Vehicle specific fitting kit required to mount ARB Bumper to the vehicle chassis. This fitting kit has been specially designed to work with this vehicle's safety systems.

• Includes All Hardware To Mount Bumper
• Vehicle Specific Design
• Bumper Mount Kit

This Part Fits:

Vehicle specific fitting kit required to mount ARB Bumper to the vehicle chassis. This fitting kit has been specially designed to work with this vehicle's safety systems.

• Includes All Hardware To Mount Bumper
• Vehicle Specific Design
• Bumper Mount Kit

This Part Fits:

ARB offers a wide array of bumper accessories such as winch installation kits, driving lights, looms, license plate kits, and hardware to complement our range of different bumpers, from the sleek Deluxe and Sahara styles, to the more functional Commercial bumper.

• Used with ARB Rear Bumpers
• Farm Jack Points

This Part Fits:

Built to the same uncompromising standards as our Bumpers, all ARB tire carriers incorporate a heavy duty towing system and depending on the vehicle may accommodate one or two tires or a jerry can holder. There are many benefits associated with fitting a tire carrier to a vehicle. Many 4x4s have their spare tire positioned underneath the vehicle making it difficult to access and vulnerable to damage, particularly in harsh off road environments. Others have their spare tire mounted on the back door, which can place stress on the door hinges, resulting in rattles and compromised dust sealing as increased wear is put on the door assembly. Both of these mounting methods can also prove unsuitable if a larger tire size is sought. An ARB tire carrier addresses all of these issues, relocating the spare tire onto the bumper assembly via a swing out carrier. Operation of the swing out carriers could not be more simple. Slight pressure applied to a lever opens each carrier with a gas strut assisting this process. The strut holds the carrier in the open position, with engagement of a locking pin only being necessary if the vehicle is on an extreme side angle. The carrier can be closed with a simple slam shut, with the spring loaded locking pin automatically disengaging as soon as the weight is released.

• Spare tire is secured to the stud plate with a lock nut with the provision to fit a padlock to secure the stud plate to the carrier
• A single carrier can be fitted, or the rear bumper can be installed without any carriers at all
• Wheel/jerry can carriers can be optioned on either side of the rear bumper on most vehicles
• Multi-fit spare wheel stud system provides flexibility for alternate rim selection
• Supplied in a durable powder coat finish with optional color coding available
• Requires ARB rear bumper to complete installation part 5615010 or 5615040
• Twin 33 or a single 35 tire can be accommodated on most vehicles
• Provision to mount an optional HF antenna bracket and camp light
• Carriers are mounted via dual shear pivots for maximum strength
• Spare Tire Carrier

This Part Fits:

Hi-lift Jack Bracket that mounts to the spare tire carrier of the ARB Rear Bumper system. ARB Rear Bumper system required.

• Mounts to ARB wheel carrier part 5700251 or 5700252
• For ARB Rear Bumpers with Spare Tire Carrier
• Hi-Lift Jack Mounting Bracket
• Jack Mounting Bracket

This Part Fits:

Combining functionality, strength and protection, ARB offers a rear bumper for the Ford Bronco (wide fender flares) that retains OE tow bar and wiring. The rear bumper includes two jack points and incorporates twin chassis-mounted rated recovery points. To complement the ARB Bronco protection equipment range, the bumper is finished in Integrit textured black powder coat.

• Twin jack points located in outer wings suit ARB Jack or mechanical jacks
• Vintage silver center panel houses the two central sensors and OE tow bar
• Vehicle-specific designs suit Ford Bronco wide fender flares
• Durable steel construction delivers maximum protection
• Zinc rich primer for additional corrosion resistance
• Compatible with rear parking sensors and OE tow bar
• Finished in Integrit black textured powder coat
• License plate relocated to spare wheel
• LED license plate included in kit

This Part Fits:

Combining functionality, strength and protection, ARB offers a rear bumper for the Ford Bronco (wide fender flares) that retains OE tow bar and wiring. The rear bumper includes two jack points and incorporates twin chassis-mounted rated recovery points. To complement the ARB Bronco protection equipment range, the bumper is finished in Integrit(TM) textured black powder coat.

• Twin jack points located in outer wings suit ARB Jack or mechanical jacks
• Vintage silver center panel houses the two central sensors and OE tow bar
• Vehicle-specific designs suit Ford Bronco wide fender flares
• Center Panel Houses The Two Central Sensors And OE Tow Bar
• Durable steel construction delivers maximum protection
• Zinc rich primer for additional corrosion resistance
• Compatible with rear parking sensors and OE tow bar
• Finished in Integrit black textured powder coat
• License plate relocated to spare wheel
• LED license plate included in kit

This Part Fits:

The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.

• Vehicle-specific design ensures excellent ground clearance and departure angles
• Provides greatly improved protection, versatility and vehicle access
• Facilitates easy access to both the roof and inside of the vehicle
• Center recess to accommodate various sized tires
• Manufactured From Steel For Maximum Strength

This Part Fits:

Whether you are chasing sunsets across the desert, riding sand dunes at the beach, or navigating trails through the forest, the ARB Summit Rear Bumper is the protection your Ford Ranger needs. From the press formed wings to the lower diffuser panels, each component has been designed to complement the vehicle's design in a stylish and practical manner, with no compromise to the level of protection. This rear bumper retains the OE towbar assembly, including trailer wiring and the license plate illumination. Press formed wings have been introduced to closely mimic the shape of the factory tub yet still provide greatly improved levels of protection compared to the original equipment tow bar and rear bumper.

• Compatible w/Optional Lower Protection Tube PN[5740200]
• Compatible w/Optional Lower Protection Tube PN 5740200
• Durable Steel Construction For Maximum Protection
• Finished In Integrit Textured Black Powder Coat
• Retains The OE Towbar Assembly
• Parking-Sensor Compatible
• Vehicle-Specific Design
• Press-Formed Wings

This Part Fits:

The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.

• Vehicle-specific design ensures excellent ground clearance and departure angles
• Combines Rear Vehicle Protection with Towing
• Manufactured from steel for maximum strength
• Suitable for Vehicles without Sensors
• Integrated Tow Hitch

This Part Fits:

The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.

• Vehicle-specific design ensures excellent ground clearance and departure angles
• Manufactured From Steel For Maximum Strength
• Combines Rear Vehicle Protection with Towing
• Suitable for Vehicles without Sensors
• Integrated Tow Hitch

This Part Fits:

The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.

• Rear bumper only, must be installed with either wheel carriers, jerry can holder or cover panels (sold separately)
• Vehicle-specific design ensures excellent ground clearance and departure angles
• Manufactured From Steel For Maximum Strength
• Combines Rear Vehicle Protection with Towing
• Suitable for Vehicles without Sensors
• Integrated Tow Hitch

This Part Fits:

ARB Under Vehicle Protection panels are designed to give protection to vital underbody components including steering, engine sump, transmission and transfer case. Laser cut, press formed and folded 3mm sheet steel is used in ARB UVP to provide superior strength. The ARB UVP to suit the Ford Bronco consist of four carefully designed panels. The front, sump and transmission and transfer case panels bolt directly to the chassis to provide continuous under vehicle protection from the front bumper to the rear of the transfer case. Each UVP panel includes a return edge to add strength to the 3mm panel. To retain the strength and protection required of an ARB UVP, full vehicle servicing will require the removal and refit of panels to obtain access to drain plugs and other service points. This provides an opportunity to check for damage and buildup of dirt and foreign matter. Provision is provided to drain engine oil only with removable insert in the second panel. ARB's UVP will fit with or without an ARB front bumper. Fitment has not been confirmed with other bumper designs.

• Four panels to help protect the front engine, front differential, rear engine sump, power steering, stabilizer bar, transmission, and transfer case
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• All steel components are protected with either powder coat or zinc plating
• 3mm press-formed, folded sheet steel adds superior strength
• Zinc plated and powder coated in a silver textured finish
• Kit Includes Illustrated Fitting Instructions
• Made from laser cut sheet steel

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Buffer kit required to complete installation of bumper part number 3913160 when installing the optional polished hoop.

• Provides unique styling to the Sahara Tube
• Molded protection buffers
• Buffer Kit

This Part Fits:

An optional polished or painted center tube offers a different look to the more traditional bumper design. An internal mandrel bender is used to shape the center tube, ensuring even wall thickness throughout.

• Provides unique styling to the Sahara Tube
• Molded protection buffers
• Buffer Kit

This Part Fits:

Old Man Emu brings racing technology to every day adventures: BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance. Developed and extensively tested under the harshest conditions in Australia, these big bore, position sensitive bypass shock absorbers with remote reservoir are designed to bolt onto your vehicle without any vehicle modifications and combine considerable ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off road. The damping performance is easily adjustable across a wide range of rebound and compression, resulting in significant changes to the ride performance of your vehicle, enabling a custom tune to suit the conditions and vehicle set up. The body, reservoir and components are all made from 6061 T6 aluminum, Type 3 40 micron hard anodized ensuring exceptional heat dissipation, corrosion resistance and resistance to stone damage. Not only designed, developed and tested entirely by ARB's team of Old Man Emu ride engineers, all BP-51 shock absorbers are manufactured in-house by ARB. In order to achieve this, significant investment has been made in state of the art machinery providing ARB total control of the manufacturing process to ensure the highest possible quality.

• Accommodates The Additional Vehicle Weight
• A 6061 grade aluminum top hat

This Part Fits:

Old Man Emu brings racing technology to every day adventures: BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance. Developed and extensively tested under the harshest conditions in Australia, these big bore, position sensitive bypass shock absorbers with remote reservoir are designed to bolt onto your vehicle without any vehicle modifications and combine considerable ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off road. The damping performance is easily adjustable across a wide range of rebound and compression, resulting in significant changes to the ride performance of your vehicle, enabling a custom tune to suit the conditions and vehicle set up. The body, reservoir and components are all made from 6061 T6 aluminum, Type 3 40 micron hard anodized ensuring exceptional heat dissipation, corrosion resistance and resistance to stone damage. Not only designed, developed and tested entirely by ARB's team of Old Man Emu ride engineers, all BP-51 shock absorbers are manufactured in-house by ARB. In order to achieve this, significant investment has been made in state of the art machinery providing ARB total control of the manufacturing process to ensure the highest possible quality.

• Accommodates The Additional Vehicle Weight
• A 6061 grade aluminum top hat

This Part Fits:

Bring on the rocks! These ARB rock sliders are manufactured from tough, tubular steel making them ideal for steep, rocky terrain.

• Designed to protect door sills from rocks, logs, and ruts
• Engineered to take the weight of the vehicle
• Manufactured from tough, tubular steel
• Ideal for use in challenging terrain
• Rock Rail

This Part Fits:

Whether you're a seasoned overlander or a newbie off-roader ? we can all reap the benefits of an onboard air compressor. This invaluable adventure upgrade can easily be installed under the hood of your Ford Bronco with the ARB Compressor Engine Bay Mount that has been validated by Ford Engineers. The unique mounting solution provides enough space to cater a single or twin compressor, switch, and manifold. The mount is 100% bolt-on and uses factory mounting points with support for both 2.3L and 2.7L engines.

• Works with CKSA, CKMA, and CKMTA ARB compressors (sold separately)
• Quick and easy installation, requiring a few hand tools
• Mount is 100% bolt-on and uses factory mounting points
• Quick And Easy Installation/Requiring A Few Hand Tools
• Handy switch located next to the compressor
• Black powder-coat finish

This Part Fits:

When storage space is at a premium, making use of what you have in new ways is at the forefront of ARB design. Securely store your ARB Jack in the inside tailgate of your vehicle for easy access when needed.

• For use with the ARB Jack part number 1060001 (sold separately)
• Detent pins to stop the knobs from twisting for added security
• Quick-release Clamps To Hold The Jack Securely In Place
• Fabricated from steel with a black powder-coat finish
• Located inside the vehicle tailgate for easy access
• Exclusive design for the Ford Bronco

This Part Fits:

Supplementary Fog Light Kit for those vehicles without OE fog lights. The kit includes an ARB developed fog light and wiring loom intended for use with ARB Bronco Bumpers.

• Attaches to the same brackets that come with the bumper intended for OE fog lights
• Includes Intesity Driving LED Wiring Loom PN [3501101/3500520]

This Part Fits:

Mounting a compressor in modern day vehicles has become more and more of a challenge as engine bays in modern vehicles have limited room for the installation of aftermarket accessories. To combat this, ARB has introduced a high quality, engineered bracket system to integrate the ARB compressor into your vehicle. The Jeep Wrangler JL Compressor Bracket allows you to install a CKMTA, CKMA, or CKSA (locker only) compressor with optional Air Locker(TM) solenoids, quick connect coupling, switch, manifold kit (CKMTA only) and ARB LINX PRV (pressure regulator) under either the left or right front seat. An additional bracket is included for fitment of the 4L ARB Air Tank to the underside of the vehicle (not suitable for the 2.0L e-torque engine). The under seat location was chosen because it caters to the fitment of a twin compressor and doesnt interfere with cargo space. However, due to space constraints, the air tank is mounted underneath the vehicle. The Jeep Wrangler JL Compressor Bracket includes a comprehensive installation guide showing detailed instructions on fitting the twin ARB Compressor, 4L air tank, Air Locker(TM) manifold kit with switch, and quick connect coupling to the bracket and the bracket to the vehicle.

• An Additional Bracket Is Incl. For Fitment Of The 4L ARB Air Tank
• Bracket Allows You To Install A CKMTA
• CKMA Or CKSA

This Part Fits:

Like the unique destinations off-roaders travel to, each vehicle is different from the next. The Universal Switch Coupling Bracket from ARB helps you create a purposeful 4x4 vehicle by making the installation process that much easier.

• Textured black gives an OE looking, high quality resistant finish
• Recessed switch placement protects side and reduces front damage
• Recessed air coupling placement partially protects its side
• Fits many existing plastic trim panels in modern vehicles
• Complete fitment kit for convenient and fast installation
• Easily integrates into existing or new drawer systems
• Switch And Air Coupling Sold Separately

The Air Compressor Mounting Bracket works with CKSA12, CKMA12, and CKMTA12 compressors.

• Air Compressor Mounting Bracket

Optional fog light installation kit for vehicles with OE Factory Fog Lights. Different part numbers required to install the optional foglight kit for vehicles that did not come with OE Fog Lamps. See vehicle application guide for details.

• Glass-filled nylon housing for superior strength
• Fine-thread screw adjuster for fog light aiming
• SAE and ECE R19 certified fog light pattern
• Fitment may require ARB loom PN 3500520
• Designed specifically for ARB bumpers
• Kit includes two LED fog lights
• Hard-coated polycarbonate lens
• Fog Light Kit

Protect your lighting investment with these OEM IPF light covers from ARB. Blue IPF/ARB acrylic lens cover. Fits 900XS Series lights.

• Designed for optimum strength and impact resistance
• Clear Fog Light Covers
• Fog Light Cover Kit
• Sold as a pair