Fits 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 Crew Cab models equipped with the 6.2L V8 engine.

The CORSA Performance cat-back exhaust system for GM 1500 series trucks is engineered with patented Reflective Sound Cancellation (RSC) technology to eliminate drone-inducing frequencies while delivering an aggressive exhaust note under acceleration. This system features a high-flow, straight-through muffler design to optimize airflow and minimize backpressure, providing a refined, quiet cabin experience at cruising speeds.

Built for long-term durability, the kit is constructed from premium 304 stainless steel to resist rust and oxidation in harsh environments. The dual rear exit configuration is finished with twin 4.0-inch Pro-Series tips, featuring dual-wall 304 stainless steel construction and a durable black powder coat. This system is a direct bolt-on upgrade that installs in approximately one hour using factory mounting points.

• 304 stainless steel construction for maximum corrosion resistance
• Patented RSC No-Drone Technology for a quiet in-cabin experience
• Straight-through muffler design maximizes exhaust flow
• Twin 4.0-inch black powder-coated Pro-Series tips with dual-wall protection
• Easy bolt-on installation; no welding or cutting required
• Made in the USA
• Backed by a Manufacturer Lifetime Warranty
• Manufacturer Part Number: 21202BPC-1

Fits 2020-2024 Cadillac CT5-V (3.0L).

The Corsa Xtreme Series Cat-Back Exhaust (MPN 21326CF) is engineered to unlock the acoustic potential of the Cadillac 3.0L Turbo engine without compromising cabin comfort. This system integrates seamlessly with the factory Cadillac Active Exhaust valve assembly, allowing drivers to retain full control over the exhaust volume via the vehicle's drive mode selector. By replacing the restrictive, crushed factory piping near the rear axles with a 3.0-inch double X-pipe, this system increases exhaust flow by 10% over the stock configuration.

Built from premium 304 stainless steel, the system features Corsa’s patented Reflective Sound Cancellation (RSC) technology. This design is specifically tuned to eliminate low-frequency resonance (drone) during cruising, ensuring a high-performance exhaust note only when you want it. The kit is finished with dual-walled 4.5-inch carbon fiber tips for a modern, high-end appearance and includes all hardware required for a direct bolt-on installation.

• 3.0-inch mandrel-bent 304 stainless steel construction
• Dual 4.5-inch carbon fiber twin tips with polished accents
• 10% increase in flow over the factory exhaust system
• Custom-tuned Xtreme sound profile (+5dB louder than stock)
• Retains factory active exhaust valve functionality
• Reflective Sound Cancellation (RSC) technology for a drone-free cruise
• Manufactured in the USA
• Manufacturer Part Number: 21326CF
• Warranty: Limited Lifetime (Exhaust), 5-Year (Valves)

Fits 2018-2023 Ford Mustang GT (5.0L).

Protect your Coyote engine from the performance-robbing effects of oil blow-by with the CORSA Performance oil catch can. This system is engineered to intercept gas, water, oil vapors, and particulates before they reach your intake manifold, effectively preventing carbon build-up on intake valves that can degrade engine efficiency over time. This vehicle-specific kit features a sophisticated multi-stage separation system utilizing internal chambers, baffles, and a bronze filter to ensure only clean air returns to the induction system.

• CNC-machined 6061 aluminum construction with a corrosion-resistant finish
• Multi-stage filtration system prevents oil re-entry into the intake path
• 3 oz. capacity reservoir with a knurled bottom for easy, tool-free removal and servicing
• OEM-style quick disconnect fittings and multi-ply reinforced automotive-grade hoses
• 11-gauge powder-coated aluminum brackets provide a secure, vibration-free mount
• Installs in 30 minutes or less using factory mounting points
• Manufacturer Part Number: CC0003
• Backed by a 1-year warranty

Fits 2021-2023 Ford F-150 models equipped with the 5.0L V8 engine, including King Ranch, Lariat, Platinum, SSV, Tremor, XL, and XLT trims.

Improve your truck's breathing with the Corsa Performance MaxFlow 5 Cold Air Intake. Engineered to reduce restriction and manage heat, this system replaces the factory intake with a 100% carbon fiber tube that resists heat soak while delivering a premium engine bay aesthetic. The system features a black powder-coated aluminum heat shield that seals against the hood to block hot engine bay air, ensuring a cooler, denser intake charge. For added protection, a carbon fiber rain guard is included to prevent water intrusion through hood vents.

This intake utilizes the MaxFlow 5 oiled cotton gauze filter, featuring five layers of high-quality textile media pleated between aluminum screens. This design offers up to 40,000 miles of service between cleanings while outflowing the stock intake by 16%. Installation is a straightforward bolt-on process that typically takes under an hour with no ECU tuning required.

• Dyno-proven gains of up to 19 HP and 28 lb-ft of torque
• 100% carbon fiber construction for maximum heat resistance and styling
• Includes MaxFlow 5 reusable 5-layer oiled cotton gauze filter
• Black powder-coated aluminum heat shield for thermal isolation
• Integrated carbon fiber rain guard for all-weather protection
• Premium multi-ply silicone hoses and heavy-duty T-bolt style clamps
• Limited Lifetime Warranty
• Manufacturer Part Number: 49150

Fits 2021-2023 Ford F-150 models (5.0L V8) including King Ranch, Lariat, Platinum, SSV, Tremor, XL, and XLT.

The Corsa Performance Cold Air Intake System is engineered to optimize airflow and maximize engine protection for the 5.0L F-150. By replacing the restrictive factory intake with a high-flow system, this kit increases overall performance while utilizing advanced filtration technology. The system features a smoked acrylic see-through airbox lid for easy filter inspection and a rugged design built to withstand demanding conditions, including dry off-road environments.

At the heart of this system is the Donaldson Powercore Ultra-Web air filter. This dry filtration technology is 99.96% efficient, providing superior protection against engine-damaging contaminants. Designed for long-term reliability, the Powercore filter offers up to 150,000 miles of maintenance-free operation under normal driving conditions.

• Direct bolt-on installation takes under one hour with standard hand tools
• Donaldson Powercore Ultra-Web technology provides 99.96% filtration efficiency
• Maintenance-free filtration for up to 150,000 miles
• Smoked acrylic airbox lid allows for quick visual filter checks
• Outflows stock intake systems for improved throttle response
• Rugged construction designed for off-road durability
• Made in the USA
• Manufacturer Part Number: 491506
• Lifetime Warranty

Fits 2023-2025 Chevrolet Corvette Z06.

The CORSA Performance C8 Z06 dual air intake is engineered from 100% multi-layer carbon fiber for a combination of high-strength durability and refined engine bay aesthetics. This dual-path system features optimized intake tube geometry and an improved airbox design to maximize airflow and performance compared to the factory intake. Dyno-tested results show gains of up to 33 HP at 4950 RPM and 35 lb-ft of torque at 4875 RPM without the need for an aftermarket tune.

Equipped with twin DryTech high-performance filters, this system provides 99% filtration efficiency to protect your engine while extending maintenance intervals up to 50,000 miles depending on driving conditions. The bolt-on design includes a black powdercoated aluminum heat shield, a machined black anodized MAF plate, and an integrated wire management system for a clean, professional installation that maintains factory-level fit and finish.

• 100% multi-layer carbon fiber construction for maximum strength and heat resistance
• Twin DryTech high-performance air filters for oil-free, high-flow filtration
• Black powdercoated aluminum heat shield and integrated wire management system
• Machined aluminum black anodized MAF plate
• No ECU tuning required
• 99% filtration efficiency with 50,000-mile maintenance intervals
• Limited Lifetime Warranty on intake; 1-year warranty on filters
• Manufacturer Part Number: 44012D

Fits 2017-2023 Chevrolet Camaro ZL1 (6.2L). This CORSA Performance Carbon Fiber air intake (MPN: 44005) is engineered for the supercharged LT4 engine, delivering a 16% increase in airflow over the factory system. Constructed from 100% genuine carbon fiber, this intake provides superior thermal properties to resist engine bay heat soak while enhancing engine bay aesthetics. This system is dyno-tuned to produce gains of up to 19 HP and 28 lb-ft of torque without requiring an aftermarket ECU tune.

The kit features the MaxFlow 5 re-usable 5-layer oiled cotton gauze air filter for high-performance filtration and maximum flow. To ensure long-term durability and performance, CORSA includes a specialized carbon fiber rain guard to shield the filter from water intrusion through the factory hood vents. Installation is straightforward, typically completed in under an hour using the included premium hardware.

• 100% carbon fiber ducting for maximum strength and heat resistance
• MaxFlow 5 re-usable 5-layer oiled cotton gauze high-flow air filter
• Black powder-coated aluminum heat shield for a flush seal against the hood
• Carbon fiber rain guard protects filter from water via hood vents
• Dyno-proven gains of up to 19 HP and 28 lb-ft of torque
• Outflows factory intake by 16%
• Includes multi-ply silicone hoses and heavy-duty T-bolt style clamps
• No tune required for operation
• Backed by a Limited Lifetime Warranty (1-year warranty on filters)

Fits 1997-2004 Chevrolet Corvette Base, Z06, and 50th Anniversary models (5.7L).

The Corsa Xtreme Axle-Back Exhaust System is engineered for Corvette owners seeking an aggressive exhaust note without the trade-off of cabin resonance. Featuring patented Reflective Sound Cancellation (RSC) technology, this system (MPN: 14961) is acoustically tuned to eliminate drone frequencies at cruising speeds while delivering a sharp, powerful sound under load. This system is significantly lighter than the factory components and outflows the stock exhaust by up to 70%, improving throttle response and efficiency.

Built from premium 304 stainless steel for long-term durability and corrosion resistance, the kit includes quad dual-walled polished stainless steel tips for a refined aesthetic. The bolt-on design allows for a straightforward installation to factory mounting points with no welding required.

• Patented RSC Technology ensures a drone-free cruise
• 304 stainless steel construction for maximum corrosion resistance
• 70% flow increase over stock Corvette exhaust
• Quad dual-walled polished stainless steel tips
• Lightweight design improves overall vehicle weight distribution
• Easy bolt-on installation with no welding necessary
• Made in the U.S.A.
• Limited Lifetime Warranty

Fits 2012-2014 Chrysler 300 SRT8 and Dodge Charger SRT8 (6.4L). This system replaces the restrictive factory exhaust with high-flow 304 stainless steel tubing and Corsa's signature acoustic engineering.

The Corsa Xtreme Cat-Back Exhaust system utilizes patented Reflective Sound Cancellation (RSC) technology to eliminate low-frequency resonance (drone) at cruising speeds while delivering an aggressive, high-performance exhaust note under acceleration. This 304 stainless steel system is engineered to flow 20% better than the stock assembly and reduces vehicle weight by 10 lbs. The direct bolt-on design ensures a precise fit to factory mounting points without the need for welding.

• Patented RSC Technology for a drone-free cabin experience
• Manufactured from premium 304 stainless steel for long-term durability
• Flows 20% better than the factory exhaust system
• Weight reduction of 10 lbs compared to OE components
• Easy bolt-on installation; no welding or cutting required
• Includes rectangular black-finished exhaust tips
• Manufacturer Part Number: 14464BLK
• Made in the U.S.A.

Fits 2014-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 (6.2L) Crew Cab/Double Cab models with Short or Standard beds. This Corsa Sport system is engineered to provide an aggressive exhaust note under acceleration while maintaining a drone-free experience during highway cruising.

Constructed from premium 304 stainless steel, this cat-back system (MPN 14866BLK) utilizes Corsa's patented Reflective Sound Cancellation (RSC) technology. This acoustic engineering targets and eliminates specific frequencies that cause interior cabin drone without restricting airflow. In fact, this system is designed to flow 400% better than the factory exhaust, enhancing overall performance while being lighter than the stock assembly.

• Patented No-Drone Reflective Sound Cancellation (RSC) technology
• Aggressive exhaust note under throttle; quiet at cruise
• Premium 304 stainless steel construction for maximum durability
• Dual-walled black stainless steel tips for a sleek, custom look
• Flows 400% better than stock exhaust systems
• Lighter than the factory exhaust assembly
• Easy bolt-on installation; no welding required
• Includes detailed printed instructions (full-color available online)
• Limited Lifetime Warranty
• Made in the U.S.A.

Fits 2024-2025 Ford Mustang Dark Horse (5.0L).

Unlock the signature sound and performance of the 7th Generation S650 with the Corsa 3.0-inch Valved Cat-Back Exhaust. Specifically engineered for the Coyote V8, this system features Corsa's proprietary Double Helixx X-Pipe and custom-tuned mufflers to deliver an aggressive exhaust note while maintaining complete control over your driving experience. The assembly includes Corsa-designed cast valve assemblies that are engineered to outperform and outlast the factory valves, ensuring long-term reliability for vehicles equipped with active exhaust.

Constructed from premium 304 stainless steel, this system resists corrosion and provides a 20% increase in flow over the stock exhaust. For the driver, Corsa integrates their best-in-class Reflective Sound Cancellation (RSC) technology, which targets and eliminates drone frequencies to ensure a quiet, comfortable cabin during highway cruising. The Xtreme sound profile provides a significant volume increase, measuring 8 decibels louder than the factory system under load.

• 3.0-inch mandrel-bent 304 stainless steel construction
• Twin 4.5-inch dual-wall Black PVD stainless steel slash-cut tips
• Corsa Double Helixx Dual Crossover X-Pipe for improved scavenging
• Patented RSC No-Drone Technology for a drone-free cruise
• Ground-up engineered cast valve assemblies for active exhaust integration
• Direct bolt-on installation; typically installs in approximately 1 hour
• Proudly manufactured in the USA
• Manufacturer Part Number: 21265BLK
• Backed by a Limited Lifetime Warranty

Fits select 2021-2023 Chevrolet Tahoe and GMC Yukon 4DR 4WD models (6.2L).

The Corsa Sport Cat-Back Exhaust System (MPN 21129BLK) is engineered to deliver a deep, aggressive exhaust note without the interior cabin drone. Utilizing patented Reflective Sound Cancellation (RSC) technology, Corsa engineers target and eliminate specific frequencies that cause resonance, providing a comfortable cruise while maintaining a high-performance sound under acceleration.

Constructed from premium 304 stainless steel, this system features computerized mandrel-bent 3-inch to 2.75-inch tubing for maximum exhaust flow. The straight-through design is dyno-proven to unlock up to 20% additional horsepower and torque over the factory system. The installation is finished with twin 4.0-inch black stainless steel dual-wall Pro Series tips, providing a custom aesthetic that fits the factory rear exit points.

• Patented No-Drone Reflective Sound Cancellation (RSC) technology
• Sport sound level delivers a deep, aggressive rumble
• 304 stainless steel construction for maximum corrosion resistance
• 3.0-inch to 2.75-inch mandrel-bent tubing for optimized airflow and performance
• Twin 4.0-inch black dual-wall Pro Series tips
• Simple bolt-on installation; no cutting or welding required
• Manufacturer Part Number: 21129BLK
• Made in the USA
• Limited Lifetime Warranty

Fits 2017-2020 Ford F-150 Raptor (3.5L).

Enhance your Raptor's performance and acoustic profile with the Corsa Sport Cat-Back exhaust system (MPN: 14397). Engineered for a balance of aggressive external sound and interior comfort, this system utilizes Corsa’s patented Reflective Sound Cancellation (RSC) technology. This acoustic engineering eliminates low-frequency resonance, ensuring a completely drone-free experience at cruising speeds without sacrificing power gains.

Constructed from premium 304 stainless steel, this exhaust is built to withstand the rigors of off-road use. The system features 3-inch tailpipes designed with strategic clearance and integrated heat shields to protect sensitive underbody components. The 5-inch dual-walled satin polished tips provide a refined, rugged aesthetic. Installation is a direct bolt-on process, requiring no cutting or welding to factory mounting points.

• Patented RSC Technology for a drone-free cruise
• Flows 11.15% better than the factory exhaust
• Weight reduction of 9 lbs compared to stock
• Durable 304 stainless steel construction
• 3-inch tailpipes with integrated heat shielding
• Dual 5-inch satin polished stainless steel tips
• Easy bolt-on installation; no welding required
• Made in the U.S.A.
• Manufacturer Part Number: 14397

Fits 2020-2023 Chevrolet Corvette Stingray models.

The CORSA Performance C8 Corvette air intake is engineered from 100% carbon fiber to provide maximum strength and thermal efficiency. By optimizing the internal geometry of the intake tract and utilizing high-performance filtration, this system delivers dyno-proven gains of up to 14 HP and 13 lb-ft of torque from the LT2 engine without requiring an ECU tune. This kit features DryTech filtration media, which provides superior air flow and filtration efficiency while extending maintenance intervals up to 50,000 miles depending on driving conditions.

• 100% carbon fiber construction for superior aesthetics and heat management
• Delivers gains of up to 14 HP and 13 lb-ft of torque
• DryTech filter media ensures reduced maintenance and high airflow
• Machined black anodized aluminum MAF mounting bracket for precision fitment
• Integrated aluminum heat shield protects the carbon fiber assembly
• Includes premium T-bolt clamps and black screw hardware
• Bolt-on installation with no tuning required
• Manufacturer Part Number: 44003D

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, and ZR1 (6.2L).

The CORSA Performance C7 carbon fiber air intake system replaces the restrictive factory airbox with a high-flow, thermally efficient housing designed for maximum performance. Constructed from 100% pure red carbon fiber, this intake combines lightweight structural rigidity with a premium aesthetic. The optimized internal geometry is dyno-tuned to deliver gains of up to 15 HP and 15 lb-ft of torque on the LT1 engine without requiring an aftermarket ECU tune.

This kit features the DryTech non-oiled filter, providing high-capacity filtration and simplified maintenance. Each system includes a precision-machined black anodized aluminum MAF mounting bracket to ensure accurate sensor readings and factory-level fitment. Designed as a direct bolt-on solution, the intake can be installed in under an hour using the included premium hardware.

• Fits 2014-2019 Corvette Stingray, Grand Sport, and ZR1 models
• 100% pure red carbon fiber construction for superior heat rejection
• DryTech non-oiled high-performance synthetic filter
• Machined black anodized aluminum MAF mounting bracket
• Estimated gains of up to 15 HP and 15 lb-ft TQ
• No ECU recalibration or tune required
• Direct bolt-on installation with all hardware included
• Manufacturer Part Number: 44001D-R
• Limited Lifetime Warranty (1-year filter warranty)

Fits 2019-2023 Ram 1500 models including Big Horn, Laramie, Limited, Rebel, and Tradesman (5.7L V8).

Designed to optimize airflow and engine protection, the CORSA Performance Cold Air Intake replaces the restrictive factory system with a high-flow induction solution. This system features Donaldson PowerCore Ultra-Web filtration technology, providing 99.96% efficiency and an industry-leading maintenance-free interval of up to 150,000 miles. The rugged airbox construction is engineered to shield the filter from engine heat and environmental debris, while the smoked acrylic see-through lid allows for easy filter inspection without disassembly.

• Donaldson PowerCore Ultra-Web dry filtration (99.96% efficient)
• Up to 150,000-mile maintenance-free filtration interval
• Smoked acrylic see-through airbox lid for easy monitoring
• Rugged airbox design protects filter from engine bay heat
• Easy bolt-on installation; typically installs in under one hour
• Made in the USA
• Manufacturer Part Number: 465576-1
• Lifetime Warranty

Fits select 2014-2020 Chevrolet Silverado 1500/1500 LD, Suburban, Tahoe and GMC Sierra 1500/1500 Limited, Yukon, and Yukon XL (5.3L / L83-5.3L).

The Corsa Performance cold air intake system is designed to maximize airflow and engine efficiency by replacing restrictive factory components with a high-flow, heat-resistant induction setup. Engineered from rugged crosslinked polyethylene, the enclosed airbox and intake ducting resist heat soak to ensure cooler, denser air reaches the L83 engine. This system features Corsa's signature smoked acrylic lid, providing a clear window for filter inspection without disassembly.

• DryTech no-oil synthetic air filter provides 98% filtration efficiency and maximum airflow.
• Reusable filter media offers up to 40,000 miles of maintenance-free driving under normal conditions.
• Fully enclosed airbox protects the intake charge from hot engine bay air.
• Durable crosslinked polyethylene construction for long-term structural integrity.
• Complete bolt-on installation typically takes under one hour with no ECU tuning required.
• Made in the USA and backed by a manufacturer's Lifetime Warranty.
• Manufacturer Part Number: 45553D-1

Fits select 2015-2019 Chevrolet Corvette Stingray and 2017-2019 Grand Sport (6.2L LT1).

Upgrade your C7 induction system with the CORSA Performance Carbon Fiber Air Intake. Engineered from 100% carbon fiber, this intake replaces the restrictive factory airbox with an optimized shape designed for maximum strength and thermal efficiency. The system is dyno-tuned to deliver substantial gains of up to 44 HP and 70 lb-ft of torque on the LT1 engine without requiring an ECU reflash.

This kit features the DryTech 3D non-oiled filtration system, offering high-capacity airflow and simplified maintenance. The assembly includes a precision-machined black anodized aluminum MAF mounting bracket to ensure accurate sensor readings and a direct bolt-on installation that fits factory mounting points.

• 100% Carbon Fiber construction for maximum strength and heat resistance
• DryTech 3D high-performance non-oiled synthetic filter
• Machined black anodized aluminum MAF mounting bracket
• Up to 44 HP and 70 lb-ft Torque increase (No Tune Required)
• Direct bolt-on installation replaces factory components in minutes
• Manufacturer Part Number: 44002D
• Limited Lifetime Warranty on intake; 1-year warranty on filter

Fits 2009-2013 Chevrolet Corvette Base, Grand Sport, and ZR1 models (6.2L).

The Corsa Xtreme Axle-Back Exhaust is engineered to provide an aggressive, high-performance exhaust note under acceleration without the common drawback of interior cabin drone. Utilizing patented Reflective Sound Cancellation (RSC) technology, Corsa's engineers target and eliminate specific frequencies that cause resonance at cruising speeds, ensuring a refined experience inside the cockpit while maintaining a powerful exterior sound.

Constructed from premium 304 stainless steel, this system increases exhaust flow by 35% over the factory setup, improving efficiency and performance. The system is finished with massive 4.5-inch dual-walled black PVD stainless steel tips for a bold, custom look that resists discoloration. This is a direct bolt-on kit that requires no welding for installation.

• Manufacturer Part Number: 21012BLK
• Patented No-Drone Reflective Sound Cancellation (RSC) Technology
• 304 Stainless Steel construction for maximum durability
• Dual-walled 4.5-inch Black PVD stainless steel tips
• Flows 35% better than the stock exhaust system
• Direct bolt-on installation; no welding required
• Made in the U.S.A.
• Replaces manufacturer part number 14959

Fits 2011-2014 Ford F-150 models including SVT Raptor, Lariat, Platinum, FX2, FX4, Harley-Davidson Edition, and XLT (6.2L V8).

Improve your engine's breathing and efficiency with the CORSA Performance Cold Air Intake system. This intake is specifically engineered to maximize air volume through sculpted ducts with larger diameters, unique bends, and smooth transitions that eliminate the restrictive nature of the factory setup. The included closed airbox design is critical for thermal management, isolating the filter from engine bay heat to ensure a cooler, denser air charge enters the combustion chamber.

At the heart of this system is the Donaldson PowerCore Filter, which utilizes specialized channels to trap dust and contaminants with high efficiency while maintaining superior airflow. This dry filtration technology requires no oiling and no cleaning, offering a service life of up to 150,000 miles or 4 years under normal driving conditions.

• Air Filtration: Maintenance-free Donaldson PowerCore filter uses dry media to optimize performance without oil.
• Heat Management: Enclosed filter box minimizes hot air intake for improved engine efficiency.
• Durable Components: High-performance silicone connectors provide flexibility and thermal stability; marine-grade clamps ensure secure seals.
• Installation: Includes all necessary hardware for a complete bolt-on installation.
• Origin: Made in the U.S.A.
• MPN: 44388
• Warranty: Limited Lifetime Warranty.

Fits 2015-2019 Chevrolet Corvette Stingray and 2017-2019 Corvette Grand Sport models. This Corsa Performance carbon fiber air intake is engineered to maximize airflow while delivering an aggressive engine note and premium under-hood aesthetics.

Constructed from 100% genuine carbon fiber, this intake system (MPN 44002) optimizes airflow paths to significantly reduce restriction compared to the factory assembly. The included MaxFlow 5 oiled cotton gauze filter uses five layers of high-performance media to capture contaminants while maintaining high flow rates. Dyno-tested for the LT-1 engine, this bolt-on upgrade provides gains of up to 44 HP and 70 lb-ft of torque without requiring an aftermarket ECU tune.

• Material: 100% Carbon Fiber construction for maximum strength and heat resistance
• Filtration: High-flow 5-layer oiled cotton gauze MaxFlow 5 filter
• MAF Housing: Precision-machined black anodized aluminum MAF mounting bracket
• Performance: Up to 44 HP and 70 lb-ft TQ increase (results based on LT-1 engine)
• Installation: Direct bolt-on design replaces factory components in minutes
• Tuning: Optimized shape allows for maximum results without a tune
• Warranty: Limited Lifetime Warranty on intake assembly; 1-year warranty on filter

Fits 2023-2025 Ford F-150 (5.0L) including Tremor, XL, XLT, STX, Lariat, King Ranch, Platinum, SSV, Raptor, and Police Responder models.

The Corsa Performance Xtreme Cat-Back Exhaust system (MPN 21183BLK) is custom-tuned specifically for the Ford 5.0L V8 engine to deliver an aggressive, intoxicating exhaust note upon cold start and under heavy acceleration. This system features Corsa’s best-in-class Reflective Sound Cancellation (RSC) technology, engineered to provide an aggressive exterior sound while maintaining a completely drone-free experience inside the cabin at cruising speeds.

Manufactured from premium 304 stainless steel, this 3.0-inch to 2.75-inch dual-exit system is built to withstand a lifetime of use. The Xtreme configuration outperforms the stock setup by providing up to an 18% increase in airflow and reducing vehicle weight by approximately 10 lbs. The system is finished with dual 4.0-inch straight-cut, dual-wall tips featuring a high-durability Black PVD finish for a modern, stealthy aesthetic.

• Fits 5.0L V8 Ford F-150 SuperCrew with 5.5ft bed
• Xtreme Sound Level: 13 decibels louder than the factory system
• Outflows stock exhaust by up to 18% for improved engine efficiency
• RSC technology eliminates highway drone for a quiet cabin cruise
• 304 stainless steel construction for maximum corrosion resistance
• Two 4.0-inch dual-wall Black PVD stainless steel tips
• Easy bolt-on installation; typically installs in 1 hour or less
• Manufacturer Part Number: 21183BLK
• Made in the USA and backed by a Limited Lifetime Warranty

Fits 2021-2025 Ford F-150 Regular Cab models with a 6.5-foot bed (5.0L V8).

Give your V8-powered F-150 the most aggressive acoustic profile available with the CORSA Performance Xtreme Series cat-back exhaust. Engineered specifically for the 5.0L displacement, this system features 3.0-inch mandrel-bent 304 stainless steel construction and CORSA’s patented Reflective Sound Cancellation (RSC) technology. This design targets and eliminates the specific low-frequency sound waves that cause cabin drone at cruise, providing a quiet interior environment while delivering a high-volume, performance-oriented exhaust note under acceleration and cold starts.

The single side-exit system is finished with a premium dual-walled exhaust tip featuring a Black PVD coating for superior heat and corrosion resistance. This bolt-on kit replaces the factory exhaust with high-flow stainless steel for maximum durability and a precise fit using existing factory mounting points.

• Xtreme Sound Level: CORSA's loudest and most aggressive exterior exhaust note.
• No-Drone RSC Technology: Patented Reflective Sound Cancellation eliminates resonance at highway speeds.
• Premium Construction: High-quality 3.0-inch 304 stainless steel prevents corrosion and ensures longevity.
• Direct Fit: Straightforward bolt-on installation; no welding required.
• Black PVD Finish: Includes a dual-walled stainless steel tip with a durable black finish.

• Manufacturer Part Number: 21142BLK
• Material: 304 Stainless Steel
• Tubing Diameter: 3.0 in.
• Exit Style: Single Side Exit
• Warranty: Limited Lifetime Warranty
• Manufacturing: Made in the USA

Fits select 2021-2025 Chevrolet Suburban, Tahoe, and GMC Yukon / Yukon XL models (5.3L).

The Corsa Sport Cat-Back exhaust system is engineered to provide an aggressive sound profile under acceleration while maintaining a drone-free experience during cruising. Utilizing Corsa’s patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates the specific frequencies that cause cabin drone without restricting exhaust flow. The straight-through design features computerized mandrel-bent 3-inch to 2.75-inch tubing to maximize airflow and optimize performance for the 5.3L GM SUV platform.

• Construction: High-quality 304 stainless steel for superior corrosion resistance.
• Technology: Patented Reflective Sound Cancellation (RSC) for a drone-free cabin.
• Tips: Twin 4.0-inch dual wall Pro Series stainless steel tips with a black finish.
• Installation: Direct bolt-on design; no cutting or welding required for an estimated 1-hour install.
• Performance: Straight-through design minimizes backpressure and improves flow.
• Origin: Manufactured in the USA.
• Warranty: Limited Lifetime Warranty.
• Manufacturer Part Number: 21128BLK

Fits 2018-2023 Dodge Durango SRT Hellcat and Jeep Grand Cherokee Trackhawk (6.2L).

The CORSA Performance carbon fiber cold air intake (MPN 44011D) is engineered to maximize airflow and intake aesthetics for supercharged 6.2L HEMI applications. Featuring an oversized, dual-layer carbon fiber air duct and a matching carbon fiber heat shield, this system streamlines air delivery from the stock hood air passage and grille while effectively shielding the intake from radiant engine bay heat. This design increases supercharger whine and delivers dyno-proven performance gains of up to 14 horsepower and 13 lb-ft of torque.

This kit includes the low-maintenance DryTech 3D synthetic filter, which requires no oil and provides high-flow filtration with high dust-holding capacity. The system is built with premium components, including multi-ply silicone hoses and heavy-duty T-bolt style hose clamps for a secure, leak-free fit. Installation is a direct bolt-on process that typically takes under an hour and requires no aftermarket ECU tuning.

• Dyno-proven gains: +14 HP and +13 lb-ft of Torque
• Oversized dual-layer carbon fiber air duct for maximum volume
• Full carbon fiber heat shield funnels cool air and blocks engine heat
• DryTech 3D non-oiled synthetic high-flow air filter
• Includes multi-ply silicone hoses and stainless T-bolt clamps
• Direct bolt-on installation; no tune required
• Manufacturer Part Number: 44011D
• Limited Lifetime Warranty (1-year on filter)

Fits 2018-2021 Jeep Grand Cherokee Trackhawk and 2021-2023 Dodge Durango SRT Hellcat (6.2L).

Upgrade your supercharged HEMI with the CORSA Performance carbon fiber cold air intake, engineered for maximum airflow and superior heat management. This system features an oversized, dual-layer carbon fiber air duct and a vehicle-specific heat shield designed to integrate seamlessly with the factory hood air passage and grille. By streamlining air delivery and shielding the intake from ambient engine bay heat, this system provides your 6.2L V8 with the massive volume of cool, dense air required for peak performance.

The optimized intake geometry and high-performance MaxFlow 5 oiled filtration not only increase horsepower but also enhance the signature supercharger whine, providing a more connected driving experience. Dyno-tuned for precision results, this intake unlocks proven power gains while maintaining an high-end aesthetic under the hood.

• Unlocks gains of up to 14 HP and 13 lb-ft of torque
• Oversized dual-layer carbon fiber duct for weight savings and thermal resistance
• Engineered heat shield funnels water and debris away from the filter element
• Includes MaxFlow 5 reusable oiled cotton gauze air filter
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 44011
• Limited Lifetime Warranty (1-year warranty on filter)

The Corsa Performance PRO-Series Tuned Muffler (MPN: CPX3030) is a premium exhaust solution engineered specifically for custom fabrication and classic muscle restorations. Constructed from high-grade 304 stainless steel, this muffler incorporates patented No Drone RSC® (Reflective Sound Cancellation) technology, which targets and eliminates the specific frequencies that cause cabin drone in V8 engines without restricting flow or muffling performance sound.

Designed for versatility in custom builds, the CPX3030 features an integrated cross-flowing X-pipe and supports both longitudinal and transverse flow orientations. This dual 3.0-inch inlet/outlet configuration allows for optimized scavenging and an aggressive exhaust note that remains comfortable at cruising speeds.

• Patented RSC® Technology for a drone-free cabin experience
• Integrated cross-flowing X-pipe design
• 304 stainless steel construction for maximum corrosion resistance
• 3.0-inch dual inlet and dual outlet configuration
• Compatible with longitudinal or transverse flow layouts
• Overall Length (OAL): 22.25 inches
• Manufacturer Part Number: CPX3030
• Made in the USA and backed by a Limited Lifetime Warranty

Fits 2018-2023 Ford Mustang GT (5.0L).

The CORSA Performance Cold Air Intake System is engineered to maximize airflow while providing superior engine protection. This system replaces the restrictive factory airbox with a high-flow design that outflows stock units, delivering measurable performance improvements for your S550 Mustang. It features a specialized smoked acrylic airbox lid, allowing for easy visual inspection of the filter while shielding it from engine bay heat and debris.

This intake is equipped with CORSA's DryTech 3D filtration technology. This high-flow, non-oiled synthetic filter provides nearly 98% efficiency and requires minimal maintenance—simply vacuum the surface or rinse with soap and water. With service intervals up to 50,000 miles, it offers a long-lasting, low-hassle solution for both daily driving and performance applications.

• DryTech 3D high-flow, no-oil synthetic filter
• Smoked acrylic see-through airbox lid for easy inspection
• Engineered to outflow stock air intake systems
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 419850D
• Limited Lifetime Warranty
• Made in the USA

Fits 2018-2021 Jeep Grand Cherokee Trackhawk and 2021-2024 Dodge Durango SRT Hellcat (6.2L).

The CORSA Performance matte forged carbon fiber cold air intake is engineered for high-performance HEMI applications, matching the aesthetics of premium optional forged carbon trim packages. This system features an oversized, dual-layer carbon fiber air duct and a specialized heat shield designed to streamline air delivery from the factory hood passage and grille while shielding the intake from engine heat. The shield's geometry is specifically tuned to funnel water and debris away from the filter element, ensuring a clean, cool charge for the supercharger.

This system (MPN 44011D-MF) is dyno-tuned to unlock an additional 14HP and 13 lb-ft of torque from the 6.2L supercharged V8 while enhancing supercharger whine. Installation is straightforward, typically requiring less than one hour with no aftermarket tuning required.

• Dyno-proven gains of up to 14HP and 13 lb-ft of torque
• Matte forged, dual-layer carbon fiber oversized air duct
• Full carbon fiber heat shield protects against heat soak and debris
• Includes low-maintenance DryTech 3D synthetic, no-oil, high-flow air filter
• Premium multi-ply silicone hoses and T-bolt style hose clamps included
• Manufacturer Part Number: 44011D-MF
• Limited Lifetime Warranty (1-year warranty on filter)

Fits 2019-2023 Ram 1500 models equipped with the 5.7L engine. This CORSA Performance Cold Air Intake (MPN 46557-1) is engineered to maximize airflow and optimize engine performance. By replacing the restrictive factory induction system, this intake improves flow while providing superior engine protection. It features a MaxFlow 5 oiled filter, constructed with five layers of high-quality cotton gauze pleated between durable aluminum screens to ensure maximum air volume and long service intervals.

• MaxFlow 5 oiled filter provides high flow rates and up to 40,000 miles between cleanings.
• Rugged airbox design protects the filter from heat and environmental debris.
• Integrated smoked acrylic see-through lid allows for quick filter inspections.
• Direct bolt-on installation requires no permanent modifications and installs in under an hour.
• Proudly manufactured in the USA.
• Backed by a manufacturer's Lifetime Warranty.

Each kit includes the high-flow airbox, MaxFlow 5 oiled filter, smoked acrylic lid, and all necessary hardware for a complete installation.