Fits select 2006-2013 Mazda 3, 6, and CX-7 (2.3L).

The Cometic C14028 timing cover gasket is engineered using AFM (Aluminum Foam Material) to provide a superior, leak-free seal between the timing cover and engine block. This specialized material consists of a chemically blown, compounded nitrile synthetic rubber bonded to a high-strength aluminum core. Designed for durability and ease of installation, this gasket does not require additional liquid sealants or re-torquing after heat cycles.

• AFM Technology: Features an 85 percent recovery rate for consistent sealing performance under thermal expansion.
• Heat Resistance: Rated for operating temperatures exceeding 205° Fahrenheit.
• Torque Retention: The aluminum core provides strong torque retention to prevent hardware loosening over time.
• Clean Installation: Designed to replace worn OE gaskets without the mess of RTV or other sealants.
• Manufacturer Part Number: C14028

Fits select 1990-1996 Honda Accord and Prelude models (F22A1 / A4 / A6).

The Cometic MLS (Multi-Layer Steel) head gasket is engineered for superior sealing performance in high-demand automotive environments. Constructed from multiple layers of high-grade stainless steel, this gasket provides increased strength, excellent rebound characteristics, and long-term corrosion resistance. The outer layers are precision-embossed and coated on both sides with a Viton rubber material, ensuring a reliable seal across a variety of surface finishes and load conditions.

This design is specifically developed to require less clamp load than traditional gaskets, which helps reduce cylinder bore distortion while maintaining uniform load distribution across the sealing area. The Viton coating is rated for heat resistance up to 250°C (482°F), making it suitable for both performance street and track applications.

• Manufacturer Part Number: C14018-045
• Bore Size: 86mm
• Thickness: .045in
• Construction: Multi-Layer Steel (MLS)
• Coating: Viton rubber (Heat resistant to 250°C / 482°F)
• Material: Stainless Steel layers

Fits select 2002-2013 Honda and Acura models, including Civic Si, RSX, TSX, Accord, and RDX.

The Cometic C14012 valve cover gasket provides a superior sealing solution designed to outperform traditional cork or paper alternatives. This gasket is engineered with a soft durometer rubber molded over a rigid steel torque-limiting frame, ensuring consistent compression and extended reusability. The integrated steel core prevents the gasket from blowing out or being crushed due to over-tightening, making it an ideal choice for high-vacuum environments and high-performance applications.

• Manufacturer Part Number: C14012
• Material: Soft durometer rubber over a steel torque-limiting frame
• Engineered to resist blowout and over-compression
• Enhanced durability for high-vacuum and high-temperature conditions
• Direct replacement for OE-style gaskets with improved sealing capacity

Fits select 2002-2013 Honda and Acura models, including Civic Si, RSX, TSX, CR-V, and Accord (K20A1/A2/A3).

The Cometic C14011-060 Oil Pan Gasket is a high-performance sealing solution designed to provide a reliable interface between the oil pan and the engine block. Engineered from .060-inch thick AFM (Athetic Fiber Material), this gasket utilizes a nitrile synthetic rubber bonded to an aluminum core. This specialized construction offers an 85% recovery rate while maintaining exceptional torque retention, ensuring the gasket won't crush out or lose seal integrity over time. Designed for efficiency, the AFM material requires no additional sealants, RTV, or re-torquing after the initial installation.

• Manufacturer Part Number: C14011-060
• Material: AFM (.060 inch thickness)
• Temperature Resistance: Rated for over 205°F
• Recovery Rate: 85% for consistent sealing performance
• Installation: Direct replacement; no sealants required

Fits select 1990-2000 BMW 323, 325, 328, 525, 528, and Z3 models.

The Cometic MLX (Multi-Layer Stopper) head gasket is engineered to handle the high combustion pressures of performance engines. This gasket features an integrated stopper layer that provides a superior mechanical seal around the combustion chamber. This design increases clamp load directly at the cylinder without requiring higher torque specs that could lead to bore distortion. Constructed from high-quality stainless steel and coated on both sides with a 0.001-inch thick Viton layer, this gasket ensures a reliable seal across the entire mating surface. No additional sealants or head bolt re-torquing are required for installation.

• Manufacturer Part Number: C14010-067
• Bore Size: 85mm
• Compressed Thickness: .067in
• Material: Multi-Layer Steel with Integrated Stopper
• Finish: Viton Coated on both sides
• Provides improved clamp load and combustion sealing
• Replaces worn OE gaskets for M50 and M52 based engines

Fits select 2002-2011 Acura RSX and TSX, and Honda Accord, Civic, CR-V, and Element (2.0L).

This Cometic Armor Clad (AM) exhaust manifold gasket is engineered for extreme thermal environments where standard sealing materials often fail. Utilizing a clad-style construction, this gasket features carbon steel layers laminated on both sides to create a mechanically-bonded, highly durable seal. Designed to withstand the high-vibration and high-scrubbing environment of an exhaust system, it maintains its torque set while resisting corrosion and blowout.

• Manufacturer Part Number: C14007-064
• Material: Armor Clad laminated carbon steel
• Thickness: .064 inch
• Thermal Tolerance: Heat resistant up to 1832°F (1000°C)
• Maintains consistent torque set without burn-through or push-out
• Compatible with varying cylinder head and manifold material combinations

Vehicle Fitment:

• 2002-2006 Acura RSX (Base, Type-S)
• 2004-2008 Acura TSX (Base)
• 2003-2007 Honda Accord (DX, EX, EX-L, LX, SE, Special Edition, Value Package)
• 2005-2011 Honda Civic (Si, MUGEN Si)
• 2002-2009 Honda CR-V (EX, EX-L, LX, SE)
• 2003-2011 Honda Element (DX, EX, LX, SC)