Fits 2020-2025 Toyota GR Supra (3.0L) Base, Premium, Launch Edition, and A91 Edition models.

The Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-Back exhaust system is engineered specifically for the Supra's 3.0L twin-scroll turbocharged inline-six to deliver an aggressive, head-turning sound without cabin drone during cruising. This system features a high-flow 3.5-inch main pipe that splits into dual 3-inch tailpipes, finishing with massive 4.5-inch round carbon fiber tips with black anodized centers.

Built for performance and longevity, the system incorporates Borla's Polyphonic Harmonizer technology and includes a functioning exhaust valve that integrates seamlessly with your factory actuator to maintain drive-mode volume control. Every system is CNC-manufactured from premium T-304 stainless steel with ultra-smooth mandrel bends to ensure maximum exhaust velocity and a precise bolt-on fit.

• System Type: Cat-Back Exhaust
• Series: ATAK
• Piping Diameter: 3.5in into dual 3in
• Tip Description: Dual 4.5in Round Carbon Fiber with Black Anodized Centers
• Material: T-304 Stainless Steel
• Includes Polyphonic Harmonizer technology
• Maintains factory exhaust valve functionality
• Manufacturer Part Number: 140826CFBA
• Borla Million Mile Warranty

Fits 2020-2025 Toyota GR Supra (3.0L) Base, Premium, A91 Edition, and Launch Edition.

The Borla ATAK Cat-Back Exhaust System is specifically tuned for the 3.0L twin-scroll turbocharged inline-six powering the GR Supra. This system delivers an aggressive, high-decibel exhaust note while utilizing a no-drone design to maintain cabin comfort during cruising. It features an integrated valve that works directly with the factory actuator, allowing you to retain the vehicle's original switchable exhaust modes.

Constructed from mandrel-bent T-304 stainless steel for maximum flow and durability, the system utilizes 3.5-inch piping that transitions into dual 3-inch paths. It incorporates Borla's patented Polyphonic Harmonizer technology, which uses precise pipe lengths and diameters to produce a rich, synchronized sound profile. The system is finished with dual 4.5-inch round black chrome tips for a distinct, high-performance aesthetic.

• System Type: Cat-Back Exhaust
• Series: ATAK (Aggressive Sound)
• Material: T-304 Stainless Steel
• Pipe Diameter: 3.5" into dual 3"
• Tip Size: 4.5" Round
• Tip Finish: Black Chrome
• Valve Type: Retains factory actuator functionality
• Warranty: Million Mile Warranty
• Manufacturer Part Number: 140826BC

Note: For maintenance of the black chrome finish, clean tips with hot water and a microfiber cloth. Borla Stainless Steel Polish (p/n 21499) is not recommended for black chrome tips.

Fits 2020-2025 Toyota GR Supra Base, Premium, Launch Edition, and A91 Edition (3.0L).

This Borla ATAK Cat-Back Exhaust System is engineered specifically for the 3.0L twin-scroll turbocharged inline-six powering the A90/A91 Supra. Designed for drivers seeking an aggressive exterior sound without sacrificing interior comfort, this system features Borla's proprietary Polyphonic Harmonizer technology. This patented design utilizes pipes of varying diameters and lengths to harmonize exhaust notes into a clean, full-bodied sound that eliminates drone during highway cruising.

The assembly includes an integrated valve that interfaces directly with the factory actuator, allowing you to retain the vehicle's original exhaust modes. Constructed from high-quality T-304 stainless steel with ultra-smooth mandrel bends, this system maximizes exhaust flow and durability. Precision CNC manufacturing ensures a bolt-on fit to factory mounting points.

• System Type: Cat-Back Exhaust
• Series: ATAK (Aggressive Tone)
• Tubing Diameter: 3.5-inch into dual 3-inch
• Tip Description: Dual 4.5-inch round bright chrome on T-304 stainless steel
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140826
• Warranty: Million Mile Warranty
• Features: Valved system (retains factory modes), Polyphonic Harmonizer, and No-Drone technology

Fits 2018-2024 Toyota Camry XSE (3.5L V6).

The Borla S-Type Cat-Back exhaust system is specifically tuned to optimize flow and acoustics for the eighth-generation Toyota Camry XSE 3.5L V6. This system delivers a classic, sporty exhaust note that enhances the driving experience without introducing cabin drone. Constructed from premium T-304 austenitic stainless steel, this exhaust offers superior durability and corrosion resistance compared to T-400 series alternatives.

The assembly features 2.5-inch diameter piping that transitions into dual 2.25-inch sections, terminating in dual split rear exits. The four 3.5-inch round tips are finished in black chrome over T-304 stainless steel for a sleek, high-end look. Note: To preserve the black chrome finish, clean the tips only with hot water and a microfiber cloth; do not use stainless steel polish.

• System Type: Cat-Back™
• Sound Level: S-Type (Sporty/No-Drone)
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.5" into dual 2.25"
• Tip Description: Dual 3.5" Round Black Chrome on T-304 Stainless Steel
• Exit Style: Dual Split Rear Exit
• Installation: Direct Bolt-On
• Manufacturing: CNC-machined with ultra-smooth mandrel bends
• Manufacturer Part Number: 140823BC
• Warranty: Million-Mile Warranty

The Borla S-Type Cat-Back Exhaust System (140823) is engineered specifically for the 2018-2024 Toyota Camry XSE equipped with the 3.5L V6 engine. This system provides a classic, sporty exhaust note that enhances the vehicle's character without introducing unwanted cabin drone. Designed for performance and durability, it features a 2.5-inch main pipe that splits into dual 2.25-inch tubing for optimized flow.

Constructed from premium T-304 austenitic stainless steel, this exhaust is built to withstand corrosion far better than T-400 series alternatives. The system utilizes ultra-smooth mandrel bends to maintain consistent diameter through every turn, maximizing exhaust velocity. Each kit concludes with dual 3.5-inch round bright chrome tips on each muffler assembly for a polished, aggressive rear exit.

• Fitment: 2018-2024 Toyota Camry XSE (3.5L)
• Sound Level: S-Type (Sporty, no-drone)
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.5" into dual 2.25"
• Tip Finish: Bright Chrome
• Tip Size: 3.5" Round
• Exit: Dual Split Rear Exit
• Installation: Direct Bolt-On
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 140823

Fits 2018-2025 Jeep Wrangler JLU/Unlimited models equipped with the 2.0L Turbo engine.

Designed for the off-road enthusiast, the Borla Climber / Rock Crawler Cat-Back system (part number 140822) provides essential ground clearance for rock crawling and overlanding. By utilizing a high-clearance turn-down tip that exits before the rear bumper, this system eliminates the risk of damage to the exhaust on steep departures or technical obstacles.

The system is tuned specifically for the 2.0L Turbo I4, featuring Borla's Touring sound level to deliver a deeper, throatier exhaust note without being intrusive during highway cruising. Built from premium T-304 austenitic stainless steel, this exhaust offers superior corrosion resistance compared to T-400 series alternatives. CNC mandrel-bent 2.75-inch piping ensures maximum exhaust flow and a precise factory-style fitment.

• System Type: Cat-Back Exhaust
• Series: Climber / Rock Crawler
• Sound Level: Touring (No-Drone Guarantee)
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.75"
• Tip Style: Brushed Stainless Steel Turn Down Exit
• Manufacturing: CNC Mandrel-Bent
• Manufacturer Part Number: 140822
• Warranty: Million Mile Warranty

Fits 2020-2023 Ford Explorer (ST, Platinum, King Ranch) and 2020-2023 Lincoln Aviator models equipped with the 3.0L V6 EcoBoost engine.

The Borla ATAK Cat-Back exhaust system is engineered for drivers seeking the most aggressive sound profile available without introducing interior cabin drone. This system is constructed from premium T-304 stainless steel and features 2.25-inch mandrel-bent tubing to optimize exhaust flow. The front muffler includes an integrated internal H-pipe to improve the exhaust note and balance pressure across the system.

Installation is a direct bolt-on process, utilizing factory mounting points for a stress-free fit. The system is finished with quad 4-inch carbon fiber tips featuring bright centers, providing a high-end aesthetic that complements the performance of the 3.0L EcoBoost powertrain.

• System Type: Cat-Back Exhaust
• Sound Level: ATAK (Aggressive)
• Tubing Diameter: 2.25 in.
• Tip Description: Quad 4 in. Carbon Fiber with Bright Centers
• Material: T-304 Stainless Steel
• Muffler Configuration: Front muffler with internal H-pipe
• Installation: Bolt-on
• Manufacturer Part Number: 140821CF
• Warranty: Million-Mile Warranty

Fits select 2020-2023 Ford Explorer (ST, Platinum, King Ranch) and Lincoln Aviator models equipped with the 3.0L V6 EcoBoost engine.

The Borla ATAK Cat-Back exhaust system is specifically engineered to provide an aggressive, attention-grabbing sound profile while maintaining a drone-free cabin environment. This 2.25-inch system features a front muffler with an integrated internal H-pipe, designed to balance exhaust pulses for improved performance and a refined V6 tone. Constructed from premium T-304 stainless steel, this kit is built for long-term durability and resistance to corrosion.

This system is a direct bolt-on replacement for the factory exhaust, utilizing existing mounting points for a precise fit. It is finished with quad 4-inch black chrome tips that provide a high-end, custom look to the rear of the vehicle.

• Sound Level: ATAK (Aggressive)
• Piping Diameter: 2.25 inches
• Tip Description: Quad 4-inch Black Chrome on T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Installation: Bolt-on, no welding required
• Performance Feature: Internal H-pipe included in front muffler
• Manufacturer Part Number: 140821BC
• Warranty: Borla Million-Mile Warranty

Fits 2020-2023 Ford Explorer (ST, Platinum, King Ranch) and Lincoln Aviator (3.0L V6 EcoBoost).

Engineered for owners seeking the most aggressive sound profile in the Borla lineup, the ATAK Cat-Back exhaust system delivers a high-volume, performance-oriented tone without the cabin drone common in lesser systems. This 2.25-inch diameter system is constructed from premium T-304 stainless steel, offering superior corrosion resistance compared to T-409 or aluminized steel alternatives. The front muffler features an integrated internal H-pipe, which balances exhaust pulses for improved flow and a more refined acoustic signature.

Installation is a direct bolt-on process using factory mounting points, requiring no welding or major modifications. The system is finished with quad 4-inch bright chrome tips on T-304 stainless steel, providing a high-luster look that complements the Explorer and Aviator rear valance.

• Series: ATAK (Acoustically Tuned Applied Kinetics)
• Piping Diameter: 2.25 inches
• Tip Description: Quad 4-inch Bright Chrome on T-304 Stainless Steel
• Material: Mandrel-bent T-304 Stainless Steel
• Installation: Direct bolt-on to OEM system
• Performance Features: Internal H-Pipe for optimized sound and flow
• Manufacturer Part Number: 140821
• Warranty: Borla Million-Mile Warranty

Fits select 2020-2023 Ford Explorer and Lincoln Aviator (3.0L).

The Borla S-Type Cat-Back exhaust system (140820BC) is engineered specifically for the 3.0L V6 EcoBoost engine, providing a balanced, sporty tone without the interior resonance or drone often found in aftermarket systems. This true dual-exhaust design utilizes 2.25-inch diameter piping and is constructed from premium T-304 stainless steel for long-term corrosion resistance and durability.

Built with precision CNC manufacturing and ultra-smooth mandrel bends, this system ensures maximum exhaust flow and a perfect fit to factory mounting points. The system is finished with quad 4-inch black chrome on T-304 stainless steel tips. Note: To maintain the finish, do not use stainless steel polish on these black chrome tips; clean only with hot water and a microfiber cloth.

• True Dual cat-back design with 2.25-inch mandrel-bent tubing
• T-304 stainless steel construction for superior durability
• Quad 4-inch black chrome stainless steel tips
• S-Type sound profile for a sporty, no-drone driving experience
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: 140820BC
• Million-Mile Warranty

Vehicle Fitment:

Fits select 2020-2023 Ford Explorer (King Ranch, Platinum, ST) and Lincoln Aviator (Base, Black Label, Grand Touring, Livery, Reserve) models equipped with the 3.0L V6 EcoBoost engine.

Give your Ford or Lincoln the signature Borla sound with this 2.25-inch S-Type Cat-Back exhaust system. Engineered as a True Dual design specifically for the 3.0L EcoBoost platform, this system provides a balanced, sporty exhaust note that enhances the driving experience without introducing cabin drone. The system is constructed from high-quality T-304 stainless steel to resist corrosion and utilizes ultra-smooth mandrel bends for maximum exhaust flow and power efficiency.

Installation is straightforward as this kit bolts directly to the factory mounting points. The exit features quad round 4-inch bright chrome tips on T-304 stainless steel tailpipe assemblies for a premium, finished look. Like all Borla systems, this kit is manufactured with CNC precision and backed by a Million-Mile Warranty.

• System Type: Cat-Back
• Tubing Diameter: 2.25-inch
• Design: True Dual
• Tip Description: Quad 4-inch round bright chrome T-304 stainless steel
• Sound Level: S-Type (Balanced/Sporty)
• Material: Premium T-304 Stainless Steel
• Installation: Bolt-on factory replacement
• Manufacturer Part Number: 140820

Fits 2017-2025 Porsche 718 Cayman and Boxster models (2.0L / 2.5L), including Base, GTS, S, Style Edition, and T submodels. Note: Does NOT fit vehicles equipped with Porsche Sport Exhaust (PSE) as this system does not contain active valves.

The Borla S-Type Cat-Back exhaust system (140817) is specifically tuned for the 2.0L and 2.5L turbocharged engines found in the 718 platform. This 2.25-inch diameter system provides a significant upgrade in both sound and durability. The S-Type sound level delivers a deep, aggressive exhaust note under load without compromising daily drivability, backed by Borla’s No-Drone guarantee for cabin comfort.

Built for longevity, the system is constructed from high-quality T-304 stainless steel. Precision CNC manufacturing and ultra-smooth mandrel bends ensure maximum exhaust flow and an accurate fit to factory mounting points. The assembly is completed with dual 4-inch round polished T-304 stainless steel tips for a premium finished look.

• Part Number: 140817
• System Type: Cat-Back
• Series: S-Type
• Tubing Diameter: 2.25"
• Tip Description: Dual 4" Polished Round T-304 Stainless Steel
• Construction: T-304 Stainless Steel with Mandrel Bends
• Warranty: Million-Mile Warranty

Fits 2020-2025 Jeep Gladiator Sport, Mojave, Rubicon, Overland, and Willys models (3.6L).

The Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-Back system is engineered for Jeep Gladiator owners who want a high-volume, aggressive exhaust note that doesn't compromise interior comfort. This system replaces the factory exhaust with a high-flow 2.75" to dual 2" configuration, specifically tuned to give the 3.6L Pentastar engine a deep growl while maintaining a drone-free experience inside the cabin.

Built for the trail and the street, this system is constructed from premium T-304 stainless steel to resist corrosion and handle harsh environments. The tailpipes and tips are finished in a high-temperature ceramic black coating for a rugged, stealthy aesthetic. The exhaust features a split side exit with dual 3.5" black-coated tips on each side for a total of four outlets.

• System Type: Cat-Back Exhaust
• Sound Level: ATAK (Most Aggressive)
• Material: T-304 Stainless Steel
• Finish: Ceramic Black Tailpipes and Tips
• Piping Diameter: 2.75" into dual 2.0"
• Tip Diameter: Dual 3.5" Black Coated Tips
• Exit Style: Split Side Exit
• Manufacturer Part Number: 140816CB
• Warranty: Million-Mile Warranty

Fits 2020-2025 Jeep Gladiator (JT) models equipped with the 3.6L V6 engine.

The Borla ATAK (Aggressive Technology Auto Kar) Cat-Back exhaust system is engineered for Jeep owners seeking the most aggressive sound profile available. Specifically tuned for the 3.6L Pentastar engine, this system delivers a deep, powerful growl under acceleration while utilizing Borla's multi-core technology to ensure a drone-free experience in the cabin during highway cruising.

Construction features 2.75-inch mandrel-bent T-304 stainless steel tubing for maximum flow and corrosion resistance. This specific configuration (MPN: 140813CB) features a dual side-exit design. Both the tailpipe and the dual 3.5-inch outlet tips are finished in a high-temperature black coating for a stealthy aesthetic and long-term durability in off-road environments. The system is a direct bolt-on replacement for the factory exhaust, utilizing original mounting points.

• System Type: Cat-Back
• Sound Level: ATAK (Aggressive)
• Tubing Diameter: 2.75"
• Tip Description: Dual 3.5" Round Rolled Edge Angle-Cut
• Tip Finish: Black Coated
• Exit Style: Dual Side Exit (behind rear tire)
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140813CB
• Warranty: Borla Million-Mile Warranty (1-year on black coating/tip finish)

Fits 2020-2025 Jeep Gladiator Sport, Rubicon, Mojave, and other trims equipped with the 3.6L Pentastar V6 engine.

The Borla 140810 ATAK Climber Cat-Back™ system is engineered specifically for Jeep owners who prioritize ground clearance during off-roading, overlanding, and rock crawling. This high-clearance design utilizes a 2.75-inch diameter tailpipe section that terminates in a black-coated turndown tip, tucked away to avoid contact with trail obstacles that would damage standard exit pipes. Constructed from premium T-304 stainless steel, this system provides superior corrosion resistance for life on the trail.

The ATAK (Addictive Tone & Kindle) series is Borla's most aggressive sound level, tuned to give the 3.6L engine a deep, powerful growl without introducing cabin drone. Every system is precision-manufactured to ensure optimal exhaust flow and is backed by a Million-Mile Warranty for long-term peace of mind.

• System Type: Cat-Back™ Exhaust
• Series: ATAK® Climber
• Tubing Diameter: 2.75"
• Tip Style: Turndown
• Tip Finish: Black Coated
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140810
• Warranty: Million-Mile Warranty

Fits 2020-2025 Jeep Gladiator models (3.6L) including Sport, Rubicon, Mojave, Overland, and Willys trims.

The Borla Climber Cat-Back system is engineered specifically for off-roading, overlanding, and rock crawling where maximum ground clearance is critical. By utilizing a high-clearance design and a 2.75-inch brushed T-304 stainless steel turndown tip, this system eliminates the risk of catching a traditional tailpipe on trail obstacles. The S-Type muffler provides a significant increase in exhaust volume and a more aggressive note than the Touring series without the intrusive cabin drone found in lesser systems.

Constructed from premium T-304 austenitic stainless steel, this 140809 system is built to withstand harsh trail conditions and corrosion. The mandrel-bent 2.75-inch tubing is tuned to optimize flow and sound for the Pentastar 3.6L engine, ensuring a smooth, deep tone during acceleration and a quiet cruise on the highway.

• High-clearance Climber design for improved departure angles
• 2.75-inch diameter mandrel-bent T-304 stainless steel tubing
• S-Type sound level: aggressive exterior note with zero interior drone
• Brushed T-304 stainless steel turndown tip
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 140809
• Borla Million-Mile Warranty included

Fits 2017-2020 Honda Civic Si Sedan (1.5L).

The Borla S-Type Cat-Back exhaust system is engineered specifically for the tenth-generation Honda Civic Si's 1.5L Turbo engine. Designed to replace the restrictive and quiet factory setup, this system provides a sportier, more aggressive acoustic profile without the interior cabin drone typically associated with aftermarket exhausts. This direct bolt-on kit is manufactured using premium T-304 austenitic stainless steel to ensure maximum durability and corrosion resistance under high-heat conditions.

This specific configuration for the Civic Si Sedan features dual 4.25-inch intercooled tips finished in a high-temperature ceramic black coating for a stealthy, high-performance look. Borla stands behind the T-304 construction with their Million-Mile Warranty, providing confidence for the life of your vehicle.

• System Series: S-Type
• Tip Diameter: Dual 4.25-inch Intercooled
• Tip Finish: High-Temperature Ceramic Black
• Material: T-304 Austenitic Stainless Steel
• Installation: Easy Bolt-On to Factory Points
• Performance: Drone-Free Sound Profile
• Manufacturer Part Number: 140803CB

Fits 2005-2018 Nissan Frontier models with the 4.0L V6 engine (2WD/4WD), including Desert Runner, PRO-4X, Nismo Off-Road, S, SE, SL, SV, and LE trims.

The Borla S-Type Cat-Back Exhaust System (140802BC) is specifically tuned to provide a performance-oriented exhaust note for the Frontier's 4.0L V6 without cabin drone. This 2.5-inch diameter system is constructed from high-quality T-304 stainless steel to ensure long-term durability and corrosion resistance. The exit features a single passenger-side 4-inch round black chrome tip. Its cut-and-clamp design allows the system to accommodate both available wheelbases while retaining the factory catalytic converters.

Installation Note: Installation requires cutting the original equipment (O.E.) exhaust system. To maintain the black chrome finish, do not use stainless steel polish; clean only with hot water and a microfiber cloth.

• Series: S-Type
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.5"
• Tip Description: 4" Round Black Chrome on T-304 Stainless Steel
• Exit Configuration: Single Passenger Side Rear Exit
• Installation: Cut-and-Clamp (Requires cutting O.E. exhaust)
• Manufacturer Part Number: 140802BC
• Warranty: Million-Mile warranty (1-year on black coating/finish)

Fits 2005-2019 Nissan Frontier (4.0L V6) across all trims including SV, Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, and SL.

The Borla S-Type Cat-Back™ exhaust system (MPN 140802) delivers a high-performance exhaust note specifically tuned for the Nissan Frontier's 4.0L V6 engine. Engineered to eliminate cabin drone while providing an aggressive sound profile, this 2.5" diameter system features a single passenger-side exit that mimics the factory exit location while improving durability and flow.

Manufactured from premium T-304 stainless steel, the system is built to resist corrosion and handle the rigors of both 2WD and 4WD use. The exhaust is finished with a 4" round bright chrome T-304 stainless steel tip. The cut-and-clamp installation method allows the system to retain factory catalytic converters and provides fitment for both Frontier wheelbase configurations.

• Specifically tuned for 2005-2019 Nissan Frontier 4.0L V6
• S-Type sound level provides a deep, sporty tone without interior drone
• 2.5" diameter mandrel-bent T-304 stainless steel tubing
• 4" round bright chrome on T-304 stainless steel tip
• Cut-and-clamp installation fits both available wheelbases
• Retains original factory catalytic converters
• Borla Million-Mile Warranty
• Handcrafted in the USA

Note: Installation requires cutting the original (O.E.) equipment exhaust system.

Fits select 2014-2018 Ram 2500 and 3500 models (6.4L V8). This Borla S-Type Cat-Back system is engineered to deliver a deep, aggressive exterior sound profile while maintaining a drone-free cabin environment, specifically tuned for the heavy-duty HEMI powertrain.

The 140801BC system is constructed from premium T-304 stainless steel for maximum durability and corrosion resistance. To ensure a perfect fit across all cab and bed configurations, this exhaust utilizes the factory transition pipe between the catalytic converters and the muffler. Please note that this system fits Single Rear Wheel (SRW) models only and is not compatible with Dual Rear Wheel (DRW) trucks.

• System Type: Cat-Back
• Series: S-Type
• Material: T-304 Stainless Steel
• Piping: Mandrel-bent tubing for high-flow performance
• Tip Finish: Black Chrome
• Compatibility: Reuses factory transition pipe; fits all cab/bed configurations
• Exclusions: Does not fit Dual Rear Wheel models
• Manufacturer Part Number: 140801BC

Maintenance Note: To preserve the black chrome finish, do not use metal polish. Clean tips only with hot water and a microfiber cloth. Covered by the Borla Million-Mile Warranty.

Fits 2014-2018 Ram 2500 and 3500 models equipped with the 6.4L V8 engine (excluding Dual Rear Wheel models). This system is designed to fit all cab and bed configurations by utilizing the factory transition pipe between the catalytic converters and the muffler.

The Borla S-Type Cat-Back exhaust system (MPN 140801) is engineered to provide a significant upgrade in exhaust note and durability. Constructed entirely from premium T-304 stainless steel, this system offers superior corrosion resistance compared to T-409 alternatives. The 3.50-inch diameter piping is mandrel-bent to maintain maximum flow throughout the system, while the S-Type muffler design delivers an aggressive, performance-oriented sound without the annoyance of interior cabin drone.

• Fits 2014-2018 Ram 2500/3500 (6.4L V8)
• Excludes Dual Rear Wheel (DRW) models
• 3.50-inch mandrel-bent T-304 stainless steel tubing
• Single 4.0-inch polished chrome on T-304 stainless steel tip
• Utilizes factory transition pipe for multi-cab/bed fitment
• S-Type muffler for optimized sound and zero drone
• Includes all necessary installation hardware
• Manufacturer Part Number: 140801
• Borla Million-Mile Warranty

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (2.7L) models with factory single side exit.

The Borla S-Type Cat-Back exhaust system (140800BC) is specifically tuned for the GM 2.7L turbo four-cylinder engine, delivering a deep, aggressive tone without the interior drone often associated with four-cylinder applications. Engineered with CNC manufacturing and ultra-smooth mandrel bends, this 3-inch system optimizes exhaust velocity for improved flow and power. The kit is constructed from premium T-304 stainless steel, offering superior corrosion resistance compared to 400-series alternatives.

• System Type: Cat-Back
• Sound Level: S-Type (Moderate/Aggressive)
• Tubing Diameter: 3"
• Tip Description: Single 4" Black Chrome on T-304 Stainless Steel
• Construction: Patented straight-through and multi-core technology
• Material: High-quality T-304 stainless steel
• Manufacturer Part Number: 140800BC

Note: This system is designed for vehicles with factory single side exit only. Crew Cab models with the Standard Bed (6' 7" / 157" wheelbase) require Borla Adapter 60708 for installation. To maintain the finish, do not use Borla Stainless Steel Polish #21499 on the black chrome tip.

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500, as well as 2019 Silverado 1500 LD and Sierra 1500 Limited (5.3L V8, 143.5" Wheelbase).

The Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-Back exhaust system is designed for the 5.3L owner who demands the most aggressive, head-turning sound available. This system provides a significant increase in exhaust volume and a deeper, more powerful tone than the stock exhaust while remaining completely drone-free during highway cruising. Engineered with precision CNC manufacturing, this kit ensures an accurate, bolt-on fit to the factory mounting points.

Construction features premium T-304 austenitic stainless steel, providing superior corrosion resistance and durability compared to T-400 series alternatives. The ultra-smooth mandrel-bent piping maximizes exhaust flow for improved performance. The system concludes with dual side-exit round rolled tips finished in a striking black chrome.

• System Type: Cat-Back Exhaust
• Series: ATAK
• Material: T-304 Stainless Steel
• Tip Finish: Black Chrome
• Tip Description: Round Rolled Dual Side Exit
• Wheelbase: 143.5" (Extended Cab/Standard Bed or Crew Cab/Short Bed)
• Manufacturer Part Number: 140797BC

Note: To maintain the black chrome finish, do not use stainless steel polish. Clean tips only with hot water and a microfiber cloth.

Fits select 2014-2018 Chevrolet Silverado 1500/GMC Sierra 1500 and 2019 Silverado 1500 LD/Sierra 1500 Limited (5.3L V8) with a 143.5-inch wheelbase.

The Borla ATAK (Abusive Tongue and Cheek) Cat-Back exhaust system is engineered for the 5.3L Silverado and Sierra owner who demands the most aggressive, head-turning sound profile available. This system provides a significant increase in tone and volume over the factory exhaust while utilizing Borla's polyphonic harmonizer technology to ensure a drone-free experience inside the cabin. Each kit is manufactured from premium T-304 austenitic stainless steel—a material superior to 400-series steel—providing maximum resistance against corrosion and road salt.

This system features a dual side exit configuration with round, rolled tips in a bright chrome finish. The 140797 is built with ultra-smooth mandrel bends to maximize exhaust flow and horsepower. Designed as a direct bolt-on replacement, it mounts to the factory exhaust hangers and mounting points for a straightforward installation.

• System Type: Cat-Back Exhaust
• Series: ATAK (Most Aggressive)
• Material: T-304 Austenitic Stainless Steel
• Exit Style: Dual Side Exit
• Tip Finish: Bright Chrome
• Tip Shape: Round Rolled
• Tubing Diameter: Mandrel-bent piping optimized for 5.3L V8
• Wheelbase: 143.5" (Extended Cab/Standard Bed or Crew Cab/Short Bed)
• Manufacturer Part Number: 140797
• Warranty: Million-Mile Warranty

Fits 2017-2024 Nissan Titan (Platinum Reserve, PRO-4X, S, SL, SV) equipped with the 5.6L V8 engine.

This Borla S-Type Cat-Back system is engineered specifically for the 5.6L Nissan Titan to deliver a distinct V8 growl without cabin drone. This True Dual system features 2.25-inch diameter piping and a muffler with an integrated internal H-pipe, designed to balance exhaust pressure for improved performance and a more aggressive tone. Constructed from premium T-304 stainless steel, the assembly utilizes CNC manufacturing and ultra-smooth mandrel bends to ensure maximum exhaust flow and a precise bolt-on fit to factory mounting points.

The system is finished with 4-inch black chrome tips over T-304 stainless steel. To maintain the finish of these black chrome tips, Borla recommends cleaning only with hot water and a microfiber cloth; do not use stainless steel polish. This system provides a significant acoustic upgrade and the long-term durability of Borla’s Million Mile Warranty.

• System Type: Cat-Back
• Configuration: True Dual
• Pipe Diameter: 2.25-inch
• Tip Size: 4.0-inch diameter
• Tip Finish: Black Chrome on T-304 Stainless Steel
• Muffler Type: S-Type with internal H-pipe
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140796BC

Fits 2017-2024 Nissan Titan Platinum Reserve, PRO-4X, S, SL, and SV (5.6L V8).

The Borla S-Type Cat-Back system (MPN 140796) is engineered to provide your Nissan Titan with a distinct V8 growl while maintaining a drone-free cabin experience. This 2.25-inch True Dual system features a muffler with an integrated internal H-pipe, which balances exhaust pulses for improved performance and a refined sound profile.

Constructed from premium T-304 stainless steel, the system utilizes ultra-smooth mandrel bends to ensure maximum flow and power. The assembly is finished with dual 4-inch bright chrome tips for a clean, professional appearance. Precision CNC manufacturing ensures this cat-back system bolts directly to factory mounting points for an accurate fit.

• System Type: True Dual Cat-Back
• Series: S-Type (Aggressive Sound Profile)
• Tubing Diameter: 2.25 in.
• Tip Diameter: 4.0 in.
• Tip Finish: T-304 Stainless Steel Bright Chrome
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140796
• Warranty: Borla Million Mile Warranty

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L V8) with a 147.4-inch wheelbase and factory single side exit.

The Borla S-Type Cat-Back exhaust system (140794BC) is engineered to provide a deep, aggressive exhaust note without the interior cabin drone. This 3-inch diameter system is constructed from premium T-304 austenitic stainless steel, offering superior corrosion resistance compared to T-400 series alternatives. It is specifically designed for 147.4-inch wheelbase configurations, including Extended Cab with Standard Bed (78.8") and Crew Cab with Short Bed (69.3"). For Crew Cab models with a Standard Bed (6' 7") and 157-inch wheelbase, the addition of Borla adapter 60708 is required.

This system features a side exit behind the passenger-side rear wheel, finished with a 4-inch round black chrome on T-304 stainless steel tip. Utilizing Borla’s patented straight-through and multi-core technology, this exhaust increases flow velocity for improved performance and fuel economy. Each kit uses mandrel-bent tubing and CNC precision manufacturing to ensure a perfect bolt-on fit to factory mounting points.

• Fits factory single side exit vehicles only
• 3-inch diameter T-304 stainless steel piping
• 4-inch round black chrome tip (P# 21499 polish not recommended)
• S-Type sound level with no-drone technology
• Fits 147.4-inch wheelbase (Extended Cab/Standard Bed & Crew Cab/Short Bed)
• Million-Mile Warranty included
• Manufacturer Part Number: 140794BC

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L) models with 147.4-inch wheelbase. Designed exclusively for vehicles with factory single side exit exhaust.

The Borla S-Type Cat-Back exhaust system (MPN 140794) is engineered to improve exhaust velocity and engine efficiency for the 5.3L V8. Constructed from premium T-304 austenitic stainless steel, this system features 3-inch mandrel-bent tubing and Borla's patented straight-through, multi-core technology. This design provides a significant increase in flow over the restrictive factory setup while delivering the aggressive S-Type sound profile without interior cabin drone.

This system installs to factory mounting points and features a side exit behind the passenger rear wheel. For Crew Cab Standard Bed (6' 7") models with a 157-inch wheelbase, adapter 60708 is required (sold separately).

• System Type: Cat-Back Exhaust
• Series: S-Type
• Tubing Diameter: 3.0 in.
• Tip Description: 4.0 in. Round Rolled Angle-Cut Bright Chrome
• Material: T-304 Stainless Steel
• Configuration: Side Exit (Single Passenger Side)
• Fitment: Extended Cab / Standard Bed (78.8 in.) or Crew Cab / Short Bed (69.3 in.)
• Wheelbase: 147.4 in.
• Manufacturer Part Number: 140794

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 models equipped with the 5.3L V8 engine. This system is specifically designed for 147.4-inch wheelbase configurations, including Extended Cab with Standard Bed (78.8") and Crew Cab with Short Bed (69.3").

The Borla Touring Cat-Back exhaust system (MPN 140793) is engineered for the truck owner seeking an upgraded acoustic profile without excessive volume. It delivers a deep, mellow tone that is significantly more refined than the factory system while maintaining a drone-free cabin environment during highway cruising. Constructed from premium T-304 austenitic stainless steel, this 3-inch diameter system features ultra-smooth mandrel bends and Borla's patented straight-through multi-core technology to optimize exhaust velocity and flow.

This kit is designed for vehicles equipped with a factory single side exit. It includes a 4-inch round, bright chrome-on-stainless steel tip for a classic finished appearance. For Crew Cab Standard Bed (157" WB) applications, adapter 60708 is required for installation.

• Part Number: 140793
• System Type: Cat-Back
• Tubing Diameter: 3.0"
• Sound Level: Touring (Mellow)
• Material: High-quality T-304 Stainless Steel
• Tip Description: 4" Bright Chrome T-304 Stainless Steel
• Exit Style: Single Side Exit
• Fitment Note: Fits factory single side exit vehicles ONLY
• Warranty: Borla Million-Mile Warranty

Fits 2018-2024 Dodge Durango SRT, SRT 392, and SRT 392 Plus/Premium models (6.2L / 6.4L).

Unlock the aggressive, head-turning roar of your HEMI engine with the Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-Back exhaust system. Engineered specifically for the Dodge Durango SRT, this 2.75-inch diameter system features a Merge X-Pipe to optimize exhaust flow and velocity, delivering increased performance and a powerful sound profile without interior cabin drone.

Constructed from premium T-304 stainless steel, this system utilizes mandrel-bent tubing and precision CNC manufacturing to ensure a perfect factory-style fit and long-term durability. The exhaust is finished with dual 4.5-inch round black chrome tips for a sleek, high-end appearance. Note: To maintain the finish of the black chrome tips, clean with hot water and a microfiber cloth only; do not use stainless steel polish.

• System Type: Cat-Back Exhaust
• Piping Diameter: 2.75"
• Sound Level: ATAK (Aggressive)
• Material: T-304 Stainless Steel
• Tip Description: Dual 4.5" Round Black Chrome
• Exit Style: Single Split Rear Exit
• Includes Merge X-Pipe for improved flow
• Manufacturer Part Number: 140792BC
• Warranty: Million-Mile warranty (1-year on tip finish)