This Part Fits:

The all-new 6th Generation Ford Bronco is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Bronco has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your Bronco!

• Note: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#
• Oversized tubing reduces restriction providing increased airflow and performance
• Fast and simple bolt-on that provides increased approach and departure angles
• Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
• Straight through, single exit design developed for maximum exhaust flow
• Includes high quality band clamps for a simple, leak-free installation
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Injen's Muffler Delete Kit replaces the restrictive factory muffler.
• Uses all factory mounting locations with factory-style hangers
• Fits both 2-door and 4-door models without modifications
• Dyno Proven gains of up to 8 hp and 10 lb-ft. of torque
• Increase Throttle Response and Decreases Turbo Lag
• High-tuck design for increased ground clearance
• Designed and manufactured in Pomona, CA
• EMISSIONS

This Part Fits:

The Jeep Wrangler is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Wrangler has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your JK!, , SES5003MD is our newest muffler delete kit for the 2007-2018 Jeep Wrangler JK (3.6L & 3.8L) and is a fantastic solution for those that want to climb those steeper obstacles without breaking the bank on a high tuck exhaust. In fact, you can easily swap over to this muffler delete for the weekend wheeling trips and then reinstall your OE muffler for your weekly commute ? all within 20 minutes. This isn't our cheap delete kit made from thin cold-rolled steel that will either rust or crack, the Injen Muffler Delete kit is made for 304 stainless steel that is mandrel bent right here in Pomona, CA for durable, long-lasting performance. During the design process, our engineers made sure that the install was a simple as possible and retained the use of the factory hanger locations. This allows for quick swaps without throwing any wrenches!, , As always, the SES5003MD muffler delete works seamlessly with our full line of Jeep performance products. From Rotomolded air intakes to throttle response controllers to complete performance exhaust systems, Injen Technology is here to help you take on the world in your Jeep!

• Injen's Muffler Delete Kit replaces the restrictive factory muffler and exhaust pipe.
• Simple Bolt-on Installation using factory mounting points with no cutting or welding
• Smooth pipe routing eliminates restrictions and greatly improves airflow
• Injen Intake also available ? EVO5002 (3.8L) and EVO5003 (3.6L)
• Aggressive engine tone, especially under full throttle
• Injen X-Pedal Throttle Response Controller ? PT0013
• Provides increased approach and departure angles
• Made From Mandrel Bent 60mm 304 Stainless Steel
• Injen Snorkel also available - EVO15070
• Made in Pomona California, USA
• No additional tuning required
• Uses Factory Hanger

This Part Fits:

This Part Fits:

Straight Pipe Monster Muffler Delete kit for 4 inch Banks Power Monster Exhaust Systems. Does not replace OEM muffler. Replaces Muffler 53801 used in 2001-2007 6.6L Duramax and 1998-2007 5.9L Cummins 4 Inch Monster Exhausts. Includes 4-inch x 36-inch Exhaust Straight Pipe and all necessary hardware. Banks Power Straight Pipe Kits are made from durable galvanized T-409 Stainless Steel. These kits come with the necessary hardware for the applications listed in their description. Straight Pipe Kit, Replaces Muffler P/N 53801. For use with 4 inch Monster-Exhaust systems for 2001-2007 Duramax and 1998-2007 Cummins 2500/3500 trucks.Key Features: Straight Pipe kit, stainless. Replaces Muffler 53801. Includes 4-inch x 36-inch Exhaust Straight Pipe. Includes all necessary hardware

• Includes all necessary hardware

This Part Fits:

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of 409 stainless steel and is used to eliminate the 4" In/Out muffler used in most factory or performance 4" exhaust systems. You will love the aggressive exhaust note of a 4" system with no muffler while maximizing exhaust flow, throttle response and performance.Muffler-Delete Pipe Specifications: 4 IN ID x 24 IN L x 30 IN Overall LengthLeak-Free Seal: Includes 2 Torca AccuSeal exhaust clamps for a long-lasting, secure 360-degree sealing surface.Emissions Disclaimer: This product does not require a CARB EO#

• Includes 2 Torca AccuSeal exhaust clamps for a long-lasting, secure 360-degree sealing surface.
• 409 stainless steel construction