aFe Control's ESD (electronic shock delete) is a simple plug and play module that eliminates the suspension control check engine light allowing instillation of aftermarket shocks or coilovers on vehicles previously equipped with GM "MagneRide"electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. This ESD kit is sold in sets of four, one for each shock, and features anodized extruded aluminum heat sinks, GM style Metri-Pack connectors, and abrasion resistant braided wiring shields. Gen 2 ESD kit, characterized by large Metri-Pack connector, fits the following vehicles: 97-04 C5 Corvette, 05-13 C6 Corvette, 09-13 Cadillac CTS-V.

• Eliminates Suspension Control Check Engine Light
• Abrasion Resistant Braided Wiring Shields
• Anodized Extruded Aluminum Heat Sinks
• GM Style Metri-Pack Connectors
• Simple Plug and Play

This Part Fits:

aFe CONTROL Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. These modules are sold as a set of four.

• Eliminates Suspension Control Check Engine Light
• Simple Plug and Play Installation
• GM-Style Metri-Pack Connectors

This Part Fits:

aFe Control is proud to release the PFADT Series, Featherlight Adjustable Coilover System for the 2014-2015 C7 Corvette. Designed as a complete solution the Featherlight Coilovers will allow you to remove the transverse leaf springs and OE shocks on your Corvette yielding a true independent suspension which eliminates the "crosstalk" and harsh ride that the OEM suspension is known for. Both ride height and damping are easily adjustable in this design allowing for fine tuning your Corvette's stance and ride quality. Packed with features, the coilovers are precision CNC machined from 6061-T6 Aluminum and hard anodized. The mono-tube construction utilizes a floating piston to separate the oil and nitrogen gas, allowing for predictable handling and a consistent feel, while the spring rates have been optimized for street and track use.

• Mono-Tube Construction Utilizes Internal Floating Piston
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• Damping Adjustable For Rebound And Compression
• Ball On Axis Upper Mount System
• Better Ride And Quiet Operation
• Ride Height Adjustable

This Part Fits:

aFe Control is proud to release the PFADT Series, Featherlight Adjustable Coilover System for the 2014-2015 C7 Corvette. Designed as a complete solution the Featherlight Coilovers will allow you to remove the transverse leaf springs and OE shocks on your Corvette yielding a true independent suspension which eliminates the "crosstalk" and harsh ride that the OEM suspension is known for. Both ride height and damping are easily adjustable in this design allowing for fine tuning your Corvette's stance and ride quality. Packed with features, the coilovers are precision CNC machined from 6061-T6 Aluminum and hard anodized. The mono-tube construction utilizes a floating piston to separate the oil and nitrogen gas, allowing for predictable handling and a consistent feel, while the spring rates have been optimized for street and track use.

• Mono-Tube Construction Utilizes Internal Floating Piston
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• Damping Adjustable For Rebound And Compression
• Ball On Axis Upper Mount System
• Better Ride And Quiet Operation
• Ride Height Adjustable

This Part Fits:

aFe Control is proud to introduce the Johnny OConnell signature series shock package for the 2014-2015 Chevrolet Corvette C7. These Shocks are tuned by Johnny OConnell himself and made to the exact travel and durability requirements as the OEM shocks. These are the only OEM quality replacements on the market. Perfectly matched to the Johnny OConnell sway bars, these shocks will make for a complete transformation in your C7 Corvettes performance ride.

• High Strength While Still Maintaining Lightweight Design
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• Mono-Tube Construction w/Internal Floating Piston
• Damping Adjustable For Rebound And Compression
• Ball On Axis Upper Mount System
• Ride Height Adjustable

This Part Fits:

aFe Control is proud to introduce the Johnny OConnell signature series shock package for the 2014-2015 Chevrolet Corvette C7. These Shocks are tuned by Johnny OConnell himself and made to the exact travel and durability requirements as the OEM shocks. These are the only OEM quality replacements on the market. Perfectly matched to the Johnny OConnell sway bars, these shocks will make for a complete transformation in your C7 Corvettes performance ride.

• High Strength While Still Maintaining Lightweight Design
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• Mono-Tube Construction w/Internal Floating Piston
• Damping Adjustable For Rebound And Compression
• Ball On Axis Upper Mount System
• Ride Height Adjustable

This Part Fits:

aFe CONTROL Leveling Kits are made of 6061 billet aluminum and provide a 1.5-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 1.5-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring. Minor trimming of the upper studs on the factory struts is required for this install. A vehicle alignment is required after installing this product.

• Minor Trimming of Factory Strut Studs Required
• CNC Machined 6061 Billet Aluminum
• Increases Front Ground Clearance
• High Strength Hardware
• 1.5-Inch Front Lift
• Red Anodized Finish

This Part Fits:

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.5-Inch lift in the front and a 1-Inch lift in the rear to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. This kit includes two spacers for each strut, allowing for a range of lift heights. Both the shim and pre-load spring spacers together make for the maximum lift allowable without compromising the efficiency of the stock shock. Using one or the other will make for a low or moderate lift height. Installation of these leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers requires disassembly of the strut/spring. A spring compressor is required to install the pre-load spring spacer.

• Easy Bolt-On Installation, Requires no Modifications
• Does not Fit Vehicles Equipped with AVS Option
• 2.5-Inch Front and 1-Inch Rear Lift
• CNC Machined 6061 Billet Aluminum
• Increases Front Ground Clearance
• Red Anodized Finish

This Part Fits:

This aFe CONTROL Rear Leveling Kit is made from 304 stainless steel and provides a 1.625-Inch lift in the rear to provide better off-road performance. Self-Leveling Rear Air Suspension equipped Toyota Tundra models are lowered in the rear to match the front level. This kit is designed to replace the level sensor bracket on air suspension equipped models, prompting the truck to raise the rear to the same height as coil spring trucks. Combined with the aFe CONTROL Front Leveling Kit (PN: 416-72T005-R), your truck will remain level at a lifted height from stock. Installation of these leveling brackets can be done at home with the proper tools and safety precautions. Installing these brackets does not require any disassembly of the air suspension.

• Easy Bolt-On Installation, Requires no Modifications
• Increases Rear Ground Clearance
• Laser Cut 304 Stainless Steel
• 1.625-Inch Rear Lift

This Part Fits:

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 1.875-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 1.875-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring.

• Easy Bolt-On Installation, Requires no Modifications
• CNC Machined 6061 Billet Aluminum
• Increases Front Ground Clearance
• High Strength Hardware
• Red Anodized Finish

This Part Fits:

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.5-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 2.5-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring.

• Easy Bolt-In Installation, Requires no Modifications
• CNC Machined 6061 Billet Aluminum
• Increases Front Ground Clearance
• High Strength Hardware
• 2.5-Inch Front Lift
• Red Anodized Finish

This Part Fits:

aFe CONTROL Leveling Kits are made of 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 2.0-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring.

• Easy Bolt-In Installation, Requires no Modifications
• Fits All 2005-2021 Toyota Tacoma Models w/ 6 Lugs
• CNC Machined 6061 Billet Aluminum
• Increases Front Ground Clearance
• High Strength Hardware
• 2.0-Inch Front Lift
• Red Anodized Finish

This Part Fits:

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 1.25-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 1.25-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring.

• Easy Bolt-On Installation, Requires no Modifications
• CNC Machined 6061 Billet Aluminum
• Increases Front Ground Clearance
• High Strength Hardware
• 1.25-Inch Front Lift
• Red Anodized Finish

This Part Fits:

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 2.0-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring.

• Easy Bolt-on Installation, Requires no Modifications
• CNC Machined 6061 Billet Aluminum
• Increases Ground Clearance
• High Strength Hardware
• 2.0-Inch Front Lift
• Red Anodized Finish

This Part Fits:

aFe CONTROL Leveling Kits are made of billet aluminum and provide an adequate lift to the front of your vehicle to improve off-road performance while also eliminating the “nose-down rake” from the factory stance.High quality hardware is used for strength and durability. New connecting rods are included to reposition the front ride height sensors so all driving modes remain available. Polyurethane spring isolators allow the top plates of the OE shocks to be switched in order to prevent the springs from bowing. Installation of these leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does require disassembly of the strut/spring. A spring compressor is not required due to the light amount of preload on the stock coil springs and extended shaft studs.

• Increases Front Ground Clearance and Allows Larger Tire Size Without Rubbing
• CNC Machined 6061 Billet Aluminum with Red Anodized Finish
• Includes New Connecting Rods for the Ride Height Sensors
• Easy Bolt-On Installation, Requires no Modifications
• Polyurethane Spring Isolators Correct Spring Bowing
• High Strength Hardware
• 3.0-Inch Front Lift

This Part Fits:

aFe CONTROL Leveling Kits provide improved ground clearance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 2.0-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does not require disassembly of the strut/spring.

• Easy Bolt-on Installation, Requires no Modifications
• CNC Machined 6061 Billet Aluminum
• Increases Ground Clearance
• High Strength Hardware
• 2.0-Inch Front Lift
• Red Anodized Finish

This Part Fits:

aFe Control is proud to release the PFADT Series, Lowering Kit for 2005 & Up Corvette C6 & C7. This lowering kit is designed to lower your C6/C7 up to 1.25" enhancing the sleek, body lines, and giving it a more aggressive, stylish look. Designed to work with the factory transverse leaf springs, the package includes 4 lowering bolts. These aren't ordinary bolts, unlike the factory bolt and pad, our bolts feature a CNC, machined stainless steel stud with wrench flats, mated to a articulating foot, and a nylon foot pad. This design offers years of corrosion resistance and smooth suspension articulation, and quiet operation. Designed as a direct fit installation, no modifications is necessary. The lowering kit can be used with factory shock absorbers, or for a even better ride, try our Johnny O'Connell signature series shock upgrade.

• Engineering Design and Race Testing Ensures the Ultimate in Quality and Longevity
• 1 to 1-1/4" Drop for the Correct Relation Between Looks and Proper Function
• Powder-Coated Gloss Silver for Unbeatable Looks and Durability
• Engineered to Optimize the Factory Shock Absorber Damping
• Optimized Design for Both V6 and V8 Applications
• Front Spring Rate: 225 lbs/in
• Rear Spring Rate: 425 lbs/in

This Part Fits:

aFe Control is proud to release the PFADT Series, Lowering Kit for the Chevrolet Corvette C6 & C7 models. This lowering kit is designed to lower up to 1.25 IN to enhance the sleek body lines, while giving it a more aggressive, stylish look. Designed to work with the factory transverse leaf springs, the package includes 4 lowering bolts. These aren't ordinary bolts, unlike the factory bolt and pad, our bolts feature a CNC, machined stainless steel stud with wrench flats, mated to a articulating foot, and a nylon foot pad. This design offers years of corrosion resistance and smooth suspension articulation, and quiet operation. Designed as a direct fit installation, no modifications is necessary. The lowering kit can be used with factory shock absorbers, or for a even better ride.

• 1.25 IN drop for correct relation between looks and function
• Nylon foot pads for smooth articulation and quiet operation
• Stainless steel CNC machined adjuster stud w/ wrench flats
• Articulating ball stud for perfect alignment
• No modifications required
• Direct fit installation

This Part Fits:

The deeply pleated, high-quality filter media offers exceptional filtration capacity, preventing harmful particles from reaching your engine and reducing wear. An added foam pre-filter captures larger particles, preventing them from clogging the filter and enhancing protection throughout its lifespan, making it ideal for dusty or extreme driving conditions.

• Foam pre-filter provides added protection over OE filters without sacrificing airflow.
• Quality filter media protects engine from dirt, debris, & contaminates.
• Recommended replacement every 12,000-15,000 miles.
• Replaces OEM Mopar Part Number: 53034051AB

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Better Than Stock Replacement Cabin Filter
• Activated Carbon Reduces Odors and Fumes
• Easy To Install

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Better Than Stock Replacement Cabin Filter
• Activated Carbon Reduces Odors and Fumes
• Easy To Install

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Better Than Stock Replacement Cabin Filter
• Activated Carbon Reduces Odors and Fumes
• Easy To Install

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Better Than Stock Replacement Cabin Filter
• Activated Carbon Reduces Odors and Fumes
• Easy To Install

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Better Than Stock Replacement Cabin Filter
• Activated Carbon Reduces Odors and Fumes
• Easy To Install

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Better Than Stock Replacement Cabin Filter
• Activated Carbon Reduces Odors and Fumes
• Easy To Install

This Part Fits:

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Activated Carbon Reduces Odors And Fumes
• Easy To Install

This Part Fits:

This Part Fits: