The 2025 Ram RHO Stealth Fighter Front Bumper combines aggressive style with full OEM sensor and light retention. It supports a 40" radius light bar or ten pod lights in the center, plus a pod light on each side. Heavy-duty D-ring clevis mounts come standard, with an optional winch mount available. Built tough with a hammer black powder coat and satin black panels, this direct-fit bumper is proudly made in the USA.

• Compatible With Adaptive Cruise Control When Used With Our Relocation Kit (AC6305101NA Sold Separately)
• Integrated Mounting For (1) Universal 40" Radius Light Bar or (10) Pod Lights In Center
• Compatible With Hands-Free Driving Assist And All Other OEM Drive Assist Features
• Includes (2) 1" Thick CNC D-Ring Clevis Mounts For A 3/4" Pin D-Ring
• Integrated Mounting For (1) Universal Pod Light In Each Side
• Direct Fitment Using Supplied Hardware For Easy Installation
• Durable Hammer Black Powder Coat With Satin Black Panels
• Optional Add-On Heavy Duty Winch Mount (AC630810103)
• Retains OEM Side Marker Lights
• Retains OEM Parking Sensors
• Proudly Made in the USA
• Aggressive Styling

This Part Fits:

ADD Offroad's Ram TRX PRO Bolt-On Front Bumper has the lowest profile and highest clearance possible, while still protecting the front end of your truck. The center of the bumper features inset mounting points for 8 cube lights or a 30-inch radius light bar. In addition to that, there is an optional light hoop that mounts just above the bumper, able to hold four 6-inch round lights for maximum lighting on the trail. No modifications are needed to install this bumper, and all factory features have been integrated into the design. Mounting points for OEM marker lights and parking sensors are accounted for, and the OEM tow hooks remain intact. Addictive Desert Designs leads the industry in fit, finish, and function, and this TRX front bumper is no exception. The ultra high clearance Baja design of the PRO Bolt-On flows perfectly with the lines of your Ram, and gives it an aggressive stance. A vented 1/8-inch aluminum skid plate allows for proper airflow to the cooler, and offers front-end protection while adding as little extra weight as possible. As always, this bumper is fully bolt-on and Made in America.

• Universal Light Mount Up To 8 Cube Lights Or 30 Inch Light Bar
• Satin Black Powder Coat Panels
• Hammer Black powder coat
• Parking Sensor Cutouts

This Part Fits:

Revamp your ride with the Phantom Series TRX Front Bumper. With a sleek, low profile and prerunner inspired design, this bumper will give your ride an instantly upgraded look. Constructed from plate steel for a more enhanced style, the knife's edge design mimics the look of trailing arms. It comes with a lightweight 3/16-inch aluminum skid plate which provides full protection without adding excess weight. The skid also boasts vented cutouts to ensure proper air flow to the intercooler.

• 2 - 10 In. Single Row LED Light Mounts
• Satin Black Powder Coat Panel Finish
• 2 - 10" single row led light mounts
• Hammer Black Powder Coat Finish
• 20 In. Light Bar Mount
• Parking Sensor Cutouts

This Part Fits:

Transform the front end of your Ram TRX with the Addictive Desert Designs Bomber Ram TRX Front Bumper. The modern plate steel design brings aggressive styling while remaining low-profile. The center of the bumper provides inset mounting points for four Rigid 360 6 in. round lights, while each side panel provides a cube light mounting point. The Bomber does not take away from any of the factory features of the TRX. Accommodations for OEM marker lights and parking sensors are integrated into the TRX bumper design, and the OEM tow hooks remain intact. Addictive Desert Designs leads the industry in fit and finish and this bumper is no exception. The side wings follow the factory fender lines perfectly and the bumper sits almost flush to the front of the vehicle. A full 3/16 in. aluminum skid plate offers superior front end protection without adding unnecessary weight. As always, this product is fully bolt-on and made in America.

• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish

This Part Fits:

Give the front end of your Ram TRX the utility and menacing look that accompanies the Addictive Desert Designs Bomber Front Bumper. The modern plate steel design brings aggressive styling while keeping clearance loss at a minimum. The center plate features inset mounting points for three Baja Designs LP6 round lights, while each side panel provides a cube light mounting point for Rigid Radiance Pods or other brands. The Bomber does not interfere with any of the factory features of the TRX. Accommodations for OEM marker lights and parking sensors are seamlessly integrated into the bumper design, while the OEM tow hooks remain intact. Addictive Desert Designs leads the industry in fit and finish and this Ram TRX Front Bumper is no exception. The side wings follow the factory fender lines perfectly and the bumper sits almost flush to the front of the vehicle. A full 3/16 in. aluminum skid plate offers superior front end protection without adding unnecessary weight. As always, this product is fully bolt-on and made in America.

• Mounts for 3 Baja Designs LP6 round lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish

This Part Fits:

Transform the front of your Jeep with the Addictive Desert Designs Rock Fighter front bumper. The Rock Fighter is a stubby width bumper, meaning it will look good with any aftermarket fender you want to put on your JL. The patented universal light mount system in the center of the bumper allows you to mount any brand/size of light up to a 20 in. RDS or 5 cube lights. There are two additional cube light mounts on each top corner of the bumper. The two clevis mounts on the front of the bumper accept a 3/4 in. D-Ring and are reinforced to help out in tough situations. The Rock Fighter provides a greater approach angle to maximize offroad performance and two different top hoop options for even more front-end protection. This bumper is available with a low profile top hoop or a stinger. The main bumper structure comes in hammer black powder coat with satin black panels. This product is fully bolt-on and made in America.

• Mount For 20 in. Radius LED or 5 Cube Lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts
• Low Profile Top Hoop

This Part Fits:

The Bomber is a tight fitting front bumper for the new Bronco, that follows the contours of the body perfectly. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Rigid 360 6-inch lights (also available with Baja Designs Lighting. At the sides of the bumper are mounting points for cube lights, framed by satin black aluminum panels. The Bomber is constructed from modern plate steel, finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat. The approach angle of the Bomber is improved over the factory bumper, and provides higher clearance. The OEM parking sensors are incorporated into the design of the bumper. There are 2 heavily reinforced clevis mounts that accept soft shackles for recovery options. We offer an optional 3/16-inch vented aluminum skid plate that provides superior protection over the factory plastic skid plate. An Adaptive Cruise Control Relocation Bracket is also available, which allows you to retain full functionality of the feature. As always, this is fully bolt-on and Made in America.

• Mounts For Three Rigid 360 6 in. Lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Mounts For Cube Lights On Sides
• Parking Sensor Cutouts

This Part Fits:

The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30- in. radius LED light bar, which is partially protected by the top hoop. An additional 20- in. LED light bar can be mounted behind the central panel. Single 10 in. SR lights can be mounted behind each of the side panels. The HoneyBadger Raptor front bumper was designed to follow the body lines of the truck perfectly, while bringing a more aggressive edge to its stance. The steel is finished in a hammer black powder coat, while the aluminum panels are finished in a satin black powder coat. There are sensor holes to retain the OEM parking sensors, and sensor hole plugs are supplied if your Raptor does not have front sensors. The OEM tow hooks fit perfectly underneath the bumper.

• Mount For 30 Inch Radius Light Bar In Top Hoop
• Mounts For 10 in. Single Row Lights On Sides
• Mount For 20 Inch Light Bar In Center
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

This Part Fits:

The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30- in. radius LED light bar. An additional 20- in. LED light bar can be mounted behind the central panel. Single 10 in. SR lights can be mounted behind each of the side panels.The HoneyBadger Raptor front bumper was designed to follow the body lines of the truck perfectly, while bringing a more aggressive edge to its stance. The steel is finished in a hammer black powder coat, while the aluminum panels are finished in a satin black powder coat. There are sensor holes to retain the OEM parking sensors, and sensor hole plugs are supplied if your Raptor does not have front sensors. The OEM tow hooks fit perfectly underneath the bumper.

• Mount For 30 Inch Radius Light Bar In Top Hoop
• Mounts For 10 in. Single Row Lights On Sides
• Mount For 20 Inch Light Bar In Center
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

This Part Fits:

The Rock Fighter Front Bumper features a low-profile fitment, steel construction, and satin black accent panels. Our bumper includes a 3/16-inch aluminum skid plate with integrated air vents on the plate to ensure there's proper airflow to the intercooler. Our design retains the OEM parking sensors and intercooler. Add-on our Adaptive Cruise Control Relocation Bracket to maintain full use of your ACC capabilities. Additionally, the Shutter Motor Relocation Kit is necessary on 2024+ model years to ensure there are no check engine lights when removing lower grille shutters for bumper installation. The integrated light mount gives you the option of attaching a 20-inch dual row radius LED light bar or six cube lights in the center of the bumper. Finished in a two stage hammer black powder coat your front bumper will be protected from scratches. Made in America.

• Optional Adaptive Cruise Control Relocation Bracket To Retain ACC Functions
• Optional Shutter Motor Relocation Kit Required For 2024 - 2025 Model Years
• Center Mount For 20 in. Dual Row Radius Led Light Bar Or Six Cube Lights
• Features 3/16 in. Aluminum Skid Plate With Air Vents
• Durable 2-Stage Hammer Black Powder Coat Finish
• Satin Black Powder Coat Aluminum Accent Panels
• Constructed From High-Quality Steel
• Retains OEM Parking Sensors
• Fully Bolt-On Installation
• Retains OEM Intercooler
• Low-Profile Fitment
• Made In The USA

This Part Fits:

The Stealth Fighter has been our most popular line of bumpers, and for good reason. It is one of our tightest fitting bumpers and is synonymous with the Raptor in the off-road community. This was designed to closely follow the Raptor's body lines, and provides better ground clearance and approach angle than the OEM bumper. The front of the bumper sticks out only 1/2-inch further than the OEM bumper in order to fit LED lights within. The center light mount can accommodate either a 40-inch radius LED light bar, or up to 10 LED cube lights. There are 2 side mounts for Rigid 10-inch SR LED light bars on either side of the bumper for additional lighting. These mounts sit behind satin black aluminum panels with vented slots, so if you decide to not mount any side lights there are no empty holes in the bumper.

• Universal Plate/10 Dually
• Panel Color: Satin Black
• Bumper Color
• Hammer Black
• Satin Black
• 10 in. Led

This Part Fits:

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper. The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.

• Mounts For 4 Rigid 360 6 in. Round Lights
• Mounts for 4 RIGID 360 6" round lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Mounts For Cube Lights On Sides
• Parking Sensor Cutouts

This Part Fits:

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper. The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.

• Mounts For 3 Baja Designs Lp6 Round Lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Mounts For Cube Lights On Sides
• Parking Sensor Cutouts

This Part Fits:

The Stealth Fighter front bumper for the Ford F-150 is one of our tightest fitting and most aggressive looking bumpers on the market. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of your truck to match the factory design, while giving you the added protection of a steel plated bumper. The center of the bumper has a universal light mount system that allows you to mount up to 10 cube lights or a 40" radius or straight LED, or anything in between to give your F-150 the additional lighting setup that you need. Additional mounts for RIGID 10" SR LEDs behind the side panels give your truck even more lighting options.

• Direct Fit/No Cutting Or Welding Required
• Laser Cut Skid Plates/Tabs And Plates
• .120 in. Wall Steel Tube Construction
• Hammer Black powder coat finish
• Stainless Steel Hardware
• Fully Boxed Frame Horns

This Part Fits:

Our Black Label Front Bumper was designed to complement the factory style, and features unrivaled fitment and an easy installation. The Black Label line is the most affordable series we've ever released. At the center of the bumper is a mount for a 20-inch LED light bar for supplemental lighting on the trail or the worksite. The OEM parking sensors retain full functionality with integrated mounting points. The design retains full functionality of the adaptive cruise control feature without the need for a relocation bracket. The Black Label Front Bumper is finished in a hammer black powder coat, while the accent panels are finished in satin black. As always, this is fully bolt-on and Made in America.

• Durable 2-Stage Hammer Black Powder Coat
• Retains Adaptive Cruise Control
• Mount For 20 in. LED Light Bar
• Compatible With Super Cruise
• Retains OEM Parking Sensors
• Modern Plate Steel Design
• Satin Black Accent Panels
• Made In The USA
• 3 Piece Design

This Part Fits:

Combining aesthetics with functionality, the ADD PRO Bolt-On Ford Raptor front bumper doesnt sacrifice the look of your truck for approach angle. Our ADD PRO bumper gives your truck maximum approach angle for your off-road adventures without relocating your intercooler or cutting your frame. The ADD PRO front bumper truly contours the body lines of the Raptor without the need of a plastic valence. Built with .120 in. wall steel tubing for strength and durability and an aluminum skid plate for protection. Mounting options for lights underneath the main tube to keep them tucked away allow for up to 6 cube lights or a 20 in. radius LED bar.

• Universal Mounts Up To 6 Cube Lights Or 20 in. Radius Light Bar
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Hammer black powder coat

This Part Fits:

The Phantom front bumper boasts a low-profile and takes inspiration from prerunner bumpers. It features a lightweight 3/16-inch aluminum skid plate that delivers comprehensive protection without unnecessary bulk. The skid plate incorporates vented cutouts to ensure proper intercooler airflow, catering to both style and functionality. The Phantom provides lighting options, including a central 20-inch radius light bar mount and 10-inch SR light mounts positioned behind each side panel. The bumper includes sensor mounts to maintain the full functionality of your parking sensors. Installation requires an Adaptive Cruise Control relocation bracket. As always, this is fully bolt-on and Made in America.

• Retains Adaptive Cruise Control Function With Optional Acc Relocation Bracket
• Satin Black Powder Coat Aluminum Accent Panels
• Full-Size Aluminum Skid Plate With Air Vents
• Fits A 20 in. Radius LED Light Bar
• Fits Two 10 in. Sr LED Light Bars
• Hammer Black Powder Coat Steel
• Retains OEM Parking Sensors
• Plate Steel Construction
• Retains OEM Intercooler
• Low-Profile Fitment
• Knifes Edge Design
• Made In The USA

This Part Fits:

Combining aesthetics with functionality, the ADD PRO V2 frame cut Ford Raptor front bumper doesn't sacrifice the look of your truck for approach angle. Our ADD PRO V2 bumper is the a true high quality frame cut bumper for the Ford Raptor giving your truck maximum approach angle for your off-road adventures. The ADD PRO V2 front bumper truly contours the body lines of the Raptor without the need of a plastic valence. Built with .120 in. wall steel tubing for strength and durability and an aluminum skid plate for protection.

• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish

This Part Fits:

Combining aesthetics with functionality, the ADD PRO frame cut Ford Raptor front bumper doesn't sacrifice the look of your truck for approach angle. The ADD PRO front bumper contours the body lines of the Raptor. Built with .120 in." wall steel tubing for strength and durability and an aluminum skid plate for protection. Mounting options for lights underneath the main tube to keep them tucked away allow for up to 6 cube lights or a 20 in. radius LED bar.

• Universal Mount That Fits Up To 20 in. Light or 6 Cubes
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panels

This Part Fits:

The aggressive styling of the ADD HoneyBadger bumper truly transforms the front of your truck. Multiple lighting options include a radius 40" curved LED bar up top, straight 20" LED bar in the center, and one cube light mount behind each side panel. Added utility comes in the form of standard clevis mounts that accept 3/4" D-Rings as well as an optional winch mount. As always, this product is made in America.

• Made To Mold The Front Of Your Truck
• 3/16 in. Mild Steel Construction
• Top Mount: 40" RDS Light Bar
• Multiple Lighting Options
• Side Panel Inserts
• Winch Options
• D Ring Mounts

This Part Fits:

The Race Series Chase Rack brings a race-inspired look to the bed of your TRX. Sitting atop the rack is an actuator-controlled mounting point for a 50-inch light bar. This enables you to raise and lower your light bar to fit in your garage or other low-clearance places. It also allows you to cut down on wind drag on the streets or freeway where you don't need the light bar. This was constructed using high strength .120 in. wall steel tubing and lightweight CNC cut aluminum paneling. It is then powder coated with a 2-stage process to protect against rust. Installation is simple, as the chase rack bolts-on without any modifications needed to your truck bed. Hardware and wiring harnesses for both the actuator and light bar are included with the rack. And as always this is Made in America.

• Upper Mount: 50" LED Front Facing Light
• 50 in. Led Front Facing Light
• Light Actuator Kit
• Hammer Black
• Satin Black
• Panel Color
• Upper Mount

This Part Fits:

A redesigned Race Series R chase rack specifically made for the 2017 Ford Raptor adds a head turning style to your Ford Raptor. With all the same benefits and features of our original Race Series R chase rack, the 2017 Raptor version has an upgraded honeycomb style paneling to match the look of the 2017 Ford Raptor. The Race Series R chase rack gives your truck additional mounting options for lighting during those off-road night adventures. Featuring our light actuator kit to raise and lower a front facing Rigid Industries 50 in. LED bar so you can tuck it away when not in use. Light mount tabs for rear facing Duallys provide your Ford Raptor with some additional lighting for anything behind your truck.

• Hammer Black Powder Coat finish With Satin Black Panels
• Mount For 50 in. Rear Facing Light Bar
• Panel Color: Satin Black
• Light Actuator Kit

This Part Fits:

The Ford F-150/Raptor Stealth Fighter Chase Rack is the perfect way to add style to your Raptor without adding bulk. The fully bolt-on design is easy to install with no drilling required, and the mounting slots on the upper piece make it easy to add extra lighting with a 50-inch LED light bar. Third brake light function is fully retained and no bed space is sacrificed. The Stealth Fighter is finished in a hammer black powder coat and as always, Made in America.

• Mounting Slots For Up To A 20 in. Light Bar
• Hammer Black Powder Coat Finish
• 50" light bar mount

This Part Fits:

The Capture fairlead system holds your hook in place when not in use, giving you the ultimate form and function. Our hook capture system keeps your hook from dangling outside your vehicle making a clean and low profile front end. Built from 1 5/16 in. thick CNC machined high quality aerospace aluminum the Capture fairlead is rated for up to 20,000 lbs to help with all your Winching needs. Available in raw aluminum or a military grade hard anodized black finish to withstand everyday use. Fits nearly any aftermarket Winch front bumper. For synthetic Winch rope only.

• CNC Machined From High Quality Aerospace Aluminum
• Black Military Grade Hard Anodized Finish
• For Synthetic Winch Rope Only
• Rated For Up To 20000 lbs

The ADD Capture 2 Fairlead is available in Open Hook (rated to 20,000 lbs) and Closed Hook (rated to 30,000 lbs) configurations. CNC machined from 7075-T6 billet aluminum, it features a patented interlocking design that secures the recovery hook under load. The low-profile build minimizes stick-out distance while maintaining full material thickness and strength. Finished in hard black anodize with a baked top coating, laser-etched detailing, and color-matched black stainless steel hardware. Independent third-party tested. Universal fitment for common winch applications. For synthetic winch rope only.

• The Low-Profile Compact Design Minimizes Stick out Distance While Maximizing Material Thickness And Strength
• Durable And Long Lasting Hard Black Anodized Finish Custom Baked On Top Coating And Laser Etched Detailing
• CNC Machined From 7075-T6 Billet Aluminum For A Perfect Balance Of Strength And Weight (Not Cast Junk)
• Features A Precise Patented Interlocking Design That Secures Your Recovery Hook In Every Condition
• Independent 3rd Party Tested To Ensure Quality And Strength Under Extreme Use
• Universal Compatibility For The Most Common And Popular Winch Applications
• Open Hook Design Rated To 20,000lbs (What's your truck weigh?...)
• Available in Either Open Hook or Closed Hook Configurations
• Includes Color Matched Black Stainless Steel Hardware
• Closed Hook Design Rated To 30,000lbs
• For Synthetic Winch Rope Only
• Quality You Can Trust

Our Clevis D-Ring Mounted Front License Plate Bracket was designed to easily mount a front license plate bracket on an off-road bumper. It is also easily removable for optimal ground clearance when going off-road. If left installed while off-road, it will swivel if you strike an obstacle to help prevent damaging the mount. It is adjustable for universal clevis mount fitment, and can also be configured for different heights. The mount is finished in a durable 2-stage hammer-black powder coat, and is made in the USA.

• Mount Swivels In Case Of Contact With Obstacles Off-Road
• Mounting Configurations For Different Heights
• Mounts To D-Ring Mounts With 1 in. Hole
• Includes Stainless Steel Hardware
• Perfect For Front License Plates
• Adjustable For Universal Fitment
• 2-Stage Hammer Black Powder Coat
• Easily Removable For The Trails
• Made In The USA

Front license plate bracket for the Jeep Wrangler JL, Jeep Wrangler JK, and Jeep Gladiator JT. Only works with Addictive Desert Designs Stealth Fighter front bumpers.

• For Use With Stealth Fighter Front Bumpers
• Hammer Black Powder Coat Finish

This Part Fits:

This bracket was designed to relocate your Adaptive Cruise Control module to a position behind the grille. This is necessary to retain full functionality when running an aftermarket bumper on your 2023+ Ford Super Duty. As always, this is Made in America.

• Allows Use Of Adaptive Cruise Control System With Aftermarket Bumpers
• Relocates Adaptive Cruise Control Module Into Grille
• Hammer Black Powder Coat Finish
• Made From 1/8 in. Aluminum
• Made In America
• Fully Bolt-On

This Part Fits:

Our Ditch Light Brackets provide supplemental lighting for worksites and off-road use, accommodating lights ranging from 3 in. Rigid cube lights to Baja Designs LP6. These brackets are made from ?-inch steel with a hammer black powder coat finish for style and protection. They attach to hood hinges near the a-pillar, avoiding obstruction of the sightline, and allow for adjustable light positioning. Made in America.

• Mounts Up To 6in. LED Lights
• Driver/Passenger Side Pair
• Mounts up to 6" LED Lights
• Hammer Black powder coat
• Installs To Hood Hinge
• 1/8 in. American Steel
• Made In The USA
• Fully Bolt-On

This Part Fits:

The 4th Gen Tacoma Skid Plate is specifically designed for our Stealth Center Mount Winch Front Bumper. The plate protects your trucks front undercarriage. Installation is straightforward due to the plate's bolt-on no cutting required design. Constructed with durable lightweight 3/16-inch aluminum. Finished with a satin black powder coat. Designed and made in America. *Please Note: Skid plate is only compatible with the Stealth Center Mount Winch Front Bumper

• Skid Plate Designed For The Stealth Series Center Mount Winch Front Bumper
• Compatible With OEM Sensors / Front Camera And Adaptive Cruise Control
• 3/16 in. Aluminum Construction
• Satin Black Powder Coat Finish
• Fully Bolt-On Installation
• Mounting Hardware Included
• 3/16 Aluminum Construction
• Made In The USA

This Part Fits: