Fits the 2014 Land Rover Discovery IV (3.0L). Please note that this vehicle requires two (2) filters for a complete replacement.

The BMC FB748/20 is a high-performance drop-in panel air filter designed to replace the restrictive factory paper element. Engineered for increased airflow without compromising filtration efficiency, this filter allows your engine to breathe more freely, supporting better throttle response and consistent power delivery. Built with a specialized multi-layer cotton gauze soaked in low-viscosity oil, it captures impurities as small as 7 microns to protect internal engine components from wear.

• Precision Engineering: Features a one-piece molded polyurethane frame (the iconic BMC Red) to ensure a perfect airtight seal within the factory airbox.
• Durable Construction: Reinforced with epoxy-coated alloy mesh to maintain structural integrity under high intake pressure and resist petrol fumes and oxidation.
• Sustainability: Fully washable and reusable using BMC cleaning kits, eliminating the need for frequent disposable filter changes.
• Direct OE Replacement: Designed for an exact fit into the original equipment housing with no modifications required.
• Manufacturer Part Number: FB748/20

Fits the 2016 McLaren 540 (3.8L).

Optimize your supercar's intake system with the BMC Replacement Cylindrical Air Filter Full Kit. This high-performance filtration solution replaces the restrictive factory paper elements with a high-flow design engineered to improve engine breathing without compromising filtration efficiency. These filters are built to exacting standards, utilizing a multi-layered cotton gauze media soaked in low-viscosity oil to capture even the smallest impurities while maintaining consistent airflow.

Constructed with an epoxy-coated alloy mesh, the filter structure is resistant to petrol fumes and oxidation, ensuring long-term durability in high-heat engine bay environments. This BMC kit is a direct-fit solution that installs into the factory airbox housing, providing a technical upgrade for owners seeking better throttle response and reusable components.

• Part Number: FB742/08
• Direct replacement for OEM cylindrical air filters
• Multi-layer cotton gauze filtration media for increased airflow
• Epoxy-coated alloy mesh protection against oxidation and fuel vapors
• Washable and reusable design for extended service life
• Full kit includes all filters required for a complete installation

Fits 2013+ Alpina B3 (F30/F31) models equipped with the 3.0 Biturbo engine.

This BMC replacement panel air filter (FB740/20) is a high-performance drop-in upgrade designed to optimize airflow into your engine. Engineered as a direct replacement for the restrictive factory paper element, BMC filters utilize precision-molded frames and specialized filtration media to improve intake efficiency while maintaining high levels of engine protection.

• Direct drop-in replacement for the OEM air box
• Designed for improved airflow and filtration performance
• Durable construction with continuous rubber molding to prevent bypass
• Manufacturer Part Number: FB740/20

Fits 2014+ Mercedes-Benz M-Class (W166) ML300 models.

The BMC FB720/01 Replacement Panel Air Filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. Built to withstand the demands of both daily driving and performance use, this filter improves airflow to the engine while maintaining a high filtration efficiency for superior protection against airborne contaminants.

• Precision Engineering: Constructed using a proprietary full-molding process that creates the characteristic red filter from a single mold, ensuring durability and a perfect seal within the factory airbox.
• High-Flow Media: Utilizes multi-layered cotton gauze soaked in low-viscosity oil, reinforced by an epoxy-coated alloy mesh to prevent oxidation and maintain structural integrity under high intake pressure.
• Washable and Reusable: Unlike disposable OE filters, the BMC FB720/01 can be cleaned and regenerated using a BMC care kit, lasting the lifetime of the vehicle.
• Direct OE Replacement: Designed for an exact fit without any modifications to the vehicle's intake system.
• Part Number: FB720/01

Fits 2010-2015 Audi A6 (4G2, 4G5, 4GC, and 4GD) models equipped with the 2.8 FSI engine.

The BMC FB693/08 is a high-performance cylindrical air filter designed to replace the restrictive factory paper element. BMC filters are engineered to provide increased airflow to the intake system, supporting better engine efficiency and throttle response. This filter uses a multi-layered cotton gauze media soaked with low-viscosity oil, trapped between epoxy-coated alloy meshes to ensure high filtration standards without sacrificing permeability.

• Direct-fit replacement for the original equipment cylindrical filter
• Washable and reusable media for an extended service life
• Full polyurethane molded frame for a precise, airtight seal in the OE airbox
• Engineered and manufactured by BMC in Italy
• Manufacturer Part Number: FB693/08

Fits 2009+ BMW X5 M (E70) models equipped with the 4.4L V8 engine.

This BMC replacement panel air filter kit (FB654/20) is a high-performance drop-in upgrade for the factory intake system. Engineered for the BMW X5 M's twin-turbocharged V8, these filters utilize a multi-layered cotton gauze media soaked in low-viscosity oil to capture contaminants without restrictive pressure drops. The filtration media is protected by an epoxy-coated alloy mesh, ensuring structural integrity and resistance to fuel vapors and oxidation.

• Direct replacement for OEM air filters with no modifications required
• Washable and reusable for extended service life
• Epoxy-coated alloy mesh construction resists oxidation
• Multi-layered oil-soaked cotton gauze for maximum airflow
• Manufacturer Part Number: FB654/20
• Full kit includes all necessary filter panels for the V8 intake

Fits 2011+ BMW 5 Series ActiveHybrid (F10, F11, and F18) models.

The BMC FB651/20 replacement panel air filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper filter. Engineered to provide significantly higher airflow while maintaining 98.5% filtration efficiency, this filter allows your engine to breathe more freely for optimized induction performance. Unlike disposable filters, BMC units are washable and reusable, providing a lifetime of service with proper maintenance.

Each filter is constructed using a specialized multi-layered cotton gauze soaked in low-viscosity oil, sandwiched between epoxy-coated alloy meshes. This construction ensures structural integrity against moisture and fuel vapors. The filter is finished with a continuous polyurethane molding process that prevents breakage and ensures a precise, leak-free seal within the factory airbox.

• Manufacturer Part Number: FB651/20
• Direct drop-in replacement for the OEM air filter
• Multi-layered cotton gauze media for increased airflow and protection
• Epoxy-coated alloy mesh prevents oxidation and fuel vapor damage
• Washable and rechargeable for long-term use
• Precision-molded polyurethane frame for an airtight fit

Fits 2010+ Alpina B3 III (3.0L).

The BMC FB630/20 replacement panel air filter is a high-performance upgrade designed to optimize airflow into your engine while maintaining superior filtration. Unlike standard disposable paper filters, this multi-layer cotton gauze media is washable and reusable, providing a lifetime of service with proper maintenance. The filter media is treated with a low-viscosity oil to capture contaminants as small as 7 microns, ensuring your engine receives clean air without the restrictive pressure drop common with OEM elements.

• Direct replacement for the factory panel filter in the OEM airbox
• Constructed with a molded polyurethane frame for a leak-free seal and structural integrity
• Epoxy-coated alloy mesh protects the filter media from debris and fuel vapors
• Pre-oiled and ready to install out of the box
• Designed and manufactured in Italy for precision fitment
• Manufacturer Part Number: FB630/20

Optimize your engine's intake efficiency with the BMC FB614/01 Replacement Panel Air Filter, specifically engineered for the 2010 Ferrari 458 Challenge. Designed as a direct drop-in replacement for the restrictive factory paper filter, this high-performance component provides significantly increased airflow while maintaining the high-level filtration necessary to protect internal engine components.

• Direct replacement for the OEM air filter in the 2010 Ferrari 458 Challenge
• Constructed with multi-layered cotton gauze soaked in low-viscosity oil for maximum air permeability
• Epoxy-coated alloy mesh protects the filter structure against fuel vapors and oxidation
• One-piece "Full Moulding" design ensures structural integrity without welded joints that can break
• Washable and reusable, allowing for extended service life through regular cleaning
• Manufacturer Part Number: FB614/01

Fits 2004-2008 Aston Martin DB9 (6.0L V12).

This BMC replacement air filter kit is designed as a high-performance alternative to the factory paper elements. Featuring a multi-layered cotton gauze media treated with low-viscosity oil, these cylindrical filters provide superior filtration efficiency and increased airflow to the 6.0L V12 engine. The filter material is housed in an epoxy-coated alloy mesh, ensuring structural integrity and resistance against fuel vapors and oxidation.

• Direct drop-in replacement for OEM cylindrical air filters
• Washable and reusable media for long-term service life
• Full kit includes both filters required for the DB9 intake system
• Increased surface area for improved induction efficiency
• Manufacturer Part Number: FB590/08

Fits the 2011 Porsche Panamera (3.0 D).

The BMC replacement panel air filter (FB582/20) is a high-performance drop-in solution designed to replace the original paper element in your factory air box. Engineered for durability and optimized airflow, this filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities while significantly reducing intake restriction compared to OEM filters.

Constructed with an epoxy-coated alloy mesh, the filter media is protected from petrol fumes and oxidation, ensuring long-term structural integrity. This filter is fully washable and reusable, offering a sustainable alternative to disposable paper filters while maintaining high filtration efficiency for engine protection.

• Direct fit for factory air box
• High-flow cotton gauze filtration media
• Washable and reusable design
• Epoxy-coated alloy mesh protection
• Manufacturer Part Number: FB582/20

Fits 2007-2009 BMW M3 models (E90 Sedan, E91 Touring, E92 Coupe, and E93 Convertible) equipped with the 4.0L V8 engine.

The BMC FB577/08 is a high-performance drop-in replacement cylindrical air filter designed to fit directly into the factory airbox of the E9X M3. This filter features an integrated supporting frame that ensures structural integrity and a precise seal within the intake housing, preventing unfiltered air bypass. Unlike standard disposable paper filters, BMC filters utilize a multi-layered cotton gauze media treated with low-viscosity oil and protected by an epoxy-coated alloy mesh for superior airflow and filtration efficiency.

• Direct replacement for OE part numbers; part number FB577/08
• Cylindrical design with integrated molded frame for stability
• Increased surface area for improved airflow over factory paper filters
• Washable and reusable filter media for extended service life
• Specifically engineered for the BMW S65 V8 intake requirements

Fits 2008-2013 Porsche 911 (997) 3.6 Carrera models.

This BMC high-performance air filter kit (FB550/08) is a direct replacement for the factory cylindrical filters, engineered to increase airflow while providing superior engine protection. Using a multi-layered cotton gauze saturated with low-viscosity oil, these filters capture impurities as small as 7 microns—a significant improvement over the 10-micron filtration standard of OEM paper filters. The filter media is supported by an epoxy-coated alloy mesh, ensuring resistance to fuel fumes and oxidation in high-humidity environments.

Built for durability, BMC filters feature a proprietary single-mold design. This eliminates the welded joints common in other aftermarket filters, preventing potential failure points and ensuring structural integrity under high vacuum. These filters are fully washable and can be restored to peak performance using a BMC regeneration kit.

• MPN: FB550/08
• Filtration Rating: 7 microns
• Construction: Single-mold design with multi-layer oiled cotton gauze
• Height: 171mm
• Outside Length / Base OD: 163mm
• Outside Width / Base ID: 122mm
• Maintenance: Washable and regenerable
• Warranty: 2 Years Limited

Fits 2010-2024 Maserati GranCabrio models equipped with the 4.7L V8 engine and automatic transmission.

This BMC performance panel air filter is a high-flow, direct-fit replacement for the restrictive factory paper element. Engineered for enthusiasts who demand better throttle response and filtration efficiency, it utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to trap impurities as small as 7 microns. The filter is constructed using BMC's "Full Moulding" process, creating a single-piece rubber frame without welded joints for maximum durability and a perfect seal against the OEM airbox.

• High-Flow Filtration: Increases air intake volume compared to standard paper filters while maintaining superior engine protection.
• Robust Build: Features an epoxy-coated alloy mesh to resist fuel vapors and oxidation in harsh under-hood environments.
• Sustainable Performance: Fully washable and reusable, designed to last the life of the vehicle with proper maintenance.
• Direct Fitment: Installs into the factory airbox with no modifications required, maintaining original engine bay aesthetics.
• Manufacturer Part Number: FB546/20

Fits 2008-2010 Lancia Delta III (844) models equipped with the 1.4T engine.

The BMC FB543/08 is a high-performance replacement panel air filter designed to drop directly into your vehicle's factory airbox. Constructed from multi-layered cotton gauze soaked in low-viscosity oil, this filter provides superior filtration efficiency and increased airflow over restrictive original equipment paper filters. This design helps minimize pressure drop across the intake system, allowing for improved engine responsiveness.

• Manufacturer Part Number: FB543/08
• Direct Fit: Replaces the OEM air filter with no modifications required to the airbox.
• Construction: Multi-layer cotton media protected by an epoxide-coated alloy mesh for structural integrity and corrosion resistance.
• Maintenance: Fully washable and reusable, eliminating the need for periodic filter replacement.
• Sealing: Precision-molded rubber frame ensures a tight, leak-free seal within the intake housing.

Fits the 2010 BMW M3 (E90/E91/E92/E93) equipped with the V8 engine.

The BMC FB536/08 replacement cylindrical air filter is engineered to provide a higher volume of airflow compared to restrictive factory paper filters. This performance intake solution utilizes multi-layered cotton gauze soaked in low-viscosity oil to capture impurities down to 7 microns, ensuring the S65 engine receives clean, high-velocity air for optimal combustion.

Constructed using BMC's "Full Moulding" process, this filter features a single-piece rubber frame that eliminates welding joints, preventing air bypass and ensuring long-term structural integrity. The filter media is reinforced by an epoxy-coated alloy mesh to resist fuel fumes and oxidation under high induction pressures. This unit is fully washable and reusable with a BMC regeneration kit.

• Manufacturer Part Number: FB536/08
• Filter Type: Cylindrical with integrated frame
• Media: Multi-layer oiled cotton gauze
• Reinforcement: Epoxy-coated alloy mesh
• Installation: Direct drop-in replacement for OE filter housing

Fits 2008-2009 Alpina B3 III models equipped with the 3.0L Biturbo engine.

This BMC high-performance replacement panel air filter is engineered to provide increased airflow over the standard factory paper element. By utilizing a multi-layered cotton filtration media treated with a low-viscosity oil, it captures impurities without significantly restricting the intake path, improving engine efficiency and throttle response. The filter is housed in a precision-molded polyurethane frame that ensures a tight, leak-free seal within the factory airbox.

• Direct drop-in replacement for the original equipment (OE) filter
• Washable and reusable design for a lifetime of service
• Multi-layer cotton gauze media provides superior filtration and flow
• Epoxy-coated alloy mesh protects the filter media from oxidation and fuel vapors
• Manufacturer Part Number: FB494/20

Fits 2007-2012 Ferrari 599 GTB Fiorano and 2022-present Ferrari Purosangue.

The BMC FB487/20 high-performance air filter kit is designed to replace the restrictive factory paper filters in your Ferrari's intake system. This kit provides a significant increase in airflow while maintaining high filtration efficiency to protect the engine from contaminants as small as 7 microns. By utilizing a multi-layered cotton gauze media soaked in low-viscosity oil, these filters allow for a more consistent air delivery to the V12 engine.

Engineered for durability and performance, BMC filters utilize a proprietary "Full Moulding" system that creates the characteristic red filter from a single mold with no welded joints, preventing breakage or deformation. The filtering material is supported by an epoxy-coated alloy mesh, ensuring resistance to fuel vapors and oxidation in high-heat engine environments.

• Direct drop-in replacement for factory airboxes; no modifications required
• Washable and reusable using BMC cleaning and regeneration kits
• Increased airflow helps optimize combustion and engine responsiveness
• Multi-layer cotton filtration media captures particles down to 7 microns
• Manufacturer Part Number: FB487/20

Fits 2007-2009 Porsche 911 (997) 3.6 GT2 models.

The BMC FB473/04 is a high-performance replacement panel air filter engineered to optimize induction efficiency for the Porsche 997 GT2. This drop-in filter replaces the factory paper element, utilizing a multi-layered cotton gauze media treated with low-viscosity oil to improve airflow while maintaining strict filtration standards. Unlike standard disposable filters, this unit is designed for longevity and consistent performance under high-load conditions.

• Direct OE replacement for the factory airbox, ensuring a precise fit and seal.
• Features multi-layered cotton filtration media protected by epoxy-coated alloy mesh.
• One-piece molded red polyurethane frame provides structural integrity and prevents bypass leaks.
• Washable and reusable design offers a long-term service life.
• Manufacturer Part Number: FB473/04

This BMC Replacement Panel Air Filter Full Kit (MPN: FB471/20) provides high-performance filtration and increased airflow for the 2005-2013 Bentley Continental Flying Spur. Designed as a direct drop-in replacement for restrictive factory paper elements, these filters improve engine efficiency and response without requiring modifications to the original intake housing.

BMC filters are engineered using a proprietary "Full Moulding" process, creating a single-piece frame that eliminates joints and prevents breakage. The filter media is composed of multi-layered cotton gauze soaked in low-viscosity oil, reinforced by an epoxy-coated alloy mesh to ensure structural integrity and protection against fuel vapors and oxidation.

• Fits 2005-2013 Bentley Continental Flying Spur models
• Full Kit: Includes all necessary panel filters for a complete replacement
• High-flow cotton gauze media for improved intake performance
• Washable and reusable for extended service life
• Direct fit into the OE airbox
• Manufacturer Part Number: FB471/20

Fits 2006-2008 Porsche 911 (997) Carrera S (3.8L).

The BMC FB468/20 is a high-performance replacement panel air filter kit engineered to provide superior airflow and filtration efficiency compared to standard paper filters. Utilizing a multi-layer cotton filtration media soaked with low-viscosity oil, this kit captures impurities while minimizing pressure drop across the intake system. The filter is housed in an epoxy-coated alloy mesh to ensure structural integrity and resistance to fuel vapors and oxidation.

• Direct replacement for the factory air filter (MPN: FB468/20)
• Constructed with a precise molded rubber seal for a leak-proof fitment in the OE housing
• Washable and reusable design for extended service life
• Optimized specifically for the Porsche 911 (997) 3.8L Carrera S engine
• Includes all necessary components for a full kit installation

Fits 2004-2010 BMW M5 (E60 Sedan/E61 Touring) models equipped with the S85 V10 engine.

This BMC Replacement Panel Air Filter kit is engineered to provide superior airflow and filtration compared to standard factory paper filters. Designed as a direct drop-in replacement for the dual airboxes on the BMW V10, these filters utilize a multi-layer cotton gauze media soaked in low-viscosity oil, encapsulated by an epoxy-coated alloy mesh. This construction allows for a higher volume of air to reach the intake tract while maintaining strict filtration standards to protect the S85 engine.

• Direct replacement for OE part numbers, fitting the factory airbox without modification
• Washable and reusable design for an extended service life
• Polyurethane frame molded in a single piece to prevent breakage and ensure a perfect seal
• Optimized for the high-revving induction requirements of the BMW 5.0L V10
• Full kit includes two (2) panel filters (left and right banks)

Manufacturer Part Number: FB447/01

Fits 2004-2009 Ferrari F430 (4.3L).

The BMC FB443/03 air filter kit is a high-performance replacement for the restrictive factory paper elements in your Ferrari F430. Engineered to improve airflow while maintaining rigorous filtration standards, this kit utilizes a multi-layered cotton gauze media soaked in low-viscosity oil. This design allows for a higher volume of air to reach the 4.3L V8 engine compared to standard filters, ensuring impurities as small as 7 microns are captured to protect internal components.

• Direct replacement for OEM panel filters, fitting into the factory airbox without modification
• Full kit configuration ensures complete coverage for both intake tracts
• Constructed from high-durability epoxy-coated alloy mesh for structural integrity
• Washable and reusable design for long-term service life
• Manufacturer Part Number: FB443/03

Fits 2004-2006 Porsche Boxster and Boxster S models (2.7L).

The BMC FB416/16 replacement cylindrical air filter is engineered to provide superior airflow and filtration efficiency over standard paper elements. Using a multi-layered cotton gauze media soaked in low-viscosity oil, this filter captures impurities as small as 7 microns—significantly finer than the 10-micron threshold of most OEM filters. The media is reinforced with an epoxy-coated alloy mesh to resist oxidation and protect against petrol fumes in the intake tract.

Built for durability and performance, BMC utilizes a single-mold manufacturing process that eliminates welded joints, removing common points of structural failure. This filter arrives pre-oiled and is fully washable and regenerable, allowing for a long service life with regular maintenance. This is a direct-fit replacement for the factory air box.

• Manufacturer Part Number: FB416/16
• Filtration: 7 microns
• Outside Length / Base Outer Diameter: 197mm
• Outside Width / Base Inner Diameter: 87mm
• Height: 306mm
• Construction: Multi-layer cotton gauze with epoxy-coated alloy mesh
• Warranty: 2-Year Limited

Fits 1990-2001 Lamborghini Diablo models (including 6.0 VT).

The BMC FB414/01 Replacement Panel Air Filter kit is a precision-engineered upgrade designed to replace the restrictive factory paper filters in your Diablo. This full kit includes two high-flow filters, providing a complete service solution for the Lamborghini V12 intake system. Built with a multi-layer cotton gauze media and housed in a durable epoxy-coated alloy mesh, these filters are designed to maximize airflow while maintaining rigorous filtration standards for engine protection.

• Direct drop-in replacement for OEM airbox filters
• Complete kit includes two (2) high-performance panel filters
• High-flow cotton gauze media optimizes intake efficiency
• Washable and reusable design for long-term durability
• Manufacturer Part Number: FB414/01

Fits 2004-2010 Volvo S60 (2.4L T5 20V).

The BMC FB358/16 replacement air filter is a high-performance cylindrical drop-in unit designed to replace the restrictive factory paper element. Engineered with multi-layer cotton gauze soaked in low-viscosity oil, this filter provides increased airflow to the intake system while maintaining superior filtration efficiency to protect internal engine components from debris and contaminants.

• Increased Airflow: Optimizes oxygen delivery for more efficient combustion and improved throttle response compared to standard paper filters.
• Premium Construction: Utilizes an epoxy-coated alloy mesh to provide structural integrity and resistance against fuel vapors and moisture-induced oxidation.
• Washable and Reusable: Designed for a long service life; the filter can be cleaned and re-oiled using a BMC regeneration kit to maintain peak performance.
• Precision Fit: Molded to exact dimensions for a seamless drop-in installation into the factory Volvo airbox.
• Manufacturer Part Number: FB358/16

Fits 2010-2015 Audi Q7 (4L) models equipped with the 3.0 TFSI engine.

The BMC FB335/01 is a high-performance replacement panel air filter designed to improve airflow and filtration efficiency over standard OEM paper filters. Constructed using a multi-layer cotton gauze media soaked in a low-viscosity oil, this filter captures impurities down to 7 microns without restricting the air intake path. The filter material is housed in an epoxy-coated alloy mesh to ensure structural integrity under high-vacuum conditions, and the one-piece molding process ensures a perfect seal within the factory airbox.

• Direct drop-in replacement for the factory air filter
• Multi-layer cotton filtration media provides superior airflow
• Washable and reusable for extended service life
• Durable epoxy-coated alloy mesh prevents deformation
• Fulfills international standards for air filtration (ISO 5011)
• Manufacturer Part Number: FB335/01

Fits select 2004-2008 Alpina B7 and 2024+ Aston Martin DB12 and Vantage (4.4L).

The BMC FB305/01 Replacement Panel Air Filter is a high-performance engine air filter designed to replace the restrictive factory paper element. Engineered for increased induction efficiency, this filter utilizes multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns while significantly improving airflow to the engine.

• Manufacturer Part Number: FB305/01
• High-flow cotton gauze media for improved throttle response
• Epoxy-coated alloy mesh protects against fuel vapors and oxidation
• Washable and reusable design for extended service life
• Precision-molded for a perfect seal within the factory airbox
• Designed and manufactured in Italy to racing standards

By optimizing the air-to-fuel ratio through better breathing, BMC filters help maintain consistent power output. This direct-fit panel filter requires no modifications and is an essential upgrade for owners looking to maintain their vehicle's performance with a durable, washable solution.

Fits 1999-2010 Fiat Punto II (188/188AX) models equipped with the 1.2L 16V engine, including ELX and HLX trims.

This BMC high-performance replacement air filter is designed as a direct-fit upgrade for the factory paper element. Engineered to increase airflow while maintaining maximum filtration efficiency, this panel filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil. This construction allows for higher air volume to reach the combustion chamber compared to standard filters, improving engine responsiveness and efficiency.

The filter features a durable epoxy-coated alloy mesh that protects the filtration media from fuel vapors and oxidation. Unlike many competitors, BMC filters use a "Full Moulding" process, creating the entire filter frame from a single piece of flexible polyurethane. This method eliminates welded joints, preventing potential failure or air bypass under high-stress conditions.

• Manufacturer Part Number: FB224/01
• Construction: One-piece "Full Moulding" polyurethane frame
• Media: Multi-layered oiled cotton gauze
• Hardware: Not required; drops directly into OEM airbox
• Maintenance: Fully washable and reusable for the life of the vehicle

Fits 2000-2005 Ferrari 360 Spider. This full kit includes both high-performance panel air filters required for a complete air intake service.

Engineered by BMC to replace restrictive factory paper elements, these panel filters (MPN FB208/03) utilize a multi-layered cotton gauze media soaked in low-viscosity oil. This specific construction allows for significantly higher airflow compared to standard filters while maintaining the filtration efficiency necessary to protect your Ferrari's V8 engine from airborne contaminants. The filters feature an epoxy-coated alloy mesh for structural integrity and a full-molded rubber frame to ensure a perfect, airtight seal within the OEM airbox.

• Direct drop-in replacement for factory filters; no modifications or trimming required.
• Washable and reusable media maintains peak performance throughout the life of the vehicle.
• Constructed from a single-piece molded frame to prevent breakage or leaks.
• Full kit contains two (2) replacement panel filters for a complete install.
• Manufacturer Part Number: FB208/03