Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
722 products
722 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Chevrolet | Tahoe | High Country |
| 2022-2026 | Chevrolet | Tahoe | Premier |
| 2022-2026 | Chevrolet | Tahoe | RST |
| 2022-2026 | Chevrolet | Tahoe | Z71 |
| 2022-2026 | GMC | Yukon | AT4 |
| 2021-2026 | GMC | Yukon | Denali |
| 2023-2026 | GMC | Yukon | Denali Ultimate |
Fits models with Quad Tips (2 tips each side) ONLY. This 3" into dual 2.75" diameter BORLA® Cat-Back™ system was specifically designed to enhance the power and sound of the Chevrolet Tahoe equipped with the 5.3L engine. This system features the popular S-Type sound level with no drone inside the vehicle. Split rear exit with dual 4" round black chrome on T-304 stainless steel tips on each side provide a custom appearance for your Tahoe. Using BORLA® Stainless Steel Polish p# 21461 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. Systems with bright chrome on T-304 stainless steel tips, and carbon fiber tips are also available. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA® Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA® stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
- Fits models with Quad Tips (2 tips each side) ONLY
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Chevrolet | Tahoe | Premier |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Chevrolet | Tahoe | LS |
| 2021-2025 | Chevrolet | Tahoe | LT |
| 2021-2025 | Chevrolet | Tahoe | RST |
| 2021-2025 | Chevrolet | Tahoe | Z71 |
| 2021-2025 | GMC | Yukon | AT4 |
| 2021-2024 | GMC | Yukon | SLE |
| 2021-2024 | GMC | Yukon | SLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Chevrolet | Tahoe | LS |
| 2021-2025 | Chevrolet | Tahoe | LT |
| 2021-2025 | Chevrolet | Tahoe | RST |
| 2021-2025 | Chevrolet | Tahoe | Z71 |
| 2021-2025 | GMC | Yukon | AT4 |
| 2021-2024 | GMC | Yukon | SLE |
| 2021-2024 | GMC | Yukon | SLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2024 | Toyota | Camry | XSE |
This 3.5" diameter BORLA Cat-Back system utilizes the factory transition pipe between the catalytic converters and the muffler so that it will fit ALL Cab and Bed configurations. EXCEPT vehicles with Dual Rear Wheels. The system is made to give you the best performance, sound and durability possible. It utilizes high quality T-304 stainless steel, superior to T-409, for durability, mandrel bent pipes for high flow, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. The uniquely designed muffler provides the classic BORLA S-Type sound without drone. This system comes with a 5" round black chrome on T-304 stainless steel tip. Using BORLA Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. A system with bright chrome on T-304 stainless steel is also available. And as you would expect it is covered by the BORLA Million Mile Warranty. Give your Ram the power and sound it deserves, bolt on a BORLA®.
- EXCEPT vehicles With Dual Rear Wheels
- Fits ALL Cab & Bed configurations
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2019 | Ram | 2500 | Power Wagon |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
This 3.5" diameter BORLA system utilizes the factory transition pipe between the cats and the muffler so that it will fit ALL Cab and Bed configurations. EXCEPT vehicles with Dual Rear Wheels. The 140851 Cat-Back system by BORLA is made to give you the best performance, sound and durability possible. It utilizes high quality T-304 stainless steel, superior to T-409, for durability, mandrel bent pipes for high flow, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. The uniquely designed muffler provides the classic BORLA S-Type sound without drone. This system comes with a 5"round bright chrome on T-304 stainless steel tip. A system with black chrome on T-304 stainless steel is also available. And as you would expect it is covered by the BORLA Million Mile Warranty. Give your Ram the power and sound it deserves, bolt on a BORLA®.
- EXCEPT vehicles with Dual Rear Wheels
- Fits ALL Cab & Bed configurations
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2019 | Ram | 2500 | Power Wagon |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
BORLA® presents their Cat-Back™ exhaust system for the MK7 Volkswagen Jetta GLI. Our exhaust system is specifically tuned for the 2.0L engine of the MK7 Jetta GLI. The S-Type sound level delivers an improved exhaust note and a sporty sound that is fitting for Volkswagen's turbocharged sedan. In order to maintain a comfortable driving experience, we guarantee our exhaust system to be drone-free. T-304 stainless steel construction provides additional durability over the stock exhaust. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Brushed 3.5" T-304 stainless steel tips with laser etched BORLA® logo provide the finishing touch to the system. Choose how you want to be heard and bolt on a BORLA®. All BORLA® Cat-Back™ and Axle-Back systems are made in the USA and are covered by our Million-Mile warranty.
- BORLA® system is 3" into dual 2.25" tailpipes
- Tips have laser etched BORLA® logo
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | Volkswagen | Jetta | GLI 35th Anniversary Edition |
| 2019-2021 | Volkswagen | Jetta | GLI Autobahn |
| 2019-2021 | Volkswagen | Jetta | GLI S |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Toyota | Corolla | SE |
| 2020-2025 | Toyota | Corolla | XSE |
EXCEPT Vehicles with Dual Rear Wheels. This dual 2.75" diameter into single 3" diameter Cat-Back™ system was developed for use on F-250 and F-350 Super Duty (Including Tremor Models) trucks with performance, sound, style and durability in mind. The muffler is specifically designed to give the 6.8L and 7.3L engines the classic S-Type sound without any drone. This system can be adapted to the different wheel bases offered by Ford. 140843BC comes with the front extension pipe for the Crew Cab with Short Bed (6' 9") 160" Wheelbase configuration. By removing the front extension pipe it will fit the Regular Cab with Long Bed (8') 142" Wheelbase. Add 60691 for Extended (Super) Cab with Short Bed (6' 9") 148" Wheelbase, 60692 for Extended (Super) Cab with Long Bed (8') 164" Wheelbase, or 60693 for Crew Cab with Long Bed (8') 176" Wheelbase vehicles. This system features a 5" round black chrome on T-304 stainless steel tip. Using BORLA® Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. A system with a bright chrome on T-304 stainless steel tip is also available. BORLA® Cat-Back™ & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA® Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA® stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
- Remove Front Extension Pipe for Regular Cab With Standard Bed (8') 142")WB
- EXCEPT Vehicles with Dual Rear Wheels
- 60691 for Extended Cab(6' 8") 148" WB
- 60692 for Extended Cab(8') 164" WB
- 60693 for Crew Cab(8') 176" WB
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Ford | F-250 Super Duty | King Ranch |
| 2020-2025 | Ford | F-250 Super Duty | Lariat |
| 2020-2025 | Ford | F-250 Super Duty | Platinum |
| 2020-2025 | Ford | F-250 Super Duty | XL |
| 2020-2025 | Ford | F-250 Super Duty | XLT |
| 2020-2025 | Ford | F-350 Super Duty | King Ranch |
| 2020-2025 | Ford | F-350 Super Duty | Lariat |
| 2020-2025 | Ford | F-350 Super Duty | Platinum |
| 2020-2025 | Ford | F-350 Super Duty | XL |
| 2020-2025 | Ford | F-350 Super Duty | XLT |
EXCEPT Vehicles with Dual Rear Wheels. This dual 2.75" diameter into single 3" Cat-Back™ system was developed for use on F-250 and F-350 Super Duty (Including Tremor Models) trucks with performance, sound, style and durability in mind. The muffler is specifically designed to give the 6.8L and 7.3L engines the classic S-Type sound without any drone. This system can be adapted to the different wheelbases offered by Ford. 140843 comes with the front extension pipe for the Crew Cab with Short Bed (6' 9") 160" Wheelbase configuration. By removing the front extension pipe it will fit the Regular Cab with Long Bed (8') 142" Wheelbase. Add 60691 for Extended (Super) Cab with Short Bed (6' 9") 148" Wheelbase, 60692 for Extended (Super) Cab with Long Bed (8') 164" Wheelbase, or 60693 for Crew Cab with Long Bed (8') 176" Wheelbase vehicles. This system features a 5" round bright chrome on T-304 stainless steel tip. A system with a 5" black chrome on T-304 stainless steel tip is also available. BORLA® Cat-Back™ & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA® Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA® stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
- S-Type Cat-Back™ Exhaust System
- 5 in. Round Rolled Angle Cut Tip
- 2.75 in./3.5 in. Pipe
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Ford | F-250 Super Duty | King Ranch |
| 2020-2025 | Ford | F-250 Super Duty | Lariat |
| 2020-2025 | Ford | F-250 Super Duty | Platinum |
| 2020-2025 | Ford | F-250 Super Duty | XL |
| 2020-2025 | Ford | F-250 Super Duty | XLT |
| 2020-2025 | Ford | F-350 Super Duty | King Ranch |
| 2020-2025 | Ford | F-350 Super Duty | Lariat |
| 2020-2025 | Ford | F-350 Super Duty | Platinum |
| 2020-2025 | Ford | F-350 Super Duty | XL |
| 2020-2025 | Ford | F-350 Super Duty | XLT |
Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes AFM ('20-'21)/ DFM ('22-'25) valves but does NOT include NPP dual mode exhaust valves. It features the aggressive ATAK® sound. It provides a more exciting driving experience without any drone. It contains our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 per side) 4" round black chrome on T-304 stainless steel tips. Systems are also available with bright chrome on T-304 stainless steel tips, or carbon fiber tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM/ DFM valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service.
- Includes AFM ('20-'21)/ DFM ('22-'25) Valves. System does NOT includes NPP Valves.
- Valve actuator recalibration REQUIRED after installation (Click for details)
- System contains Polyphonic Harmonizer and SwitchFire® Technology
- System ships in 2 boxes
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray |
Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet system includes AFM ('20-'21)/ DFM ('22-'25) valves but does NOT include NPP dual mode exhaust valves. The S-Type sound level delivers a powerful, yet balanced sound with a deep tone. It provides a more exciting driving experience without any drone. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 each side) 4" round black chrome on T-304 stainless steel tips. Systems are also available with bright chrome on T-304 stainless steel tips, or carbon fiber tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM/ DFM valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service.
- Includes AFM ('20-'21)/ DFM ('22-'25) Valves. System does NOT includes NPP Valves.
- Valve actuator recalibration REQUIRED after installation (Click for details)
- System contains Polyphonic Harmonizer and SwitchFire® Technology
- System ships in 2 boxes
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray |
2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) valves and NPP dual mode exhaust valves. It features the aggressive ATAK® sound for an exciting driving experience with no drone inside the vehicle. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 each side) 4" round carbon fiber tips with bright centers. Systems are also available with bright chrome on T-304 stainless steel tips, or black chrome on T-304 stainless steel tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM/ DFM and NPP valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service.
- Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
- Valve actuator recalibration REQUIRED after installation (Click for details)
- System contains Polyphonic Harmonizer and SwitchFire® Technology
- System ships in 2 boxes
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray |
2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) valves and NPP dual mode exhaust valves. It features the aggressive ATAK® sound level for an exciting driving experience with no drone inside the vehicle. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 each side) l 4" round bright chrome on T-304 stainless steel tips. Systems are also available with black chrome on T-304 stainless steel tips, or carbon fiber tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM/ DFM valves and NPP valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service.
- Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
- Valve actuator recalibration REQUIRED after installation (Click for details)
- System contains Polyphonic Harmonizer and SwitchFire® Technology
- System ships in 2 boxes
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray |
2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) and NPP dual mode exhaust valves. The S-Type sound level delivers a powerful, yet balanced sound with a deep tone. Our exhaust provides a more exciting driving experience without any drone. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad 4" round carbon fiber tips with bright centers. Systems are also available with bright chrome on T-304 stainless steel tips, or black chrome on T-304 stainless steel tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes.
- Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
- Valve actuator recalibration REQUIRED after installation (Click for details)
- System contains Polyphonic Harmonizer and SwitchFire® Technology
- System ships in 2 boxes
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray |
2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented some unique challenges. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) valves and NPP dual mode exhaust valves. The S-Type sound delivers a powerful, yet balanced sound with a deep tone and no drone. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with 4" round black chrome on T-304 stainless steel tips. Using BORLA® Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. Systems are also available with bright chrome on T-304 stainless steel tips, or carbon fiber tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM/ DFM and NPP valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to a Chevrolet dealer for the recalibration service.
- Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
- Valve actuator recalibration REQUIRED after installation (Click for details)
- System contains Polyphonic Harmonizer and SwitchFire® Technology
- System ships in 2 boxes
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray |
Borla(r) presents their premium exhaust system for the Ford Mustang Shelby GT500. Our dual 3" Cat-Back(tm) has been developed specifically for Ford's new supercharged 5.2L Predator engine with performance and sound in mind. The Borla(r) ATAK(r) sound level delivers an aggressive, head-turning sound that is fit for the Ford Mustang Shelby GT500. This exhaust system features quad 5" carbon fiber tips with black anodized centers, but is also available with bright chrome or black chrome tips. Our Cat-Back(tm) system retains the Active Exhaust Valve functionality and for the first time ever, includes our patent-pending SwitchFire(r) X-Pipe design. To ensure there's no compromise in comfort, it features our No-Drone technology. Elevate your driving experience, bolt on a Borla(r). Use With Connecting Pipe Kit 60722 For 2021-2023 Ford Mustang Mach 1 5.0L., Cat-Back(tm) Exhaust System, ATAK(r) Sound Level, Borla(r) SwitchFire(r) X-Pipe, Retains Active Exhaust Functionality, Dual 3" System Diameter, Quad 5" Carbon Fiber Tips With Bright Centers, T-304 Stainless Steel, No-Drone, Million-Mile Warranty, , Each Borla(r) Exhaust System is built from premium T-304 series stainless steel to give you the absolute best in performance and durability. We strive to provide you with the best quality products and stand behind our systems with a Million-Mile Warranty.
- Use With Connecting Pipe Kit 60722 For 2021-2023 Ford Mustang Mach 1 5.0L
- See below for additional Product Features & Benefits
- System contains SwitchFire(r) technology
- System contains Active Exhaust Valves
- 3" diameter system
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Ford | Mustang | Shelby GT350 |
| 2020 | Ford | Mustang | Shelby GT350R |
| 2020-2022 | Ford | Mustang | Shelby GT500 |
Borla(r) presents their premium exhaust system for the Ford Mustang Shelby GT500. Our dual 3" Cat-Back(tm) has been developed specifically for Ford's new supercharged 5.2L Predator engine with performance and sound in mind. The Borla(r) ATAK(r) sound level delivers an aggressive, head-turning sound that is fit for the Ford Mustang Shelby GT500. This exhaust system features quad 5" black chrome on T-304 stainless steel tips, but is also available with bright chrome or carbon fiber tips. Our Cat-Back(tm) system retains the Active Exhaust Valve functionality and for the first time ever, includes our patent-pending SwitchFire(r) X-Pipe design. To ensure there's no compromise in comfort, it features our No-Drone technology. Elevate your driving experience, bolt on a Borla(r). Use With Connecting Pipe Kit 60722 For 2021-2023 Ford Mustang Mach 1 5.0L., Cat-Back(tm) Exhaust System, ATAK(r) Sound Level, Borla(r) SwitchFire(r) X-Pipe, Retains Active Exhaust Functionality, Dual 3" System Diameter, Quad 5" Black Chrome On T-304 Stainless Steel Tips, T-304 Stainless Steel, No-Drone, Million-Mile Warranty, , Each Borla(r) Exhaust System is built from premium T-304 series stainless steel to give you the absolute best in performance and durability. We strive to provide you with the best quality products and stand behind our systems with a Million-Mile Warranty.
- Use With Connecting Pipe Kit 60722 For 2021-2023 Ford Mustang Mach 1 5.0L
- See below for additional Product Features & Benefits
- System contains SwitchFire(r) technology
- System contains Active Exhaust Valves
- 3" diameter system
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Ford | Mustang | Shelby GT350 |
| 2020 | Ford | Mustang | Shelby GT350R |
| 2020-2022 | Ford | Mustang | Shelby GT500 |
Borla(r) presents their premium exhaust system for the Ford Mustang Shelby GT500. Our dual 3" Cat-Back(tm) has been developed specifically for Ford's new supercharged 5.2L Predator engine with performance and sound in mind. The Borla(r) ATAK(r) sound level delivers an aggressive, head-turning sound that is fit for the Ford Mustang Shelby GT500. This exhaust system features quad 5" bright chrome on T-304 stainless steel tips, but is also available with black chrome or carbon fiber tips. Our Cat-Back(tm) system retains the Active Exhaust Valve functionality and for the first time ever, includes our patent-pending SwitchFire(r) X-Pipe design. To ensure there's no compromise in comfort, it features our No-Drone technology. Elevate your driving experience, bolt on a Borla(r). Use With Connecting Pipe Kit 60722 For 2021-2023 Ford Mustang Mach 1 5.0L., Cat-Back(tm) Exhaust System, ATAK(r) Sound Level, Borla(r) SwitchFire(r) X-Pipe, Retains Active Exhaust Functionality, Dual 3" System Diameter, Quad 5" Bright Chrome On T-304 Stainless Steel Tips, T-304 Stainless Steel, No-Drone, Million-Mile Warranty, , Each Borla(r) Exhaust System is built from premium T-304 series stainless steel to give you the absolute best in performance and durability. We strive to provide you with the best quality products and stand behind our systems with a Million-Mile Warranty.
- Use With Connecting Pipe Kit 60722 For 2021-2023 Ford Mustang Mach 1 5.0L
- See below for additional Product Features & Benefits
- System contains SwitchFire(r) technology
- System contains Active Exhaust Valves
- 3" diameter system
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Ford | Mustang | Shelby GT350 |
| 2020 | Ford | Mustang | Shelby GT350R |
| 2020-2022 | Ford | Mustang | Shelby GT500 |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2021 | Jeep | Grand Cherokee | 80th Anniversary |
| 2018-2020 | Jeep | Grand Cherokee | Altitude |
| 2018-2021 | Jeep | Grand Cherokee | High Altitude |
| 2014-2020 | Jeep | Grand Cherokee | Laredo |
| 2021 | Jeep | Grand Cherokee | Laredo E |
| 2021 | Jeep | Grand Cherokee | Laredo X |
| 2014-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2014-2021 | Jeep | Grand Cherokee | Overland |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
| 2019-2020 | Jeep | Grand Cherokee | Upland |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2021 | Jeep | Grand Cherokee | 80th Anniversary |
| 2018-2020 | Jeep | Grand Cherokee | Altitude |
| 2018-2021 | Jeep | Grand Cherokee | High Altitude |
| 2014-2020 | Jeep | Grand Cherokee | Laredo |
| 2021 | Jeep | Grand Cherokee | Laredo E |
| 2021 | Jeep | Grand Cherokee | Laredo X |
| 2014-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2014-2021 | Jeep | Grand Cherokee | Overland |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
| 2019-2020 | Jeep | Grand Cherokee | Upland |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2021 | Jeep | Grand Cherokee | 80th Anniversary |
| 2018-2020 | Jeep | Grand Cherokee | Altitude |
| 2018-2021 | Jeep | Grand Cherokee | High Altitude |
| 2014-2020 | Jeep | Grand Cherokee | Laredo |
| 2021 | Jeep | Grand Cherokee | Laredo E |
| 2021 | Jeep | Grand Cherokee | Laredo X |
| 2014-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2014-2021 | Jeep | Grand Cherokee | Overland |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
| 2019-2020 | Jeep | Grand Cherokee | Upland |
EXCEPT Diesel engine. EXCEPT vehicles with Dual Rear Wheels. This 3.5" diameter Cat-Back™ system features the classic BORLA® S-Type sound with no drone inside the vehicle. The exhaust exits thru a 5" round bright chrome on T-304 stainless steel tip. A system with a black chrome on T-304 stainless steel tip is also available. Add Extension Pipe 60713 For Crew Cab With Long Bed (8' 2") 172" Wheelbase vehicles. BORLA® Cat-Back™ and Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA® Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA® stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
- Add Extension Pipe 60713 for Crew Cab With Long Bed (8' 2") 172" Wheelbase vehicles
- EXCEPT vehicles with Dual Rear Wheels
- EXCEPT Diesel engine
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Silverado 2500 HD | Custom |
| 2020-2025 | Chevrolet | Silverado 2500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 2500 HD | WT |
| 2024-2025 | Chevrolet | Silverado 2500 HD | ZR2 |
| 2020-2025 | Chevrolet | Silverado 3500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 3500 HD | WT |
| 2020-2025 | GMC | Sierra 2500 HD | AT4 |
| 2024-2025 | GMC | Sierra 2500 HD | AT4X |
| 2020-2021 | GMC | Sierra 2500 HD | Base |
| 2020-2025 | GMC | Sierra 2500 HD | Denali |
| 2024-2025 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 2500 HD | Pro |
| 2020-2025 | GMC | Sierra 2500 HD | SLE |
| 2020-2025 | GMC | Sierra 2500 HD | SLT |
| 2020-2025 | GMC | Sierra 3500 HD | AT4 |
| 2020-2021 | GMC | Sierra 3500 HD | Base |
| 2020-2025 | GMC | Sierra 3500 HD | Denali |
| 2024-2025 | GMC | Sierra 3500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 3500 HD | Pro |
| 2020-2025 | GMC | Sierra 3500 HD | SLE |
| 2020-2025 | GMC | Sierra 3500 HD | SLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2022 | Hyundai | Veloster N | Base |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2022 | Hyundai | Veloster N | Base |
The Borla(r) ATAK(r) system 140826CFBA, is specifically tuned for performance and sound on the Supra's 3.0L twin-scroll turbocharged inline six engine. Our system is designed to be drone-free so you can get the head-turning sound of the ATAK(r) and still enjoy a comfortable sound inside the vehicle during cruise. This Cat-Back(tm) features a 3.5" pipe diameter that splits into dual 3" and comes with single 4.5" round carbon fiber tips with black anodized centers on each tail pipe to complete the look of the exhaust. Systems with bright chrome on T-304 stainless steel tips, and black chrome on T-304 stainless steel tips are also available. It includes our Polyphonic Harmonizer technology and has a functioning valve that works with the factory actuator to change the exhaust volume. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. As with all Borla(r) products, it is constructed using T-304 stainless steel for increased durability and is backed by our Million Mile Warranty. Bolt-on a Borla(r) and give your Supra the sound it deserves.
- System features Polyphonic Harmonizer technology
- System contains functioning exhaust valve
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2020-2025 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2025 | Toyota | GR Supra | Premium |
This BORLA® Cat-Back™ system is specifically tuned for performance and sound on the GR Supra's 3.0L twin-scroll turbocharged inline six engine. Our system is designed to be drone-free so you can get the head-turning sound of the ATAK® and still enjoy a comfortable sound inside the vehicle during cruise. The system includes our Polyphonic Harmonizer technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA® mufflers. The mufflers then enhance this sound to the character and volume appropriate for this aggressive ATAK® system. The system also has a functioning valve that works with the factory actuator to change the exhaust volume. This Cat-Back™ system features a 3.5" pipe diameter that splits into dual 3" and comes with single 4.5" round black chrome on T-304 stainless steel tips on each tail pipes to complete the look of the exhaust. Using BORLA® Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. Systems with bright chrome on T-304 stainless steel, and carbon fiber with black anodized center tips are also available. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. As with all BORLA® products, it is constructed using T-304 stainless steel for increased durability. This is backed by our Million Mile Warranty. Bolt-on a BORLA® and give your Supra the power and sound it deserves.
- 4.5" Round Black Chrome On T-304 Stainless Steel Tips
- Valved System (retains factory exhaust modes)
- Polyphonic Harmonizer Technology
- 3.5" To Dual 3" Pipe Diameter
- Cat-Back™ Exhaust System
- T-304 Stainless Steel
- Million Mile Warranty
- No-Drone
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2020-2025 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2025 | Toyota | GR Supra | Premium |
This BORLA Cat-Back™ system is specifically tuned for performance and sound on the GR Supra's 3.0L twin-scroll turbocharged inline six engine. Our system is designed to be drone-free so you can get the head-turning sound of the ATAK and still enjoy a comfortable sound inside the vehicle during cruise. The system includes our Polyphonic Harmonizer technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA mufflers. The mufflers then enhance this sound to the character and volume appropriate for this aggressive ATAK system. The system also has a functioning valve that works with the factory actuator to change the exhaust volume. This Cat-Back™ system features a 3.5" pipe diameter that splits into dual 3" and comes with single 4.5" round bright chrome on T-304 stainless steel tips on each tail pipe to complete the look of the exhaust. Systems with black chrome on T-304 stainless steel tips, and carbon fiber tips are also available. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. As with all BORLA products, it is constructed using T-304 stainless steel for increased durability. This is backed by our Million Mile Warranty. Bolt-on a BORLA and give your Supra the power and sound it deserves.
- 4.5" Round Bright Chrome On T-304 Stainless Steel Tips
- Valved System (retains factory exhaust modes)
- Polyphonic Harmonizer Technology
- 3.5" To Dual 3" Pipe Diameter
- Cat-Back™ Exhaust System
- T-304 Stainless Steel
- Million Mile Warranty
- No-Drone
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2020-2025 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2025 | Toyota | GR Supra | Premium |
BORLA'S Cat-Back™ system for the eighth generation Toyota Camry has been tuned for flow and sound specifically for the 3.5L V6 engine in the Camry XSE. The S-Type sound level delivers a classic, sporty sound without any drone in the cabin. This 2.5" diameter into dual 2.25" system features dual 3.5" round black chrome on T-304 stainless steel tips on each muffler assembly. Using BORLA Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. Systems are also available with bright chrome on T-304 stainless steel tips. BORLA Cat-Back™ & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Each BORLA Exhaust System is built from premium T-304 series stainless steel to give you the absolute best in performance and durability. We strive to provide you with the highest quality products and stand behind our systems with a Million-Mile Warranty.
- 3.5" Round Black Chrome On T-304 Stainless Steel Tips
- T-304 Stainless Steel
- Million-Mile Warranty
- Bolt-On Installation
- S-Type Sound Level
- Cat-Back™ System
- No-Drone
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2024 | Toyota | Camry | XSE |
Showing 360/722
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.