If you want the best for your ride, look no further. The 2021+ Ford F150 2WD and 4WD flip kit expertly relocates the original leaf springs below the axle. By doing so, we achieve a rear lowered ride height of 4.5" for the 2WD and 5.5" for the 4WD. The kit is powder-coated to prevent corrosion caused by dirt or debris. We feature front leaf spring hangers to reposition the mounting point of the springs, pinion positioning axle saddles with pinion shims, high grade 9/16" U-bolts, notched U-bolt plates, U-bolt spring pads, and new shackles with bushings that help cancel noise and absorb vibrations. All precision designed to fit flawlessly with the original leaf springs. Build the ride you need with Belltech.

• Most include: axle saddles, U-bolts, U-bolt plates, shock extentions, C-notch
• Most include: axle saddles, U-bolts, U-bolt plates, shock extensions, C-notch
• Relocates rear axle from below to the top of leaf spring
• 4.5" 2wd / 5.5" 4wd drop (Note: Application specific)
• Black powder coated finish
• Installation instructions
• Black powdercoated finish
• Grade 8 hardware

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 1" or 2" rear drop

This Part Fits:

Belltech Shackle and Hanger Kits are designed to lower the rear of your leaf spring equipped Sport Truck or SUV by up to 5" (Note: Application dependent). Belltech's redesigned Shackle and Hangers reposition the front and/or rear leaf spring mounting points (spring eyes) so you can simply and effectively lower your leaf spring equipped Sport Truck or SUV without modifying or changing the factory leaf spring. This allows you to retain OEM ride quality and more importantly factory load capacity.

• Simply and effectively lower your leaf spring equipped Sport Truck or SUV without modifying or changing the factory leaf spring.
• Grade 8 hardware and driveline angle corrections (where applicable)
• Retains factory ride quality and load capacity
• Includes: 2x leaf spring hangers, 2x shackles
• 4" rear drop

This Part Fits:

Belltech leaf spring Hanger Kits are designed to minimally lower the rear of your leaf spring equipped Sport Truck or SUV by 2-4" (Note: Application dependent). Belltech's redesigned Hangers reposition the front or rear leaf spring mounting points (spring eyes) so you can simply and effectively lower your leaf spring equipped Sport Truck or SUV without modifying or changing the factory leaf spring. This allows you to retain OEM ride quality and more importantly factory load capacity.

• Designed to minimally lower the rear of your leaf spring equipped Sport Truck or SUV by 2-4" (Note: Application dependent)
• Includes front or rear leaf spring hangers (Note: Application specific)
• Progressive rate Polymer bump stops
• Progressive rate Polymer bumpstops
• Installation instructions
• Grade 8 hardware

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 2" rear drop

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 2" or 3" rear drop

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 1" rear drop

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 3" rear drop

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 2" or 3" rear drop

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 2" rear drop

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution
• 4' drop block kit

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• 3" drop block kit w/ 2 degree taper
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution
• 3" drop block kit

This Part Fits:

Lower your Sport Truck or SUV right the first time. Belltech Nitro Drop 2 complete lowering kits include all the parts, pieces and shock absorbers you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.

• Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
• Kit Includes Nitro Drop 2 shock absorbers

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution
• 2" drop block kit

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• 2" drop block kit w/ 2 degree taper
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution
• 2" drop block kit

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution
• 1" drop block kit

This Part Fits:

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

• Fits most mini/mid-size trucks w/ 3" axle tube
• U-bolts and grade 8 hardware included
• 1" drop block kit w/ 2 degree taper
• Extrude alluminum construction
• Extrude aluminum construction
• Safe/economical solution

This Part Fits: