Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1976 products
1976 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$43.00
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-80782, 51-80782-E, 54-80782, & 75-80782-0
- Resonator Plug For Inlet Tube -If No Resonator Cap Off With Plug
- This Kit Will Only Fit aFe Items w/Skus Ending w/-80782
- Coupler Hose Allows For Expansion/Movement/Vibration
- Foam Gasket For MAS Air Flow Sensor
- Silicone Couplings
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2004 | Chevrolet | Silverado 2500 HD | Base |
| 2001-2004 | Chevrolet | Silverado 2500 HD | LS |
| 2001-2004 | Chevrolet | Silverado 2500 HD | LT |
| 2004 | Chevrolet | Silverado 2500 HD | WT |
| 2001-2004 | Chevrolet | Silverado 3500 | Base |
| 2001-2004 | Chevrolet | Silverado 3500 | LS |
| 2001-2004 | Chevrolet | Silverado 3500 | LT |
| 2004 | Chevrolet | Silverado 3500 | WT |
| 2002-2004 | GMC | Sierra 2500 HD | Base |
| 2001-2002 | GMC | Sierra 2500 HD | SL |
| 2001-2004 | GMC | Sierra 2500 HD | SLE |
| 2001-2004 | GMC | Sierra 2500 HD | SLT |
| 2003-2004 | GMC | Sierra 2500 HD | WT |
| 2002-2004 | GMC | Sierra 3500 | Base |
| 2001-2002 | GMC | Sierra 3500 | SL |
| 2001-2004 | GMC | Sierra 3500 | SLE |
| 2001-2004 | GMC | Sierra 3500 | SLT |
| 2004 | GMC | Sierra 3500 | WT |
$124.00
This turbo inlet is the perfect addition to your aFe air intake system. It removes restriction of the factory turbo inlet and guarantees increased air flow for maximum power. It provides a smooth transition for the air from the aFe air intake tube to the turbo with minimum restriction. The cast aluminum design has CNC machined ends for a perfect fit and finish. The part is anodized black for durability and a stealthy appearance. This turbo inlet utilizes a flexible silicone coupling that is reinforced with two layers of polyester material, making it resistant to wear and deterioration. The silicone coupling mates directly to the aluminum turbo adapter and the aFe air intake tube. All necessary clamps are provided. This turbo inlet utilizes the factory O-Ring and screw and comes with the necessary clamps and coupler to fit perfectly with your aFe air intake system.
Installation Instructions- Oversized 3” Inlet Improves Air Flow To The Turbo For Maximum Power
- CNC Machined Cast Aluminum Construction With A Black Anodized Finish
- Black Reinforced Silicone Coupling Connects To 3” aFe Air Intakes
- Outflows Factory Turbo Inlet by 10% (Turbo Inlet Only)
- Measured Flow: 235 CFM @ 7” H20 (Turbo Inlet Only)
- Is Only Compatible with aFe Air Intake Systems
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Audi | A3 | Premium |
| 2015-2020 | Audi | A3 | Premium Plus |
| 2015-2019 | Audi | A3 | Prestige |
| 2019 | Audi | A3 | Titanium |
| 2020 | Audi | S3 | Premium |
| 2015-2020 | Audi | S3 | Premium Plus |
| 2015-2019 | Audi | S3 | Prestige |
| 2016 | Volkswagen | Golf | Base |
| 2015 | Volkswagen | Golf | Launch Edition |
| 2015-2018 | Volkswagen | Golf | S |
| 2015-2016,2018 | Volkswagen | Golf | SE |
| 2015-2016 | Volkswagen | Golf | SEL |
| 2017 | Volkswagen | Golf | Wolfsburg Edition |
| 2015-2019 | Volkswagen | Golf R | Base |
| 2015-2021 | Volkswagen | GTI | Autobahn |
| 2019 | Volkswagen | GTI | Rabbit Edition |
| 2015-2021 | Volkswagen | GTI | S |
| 2015-2021 | Volkswagen | GTI | SE |
| 2017 | Volkswagen | GTI | Sport |
| 2019 | Volkswagen | Jetta | GLI 35th Anniversary Edition |
| 2019-2023 | Volkswagen | Jetta | GLI Autobahn |
| 2019-2021 | Volkswagen | Jetta | GLI S |
$410.00
These turbo inlets are the perfect addition to any aFe POWER air intake. They remove the air flow restriction of the factory turbo inlets and guarantee maximum air flow to the turbos for maximum power. They provide a smooth transition for the air from the air intake system to the turbos with minimum restriction. This system is precisely designed on CAD software for perfect fitment and maximize the air flow path to the turbos. The tubes are constructed of high-quality cross-linked polyethylene (XLPE) to resist heat and impact. Stainless steel rings are pressed in the tube ends to protect the tubes from collapsing under pressure and heat. Silicone couplings are reinforced with molded ribs offering heat resistance and excellent protection against wear and deterioration, and mate directly to the turbos. Stainless steel clamps are also provided to guarantee perfect seal years after years. aFe POWER engineers spent countless hours and created multiple 3D printed prototypes to guarantee perfect fitment while producing maximum power. Each iteration has been tested on our in-house dyno alongside extensive road testing both on the street and off-road, to make certain these turbo inlet tubes will perform in any situation. This kit comes with all necessary fittings pre-installed on the tubes for a fast and easy installation. All factory connections are maintained to ensure your truck runs perfectly. These turbo inlets works perfectly with all aFe POWER air intake systems as well as the factory air intake system.
Installation Instructions- Durable XLPE Polymer Construction is Heat and Impact Resistant
- Black Silicone Reinforced Couplings Connects To Factory Turbos
- Fits with All aFe POWER Air Intake As Well As With Factory
- Improves Air Flow To The Turbos For Maximum Power
- Direct Fit Install with No Modifications Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2022 | Ford | Expedition | King Ranch |
| 2018-2022 | Ford | Expedition | Limited |
| 2020-2022 | Ford | Expedition | Max King Ranch |
| 2018-2022 | Ford | Expedition | Max Limited |
| 2018-2022 | Ford | Expedition | Max Platinum |
| 2018-2021 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2021 | Ford | Expedition | Max XLT |
| 2018-2022 | Ford | Expedition | Platinum |
| 2018-2022 | Ford | Expedition | SSV |
| 2022 | Ford | Expedition | Timberline |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2018-2022 | Ford | Expedition | XLT |
| 2017-2020 | Ford | F-150 | King Ranch |
| 2017-2020 | Ford | F-150 | Lariat |
| 2017-2020 | Ford | F-150 | Limited |
| 2017-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | SSV |
| 2017-2020 | Ford | F-150 | XL |
| 2017-2020 | Ford | F-150 | XLT |
| 2019-2022 | Lincoln | Navigator | Base |
| 2018-2022 | Lincoln | Navigator | Black Label |
| 2018-2021 | Lincoln | Navigator | L Black Label |
| 2020-2021 | Lincoln | Navigator | L Livery |
| 2018-2022 | Lincoln | Navigator | L Reserve |
| 2018-2019 | Lincoln | Navigator | L Select |
| 2018 | Lincoln | Navigator | Premiere |
| 2018-2022 | Lincoln | Navigator | Reserve |
| 2018-2019 | Lincoln | Navigator | Select |
$149.00
This turbo inlet is the perfect addition to the Takeda intake. It removes the air flow restriction of the factory turbo inlet and guarantees the maximum air flow to the turbo for maximum power. It provides a smooth transition for the air from the Takeda air intake tube to the turbo with the minimum restriction. Precisely CNC machined out of 6061-T6 billet aluminum, the adapter mounts directly onto the turbo and guides the increased air flow from the Takeda intake into the turbo. It is black anodized for durability and a stealthy appearance. This turbo inlet utilizes a flexible silicone coupling that is reinforced with three layers of polyester material, making it resistant to wear and deterioration. The silicone coupling mates directly to the aluminum turbo adapter and the Takeda air intake tube. All necessary clamps are provided. All necessary clamps and hardware are provided for a fast and easy installation. The factory harness bracket mounts directly onto the aluminum adapter for perfect fitment. This item will only fit with Takeda air intake systems P/N: 56-10021D , 56-10021R, 56-70021D and 56-70021R . It will NOT fit with the factory air intake system. For use with factory air intake system, see part number 59-20001.
Installation Instructions- Turbo Adapter CNC Machined From 6061-T6 Billet Aluminum And Black Anodized
- Black Silicone Reinforced Coupling Connects To Factory Intake Tube
- Outflows Factory Turbo Inlet by 26% (Turbo Inlet Only)
- Measured Flow: 295 CFM @ 7" H20 (Turbo Inlet Only)
- Direct Fit Install with No Modifications Required
- Improves Air Flow To The Turbo For Maximum Power
- Fits only with Takeda air intake system
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Hyundai | Elantra N | Base |
| 2022-2023 | Hyundai | Kona N | Base |
| 2019-2022 | Hyundai | Veloster N | Base |
$155.00
This turbo inlet removes the air flow restriction of the factory turbo inlet and guarantees the maximum air flow to the turbo for maximum power. It provides a smooth transition for the air from the factory air intake tube to the turbo with the minimum restriction. Precisely CNC machined out of 6061-T6 billet aluminum, the adapter mounts directly onto the turbo and guides the increased air flow from the Takeda intake into the turbo. . It is black anodized for durability and a stealthy appearance. This turbo inlet utilizes a flexible silicone coupling that is reinforced with three layers of polyester material, making it resistant to wear and deterioration. The silicone coupling mates directly to the aluminum turbo adapter and the factory air intake tube. All necessary clamps are provided. All necessary clamps and hardware are provided for a fast and easy installation. The factory harness bracket mounts directly onto the aluminum adapter for perfect fitment. This item will only fit with the factory air intake system. It will NOT fit with Takeda air intake systems P/N: 56-10021D, 56-10021R, 56-70021D and 56-70021R. For use with Takeda air intake system, see part number 59-20002.
Installation Instructions- Turbo Adapter CNC Machined From 6061-T6 Billet Aluminum And Black Anodized
- Black Silicone Reinforced Coupling Connects To Factory Intake Tube
- Outflows Factory Turbo inlet by 19% (Turbo Inlet Only)
- Measured Flow: 280 CFM @ 7" H20 (Turbo Inlet Only)
- Direct Fit Install with No Modifications Required
- Improve Air Flow To The Turbo For Maximum Power
- Fits only with Factory air intake system
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | Hyundai | Kona N | Base |
| 2019-2022 | Hyundai | Veloster N | Base |
$43.00
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-11332, 51-11332-E, 54-11332 & 75-11332
- This Kit Will Only Fit aFe Items w/Skus Ending w/-11332
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2010 | Chevrolet | Silverado 2500 HD | LT |
| 2007-2010 | Chevrolet | Silverado 2500 HD | LTZ |
| 2007-2010 | Chevrolet | Silverado 2500 HD | WT |
| 2007-2010 | Chevrolet | Silverado 3500 HD | LT |
| 2007-2010 | Chevrolet | Silverado 3500 HD | LTZ |
| 2007-2010 | Chevrolet | Silverado 3500 HD | WT |
| 2007-2010 | GMC | Sierra 2500 HD | SLE |
| 2007-2010 | GMC | Sierra 2500 HD | SLT |
| 2007-2010 | GMC | Sierra 2500 HD | WT |
| 2007-2010 | GMC | Sierra 3500 HD | SLE |
| 2007-2010 | GMC | Sierra 3500 HD | SLT |
| 2007-2010 | GMC | Sierra 3500 HD | WT |
$43.00
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-11262, 54-11262 & 75-11262
- This Kit Will Only Fit aFe Items w/Skus Ending w/-11262
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2008-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2008-2010 | Ford | F-250 Super Duty | King Ranch |
| 2008-2010 | Ford | F-250 Super Duty | Lariat |
| 2008-2010 | Ford | F-250 Super Duty | XL |
| 2008-2010 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2008-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2008-2010 | Ford | F-350 Super Duty | King Ranch |
| 2008-2010 | Ford | F-350 Super Duty | Lariat |
| 2008-2010 | Ford | F-350 Super Duty | XL |
| 2008-2010 | Ford | F-350 Super Duty | XLT |
$30.00
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-80882, 51-80882-E, 54-80882 & 75-10882
- This Kit Will Only Fit aFe Items w/Skus Ending w/-10882
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Chevrolet | Silverado 2500 HD | LS |
| 2006 | Chevrolet | Silverado 2500 HD | LT |
| 2006 | Chevrolet | Silverado 2500 HD | WT |
| 2007 | Chevrolet | Silverado 2500 HD Classic | LS |
| 2007 | Chevrolet | Silverado 2500 HD Classic | LT |
| 2007 | Chevrolet | Silverado 2500 HD Classic | WT |
| 2006 | Chevrolet | Silverado 3500 | LS |
| 2006 | Chevrolet | Silverado 3500 | LT |
| 2006 | Chevrolet | Silverado 3500 | WT |
| 2007 | Chevrolet | Silverado 3500 Classic | LS |
| 2007 | Chevrolet | Silverado 3500 Classic | LT |
| 2007 | Chevrolet | Silverado 3500 Classic | WT |
| 2006 | GMC | Sierra 2500 HD | SL |
| 2006 | GMC | Sierra 2500 HD | SLE |
| 2006 | GMC | Sierra 2500 HD | SLT |
| 2006 | GMC | Sierra 2500 HD | WT |
| 2007 | GMC | Sierra 2500 HD Classic | SL |
| 2007 | GMC | Sierra 2500 HD Classic | SLE |
| 2007 | GMC | Sierra 2500 HD Classic | SLT |
| 2007 | GMC | Sierra 2500 HD Classic | WT |
| 2006 | GMC | Sierra 3500 | SL |
| 2006 | GMC | Sierra 3500 | SLE |
| 2006 | GMC | Sierra 3500 | SLT |
| 2006 | GMC | Sierra 3500 | WT |
| 2007 | GMC | Sierra 3500 Classic | SL |
| 2007 | GMC | Sierra 3500 Classic | SLE |
| 2007 | GMC | Sierra 3500 Classic | SLT |
| 2007 | GMC | Sierra 3500 Classic | WT |
$43.00
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-10612, 54-10612 & 75-10612
- This Kit Will Only Fit aFe Items w/Skus Ending w/-10612
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2005 | Chevrolet | Silverado 2500 HD | Base |
| 2004-2005 | Chevrolet | Silverado 2500 HD | LS |
| 2004-2005 | Chevrolet | Silverado 2500 HD | LT |
| 2004-2005 | Chevrolet | Silverado 2500 HD | WT |
| 2004-2005 | Chevrolet | Silverado 3500 | Base |
| 2004-2005 | Chevrolet | Silverado 3500 | LS |
| 2004-2005 | Chevrolet | Silverado 3500 | LT |
| 2004 | Chevrolet | Silverado 3500 | WT |
| 2004-2005 | GMC | Sierra 2500 HD | Base |
| 2004-2005 | GMC | Sierra 2500 HD | SLE |
| 2004-2005 | GMC | Sierra 2500 HD | SLT |
| 2004-2005 | GMC | Sierra 2500 HD | WT |
| 2004-2005 | GMC | Sierra 3500 | Base |
| 2004-2005 | GMC | Sierra 3500 | SLE |
| 2004-2005 | GMC | Sierra 3500 | SLT |
| 2004-2005 | GMC | Sierra 3500 | WT |
$38.00
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-10192, 54-10192 & 75-10192
- This Kit Will Only Fit aFe Items w/Skus Ending w/-10192
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003 | Ford | Excursion | Eddie Bauer |
| 2000-2003 | Ford | Excursion | Limited |
| 2000-2003 | Ford | Excursion | XLT |
| 1999-2003 | Ford | F-250 Super Duty | Lariat |
| 1999-2003 | Ford | F-250 Super Duty | XL |
| 1999-2003 | Ford | F-250 Super Duty | XLT |
| 2003 | Ford | F-350 Super Duty | King Ranch |
| 1999-2003 | Ford | F-350 Super Duty | Lariat |
| 1999-2003 | Ford | F-350 Super Duty | XL |
| 1999-2003 | Ford | F-350 Super Duty | XLT |
$18.00
This trim seal’s PVC construction is flexible and durable, withstanding temperatures from -40°F to 212°F (-40°C to 100°C). It features a 7/16” EPDM bulb, allowing for a seal between the intake and vehicle. Integrated aluminum retaining clips provide excellent grip retention. Its co-extruded design helps prevent the common separation between the bulb and edge trim. On some cold air intake applications, the 7/16” EPDM bulb allows for a complete seal against the vehicle’s hood, fender well, or air inlet – making for reduced vibration, as well as protection from dust, moisture, and other elements. It’s designed to attach perfectly to 1/16” thick edges and will fit edges ranging from 1/32” to 1/8” thick. This trim seal fits a large number of aFe POWER’s cold air intake systems, but can be used for a variety of other applications as well. It’s most commonly used to replace existing worn-out trim seal. For aFe POWER parts, refer to your cold air intake’s instruction sheet to confirm the required trim seal size.
- Allows for Protection Against Vibration, Under Hood Heat, and Other Elements
- Co-Extruded Design Helps Prevent Separation Between the Bulb and Edge Trim
- Withstands Temperatures From -40°F to 212°F (-40°C to 100°C)
$18.00
This trim seal’s PVC construction is flexible and durable, withstanding temperatures from -40°F to 212°F (-40°C to 100°C). It features a 3/4” EPDM bulb, allowing for a seal between the intake and vehicle. Integrated aluminum retaining clips provide excellent grip retention. Its co-extruded design helps prevent the common separation between the bulb and edge trim. On some cold air intake applications, the 3/4” EPDM bulb allows for a complete seal against the vehicle’s hood, fender well, or air inlet – making for reduced vibration, as well as protection from dust, moisture, and other elements. It is designed to attach perfectly to 3/32” thick edges and will fit edges ranging from 1/32” to 1/8” thick. This trim seal fits a variety of aFe POWER’s Momentum and Magnum FORCE cold air intake systems, but can be used for a variety of other uses as well. It’s most commonly used to replace existing worn-out trim seal. For aFe POWER parts, refer to your cold air intake’s instruction sheet to confirm the required trim seal size.
- Allows for Protection Against Vibration, Under Hood Heat, and Other Elements
- Co-Extruded Design Helps Prevent Separation Between the Bulb and Edge Trim
- Withstands Temperatures From -40°F to 212°F (-40°C to 100°C)
$16.00
This plug is a popular replacement for aFes Duramax inlet tube. This plug allows you to remove the bulky resonator from the factory intake. Dont use PCV pipe or try to rig something when you can use this clean and easy plug.
- Resonator Plug For XX-10782/80782
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2004 | Chevrolet | Silverado 2500 HD | Base |
| 2001-2004 | Chevrolet | Silverado 2500 HD | LS |
| 2001-2004 | Chevrolet | Silverado 2500 HD | LT |
| 2004 | Chevrolet | Silverado 2500 HD | WT |
| 2001-2004 | Chevrolet | Silverado 3500 | Base |
| 2001-2004 | Chevrolet | Silverado 3500 | LS |
| 2001-2004 | Chevrolet | Silverado 3500 | LT |
| 2004 | Chevrolet | Silverado 3500 | WT |
| 2002-2004 | GMC | Sierra 2500 HD | Base |
| 2001-2002 | GMC | Sierra 2500 HD | SL |
| 2001-2004 | GMC | Sierra 2500 HD | SLE |
| 2001-2004 | GMC | Sierra 2500 HD | SLT |
| 2003-2004 | GMC | Sierra 2500 HD | WT |
| 2002-2004 | GMC | Sierra 3500 | Base |
| 2001-2002 | GMC | Sierra 3500 | SL |
| 2001-2004 | GMC | Sierra 3500 | SLE |
| 2001-2004 | GMC | Sierra 3500 | SLT |
| 2004 | GMC | Sierra 3500 | WT |
$43.00
This MAF adaptor allows for the use of the high performance Euro MAF sensor on US domestic market (USDM) E36 M3. Made of 100% polyurethane, this adaptor has a stainless steel sleeve in the adaptor neck for added rigidity. This coupler inlet diameter is 88.9mm that matches the Euro MAF and reduces down to 71.1mm to match domestic throttle bodies.
- Stainless Steel Sleeve In Adapter Neck
- (3-1/2 IN x 2.80 IN) ID x 2 IN L
- 100% Polyurethane
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1995-1999 | BMW | M3 | Base |
| 1995 | BMW | M3 | Lightweight |
$26.00
aFe POWER Magnum FORCE OE MAF sensor harness. This product is designed to directly replace the harness on the Ford Super Duty and F-150 Diesel models to extend the reach of the harness accommodating the relocated MAF sensor position on aFe POWER intake systems.
- High Quality Looming and Wire Harness w/Factory Style Connectors
- Compatible w/Other aFe POWER Performance Products
- Quick and Easy Plug & Play Installation
- High Reliability; 100% Of Units Tested
- No Modifications
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2020 | Ford | F-150 | King Ranch |
| 2018-2020 | Ford | F-150 | Lariat |
| 2018-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | XL |
| 2018-2020 | Ford | F-150 | XLT |
| 2011-2019 | Ford | F-250 Super Duty | King Ranch |
| 2011-2019 | Ford | F-250 Super Duty | Lariat |
| 2018-2019 | Ford | F-250 Super Duty | Limited |
| 2013-2019 | Ford | F-250 Super Duty | Platinum |
| 2011-2019 | Ford | F-250 Super Duty | XL |
| 2011-2019 | Ford | F-250 Super Duty | XLT |
| 2011-2019 | Ford | F-350 Super Duty | King Ranch |
| 2011-2019 | Ford | F-350 Super Duty | Lariat |
| 2018-2019 | Ford | F-350 Super Duty | Limited |
| 2013-2019 | Ford | F-350 Super Duty | Platinum |
| 2011-2019 | Ford | F-350 Super Duty | XL |
| 2011-2019 | Ford | F-350 Super Duty | XLT |
$11.00
Direct replacement for 05-01454 fitting and 03-50167 grommet widely used on aFe POWER Air Intake systems to secure Factory Air Temperature sensor.
- Air temperature sensor fitting
- Includes rubber grommet
- Nylon 66 Material
- Black Finish
$26.00
This vent tube easily inserts into the vent fitting on the factory tube to assure the ideal amount of vacuum is pulled after the installation of an aFe POWER air intake system. Refer to the air intake systems installation manual for correct installation. This vent tube is made out of nylon for durability and easy installation. This product is designed to directly replace the vent insert on aFe POWER cold air intake systems for the Ford F-150 with the 3.5L V6 Ecoboost.
- This vent tube insert prevents the P04DB check engine light after installing an air intake system.
- Designed to directly replace those used on specific Ford F-150 3.5L Ecoboost intakes.
- Direct Replacement Lost or Broken Vent Inserts
- Injection Molded Nylon Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2025 | Ford | F-150 | King Ranch |
| 2016-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2016-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2016-2025 | Ford | F-150 | XL |
| 2016-2025 | Ford | F-150 | XLT |
$16.00
Durable Clear Polycarbonate Construction:With its durable injection molded polycarbonate construction, this filter sight window is resistant to cracking and impact. Its transparent finish allows for hassle-free filter inspection, without having to disassemble the cold air intake system.
- Durable Injection Molded Clear Polycarbonate Construction
- Easily Secured to Housing with Six Included Push Nuts
- Fits a Wide Range of aFe POWER Momentum Intakes
$11.00
This is a universal 1” silicone cap kit. Don’t try to rig something when you can use this clean and easy cap.
- Included worm clamp
- 1” Universal Cap
$16.00
Ideal for air intake system applications, our heavy duty T-Bolt clamps provide secure connections for hose-to-tube interfaces with diameters ranging from 5-5/16” to 5-5/8”.
- Corrosion-resistant stainless-steel construction provides long-lasting durability
- Can be tightened with 7/16” socket
$26.00
The high temperature 2-PLY reinforced silicone 40 degree reducer coupler is designed to connect to a (4" x 3-1/2") OD tube and is 3" long. The coupling is 3" long with a 40 degree bend. Standard stainless steel worm-gear #056 and #064 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.
- Coupler Allows For Expansion/Movement/Vibration
- Reinforced High Temp Silicone
- Corrosion Resistant
$26.00
The high temperature 2-PLY reinforced silicone hump coupler is designed to connect to a 3-1/2" ID tube and is 3" long. Standard stainless steel worm-gear #056 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.
- Coupler Allows For Expansion/Movement/Vibration
- Reinforced High Temp Silicone
- Corrosion Resistant
$38.00
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUV's. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
- Coupler Hose Allows For Expansion/Movement/Vibration
- Clamps Provide Tight Connections and Durability
- Standard Stainless Steel Worm Gear Clamps
- 1-Ply Reinforced High Temp Silicone
- Meets Or Exceeds SAEJ20 Standard
- Clamps Are Corrosion Resistant
$23.00
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
- Coupler Hose Allows For Expansion/Movement/Vibration
- Clamps Provide Tight Connections and Durability
- Reaction Injection Molded (RIM) Polyurethane
- Standard Stainless Steel Worm Gear Clamps
- 100% Polyurethane For Extra Long Life
- Clamps Are Corrosion Resistant
- Made w/100% 60 Shore A
$23.00
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
- Coupler Hose Allows For Expansion/Movement/Vibration
- Clamps Provide Tight Connections and Durability
- Reaction Injection Molded (RIM) Polyurethane
- Standard Stainless Steel Worm Gear Clamps
- 100% Polyurethane For Extra Long Life
- Clamps Are Corrosion Resistant
- Made w/100% 60 Shore A
$23.00
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
- Coupler Hose Allows For Expansion/Movement/Vibration
- Clamps Provide Tight Connections and Durability
- Reaction Injection Molded (RIM) Polyurethane
- 100% Polyurethane For Extra Long Life
- Clamps Are Corrosion Resistant
- Made w/100% 60 Shore A
$23.00
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the mark et. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
- Coupler Hose Allows For Expansion/Movement/Vibration
- Clamps Provide Tight Connections and Durability
- Reaction Injection Molded (RIM) Polyurethane
- Standard Stainless Steel Worm Gear Clamps
- 100% Polyurethane For Extra Long Life
- Clamps Are Corrosion Resistant
- Made w/100% 60 Shore A
$1,606.00
Dual 4” Flange 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals. Lightweight twill weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass). The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. This unique carbon fiber cover is also lightweight high gloss clear-coated twill weave carbon fiber and closes off the housing from unwanted hot engine air. It features a Black Series emblem for authenticity and is secured to the housing using aFe POWER laser etched washers and bolts. This cover will greatly enhance your engine bay appearance. Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.
Installation Instructions- Heat resistant housing that enclosed the dual air filter set up
- Custom aFe POWER laser etched stainless steel washers and bolts
- Dual 360-degree radial flow dry (oil-Free) air filters
- Dyno-tuned lightweight 100% carbon fiber tube
- Carbon Fiber cover for an aggressive look
- Premium silicone couplings and hardware
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2026 | Chevrolet | Corvette | Stingray |
$338.00
Dynamic Air Scoops lower air intake temperatures by forcing more cool air from the front grilles into the factory intake tract. These scoops are constructed from 100% twill weave carbon fiber (no fiberglass) for lightweight, heat protection, and good looks. They feature a gloss finish on the exterior and a matte finish inside. They are precisely designed and manufactured to snap directly into the factory inlet ducts and mount onto the vehicle's V-support brace. No additional hardware is required for a hassle-free installation.
Installation Instructions- Set of Two (Driver and Passenger Side), Visible Behind Grilles for an Aggressive Loo
- Snaps Into Factory Inlet Ducts and Mounts Onto V-Support Brace w/ No Extra Hardware
- Lightweight, 100% Twill Weave Carbon Fiber Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2023 | BMW | M5 | Base |
| 2019-2021 | BMW | M5 | Competition |
| 2022 | BMW | M5 | CS |
| 2020 | BMW | M5 | Edition 35 Years |
$1,329.00
This 8-1/2” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The simple yet elegant one-piece sealed housing features our patent-pending filter-to-housing interface, making installation a snap. The housing is made out of lightweight, high gloss, clear-coated twill weave carbon fiber. A lightweight high gloss twill weave carbon fiber tube directs filtered air from the air filter to the engine. It's computer-designed and tested to increase air flow, while also reducing weight and enhancing the visual appearance of the engine bay. Premium stainless-steel T-bolt clamps and a reinforced silicone coupling are used for strength and durability. Designed with fewer parts, this system's installation is extremely simple and secure.
Installation Instructions- Utilizes Factory Mounting Locations and Both OE Air Inlets for Maximum Air Flow
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Race-Inspired Lightweight 100% Carbon Fiber Construction
- Weighs in 40% Lighter than OE Intake System
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Dodge | Durango | SRT |
| 2022-2024 | Dodge | Durango | SRT 392 |
| 2014-2021 | Jeep | Grand Cherokee | SRT |
| 2012-2013 | Jeep | Grand Cherokee | SRT8 |
Showing 360/1976
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.