent oil film maintenance

Fits select 2001-2015 Lexus HS250h, Scion tC/xB, and Toyota Camry, Corolla, Highlander, Matrix, RAV4, and Solara (2.4L).

The ACL High Performance Main Bearing Set is engineered to provide the consistent oil film and crankshaft support required in high-RPM and high-load applications. Designed specifically for the Toyota 2AZ-FE engine platform, this standard-size bearing set replaces worn factory components with a high-strength alternative that maintains tighter tolerances for critical engine clearances.

• Manufacturer Part Number: 5M8412H-STD
• Engine Fitment: 2.4L (2AZ-FE)
• Size: Standard Size (STD)
• Material: High-performance tri-metal construction for superior fatigue strength and embeddability.
• Application: Direct replacement for OE main bearings in street performance or racing builds.

Vehicle Fitment:

• 2010-2012 Lexus HS250h Base/Premium
• 2005-2010 Scion tC Base
• 2007-2008 Scion tC Spec
• 2008-2015 Scion xB Base
• 2002-2011 Toyota Camry (All trims including Hybrid)
• 2009-2010 Toyota Corolla XRS
• 2001-2007 Toyota Highlander Base
• 2009-2013 Toyota Matrix S/XRS
• 2001-2008 Toyota RAV4 (All trims)
• 2002-2008 Toyota Solara (All trims)