Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
82 products
82 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$298.98
2025 Ram RHO Addictive Desert Designs Adaptive Cruise Control Relocation Bracket
Installation Instructions- Mounts Behind Grille
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025 | Ram | 1500 | Big Horn |
| 2025 | Ram | 1500 | Laramie |
| 2025 | Ram | 1500 | Limited |
| 2025 | Ram | 1500 | Limited Longhorn |
| 2025 | Ram | 1500 | Lone Star |
| 2025 | Ram | 1500 | Rebel |
| 2025 | Ram | 1500 | RHO |
| 2025 | Ram | 1500 | Special Service |
| 2025 | Ram | 1500 | Tradesman |
| 2025 | Ram | 1500 | Tradesman HFE |
| 2025 | Ram | 1500 | Tungsten |
| 2025 | Ram | 1500 | Warlock |
$198.98
Our Ditch Light Brackets were designed for versatile forward or side angled lighting. The light brackets mount to the hood hinges and are positioned out of your sight lines at the base of the a-pillar. Lighting options include anything from a 3 in. Rigid or Baja cube light to a Rigid 360 or Baja Designs LP6 round light. They feature low-profile fitment that compliments the OEM body lines. Integrated wire management keeps the install looking clean. As always, these are fully bolt-on and Made in America.
Installation Instructions- Mounts LED Light Pods Up To 6 in.
- Locates Pod Light Near A-Pillar
- Driver/Passenger Side Pair
- Integrated Wire Management
- Hammer Black powder coat
- Installs To Hood Hinge
- 1/8 in. American Steel
- Made In The USA
- Fully Bolt-On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ram | 1500 | TRX |
$128.98
Our Digital Device Dash Mount provides a versatile surface for mounting your digital device holders & other accessories. Compatible with Ram Mounts, this plate helps you organize your devices at arms reach. It is perfect for smartphones, action cameras, GPS, radios, tablets, and more. Towards the side of the plate is a cutaway that provides easy access to the OEM 12v port. This heavy-duty steel plate was designed to fit flush with the factory bodylines of your truck's interior. The device mounting points feature PEM nuts to easily install your device holders using 10-24 accessory bolts. As always, this is fully bolt-on and Made in America.
Installation Instructions- Perfect For Mounting Smartphones - Gps - Radio - Tablet And Other Devices
- Perfect for Mounting Smartphones, GPS, Radio, Tablet, & Other Devices
- Two-Stage Hammer Black Powder Coat Finish
- 1/8 in. American Steel Construction
- PEM Nuts For 10-24 Accessory Bolts
- Easy Access To OEM 12V Port
- Retains Oem Dash Speaker
- Ram Mounts Compatible
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | HFE |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2020-2021 | Ram | 1500 | Special Service |
| 2019-2024 | Ram | 1500 | Tradesman |
| 2021-2024 | Ram | 1500 | TRX |
| 2021 | Ram | 1500 | TRX Launch Edition |
$148.98
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2026 | Chevrolet | Silverado 1500 | Custom |
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2026 | Chevrolet | Silverado 1500 | LT |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2019-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2026 | Chevrolet | Silverado 1500 | WT |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2020-2026 | Chevrolet | Silverado 2500 HD | Custom |
| 2019-2026 | Chevrolet | Silverado 2500 HD | High Country |
| 2019-2026 | Chevrolet | Silverado 2500 HD | LT |
| 2019-2026 | Chevrolet | Silverado 2500 HD | LTZ |
| 2019-2026 | Chevrolet | Silverado 2500 HD | WT |
| 2024-2026 | Chevrolet | Silverado 2500 HD | ZR2 |
| 2019-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2019-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2019-2026 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
| 2020-2026 | GMC | Sierra 2500 HD | AT4 |
| 2024-2026 | GMC | Sierra 2500 HD | AT4X |
| 2019-2021 | GMC | Sierra 2500 HD | Base |
| 2019-2026 | GMC | Sierra 2500 HD | Denali |
| 2024-2026 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2026 | GMC | Sierra 2500 HD | Pro |
| 2019-2026 | GMC | Sierra 2500 HD | SLE |
| 2019-2026 | GMC | Sierra 2500 HD | SLT |
$798.98
The Rock Fighter is both sturdy enough to absorb impacts in rugged terrain, while protecting your vehicle's essential components and undercarriage from dirt and debris. Its satin black powder coat finish adds style as well as protection from weather elements like salt, corrosion, and rust. And because it's made in America, you can trust its quality and durability - on and off the road!
Installation Instructions- For Use With Rock Fighter And Bomber Front Bumper
- For use with Rock Fighter & Bomber front bumper
- High Grade 3/16 in. Aluminum Alloy
- Satin Black Powder Coat Finish
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2025 | Ford | Bronco | Raptor |
$198.98
This bracket was designed to relocate the Adaptive Cruise Control sensor behind the grille to make room for your ADD Offroad Bronco Front Bumper. This bracket could also be used for other aftermarket front bumpers; but why would you want to buy anything but American Made ADD bumpers for your Bronco??
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$158.98
Our Frame Horn Gusset Kit was engineered to reinforce the Bronco & Bronco Raptor's failure prone OEM frame horn mounts. 6th gen Broncos have been known to take damage to the frame horn when using a winch or tow hooks during recovery scenarios. This kit installs to the frame horn using heavy duty grade 8 hardware. This enables you to run your stock or aftermarket front bumper's winch and other recovery points with confidence. The heavy duty 1018 steel is finished in a dual-stage hammer black powder coat, and features a fully bolt-on installation. As always, this is Made in America.
Installation Instructions- Intended For Use With Winch Capable Or Recovery Point Integrated Bumpers
- Reinforces The Failure Prone OEM Frame Horn Mounts
- Includes Heavy Duty Grade 8 Hardware
- Fully Bolt-On Installation
- Hammer Black powder coat
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$418.98
The Rear Window Molle Storage Panels offer a convenient and organized storage solution for the Bronco. Flexible mounting options allow you to strap, bolt, or clip items onto them. Whether you are storing tools, first aid kits, recovery gear, or other essentials, these panels keep everything within reach. The panels were designed to fit perfectly in the Bronco's rear roll bar for a finished look and can be used with or without a hard top. Sturdy mounting points eliminate rattling while also providing the strength needed to carry your gear. Factory mounting points are used for installation, meaning no modifications to your vehicle are required. This product is made in America.
Installation Instructions- Constructed From 1/8Th Inch Heavy-Duty American Made Steel
- Includes Passenger And Driver-Side Panels
- Conforms To The Shape Of The Bronco
- Use With Or Without A Hardtop
- Hammer Black powder coat
- Made In America
- Fully Bolt-On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$298.98
Our Bronco Tailgate Molle Panel was designed to provide additional storage opportunities in the cargo area. Mounting flush against the tailgate, the panel is an excellent solution for mounting items such as recovery gear, pouches, a fire extinguisher, or any other gear you need on the road. Our molle pattern is compatible with a variety of attachment systems such as straps, bolts, quick-fists or even zip ties. Manufactured from 1/8-inch steel and finished in a hammer black powder coat, the panel maintains rigidity even while driving on rough terrain. Its wide mounting points keeps the panel flush with the shape of the tailgate and a horizontal offset keeps it from contacting the paint. As always, this is fully bolt-on and made in America.
Installation Instructions- Mounting Solutions (Straps, Bolts, Quick-Fists, etc.)
- 2-Stage Hammer Black Powder Coat
- Steel And Aluminum Construction
- Satin black powder coat
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$148.98
The Dual Ditch Light Brackets are able to mount either one or two pod lights on each side of the hood cowl near the a-pillar. Each light is able to be pointed independently, allowing for forward facing and side facing configurations simultaneously, giving you a line of sight in dark conditions. Alternatively, you can run a clear pod for normal lighting and an amber pod for dusty scenarios on each bracket. These pod light brackets mount to existing factory locations for an entirely bolt-on installation. As always, this is made in America
Installation Instructions- Mounts 2 Up To 4 in. LED Pod Lights On Each Side Or A Single 6 in. Round LED Light
- Two-Stage Hammer Black Powder Coat Finish
- 3/16 in. American Steel Construction
- Integrated Wire Management
- Low Profile Fitment
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$798.98
The Bomber Front Skid Plate was designed to replace the plastic OEM skid plate, and flow with the contours of our Bomber Bronco Front Bumper. It is constructed from 3/16-inch aluminum alloy, and finished in a satin black powder coat to protect it from rust. This skid plate can protect the front underbelly of you Bronco in a way that plastic can not. As always, this is fully bolt-on and Made in America.
Installation Instructions- High Grade 3/16 in. Aluminum Alloy
- For Use With Bomber Front Bumper
- Satin Black Powder Coat Finish
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$268.98
This bracket was designed to relocate the Adaptive Cruise Control sensor behind the grille to make room for your ADD Offroad Bronco Front Bumper. This bracket could also be used for other aftermarket front bumpers; but why would you want to buy anything but American Made ADD bumpers for your Bronco?? The bracket can either be oriented lower or higher on the grille. The primary position is the lower orientation, where it retains near OEM functionality. Alternatively, if you've installed any aftermarket accessories that extend above the bumper in front of the sensor; it can be installed further up in the grille. As always, this is fully bolt-on and Made in the USA.
Installation Instructions- Retains ACC Function w/Aftermarket Bumpers
- Hammer Black
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor |
$298.98
Relocates your adaptive cruise control module on your Ford F-150 to be compatible with all Addictive Desert Designs front bumpers.
Installation Instructions- Satin black powder coat
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$468.98
Our Bed Side Molle Panels optimize the cargo storage capabilities of your truck bed. Engineered for off-road durability and keeping your gear secure, these storage panels are compatible with various attachment systems. You can secure your gear to these panels with molle mounts, straps, bolts, or tie-down straps. Choose from several configurations for the driver side, passenger side, or both sides to maximize your vertical storage - and leave the bed floor clear for larger cargo. Our panels are unrivaled in their fitment, as the very closely follow the contours of the truck bed. Constructed from American steel and finished in a durable 2-stage hammer black powder coat, these molle panels add secure storage for essentials like shovels, hi-lift jacks, fluid tanks, recovery gear, and more. The panels mount to the bed at several points, ensuring rigidity on rough terrain. Even so, they are easily removable when needed. As always, these are fully bolt-on and Made in America. This modular system allows for you to run 4 configurations on driver side, passenger side, or both: Front Bed Panel Only / Rear Bed Panel Only / Front & Rear Bed Panels Only / Front, Center, & Rear Bed Panels for Full Bed Length Coverage * Please Note: The front panels can be installed to either the driver or passenger sides. All other panels are unique to each side of the truck, and will only install to its dedicated side. ** Please Note: Center panel cannot be installed on its own. It requires BOTH the front and rear panels for installation. ** Fitment Note: These are compatible with the 5.5' Short Bed Only.
Installation Instructions- Includes Optional Molle Expansion Panel To Cover Electrical Box If Desired
- Driver And Passenger Side Panels Kits Are Available
- Dual Stage Durable Hammer Black Powder Coat Finish
- Molle Pattern Offers Diverse Mounting Solutions
- Retains Access To OEM Electrical Panel Box
- Profiled To Follow Contours Of Truck Bed
- Offers Additional Tie-Down Options
- Retains Factory Tie-Down Access
- High Quality American Steel
- Fully Bolt-On Installation
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$498.98
Our Bed Side Molle Panels optimize the cargo storage capabilities of your truck bed. Engineered for off-road durability and keeping your gear secure, these storage panels are compatible with various attachment systems. You can secure your gear to these panels with molle mounts, straps, bolts, or tie-down straps. Choose from several configurations for the driver side, passenger side, or both sides to maximize your vertical storage - and leave the bed floor clear for larger cargo. Our panels are unrivaled in their fitment, as the very closely follow the contours of the truck bed. Constructed from American steel and finished in a durable 2-stage hammer black powder coat, these molle panels add secure storage for essentials like shovels, hi-lift jacks, fluid tanks, recovery gear, and more. The panels mount to the bed at several points, ensuring rigidity on rough terrain. Even so, they are easily removable when needed. As always, these are fully bolt-on and Made in America. This modular system allows for you to run 4 configurations on driver side, passenger side, or both: Front Bed Panel Only / Rear Bed Panel Only / Front & Rear Bed Panels Only / Front, Center, & Rear Bed Panels for Full Bed Length Coverage * Please Note: The front panels can be installed to either the driver or passenger sides. All other panels are unique to each side of the truck, and will only install to its dedicated side. ** Please Note: Center panel cannot be installed on its own. It requires BOTH the front and rear panels for installation. ** Fitment Note: These are compatible with the 5.5' Short Bed Only.
Installation Instructions- Includes Optional Molle Expansion Panel To Cover Electrical Box If Desired
- Driver And Passenger Side Panels Kits Are Available
- Dual Stage Durable Hammer Black Powder Coat Finish
- Driver & Passenger Side Panels Kits are Available
- Molle Pattern Offers Diverse Mounting Solutions
- Retains Access To OEM Electrical Panel Box
- Profiled To Follow Contours Of Truck Bed
- Offers Additional Tie-Down Options
- Retains Factory Tie-Down Access
- High Quality American Steel
- Fully Bolt-On Installation
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$198.98
Illuminate your off-road adventures with our Ditch Light Brackets. Manufactured from 1/8-inch American steel and coated in a durable 2-stage black powder finish, these light mounts match your truck's styling. The light brackets are designed to mount to the hood hinges, positioning cube or round lights near the A-pillar. They are compatible with a variety of 3-6 inch LED lights from quality brands like Rigid and Baja Designs. Lights can be angled forward to light your path ahead, or towards the sides to enhance visibility around corners and obstacles. Integrated wire channels keep wiring neatly tucked out of view for a clean install. And as always, these are fully bolt-on and Made in America. * Please Note: Some light configurations may require wiper blade arm adjustment.
Installation Instructions- Mounts LED Light Pods Up To 6 in.
- 2-Stage Hammer Black Powder Coat
- Locates Pod Light Near A-Pillar
- Driver/Passenger Side Pair
- Integrated Wire Management
- Installs To Hood Hinge
- 1/8 in. American Steel
- Made In The USA
- Fully Bolt-On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$298.98
Relocates your adaptive cruise control module on your 2024+ Ford F-150 to be compatible with all Addictive Desert Designs front bumpers, and can be used in conjunction with most other aftermarket front bumpers.
Installation Instructions- **Adaptive cruise control not compatible with Platinum, King Ranch models, or brush nickel finished grilles
- Satin Black Powder Coat Finish
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | F-150 | King Ranch |
| 2024-2025 | Ford | F-150 | Lariat |
| 2024-2025 | Ford | F-150 | Platinum |
| 2024-2025 | Ford | F-150 | Police Responder |
| 2024-2026 | Ford | F-150 | Raptor |
| 2024-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2024-2025 | Ford | F-150 | Tremor |
| 2024-2025 | Ford | F-150 | XL |
| 2024-2025 | Ford | F-150 | XLT |
$298.98
Relocates your adaptive cruise control module on your Ford F-150/Raptor/Super Duty to be compatible with all Addictive Desert Designs front bumpers.
- Satin black powder coat
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
| 2015-2025 | Ford | F-250 Super Duty | King Ranch |
| 2015-2025 | Ford | F-250 Super Duty | Lariat |
| 2018-2024 | Ford | F-250 Super Duty | Limited |
| 2015-2025 | Ford | F-250 Super Duty | Platinum |
| 2015-2025 | Ford | F-250 Super Duty | XL |
| 2015-2025 | Ford | F-250 Super Duty | XLT |
| 2015-2025 | Ford | F-350 Super Duty | King Ranch |
| 2015-2025 | Ford | F-350 Super Duty | Lariat |
| 2018-2024 | Ford | F-350 Super Duty | Limited |
| 2015-2025 | Ford | F-350 Super Duty | Platinum |
| 2015-2025 | Ford | F-350 Super Duty | XL |
| 2015-2025 | Ford | F-350 Super Duty | XLT |
| 2019-2025 | Ford | Ranger | Lariat |
| 2024-2025 | Ford | Ranger | Raptor |
| 2019-2025 | Ford | Ranger | XL |
| 2019-2025 | Ford | Ranger | XLT |
$108.98
These light brackets mount in a low profile position to both the driver and passenger side hood hinges, keeping them out of your sightlines. They can be oriented forward or off to the side to be used as ditch lights. Capable of mounting a single 3-inch cube light on up to a 6-inch round light, they maintain rigidity on or off the road. The light brackets were designed for clean wire management. Made from 3/16-inch American steel and finished in a durable 2-stage hammer black powder coat, these are fully bolt on and Made in the USA.
Installation Instructions- Mounts LED Light Pods Up To 6 in.
- 2-Stage Hammer Black Powder Coat
- Locates Pod Light Near A-Pillar
- Driver/Passenger Side Pair
- Integrated Wire Management
- 3/16 in. American Steel
- Installs To Hood Hinge
- 3/16 American Steel
- Made In The USA
- Fully Bolt-On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Chevrolet | Silverado 1500 | Custom |
| 2022-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2022-2026 | Chevrolet | Silverado 1500 | High Country |
| 2022-2026 | Chevrolet | Silverado 1500 | LT |
| 2022-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2022-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2022-2026 | Chevrolet | Silverado 1500 | RST |
| 2022-2026 | Chevrolet | Silverado 1500 | WT |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2022-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2022-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2022-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2022-2026 | GMC | Sierra 1500 | SLE |
| 2022-2026 | GMC | Sierra 1500 | SLT |
$268.98
Our Adaptive Cruise Control Relocation Bracket allows you to retain your truck's ACC functions when mounting after-market front bumpers. Its fine tunability and dual position mounting capabilities provide a wide compatibility range for after-market accessories. Designed to mount behind your trucks grille and finished with a durable two-stage hammer black powder coat. Made in America.
Installation Instructions- Retains ACC Functionality For After-Market Front Bumpers
- Dual Position Mounting Capabilities
- 2-Stage Hammer Black Powder Coat
- Adjustable For Fine Tunability
- Mounts Behind Grille
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor |
$58.98
Our Raptor Shutter Motor Relocation Kit keeps your motor active when removing lower grille shutters to ensure there are no dash lights when installing an after-market bumper. This kit is necessary for any 2024+ Raptor with an ADD front bumper. Features a brushed aluminum finish and a low-profile fitment. Made in America.
- Relocates Shutter Motor For After-Market Bumpers
- Brushed Aluminum Finish
- Discreet Mounting
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor |
$158.98
Illuminate your path with our Ditch Light Brackets. Crafted from durable 1/8-inch steel and finished in a sleek, black powder coat, they complement the body style. The brackets mount to the hood hinges, positioning the light near the A-pillar to keep them from obstructing your sightline. Lighting options include anything from a 3 in. Rigid or Baja cube light to a Rigid 360 or Baja Designs LP6 round light. The lights can be pointed forward or angled towards the side depending on your application. As always, these are Made in America. * Please Note: A 2-inch stubby antenna, or removal of the factory antenna, is required to run larger lights like the LP4, LP6, 6-inch Rigid 360s, or other similar sized lights.
Installation Instructions- Mounts LED Light Pods Up To 6 in.
- Locates Pod Light Near A-Pillar
- Driver/Passenger Side Pair
- Integrated Wire Management
- Hammer Black powder coat
- Installs To Hood Hinge
- 1/8 in. American Steel
- Made In The USA
- Fully Bolt-On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
Showing 82/82
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.