The Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This aFe POWER Pro DRY S is a 9" tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The textured one-piece sealed housing, constructed of red cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An optional auxiliary air inlet pulls in additional cool air from the inner fender when under power. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-Bolt clamps and an injection molded coupling are included for strength and durability, while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts and utilize factory mounting points for a fast and easy installation.

• Get more power across your everyday RPM range with this Momentum GT Cold Air Intake System. Its massive intake tube and filter ensure it not only will perform - but also will draw attention to your new RAM 1500's engine bay.
• Premium T-Bolt Clamps and Injection Molded Couplings Provide a Secure Seal
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Life-Long Convenience
• Massive Heat-Resistant Intake Tube with Sealed One-Piece Housing
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

Lower Intake Air Temperatures: This Dynamic Air Scoop takes advantage of the Challengers factory Air Catcher IN headlight inlet by guiding cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance.Durable XLPE Construction: This D.A.S. is constructed from high-quality cross-linked polyethylene (XLPE) that is heat soak resistant and extremely durable.Hassle-Free Installation: Inspired by the Challenger SRT Hellcat, this Dynamic Air Scoop works with both factory (requires Hellcat factory airbox) and aFe POWER Momentum GT intake systems. This part easily snaps into the air box and requires no modification to your vehicle.Note: aFe POWER Momentum GT intakes (P/N: 51/54-72201, 51/54-72202 and 51/54-72203).Fitment Note: This product will only fit models equipped with R/T SCAT PACK or Rhombi Illuminated Air Catcher headlamp.

• Directs Forward Pressurized Air Into Intake System
• CAD-Designed Roto-Molded Dynamic Air Scoop
• No Cutting Or Drilling Required
• Direct Snap-In Installation
• Maximum Performance

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features a 5-3/4” flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by only uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates factory air scoop inlets, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps and a silicone coupling are used for strength and durability. Momentum HD intakes are designed with fewer parts for a fast and easy installation.

• Washable and Reusable Pro 10R Air Filter for Maximum Dust Holding Capacity and Longevity
• Sealed Housing Incorporates Factory Air Scoops Inlets and Auxiliary Air Inlet
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Innovative Filter-to-Housing Interface for Easy Installation
• Premium Clamps and a Silicone Coupling Provide a Secure Seal

This Part Fits:

The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. The Momentum ST intake is designed around an oil-free, large 9" Tall conical flat top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel worm gear clamps and a silicone coupler are used for strength and durability while also providing the most secure installation available. Momentum ST intakes are designed with fewer parts for a quick and simple installation.

• No Cutting Or Drilling On Factory Parts For Faster Install
• Unique Filter-To-Housing Interface For Easy Installation
• Pro DRY S Oil-Free Washable/Reusable Filter
• CAD-Designed Roto-Molded Intake Tube

This Part Fits:

The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. The Momentum ST intake is designed around an oil-free, large 9" Tall conical flat top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel worm gear clamps and a silicone coupler are used for strength and durability while also providing the most secure installation available. Momentum ST intakes are designed with fewer parts for a quick and simple installation.

• No Cutting Or Drilling On Factory Parts For Faster Install
• Unique Filter-To-Housing Interface For Easy Installation
• Pro DRY S Oil-Free Washable/Reusable Filter
• CAD-Designed Roto-Molded Intake Tube

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features two 3” inlets and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals. This media is perfect for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. Dual mandrel-bent blue powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the turbos for more horsepower and torque. A hose connects both tubes to balance air intake pressure. A silicone seal piece finishes the inlet of the housing and seals to the hood to block off unwanted hot engine air from entering the air intake system. Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible and premium silicone couplings allows for ample flexibility and guarantee perfect seals. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• 3" Mandrel-Bent, Blue Powder-Coated Aluminum Intake Tubes for Maximum Airflow and Velocity
• Premium Clamps and Silicone Couplings Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Sealed Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features two 3” inlets and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals. This media is perfect for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. Dual mandrel-bent wrinkle-black powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the turbos for more horsepower and torque. A hose connects both tubes to balance air intake pressure. A silicone seal piece finishes the inlet of the housing and seals to the hood to block off unwanted hot engine air from entering the air intake system. Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible and premium silicone couplings allows for ample flexibility and guarantee perfect seals. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• 3" Mandrel-Bent, Powder-Coated Wrinkle-Black Aluminum Intake Tubes for Maximum Airflow and Velocity
• Premium Clamps and Silicone Couplings Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Sealed Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features two 3” inlets and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street and light off-road use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. Dual mandrel-bent blue powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the turbos for more horsepower and torque. A hose connects both tubes to balance air intake pressure. A silicone seal piece finishes the inlet of the housing and seals to the hood to block off unwanted hot engine air from entering the air intake system. Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible and premium silicone couplings allows for ample flexibility and guarantee perfect seals. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• 3" Mandrel-Bent, Blue Powder-Coated Aluminum Intake Tubes for Maximum Airflow and Velocity
• Premium Clamps and Silicone Couplings Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Sealed Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features two 3” inlets and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street and light off-road use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. Dual mandrel-bent wrinkle-black powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the turbos for more horsepower and torque. A hose connects both tubes to balance air intake pressure. A silicone seal piece finishes the inlet of the housing and seals to the hood to block off unwanted hot engine air from entering the air intake system. Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible and premium silicone couplings allows for ample flexibility and guarantee perfect seals. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• 3" Mandrel-Bent, Powder-Coated Wrinkle-Black Aluminum Intake Tubes for Maximum Airflow and Velocity
• Premium Clamps and Silicone Couplings Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Sealed Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

Unique One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation. Large 5-Layer Performance Air Filter:This Momentum XP intake system was designed around the largest filter possible to allow maximum performance and filtration. Its unique filter-to-housing interface (US PAT 9440175) not only makes for a simple installation, but also allows for a large inverted 3.8”x 9" air filter. The filter’s Pro 5R media features five progressively finer porosity cotton gauze layers that provide maximum airflow and performance. Mandrel-Bent Tubing:A one piece 3.5" mandrel-bent brushed aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Premium Hardware:Premium stainless-steel t-bolt clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• Enjoy a custom look under the hood without compromising performance and quality with this Momentum XP Cold Air Intake System. It features a unique one-piece sealed housing and a brushed aluminum intake tube.
• Built-in sight window provides easy filter inspection without disassembly
• Unique filter-to-housing interface for easy installation (US PAT 9440175)
• Enjoy lifelong performance with a washable and reusable Pro 5R air filter

This Part Fits:

Unique One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Large 5-Layer Performance Air Filter:This Momentum XP intake system was designed around the largest filter possible to allow maximum performance and filtration. Its unique filter-to-housing interface (US PAT 9440175) not only makes for a simple installation, but also allows for a large inverted 3.8”x 9" air filter. The filter’s Pro 5R media features five progressively finer porosity cotton gauze layers that provide maximum airflow and performance. Mandrel-Bent Tubing:A one piece 3.5" mandrel-bent wrinkle-black powder-coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Premium Hardware:Premium stainless-steel t-bolt clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• Enjoy a custom look under the hood without compromising performance and quality with this Momentum XP Cold Air Intake System. It features a unique one-piece sealed housing and a stealthy powder-coated black aluminum intake tube.
• Built-in sight window provides easy filter inspection without disassembly
• Unique filter-to-housing interface for easy installation (US PAT 9440175)
• Enjoy lifelong performance with a washable and reusable Pro 5R air filter

This Part Fits:

One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Dual Inlet Large 5-Layer Performance Air Filter:This sealed intake system utilizes a radial flow performance air filter with five pre-oiled progressive cotton gauze media layers for maximum performance. The unique filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.Dual 3" Mandrel-Bent Tubes w/ Custom Silicone Coupling:Dual mandrel-bent powder-coated blue aluminum intake tubes direct unrestricted airflow from the filter to the throttle body for more horsepower and torque. A custom reinforced silicone coupling merges the dual tubes into a single outlet to connect to the throttle body.Premium Hardware:Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• Get a custom look under the hood with this Momentum XP Cold Air Intake System. With striking blue powder-coated aluminum intake tubes and a custom dual inlet air filter, this thing is sure to turn heads.
• One-piece roto-molded housing captures air directly from the front of the truck
• Enjoy lifelong performance with a washable and reusable Pro 5R air filter
• Clear sight window provides easy filter inspection without disassembly
• Unique filter-to-housing interface for an easy installation

This Part Fits:

One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. Its roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Dual Inlet Large 5-Layer Performance Air Filter:This sealed intake system utilizes a radial flow performance air filter with five pre-oiled progressive cotton gauze media layers for maximum performance. The unique filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.Dual 3" Mandrel-Bent Tubes w/ Custom Silicone Coupling:Dual mandrel-bent wrinkle-black powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the throttle body for more horsepower and torque. A custom reinforced silicone coupling merges the dual tubes into a single outlet to connect to the throttle body.Premium Hardware:Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• Get a custom look under the hood with this Momentum XP Cold Air Intake System. With stealthy dual wrinkle-black aluminum intake tubes and a custom dual inlet air filter, this thing is sure to turn heads.
• One-Piece Roto-Molded Housing Captures Air Directly from the Front of the Truck
• Enjoy Lifelong Performance with a Washable and Reusable Pro 5R Air Filter
• Clear Sight Window Provides Easy Filter Inspection Without Disassembly
• Unique Filter-to-Housing Interface for an Easy Installation

This Part Fits:

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Comes w/A Mirror Polished Finish
• Unique Laser-Cut aFe Power Logo
• Constructed Of Stainless Steel
• Fits 5 in. Exhaust Systems

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Unique Laser-Cut aFe Power Logo
• Constructed Of Stainless Steel
• Slotted For Secure Mounting
• Fits 5 in. Exhaust Systems
• High Quality Band Clamp
• Comes w/A Black Finish

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Drain Port On Bottom Of Tip Keeps Rust and Corrosion Away
• Comes w/Unique Laser-Etched aFe Power Logo
• Universal Tip Fits 5 in. Exhaust Systems
• Slotted For Secure Mounting
• High Quality Band Clamp
• Stainless Steel

aFe Power is proud to introduce the all new diesel exhaust tip. This tip comes with a matte-black finish and is designed to fit 5" exhaust systems. With a 5" inlet x 6" outlet and 15" inch length, this single-walled, slash cut rolled tip comes with a unique laser-cut aFe Power logo plate riveted on for an aggressive style. Leak-Free Seal: A high quality stainless steel band clamp is used for a complete 360 degree sealing surface. aFe Badging: Comes with a unique laser-cut aFe Power logo plate riveted on for an aggressive style. Drain Port: A drain port on the bottom of the tip keeps rust and corrosion away.

• Comes w/Unique Laser-Cut aFe Power Logo
• Constructed Of Stainless Steel
• Slotted For Secure Mounting
• High Quality Band Clamp

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Unique Laser-Cut aFe Power Logo Plate
• Constructed Of Stainless Steel
• Slotted For Secure Mounting
• Fits 5 in. Exhaust Systems
• High Quality Band Clamp

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Drain Port On Bottom Of Tip Keeps Rust and Corrosion Away
• Comes w/Unique Laser-Etched aFe Power Logo
• Universal Tip Fits 4 in. Exhaust Systems
• Slotted For Secure Mounting
• High Quality Band Clamps
• Stainless Steel

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stain less steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Laser-Cut aFe Power Logo Plate Riveted On For An Aggressive Style
• High Quality Band Clamp To Securely Attach The Tip
• Constructed Of 409 Stainless Steel
• Slotted For Secure Mounting
• Fits 4 in. Exhaust Systems

aFe Power is proud to introduce an all new intercooled exhaust tip. This tip comes with a high luster polished finish and is designed to fit 4" exhaust systems. With a 4" inlet x 5" outlet and 12" inch length, this single-walled, angle cut rolled tip comes with intercooling vents and a unique laser-cut aFe Power logo plate riveted on for an aggressive style.

• Unique Laser-etched aFe Power Logo
• Slotted For Secure Mounting
• Fits 4 in. Exhaust Systems
• High Quality Band Clamp

aFe Power is proud to introduce an all new intercooled exhaust tip. This tip comes with a black finish and is designed to fit 4" exhaust systems. With a 4" inlet x 5" outlet and 12" inch length, this single-walled, angle cut rolled tip comes with intercooling vents and a unique laser-cut aFe Power logo plate riveted on for an aggressive style. Intercooled Vents: This tip comes with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. Leak-Free Seal: A high quality stainless steel band clamp is used for a complete 360 degree sealing surface. aFe Badging: The exhaust tip comes with a unique laser-cut aFe Power logo plate riveted on for an aggressive style

• Unique Laser-etched aFe Power Logo
• Slotted For Secure Mounting
• Fits 4 in. Exhaust Systems
• High Quality Band Clamp

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

• Unique Laser-etched aFe Power Logo
• Black Finish Stainless Steel
• Slotted For Secure Mounting
• Fits 4 in. Exhaust Systems
• High Quality Band Clamp
• Universal Slash-Cut

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hass le-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility.

• Drain Port On Bottom Of Tip Keeps Rust and Corrosion Away
• Universal Tip Fits 4 in. Exhaust Systems
• Unique Laser-etched aFe Power Logo
• Slotted For Secure Mounting
• High Quality Band Clamp
• Stainless Steel

This direct-fit clamp-on tip is constructed from 304 stainless steel and features a black finish for corrosion resistance for long lasting good looks. This tip features a Takeda logo for an aggressive, custom look. A high quality stainless steel clamp is used for a complete 360 degree sealing surface.

• Includes High Quality Stainless Steel Clamp
• Constructed of 304 Stainless Steel
• Fits 2-1/2 IN Exhaust Systems
• Black Finish with Takeda Logo
• Slotted for Secure Mounting

Upgrade and bring out the maximum potential of your exhaust systems with the MACH Force-Xp 304 stainless steel resonator delete pipe. This pipe is constructed out of 304 stainless steel and comes complete with high quality band clamps for a easy installation and a 360 degree sealing surface. Specifically designed for 3" exhaust systems, this pipe is 16" long and build for durability and rust resistance. This system will result in low turbulence, maximum flow, increased horsepower, and increased torque. This resonator delete pipe is constructed using 304 stainless steel for maximum strength and durability. A high quality stainless steel band clamp is used for a complete 360 degree sealing surface. 3 IN ID x 12 IN Body x 16 IN Overall Length

• Constructed from 304 Stainless Steel for Durability and Rust Resistance
• Cutting May be Required When Used With Other Brands
• Stainless Steel Clamp Included for Secure Mounting
• Will Replace Most 12" Long Resonators
• Fits Most 3" Exhaust Systems

Reduce unwanted interior resonance or drone with this polished 304 stainless steel resonator. This resonator is constructed out of 304 stainless steel and comes complete with high quality band clamps for an easy installation. Specifically designed for 2-1/2" exhaust systems, this resonator has a 4" Dia. x 15" Body, 19" overall length, and build for durability and rust resistance. This system will result in low turbulence, maximum flow, increased horsepower, and increased torque.

• Stainless Steel Clamps Included For Secure Mounting
• Cutting May Be Required When Used With Other Brands
• Constructed Out Of Polished 304 Stainless Steel
• Fits Most 2.5 in. Exhaust Systems
• Durable and Rust Resistant

Reduce unwanted interior resonance or drone with this polished 304 stainless steel resonator. This resonator is constructed out of 304 stainless steel and comes complete with high quality band clamps for an easy installation. Specifically designed for 3" exhaust systems, this resonator has a 4" Dia. x 12" Body, 16" overall length, and build for durability and rust resistance. This system will result in low turbulence, maximum flow, increased horsepower, and increased torque. This exhaust resonator is constructed using polished 304 stainless steel for maximum strength and durability.

• Built For Durability And Rust Resistance
• Reduce Unwanted Interior Resonance
• Hassle Free Installation
• Maximum Flow

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of 409 stainless steel and is used to eliminate the 4" In/Out muffler used in most factory or performance 4" exhaust systems. You will love the aggressive exhaust note of a 4" system with no muffler while maximizing exhaust flow, throttle response and performance.Muffler-Delete Pipe Specifications: 4 IN ID x 24 IN L x 30 IN Overall LengthLeak-Free Seal: Includes 2 Torca AccuSeal exhaust clamps for a long-lasting, secure 360-degree sealing surface.Emissions Disclaimer: This product does not require a CARB EO#

• Includes 2 Torca AccuSeal exhaust clamps for a long-lasting, secure 360-degree sealing surface.
• 409 stainless steel construction

Replace and upgrade your restrictive factory muffler with this Takeda 304 stainless steel muffler delete pipe. Designed to provide maximum flow and low turbulence for increased horsepower, torque and throttle response. This Takeda muffler delete pipe measure 2 ½" x 14" L x 20" Overall Length. Built for durability and rust resistance, it includes quality stainless steel band clamps for easy installation and 360-degree sealing surface.

• Built For Durability And Rust Resistance
• 360 Degree Sealing Surface
• Easy Installation
• Low Turbulence
• Maximum Flow