Complete your vehicle's rear protection system with the ARB Cover Panel designed specifically for the right-hand side (RHS) of an ARB Rear Step Towbar. This panel provides a finished, professional appearance to the towbar assembly while protecting internal components from road debris, mud, and moisture accumulation.

Manufactured to withstand the rigors of off-road use, this replacement panel features a durable black finish that matches the texture and tone of the original ARB equipment. It is an essential component for restoring the aesthetics and utility of your rear bar following a repair or a custom install.

• Side: Right Hand Side (RHS)
• Application: ARB Rear Step Towbar systems
• Finish: Textured Black
• Function: Protective cover and aesthetic trim

Maintain the clean, finished appearance of your rear protection system with this genuine ARB replacement cover panel. Designed specifically for the left-hand side (LHS) of ARB Rear Step Towbar assemblies, this panel serves as a direct replacement for original components that have been scuffed, dented, or lost on the trail or job site.

• Precision Fit: Engineered to match the exact contours and mounting points of ARB Rear Step Towbars for a seamless installation.
• Durable Construction: Manufactured to ARB's rigorous standards to withstand road debris and harsh environmental conditions.
• Protective Finish: Features a resilient black coating that matches the original bar’s aesthetic while providing corrosion resistance.
• System Integrity: Restores the integrated look of the rear bumper assembly, ensuring no internal brackets or hardware remain exposed.

This component is side-specific and intended for the left-hand side of the vehicle only. It is a functional replacement part to keep your ARB rear protection system in top condition.

Fits 1987-2006 Jeep Wrangler YJ and TJ models (Base, Sport, Sahara, Rubicon, Unlimited, and SE).

The Rampage heavy-duty rear tailgate tire extender provides the necessary clearance to mount an oversized spare tire on your factory tailgate. By raising and extending the spare tire mounting location, this bracket prevents interference with the rear bumper and bodywork. This is a direct-fit solution that bolts onto the factory door mounts for a straightforward installation.

• Raises and extends spare tire location to accommodate oversized wheels and tires
• Heavy-duty construction with a durable black finish for corrosion resistance
• Bolts directly to factory tailgate mounting points using existing hardware
• Replaces the need for a full swing-away carrier for moderately oversized tires
• Manufacturer Part Number: 86616

Note: Always check factory tailgate and hinge specifications for maximum weight capacity before mounting oversized tire and wheel combinations.

Fits 2005-2015 Toyota Tacoma (Base, Pre Runner, TRD Pro, and X-Runner).

The Body Armor 4x4 Pro Series Tire Carrier (TC-5293) is a heavy-duty accessory designed exclusively for use with the TC-2961 rear bumper. Engineered to meet the demands of off-road recovery and storage, this carrier utilizes a robust 2-inch square tube steel design to provide a secure mounting point for oversized spares up to 35 inches in diameter.

The installation process is straightforward and requires no drilling, bolting directly to the existing bumper setup. To ensure long-term durability against the elements, the carrier is finished in a two-stage heavy texture black powdercoat. This design also thoughtfully retains the shackle plates, allowing you to maintain full use of your D-ring recovery points for trail safety.

• Exclusively compatible with Body Armor 4x4 TC-2961 rear bumper
• Supports up to a 35" tall spare tire
• Constructed from heavy-duty 2" square steel tubing
• Retains bumper shackle plates for D-ring recovery
• Durable two-stage heavy texture black powdercoat finish
• No-drill, bolt-on installation
• Manufacturer Part Number: TC-5293

The Rugged Ridge Spartacus HD Tire Carrier System provides the essential strength and stability required for mounting oversized wheel and tire combinations on 1997-2006 Jeep Wrangler TJ models. Engineered to manage the amplified forces and vibrations of off-road driving, this system replaces factory hinges to prevent tailgate sag and wear.

This kit features a precision die-cast aluminum hinge casting for maximum strength without the weight penalty of steel, paired with forged steel hinge brackets and hardened steel pins for superior load capacity. The one-piece design maintains convenient one-handed access to the cargo area while rigidly linking the adjustable wheel mount to the reinforced section of the rear quarter panel. The mount includes depth and tilt adjustability to accommodate various tire offsets and diameters up to 37 inches.

• Fits 1997-2006 Jeep Wrangler TJ (SE, Sport, Sahara, Rubicon, X, and Unlimited)
• Construction: Die-cast aluminum hinge casting with forged steel brackets and hardened steel pins
• Tire Capacity: Rated for combinations up to 37 inches
• Durability: Tested to MIL-STD-810 standards for extended off-road vibration and duration
• Adjustability: Built-in depth and tilt adjustment for wide and large diameter tires
• Installation: Direct bolt-on design with no drilling required
• Compatibility: Works with OE and most aftermarket rear bumpers
• Includes: HD tire carrier system and adjustable third brake light bracket
• Manufacturer Part Number: 11546.60

Fits 1990-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450 Base models (80 Series).

The ARB Left Hand Side (LHS) Spare Tire Carrier provides a rugged, practical solution for relocating your spare wheel from the vulnerable under-vehicle position or the factory door hinges. By mounting the tire directly to the ARB rear bumper assembly via a heavy-duty swing-out arm, you eliminate stress on the rear door assembly and prevent rattles and seal failure. This carrier is specifically designed for 80 Series models equipped with fender flares and features a durable black powder-coated finish.

Operation is engineered for ease of use, utilizing a gas-strut-assisted opening mechanism that holds the carrier in position even on uneven terrain. The dual shear pivot design ensures maximum structural integrity, while the multi-fit wheel stud system accommodates various rim selections. This unit requires an ARB rear bumper to complete the installation and is capable of carrying up to a 35-inch tire.

• Manufacturer Part Number: 5711231
• Gas strut assisted swing-out operation for simple one-handed use
• Dual shear pivots for superior arm strength and durability
• Secure locking system with provision for a padlock
• High-quality black powder coat finish
• Compatible with models featuring OE fender flares
• Provision for optional camp light or HF antenna brackets
• Accommodates up to a 35-inch spare tire
• Note: Requires ARB rear bumper for installation

Fits 2018-2025 Jeep Wrangler JL models (including Rubicon, Sahara, Sport, and 4xe variants).

The Rugged Ridge Spartacus HD Tire Carrier Kit (MPN 11546.55) provides a robust mounting solution for oversized wheels and tires on your Wrangler JL. Engineered to support up to a 40-inch wheel and tire combination, this system reinforces the tailgate to prevent the sagging and structural fatigue often caused by heavier aftermarket rubber. By replacing the factory hinge with a precision-cast aluminum assembly and a heavy-duty steel wheel mount, you gain a massive increase in load capacity while maintaining convenient one-handed entry to the cargo area.

• Supports up to a 40-inch wheel/tire combination.
• Solid aluminum hinge casting for superior strength without excessive weight.
• Heavy-duty steel wheel mount ensures secure positioning.
• Compatible with both OE and most aftermarket rear bumpers.
• Vibration tested to hybrid SAE/MIL-Spec standards for off-road durability.
• Preserves factory one-handed tailgate operation.
• Manufacturer Part Number: 11546.55.

Optimizing tire pressure is critical for off-road performance, allowing for a larger contact patch and a more compliant ride over rough terrain. The Rugged Ridge 4-Piece Brass Tire Deflator Kit (MPN 15104.53) provides a reliable, repeatable way to air down your tires before hitting the trail. Unlike manual bleeding, these deflators can be set to your preferred PSI and will automatically stop when the target pressure is reached.

• Universal Compatibility: Designed to work with most tire and wheel combinations utilizing standard Schrader valve stems.
• Adjustable Pressure: Easily calibrated to your specific off-road requirements for consistent traction in sand, mud, or rock crawling.
• Durable Construction: Machined from high-quality brass for long-term corrosion resistance in harsh outdoor environments.
• Set of 4: Allows you to deflate all four tires simultaneously, saving time at the trailhead.
• Part Number: 15104.53
• Warranty: Includes a limited 5-year manufacturer warranty.

Fits 2018-2025 Jeep Wrangler JK and JL models, including Rubicon, Sahara, Sport, Willys, and Unlimited trims.

After upgrading to an aftermarket rear bumper, license plate placement often becomes an afterthought. The Rugged Ridge Tag Relocation Bracket (MPN: 11585.25) provides a professional solution, moving your plate from the vulnerable factory bumper pocket to a secure, highly visible position on the spare tire carrier. This relocation protects your tag from trail damage while ensuring it remains street-legal and visible.

Constructed from heavy-duty steel with a durable satin black powder coat finish, this bracket is built to withstand off-road vibration and harsh weather. The design is fully adjustable to accommodate various wheel widths and offsets, ensuring a flush fit against your spare. Critically, this bracket is engineered for full compatibility with factory rearview camera equipment, preserving your safety features without modification.

• Relocates license plate to the center of the spare tire carrier
• Maintains factory backup camera functionality
• Fully adjustable for different wheel and tire offsets
• Durable steel construction with satin black powder coat
• Manufacturer Part Number: 11585.25
• Limited 5-Year Warranty

Fits select 1976-2018 Jeep CJ5, CJ7, Scrambler, and Wrangler models (including JK).

Clear larger aftermarket bumpers or oversized spare tires with the Rugged Ridge Spare Tire Spacer. This spacer is engineered to relocate your spare tire two inches up and two inches out, providing necessary clearance while utilizing your factory mounting points. Constructed to original Omix specifications, it features a durable black powder-coated finish to resist corrosion and the elements during off-road use.

This component is designed as a direct-fit solution for vehicles with 5x4.5-inch or 5x5.5-inch wheel bolt patterns. Please note this spacer is specifically intended for use with part number 18676.60.

• Manufacturer Part Number: 11585.02
• Relocation: 2 inches up and 2 inches out
• Bolt Patterns Supported: 5x4.5 in. and 5x5.5 in.
• Finish: Black Powder Coated
• Installation: Bolts to existing factory spare tire mount
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 1987-2006 Jeep Wrangler (All submodels including Sport, Sahara, Rubicon, SE, and Base).

Upgrading to oversized tires requires a spare tire that matches your rig's capability, but factory mounts often lack the clearance for wider wheel and tire combinations. The Rugged Ridge HD Tire Carrier Mount solves this by relocating your spare tire two inches further away from the tailgate, providing the necessary space for up to a 35-inch tire.

Constructed from heavy 1/4-inch steel plate, this bracket is engineered to handle the increased weight and leverage of larger tires. It bolts directly to the factory mounting points on the tailgate for a secure installation that maintains accessibility and functionality.

• Construction: 1/4-inch heavy-duty steel plate
• Offset: Relocates tire 2 inches further from the body for maximum clearance
• Compatibility: Supports spare tires up to 35 inches in diameter
• Fitment: Direct bolt-on for 1987-2006 Jeep Wrangler models
• Manufacturer Part Number: 11585.01
• Warranty: Limited 5-year warranty

Fits all 2020-2025 Jeep Gladiator models including Mojave, Rubicon, Overland, Sport, and Willys. The Rugged Ridge Bed Mount Spare Tire Carrier solves the clearance and accessibility issues caused by oversized spare tires on the Gladiator JT. While factory spares are tucked under the bed, larger 35-inch to 40-inch tires significantly impact departure angles and are difficult to access in mud or rocky terrain.

This pre-runner-style carrier relocates your spare into the truck bed, mounting high enough to allow for hauling flat cargo like plywood underneath. Engineered for harsh off-road use, it features a sturdy frame built from 45mm diameter, 2.5mm-wall steel tubing and 5mm thick CNC-cut, brake-formed steel plate. The integrated wheel mount is fully adjustable to accommodate various wheel offsets, ensuring a secure fit for your specific wheel and tire combo.

• Fits up to a 40-inch wheel and tire combination
• Constructed from 45mm diameter (2.5mm wall) steel tubing and 5mm thick steel plate
• Satin black powder coat finish for maximum corrosion resistance
• No-drill installation using factory mounting locations for superior rigidity
• Adjustable wheel mount depth to fit different offsets
• Manufacturer Part Number: 11546.71
• Limited 5-Year Warranty

Fits 1987-2006 Jeep Wrangler (YJ and TJ) including Sport, Sahara, Rubicon, and Unlimited models.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount (MPN: 11546.62) provides the structural integrity and adjustability required for mounting oversized wheel and tire combinations. This mount lifts the mounting position and features integrated depth and tilt adjustability to accommodate large-diameter and wide tires, preventing interference with the rear bumper or bodywork. When paired with the Spartacus HD Tire Carrier Hinge Casting (P/N 11546.51 or 11546.61), this system supports up to and including 37-inch tire diameters.

Constructed from heavy-duty steel, this mount maintains the convenience of one-handed entry to the cargo area. It is designed to work with original equipment and most aftermarket rear bumpers without the need for drilling. The kit includes an adjustable third brake light bracket to ensure visibility is maintained even with larger spares installed.

• Heavy-duty steel construction for increased load capacity
• Depth and tilt adjustability for oversized wheel and tire offsets
• Supports up to 37-inch tires when used with HD hinge casting
• Includes adjustable third brake light bracket
• No-drill installation using factory mounting points
• Manufacturer Part Number: 11546.62

Fits select 1997-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models. The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting is engineered to provide the strength and stability required to mount oversized wheel and tire combinations. This heavy-duty upgrade manages the increased leverage and vibrations common in off-road environments, preventing the tailgate sag and wear associated with factory hinges.

Constructed from precision die-cast aluminum, this one-piece hinge casting offers exceptional structural integrity without the weight penalty of solid steel. The system utilizes forged steel hinge brackets and hardened steel pins to significantly increase load capacity over original equipment. The design maintains convenient one-handed access to the cargo area and is compatible with both 5x4.5 and 5x5-inch wheel bolt patterns. It installs without drilling and works with OE and most aftermarket rear bumpers.

• Manufacturer Part Number: 11546.61
• Materials: Die-cast aluminum casting with forged steel brackets and hardened steel pins
• Finish: Durable black powder coat
• Wheel Bolt Patterns: 5x4.5-inch and 5x5-inch
• Load Capacity: Supports up to 37-inch tire when used with Spartacus HD Wheel Mount (P/N 11546.52)
• Installation: Bolt-on design; no drilling required

Fits select 2018-2026 Jeep Wrangler and Wrangler Unlimited models.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount provides a robust solution for carrying oversized spares on your JL. Engineered from fully-welded heavy-duty steel, this mount distributes weight across a broad footprint to manage the increased load of tires up to 40 inches. The adjustable mounting brackets allow for angled positioning of the spare, providing better bumper clearance and easier access to the rear liftgate.

Designed for durability and utility, each mount features a satin black powder-coated finish for superior corrosion resistance. This kit includes the necessary brackets to reposition your factory backup camera and third brake light, maintaining safety and visibility. For maximum strength, it is recommended to pair this wheel mount with the Spartacus HD Hinge Casting (part number 11546.56).

• Supports up to 40-inch tires
• Heavy-duty steel construction with a satin black powder coat finish
• Vibration tested to Hybrid SAE/MIL-Spec standards
• Direct bolt-on installation with no drilling required
• Compatible with OE and all aftermarket rear bumpers
• Includes backup camera and third brake light relocation brackets
• Manufacturer Part Number: 11546.57

Fits select 2018-2025 Jeep Wrangler JL, including Unlimited, Rubicon, Sahara, Sport, and 4xe models.

The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting (MPN: 11546.56) provides the structural integrity needed to mount oversized wheel and tire combinations. Engineered to manage the amplified force and vibrations experienced during extreme off-road driving, this hinge casting replaces factory components to prevent tailgate sagging and long-term wear. The one-piece design maintains convenient one-handed access to the cargo area by rigidly linking the wheel mount to the reinforced section of the rear quarter panel.

• Precision die-cast aluminum hinge casting for maximum strength without the weight of steel.
• Forged steel hinge brackets and hardened steel pins for superior load capacity over OE hinges.
• Accommodates both 5x4.5-inch and 5x5-inch wheel bolt patterns.
• Durable black powder coat finish for corrosion resistance.
• Compatible with OE and most aftermarket rear bumpers.
• Simple no-drill installation.
• Pairs with Spartacus HD Wheel Mount (P/N 11546.52) for carrying capacity up to 37-inch tires.

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount (MPN 11546.52) is engineered to provide the structural integrity and adjustability required for oversized wheel and tire combinations. This mount lifts the mounting position of the spare to accommodate larger diameters while incorporating both depth and tilt adjustability to ensure wide tire options clear the rear bumper and sit flush against the carrier. Constructured from heavy-duty steel, it maintains the convenience of one-handed entry to the cargo area.

• Specifically designed for 2007-2018 Jeep Wrangler JK models
• Lifts mounting position and provides depth/tilt adjustability for oversized spares
• Heavy-duty steel construction for increased load capacity
• Includes adjustable third brake light bracket to maintain visibility
• Compatible with OE and most aftermarket rear bumpers
• Direct bolt-on installation with no drilling required
• Manufacturer Part Number: 11546.52
• Recommended pairing with Spartacus HD Tire Carrier Hinge Casting (P/N 11546.51) for carrying tires up to 37 inches

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (2-door and 4-door models).

The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting provides the essential structural reinforcement needed to carry oversized wheel and tire combinations. This heavy-duty hinge is precision-engineered to manage the increased leverage and vibration encountered during off-road use, preventing the tailgate fatigue and sagging common with factory hardware. The one-piece design maintains convenient one-handed access to the cargo area while rigidly linking the wheel mount to the reinforced rear quarter panel.

Constructed from precision die-cast aluminum, this hinge provides maximum strength without the weight penalty of solid steel. It features forged steel hinge brackets and hardened steel pins for a load capacity that significantly exceeds OE specifications. For maximum performance and carrying capacity for up to 37-inch tires, pair this casting with the Spartacus HD Wheel Mount (P/N 11546.52).

• Heavy-duty die-cast aluminum construction with forged steel brackets
• Hardened steel pins for superior longevity and wear resistance
• Compatible with factory and most aftermarket rear bumpers
• No-drill installation using existing factory mounting points
• Maintains one-handed entry to the cargo area
• Manufacturer Part Number: 11546.51

Secure your full-size off-road spare with the N-Fab Bed Mounted Rapid Tire Strap. Engineered for universal fitment in any pickup bed, this heavy-duty system is designed to lock down tires ranging from 33 inches to 40 inches in diameter. The 3-point mounting configuration ensures maximum stability during high-speed off-road travel or technical crawling.

• Fits tires from 33 to 40 inches in diameter
• Universal mounting system compatible with most pickup truck beds
• Two unique rotating "turret" brackets for optimized rear bed positioning
• Single fixed mount with an included backing plate for the front
• High-strength steel N-FAB buckle with a durable textured black powder coat
• Heavy-duty front ratchet strap paired with two fixed-length rear straps for extreme tension
• Gloss black hardware finish for superior corrosion resistance
• Manufacturer Part Number: BM1TSBK

The Fabtech Universal Angled Spare Tire Mount (FTT10002BK) provides a secure, space-efficient solution for carrying an oversized spare in any truck bed. Designed for versatility, this mount can be positioned anywhere in the bed to suit your cargo layout, providing a clean and functional alternative to factory under-chassis storage.

• Durable Construction: Built using 1 1/4-inch steel tubing with MIG-welded joints for maximum structural integrity and long-lasting durability in off-road environments.
• Tire Capacity: Engineered to securely hold a full-size spare tire measuring up to 35 inches in diameter.
• Installation: Requires drilling only four holes for a permanent and stable mount to the truck bed floor.
• Finish: Finished in a resilient black coating to resist corrosion and wear.

Whether you are outfitting a chase truck or simply need a accessible spare for the trail, this angled carrier offers a professional-grade mounting solution. Part Number: FTT10002BK.

The Fabtech FTT10001BK Universal Spare Tire Flat Mount provides a versatile and secure solution for carrying a full-size spare tire in your truck bed. Designed for universal application, this mount allows you to position your tire anywhere in the bed to optimize cargo space or weight distribution.

This flat mount features a durable base plate that offers two distinct installation methods. You can bolt the plate directly to the top of the bed floor for a permanent mounting point, or install the plate underneath the bed floor. The sub-mount option provides a clean, factory look, allowing you to remove the tire carrier without leaving visible mounting hardware behind. Installation is straightforward and requires drilling four holes to secure the assembly to the vehicle.

• Manufacturer Part Number: FTT10001BK
• Mounting Type: Universal Flat Mount
• Finish: Black powder coat
• Installation: Requires drilling four holes
• Flexibility: Can be surface-mounted or sub-mounted for a hidden look

Fits 1998-2016 Toyota Land Cruiser Base models.

The ARB Right Hand Side (RHS) Spare Tire Carrier addresses the common limitations of factory tire mounts. By relocating the spare tire from the underbody or the rear door to the bumper assembly via a swing-out carrier, it protects the wheel from off-road damage and prevents stress-induced rattles and dust seal failure on the rear door hinges. This heavy-duty system is designed to accommodate a single 35-inch tire or twin 33-inch tires on most applications, providing the clearance needed for oversized off-road rubber.

Built for ease of use, the carrier features a gas-strut assisted opening mechanism that holds the arm in position even on uneven terrain. The carrier secures with a simple slam-shut operation, while the dual shear pivots ensure maximum structural integrity during high-vibration trail driving. The multi-fit stud system allows for various wheel offsets and bolt patterns, providing flexibility for aftermarket wheel selections.

• Fits 1998-2016 Toyota Land Cruiser Base
• Relocates spare tire to a secure, swing-out bumper mount
• Gas-strut assist for effortless opening and holding
• Heavy-duty dual shear pivots for maximum strength
• Durable black powder coat finish
• Multi-fit spare wheel stud system for alternate rim selection
• Provision for optional HF antenna bracket and camp light
• Requires ARB rear bumper (Part #5615010 or 5615040) for installation
• Manufacturer Part Number: 5700252

Securing a full-size spare tire can be a challenge on modified trucks where oversized rubber no longer fits the factory under-bed location. The Addictive Desert Designs Universal Tire Carrier is engineered to solve this, providing a secure mounting solution within the truck bed for most modern pickups. This carrier is designed to accommodate tires ranging from 33 inches up to 40 inches in height with an actual measured width of up to 14 inches.

Constructed for durability and flexibility, the T99918NA01NA features a series of mounting holes that allow for precise placement in your bed. The design is compact enough to allow two carriers to be mounted side-by-side for dual-spare setups. Integrated slots at the front and rear are specifically positioned to support a three-point Y-strap (one front anchor, two rear anchors) to keep your spare stationary during aggressive off-road driving.

• Fits most modern truck beds
• Accommodates tires from 33" to 40" tall and up to 14" wide
• Precision-cut slots for 3-point Y-strap tie-downs
• Durable Hammer Black powder coat finish
• Versatile mounting hole pattern for custom positioning
• Sold individually
• Manufacturer Part Number: T99918NA01NA