Maintain the precision and safety of your adjustable suspension with the BLOX Racing Competition Series replacement sliding ball joint. This heavy-duty component is specifically engineered as a direct replacement for units found in BLOX Racing sliding front camber kits, allowing you to restore proper suspension geometry and eliminate front-end play caused by worn joints.

Designed to withstand the increased stresses of lowered ride heights and competitive driving, this ball joint provides the structural integrity needed for consistent alignment settings. Whether you are refreshing a high-mileage street car or preparing for a track event, these replacement joints ensure your sliding camber kit remains secure and responsive.

• Manufacturer Part Number: BXSS-20201-CBJ
• Series: Competition (Sliding)
• Application: Replacement component for BLOX Racing sliding front camber kits
• Construction: High-strength materials designed for track and performance street use
• Function: Restores precise camber adjustment and steering feedback

The BLOX Racing replacement sliding ball joint is a heavy-duty, 1-piece component engineered for use with adjustable front upper control arms. This sliding joint is essential for maintaining precise camber settings, allowing for proper suspension geometry and tire contact on performance-driven or lowered vehicles.

Constructed with high-strength materials to withstand the stresses of aggressive driving, this replacement joint serves as a direct service part for worn or damaged units in BLOX Racing camber kits. Installing a fresh ball joint restores steering precision and ensures that your alignment settings remain secure under load.

• Manufacturer Part Number: BXSS-20201-BJ
• Configuration: 1-Piece Sliding Ball Joint
• Application: Replacement for adjustable upper control arm camber kits
• Finish: Durable coating for corrosion resistance
• Restores handling and alignment stability

Fits select 1990-2001 Acura Integra, 1992-2000 Honda Civic, and 1993-1997 Honda Civic del Sol.

The BLOX Racing Rear Toe Kit (BXSS-20102) is a necessary upgrade for enthusiasts looking to maintain proper suspension geometry on lowered vehicles. When a car is lowered, the factory adjustment range often becomes insufficient to bring the rear wheels back into alignment, leading to uneven tire wear and unpredictable handling. This kit replaces the factory rear toe links with high-quality, adjustable units that provide a significantly wider range of motion.

By allowing for precise toe-in and toe-out adjustments, this kit ensures your tires maintain an optimal contact patch for better stability and longer tread life. Whether you are setting up a car for the street or the track, these links provide the durability and accuracy required to dial in your rear suspension.

• Direct bolt-on replacement for factory rear toe arms
• Corrects rear toe geometry on lowered vehicles to prevent premature tire wear
• Provides an increased range of adjustment over OEM hardware
• Durable construction suited for high-performance driving conditions
• Manufacturer Part Number: BXSS-20102

Fits 1988-2001 Honda Civic, CRX, del Sol, and Acura Integra (All Trims).

The BLOX Racing Rear Camber Kit (BXSS-20101) is an essential suspension component for enthusiasts who have lowered their vehicles. Dropping a vehicle's ride height naturally increases negative camber; this kit provides the adjustability needed to bring the rear wheels back into proper alignment. By correcting the wheel angle, you ensure a flat tire contact patch for improved traction and prevent premature, uneven tire wear.

• Allows for precise rear camber adjustment on lowered vehicles
• Replaces the fixed-length factory rear upper control arms
• Improves handling stability and extends tire life
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: BXSS-20101

Whether you are prepping for a track day or fine-tuning a daily driver, these adjustable arms offer the range of motion required to achieve optimal alignment specifications.

Fits 2006-2011 Honda Civic (DX, EX, EX-L, GX, Hybrid, Hybrid-L, LX, LX-S, MUGEN Si, and Si).

Lowering your vehicle alters the factory suspension geometry, often resulting in a roll center that is below ground level. This causes increased body roll and reduced front-end grip. BLOX Racing Roll Center Adjusters (BXSS-20003) utilize extended front ball joints to reposition the control arms, effectively raising the roll center back toward its ideal position. This modification restores the original suspension arc, reducing body roll and improving steering response and stability during high-speed cornering.

• Corrects front suspension geometry on lowered vehicles
• Reduces body roll by restoring the vehicle's roll center
• High-strength construction for durability under performance driving conditions
• Direct replacement for factory front ball joints
• Sold as a pair (left and right front)
• Manufacturer Part Number: BXSS-20003

Fits select 1992-2001 Honda Civic and Acura Integra models.

Lowering your vehicle alters the factory suspension geometry, often pushing the roll center below ground level. This results in increased body roll, diminished steering response, and compromised handling. The BLOX Racing Roll Center Adjuster (Extended Ball Joint) is engineered to correct this geometry by repositioning the front control arms, bringing the roll center back toward its ideal position for improved cornering stability and steering precision.

• Manufacturer Part Number: BXSS-20001
• Function: Corrects roll center geometry on lowered vehicles to reduce body roll
• Component Type: Extended ball joint stud
• Application: Direct replacement for OE lower ball joints

By restoring the suspension's mechanical leverage, these adjusters allow the springs and shocks to work more effectively, providing a more predictable and responsive feel during spirited driving or track use.

The BLOX Racing Front OEM End Link Set (BXSS-11000) provides a direct-fit replacement for worn or damaged factory sway bar links. These components are critical for maintaining the connection between the front anti-roll bar and the control arms, ensuring your suspension geometry remains consistent and responsive during cornering.

Fits 1988-1991 Honda Prelude, 1988-2000 Honda Civic, and 1990-2001 Acura Integra.

• Restores original handling characteristics and front-end steering precision
• Direct-replacement design bolts to factory mounting points for a hassle-free installation
• Eliminates common suspension clunks and rattles caused by loose or worn ball joints
• Engineered to meet or exceed OE specifications for fit, finish, and durability
• Includes a complete pair for both the front left and right sides
• Manufacturer Part Number: BXSS-11000

Fits 2015-2021 Subaru WRX.

The BLOX Racing Sway Bar Set is designed to reduce body roll and improve the handling dynamics of the VA chassis Subaru WRX. By increasing the torsional stiffness of the suspension system, these bars help maintain a flatter contact patch during cornering, providing more predictable steering response and increased lateral grip.

This kit includes both front and rear sway bars, offering a comprehensive upgrade over the factory components. Each bar is engineered for a precise fit, utilizing standard mounting points to ensure a reliable installation for street or track applications.

• Significantly reduces chassis roll during cornering
• Improves steering precision and overall vehicle balance
• Direct replacement for OEM sway bars
• Includes both front and rear components
• Manufacturer Part Number: BXSS-10120-SET

Fits 2015-2021 Subaru WRX and WRX STI.

The BLOX Racing Rear Sway Bar is engineered to enhance the handling dynamics of the VA chassis. By increasing the torsional rigidity of the rear suspension, this 24mm upgrade effectively reduces body roll during high-speed cornering and quick transitions. This result is a more balanced vehicle with improved steering response and reduced understeer, making it an essential modification for both spirited street driving and track use.

• Diameter: 24mm
• Reduces body roll and improves lateral stability
• Designed for direct fitment on the 2015-2021 WRX/STI platform
• Manufacturer Part Number: BXSS-10120-R

Fits 1996-2000 Honda Civic models including CX, DX, EX, GX, HX, LX, Si, and Value Package.

The BLOX Racing Front Sway Bar Fixed End Link Set (BXSS-10107) is engineered to replace worn or damaged factory links, restoring the vital connection between your vehicle's sway bar and control arms. Over time, OE rubber bushings perish and link joints develop play, which causes clunking noises and decreased handling precision. These fixed-length links provide a direct-fit solution to maintain proper suspension geometry and sway bar effectiveness during cornering.

• Precision-engineered fixed-length design for factory suspension heights
• Direct replacement for original equipment (OE) end links
• Restores sway bar response and reduces body roll
• Includes all necessary mounting hardware for a straightforward installation
• Manufacturer Part Number: BXSS-10107

Vehicle Fitment:

• 1996-2000 Honda Civic CX
• 1996-2000 Honda Civic DX
• 1996-2000 Honda Civic EX
• 1998-2000 Honda Civic GX
• 1996-2000 Honda Civic HX
• 1996-2000 Honda Civic LX
• 1999-2000 Honda Civic Si
• 1999 Honda Civic Value Package

Fits 1992-2000 Honda Civic, Del Sol, and 1994-2001 Acura Integra.

The BLOX Racing Rear Sway Bar Hardware kit (BXSS-10101-HD) provides the necessary mounting components to ensure your rear stabilizer bar is securely fastened to the chassis. Over years of use, factory suspension hardware is often subject to corrosion, seizing, or fatigue; this kit serves as a reliable replacement during a suspension overhaul or when installing an upgraded aftermarket sway bar.

• Direct-fit hardware for rear stabilizer bar mounting
• Engineered for the 1992-2000 Honda Civic (EG/EK) and 1994-2001 Acura Integra (DC2) chassis
• High-quality fasteners designed to withstand suspension articulation and load
• Essential for replacing worn, rusted, or missing OE hardware
• Manufacturer Part Number: BXSS-10101-HD

Fits select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra.

Restore handling precision and eliminate suspension noise with the BLOX Racing Fixed End Link Set (BXSS-10101-EL). These fixed-length links are designed as a direct replacement for worn-out, bent, or failing factory sway bar links. By providing a solid connection between the sway bar and the control arms, these components ensure your suspension geometry remains consistent during cornering and daily driving.

• Direct bolt-on replacement for factory OE end links
• Restores sway bar effectiveness and steering response
• Durable construction designed to withstand street and track use
• Includes necessary mounting hardware for a complete installation
• Manufacturer Part Number: BXSS-10101-EL

Fits select 1992-2001 Honda Civic, Del Sol, and Acura Integra.

BLOX Racing rear sway bar bushings are designed to replace soft or deteriorated factory rubber units, providing a firmer connection between the sway bar and the chassis. By reducing unwanted lateral deflection, these bushings help maintain proper suspension geometry during hard cornering, resulting in improved steering response and more predictable handling characteristics.

• Precision-molded for a direct fit into factory mounting locations
• Durable construction resistant to oils, road salt, and environmental degradation
• Reduces compliance to provide flatter cornering and better road feel
• Includes two (2) rear sway bar bushings
• Manufacturer Part Number: BXSS-10101-BSH

Fits select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra models (including Si, GS-R, and Type R).

The BLOX Racing Adjustable End Link Set is designed to restore proper sway bar geometry on vehicles with modified ride heights. When a vehicle is lowered, the factory fixed-length end links often cause the sway bar to be preloaded, which can lead to unpredictable handling and reduced suspension travel. These adjustable links allow you to fine-tune the connection between the sway bar and the control arms, eliminating bind and ensuring the anti-roll bar performs exactly as intended.

• Precision Adjustment: Threaded bodies allow for fine-tuned length adjustments to eliminate sway bar preload.
• Durability: Engineered to withstand the increased stresses of performance driving and track use.
• Direct Fitment: Designed to replace factory end links using existing mounting points.
• Complete Set: Includes necessary hardware for a full installation.
• Manufacturer Part Number: BXSS-10101-AEL

Upgrade your vehicle's handling characteristics with the BLOX Racing Rear Sway Bar (BXSS-10101). Designed to reduce body roll and improve cornering stability, this sway bar is a vital upgrade for drivers looking to neutralize understeer and increase overall suspension responsiveness. By tying the rear suspension components together more effectively, it ensures more consistent tire contact and flatter cornering during spirited driving or track use.

Fits select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra models (including DX, EX, Si, GS-R, and Type R).

• Manufacturer Part Number: BXSS-10101
• Reduces body roll and improves chassis rigidity
• Helps correct understeer for more neutral handling
• Direct fitment for specified Honda and Acura chassis
• NOTE: Rear end links are not included and must be sourced separately

Whether you are restoring a classic 90s Honda or building an Acura Integra for the track, this BLOX Racing sway bar provides the predictable handling required for performance driving.

Fits 2015-2021 Subaru WRX and WRX STI models.

The BLOX Racing Street Series II Plus Coilovers (BXSS-03505) are designed to provide a versatile suspension solution for enthusiasts who demand a balance of daily-driven comfort and aggressive street handling. This system allows for precision tuning of your vehicle's ride height and damping characteristics, enabling a lower center of gravity and improved cornering response. As an evolution of the Street Series line, the II Plus focuses on refined valving and durable construction to maintain ride quality while significantly reducing body roll and improving high-speed stability.

• Specifically engineered for 2015-2021 Subaru WRX and WRX STI (VA chassis)
• Street Series II Plus valving for optimized street performance and comfort
• Full length height adjustability independent of spring preload
• Direct replacement for factory struts and springs
• Manufacturer Part Number: BXSS-03505

Fits 1992-2000 Honda Civic (EG/EK) and 1994-2001 Acura Integra (DC2/DC4).

The BLOX Racing Street Series II Plus Coilovers (BXSS-03115) provide a precision-engineered suspension upgrade for enthusiasts seeking a balance between daily drivability and improved handling performance. These coilovers feature adjustable ride height, allowing you to lower your vehicle's center of gravity to enhance cornering stability without sacrificing shock travel. Designed as a direct bolt-on replacement for factory struts and springs, this kit is an ideal solution for refreshing a worn suspension or tuning your chassis for spirited street use.

• Full height adjustability for customized vehicle stance
• Optimized damping for improved steering response and reduced body roll
• Durable construction engineered for the demands of street performance
• Direct fitment for EG, EK, and DC chassis platforms
• Manufacturer Part Number: BXSS-03115

Fits 2009+ Nissan 370Z and G37 RWD models.

The BLOX Racing Street Series II Coilover system is designed for enthusiasts who want to improve vehicle aesthetics and handling without the complexity of damping adjustments. This kit replaces the factory shock and spring assembly with a performance-oriented setup featuring factory-preset valving. By utilizing a fixed damping rate, these coilovers remove the guesswork from suspension tuning while providing a firm, controlled ride ideal for spirited street driving.

• Series: Street Series II
• Damping: Non-Adjustable (Factory Preset)
• Drivetrain: RWD Only
• Optimized for daily-driven street performance and lowered ride height
• Full set of front and rear coilovers
• Manufacturer Part Number: BXSS-02710

Fits 2003-2008 Nissan 350Z and G35.

The BLOX Racing Street Series II Coilover system (BXSS-02705) is engineered for enthusiasts seeking a performance-oriented suspension upgrade without the complexity of manually adjustable damping. These units are factory-valved to provide a precise balance between ride comfort and improved cornering response, making them an ideal choice for spirited daily driving and street use. By replacing the bulky factory strut and spring assembly, this kit offers a lower center of gravity and allows for customized ride-height adjustments.

• Fixed damping rates optimized for street performance and consistency
• Full ride-height adjustability for a personalized vehicle stance
• Heavy-duty construction designed to minimize body roll and improve steering feedback
• Direct replacement for OE suspension components
• Manufacturer Part Number: BXSS-02705

Fits 2006-2011 Honda Civic models.

The BLOX Racing Street Series II Coilover system is engineered to improve the handling and stance of the 8th-generation Honda Civic. This suspension kit replaces factory struts and springs with a performance-oriented setup that lowers the vehicle's center of gravity for reduced body roll and sharper cornering response. Designed for the enthusiast who wants a aggressive drop without the need for complex damping adjustments, the Street Series II features fixed valving optimized for daily driving and spirited street use.

• Fixed, non-adjustable damping tuned for street performance and comfort
• Threaded shock bodies for precise ride height adjustment
• High-quality construction for long-term durability on the street
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: BXSS-02110

Fits 2001-2005 Honda Civic and 2002-2005 Acura RSX.

The BLOX Racing Plus Series Fully Adjustable Coilover system (BXSS-00140) is designed for enthusiasts who demand precision control over their vehicle's ride height and handling characteristics. These coilovers replace the factory strut and spring assembly with a high-performance unit capable of lowering the center of gravity and reducing body roll during aggressive cornering. Whether you are daily driving or preparing for a track event, the Plus Series provides the adjustability needed to dial in your suspension settings.

• Fully adjustable ride height to achieve a custom stance without compromising stroke.
• Plus Series damping adjustment for fine-tuning suspension response.
• Durable construction designed to withstand the rigors of spirited driving.
• Direct-fit installation to factory mounting points for a straightforward upgrade.
• Manufacturer Part Number: BXSS-00140.

Fits 1992-2000 Honda Civic and 1994-2001 Acura Integra models.

The BLOX Racing Plus Series Fully Adjustable Coilover system is engineered for enthusiasts seeking a performance-oriented suspension that balances street drivability with improved handling characteristics. These coilovers provide significant ride height adjustability, allowing you to lower your vehicle’s center of gravity and eliminate unsightly wheel gap for a more aggressive stance and sharper cornering response.

Built to handle the rigors of spirited driving, the Plus Series utilizes matched spring rates and damping to optimize the suspension geometry of these classic Honda and Acura chassis. As a direct-fit upgrade, these units replace the factory strut and spring assemblies using the original mounting points, making them a primary choice for both restoration projects and performance builds.

• Manufacturer Part Number: BXSS-00110
• Fully adjustable ride height for precise chassis tuning
• Designed specifically for 1992-2000 Honda Civic and 1994-2001 Acura Integra
• Direct-fit replacement for factory suspension components
• Engineered for street performance and weekend track applications

Fits 1992-2001 Honda Civic and Acura Integra models.

The BLOX Racing Drag Pro Series rear coilover system is engineered specifically for competitive drag racing applications where managing weight transfer is critical. By utilizing an aggressive 18kg spring rate, these coilovers significantly reduce rear-end squat during hard launches. This stiffness helps front-wheel-drive platforms maintain maximum tire contact and chassis stability, leading to more consistent 60-foot times and improved track performance.

• Series: Drag Pro Series
• Position: Rear Only
• Spring Rate: 18kg (18kg/mm)
• Manufacturer Part Number: BXSS-00102-RR
• Designed to eliminate excessive rear-end squat for better launch traction

Fits 1992-2001 Honda Civic and Acura Integra (EG, EK, and DC chassis) across all major trims including Si, Type R, GS-R, and LS.

The BLOX Racing Drag Pro Series Coilover system is specifically engineered for dedicated drag racing applications where weight transfer and stability are critical. This setup utilizes high-rate springs and matched valving to minimize rear-end squat and front-end lift during hard launches, ensuring your power gets to the ground efficiently. The mono-tube design provides consistent damping performance and durability for the rigors of the track.

• Spring Rates: 12kg/mm (Front) / 18kg/mm (Rear)
• Chassis Codes: EG, EK, DC
• Application: Dedicated Drag Racing
• Construction: High-performance mono-tube
• Manufacturer Part Number: BXSS-00102

Vehicle Fitment

Maintain the performance and structural integrity of your suspension system with this genuine BLOX Racing Coilover Replacement Top Mount. Specifically designed as a direct-fit service part for BLOX Racing coilover assemblies, this top mount (BXSS-00100-TM) allows you to replace worn, damaged, or fatigued components without needing to purchase a completely new suspension kit.

This replacement mount is engineered to restore proper dampening response and eliminate unwanted suspension noise or play caused by aged mounting hardware. It ensures the coilover assembly remains securely anchored to the vehicle chassis, providing the necessary articulation and support required for both street and track environments.

• Manufacturer Part Number: BXSS-00100-TM
• Component Type: Coilover Upper Top Mount
• Direct replacement for BLOX Racing coilover systems
• Restores original suspension geometry and mounting rigidity
• Durable construction designed for high-performance use

Protect your suspension investment from the elements with BLOX Racing Coilover Covers. These red protective sleeves are designed to shield your coilover threads, shock seals, and adjustment perches from road grime, salt, mud, and debris. By preventing grit buildup, these covers ensure that your suspension remains adjustable and free of corrosion over time.

• Functional Protection: Defends against salt and road spray to prevent seized adjustment collars.
• Easy Maintenance: Keeps threads clean for quick height or preload adjustments without deep cleaning.
• Visual Appeal: Features a vibrant red finish with the BLOX Racing logo.
• Quantity: Includes one pair (2) of coilover covers.
• Manufacturer Part Number: BXSS-00100-CCR

Protect your suspension investment and maintain long-term adjustability with BLOX Racing Coilover Covers. These wraps are designed to shield your threaded shock bodies and springs from the elements, preventing the dirt, grit, and road salt buildup that often leads to seized spring perches and corroded threads.

By acting as a durable barrier, these covers also help extend the life of your shock seals by keeping abrasive debris away from the piston shaft. They are particularly essential for daily-driven vehicles and cars operated in regions where winter road salt or heavy rain are common. This pair provides a clean, black aesthetic while ensuring your height adjustments remain effortless for seasons to come.

• Shields threaded shock bodies from corrosion and road debris
• Prevents seizing of locking collars and spring perches
• Helps protect internal shock seals from abrasive grit
• Sold as a pair (Set of 2)
• Finish: Black with BLOX Racing logo
• Manufacturer Part Number: BXSS-00100-CCB

Fits select 1992-2000 Honda Civic and Civic del Sol models (1.6L SOHC VTEC).

Ensure your valvetrain remains stable under high-load conditions with BLOX Racing Valve Springs. Engineered specifically for the Honda D-series SOHC VTEC platform, these performance springs are designed to prevent valve float, a common issue when pushing higher RPMs or utilizing aggressive camshaft profiles. By providing increased seat and open pressure over factory components, these springs maintain precise valve timing and protect against potential engine damage.

• Designed for high-performance street and track applications
• Reduces harmonic vibration and prevents valve float at high RPM
• Specifically engineered for 1.6L SOHC VTEC D-series engines
• Direct replacement for worn factory springs
• Manufacturer Part Number: BXPT-20301

Vehicle Fitment

Fits 1994-2001 Acura Integra GS-R and Type R, 1999-2000 Honda Civic Si, and 1994-1997 Civic del Sol VTEC.

BLOX Racing Lost Motion Assemblies (LMAs) are engineered to replace the aging factory hydraulic-style units found in B-Series and H-Series VTEC cylinder heads. Over time, original hydraulic LMAs often lose their effectiveness, leading to the notorious "VTEC clatter" or valvetrain noise. These BLOX Racing units utilize a modern spring-type design that provides consistent tension against the high-lift rocker arm when VTEC is disengaged, preventing rocker float and ensuring valvetrain stability at high RPM.

• Eliminates valvetrain noise and ticking common in high-mileage VTEC heads
• Spring-type design offers superior durability over OEM hydraulic pistons
• Ensures proper rocker arm alignment and contact during high-RPM operation
• Critical upgrade for performance camshaft installations and cylinder head rebuilds
• Direct replacement for factory Honda/Acura components
• Manufacturer Part Number: BXPT-11300

The BLOX Racing BXPT-10515 Lower Timing Chain Guide is a critical reliability upgrade for high-performance Honda and Acura K-Series engines. This guide is specifically engineered to secure the timing chain and prevent it from jumping or skipping teeth on the crankshaft sprocket—a common failure point during rapid deceleration or in the event of a timing chain tensioner failure.

• Prevents timing chain skipping on the crank sprocket during high-RPM operation.
• Compatible with Honda/Acura K20 and K24 engine platforms.
• Precision CNC-machined from high-grade aluminum for durability and exact fitment.
• Essential for builds utilizing aggressive aftermarket camshafts or high-lift valve springs.
• Direct bolt-on installation using factory mounting locations.
• Manufacturer Part Number: BXPT-10515.

By maintaining proper chain alignment even under extreme stress, this guide provides an additional layer of security for your valvetrain, helping to prevent catastrophic engine damage caused by timing synchronization issues.