Fits 2008-2025 Chevrolet Corvette Base, Grand Sport, Stingray, Z06, and ZR1 equipped with factory NPP exhaust systems.

The CORSA Performance Muffler Delete NPP & AFM Cat-Back Exhaust System is engineered for drivers seeking the most aggressive acoustic profile available without sacrificing modern valve functionality. This 3.0-inch system replaces the restrictive factory mufflers to maximize weight savings and exhaust flow, while the Corsa-engineered cast valve assemblies maintain full compatibility with both NPP (dual-mode) and AFM (active fuel management) systems. This ensures a drone-free cruising experience and prevents check engine lights (CEL) after a proper valve re-learn sequence.

Constructed from premium 304 stainless steel, this mandrel-bent system is track-tested and dyno-proven to deliver significant performance gains. By reducing backpressure and shedding nearly 20 pounds of dead weight compared to the OE exhaust, this kit provides a tangible improvement in throttle response and vehicle dynamics.

• Performance Gains: Up to 18 HP and 16 lb-ft of torque
• Weight Savings: Nearly 20 lbs lighter than the factory exhaust
• Sound Profile: 15 decibels louder than stock with aggressive cold starts
• Tip Design: Quad 4.5-inch Black PVD Pro Series dual-wall tips
• Valve Retention: Maintains NPP sound control and AFM cylinder-deactivation functionality
• Construction: 3.0-inch 304 stainless steel with mandrel bends
• Manufacturer Part Number: 21106BLK

Fits 2020-2025 Chevrolet Corvette Stingray models. This Corsa Performance Track Series cat-back exhaust system is engineered for drivers seeking the most aggressive sound profile and maximum weight reduction for the C8 platform. By utilizing a straight-through 3.0-inch path that deletes the stock AFM (Active Fuel Management) valves, this system provides an unrestricted exhaust note that is 13 decibels louder than the factory setup.

• Dyno-proven gains of up to 19 HP and 16 lb-ft of torque
• Saves 27 lbs compared to the heavy OEM exhaust assembly
• Constructed from premium 3.0-inch 304 stainless steel for maximum corrosion resistance
• Includes machined AFM valve simulator brackets to ensure proper actuator alignment and prevent ECU errors
• Features quad 4.5-inch black Pro Series dual-wall tips for a bold, track-ready aesthetic
• Xtreme sound level: Corsa's most aggressive tone with no restrictions
• Handcrafted in the USA and backed by a lifetime warranty
• All necessary installation hardware included (MPN: 21104BLK)

Fits 2020-2025 Chevrolet Corvette Stingray models. This Corsa Performance Xtreme Series cat-back exhaust is engineered for C8 owners seeking an ultra-aggressive exhaust note while maintaining drivability during 4-cylinder economy mode. By integrating Corsa's bolt-on C8-spec cast AFM valve assemblies, this system effectively eliminates the resonance typically associated with cylinder deactivation without sacrificing the raw, high-volume sound of the Xtreme sound level.

Constructed from premium 3.0-inch 304 stainless steel, this exhaust system is designed for maximum flow and significant weight reduction, shedding 25 pounds compared to the factory unit. The system is finished with massive 4.5-inch black Pro Series dual-wall quad tips for a bold, track-inspired aesthetic. This cat-back has been track-tested and dyno-proven to deliver performance gains of up to 19 HP and 16 lb-ft of torque.

• Manufacturer Part Number: 21102BLK
• System Diameter: 3.0-inch
• Tip Specification: 4.5-inch Black Quad Tips (Dual Wall)
• Sound Level: Xtreme (+13 decibels over stock)
• Material: 304 Stainless Steel
• Weight Savings: 25 lbs lighter than OEM
• Performance Gains: Up to 19 HP and 16 lb-ft Torque
• Hardware: Includes all necessary installation hardware
• Integration: Retains factory AFM valve functionality
• Warranty: Lifetime Exhaust; 5-Year Valve
• Origin: Made in the USA

Fits 2020-2025 Chevrolet Corvette Stingray (6.2L) equipped with factory Performance Exhaust and AFM.

The Corsa Performance 4 Valve NPP Exhaust system provides total acoustic control for the C8 Corvette. This 3.0-inch valved cat-back system utilizes Corsa’s patented Reflective Sound Cancellation (RSC®) No Drone Technology, ensuring a refined cabin experience during cruising while delivering an aggressive, high-performance exhaust note under load. The system is engineered to toggle seamlessly between Sport and Xtreme sound levels, maintaining all factory-integrated sound modes.

Built to handle the intense heat of the C8’s mid-engine configuration, this exhaust features Corsa’s exclusive cast AFM and NPP active valve assemblies. These components bolt directly to the factory actuator motors for perfect ECM integration, ensuring no Check Engine Light (CEL) codes follow the valve relearn sequence. Manufactured in the USA from premium 304 stainless steel, this system is 13 pounds lighter than the factory exhaust and provides dyno-proven performance gains.

• Performance Gains: Up to +19 HP and +16 lb-ft Tq over factory performance exhaust
• Weight Reduction: 13 lbs lighter than stock
• Sound Levels: +9 decibels (Louder) and -1 decibel (Quieter) than factory valved system
• Construction: 3.0-inch 304 Stainless Steel
• Tip Style: 4.5-inch Black Quad Tips
• Hardware: Includes Corsa spec cast AFM and NPP active valve assemblies
• Warranty: Lifetime Exhaust; 5-Year Valve Warranty
• Manufacturer Part Number: 21100BLK

Fits 2018-2023 Ford Mustang GT and GT Premium (5.0L) Fastback models.

The Corsa 3-inch Cat-Back Exhaust System (MPN: 21001GNM) is engineered to deliver a custom-tuned exhaust note for your 5.0L Mustang GT, ranging from Touring to Xtreme. Constructed from premium 304 stainless steel, this system maximizes exhaust flow and durability. Performance testing indicates this system flows 17% better than stock with valves open and 28% better with valves closed, all while maintaining the vehicle's factory Quiet Start functionality.

The dual rear exit design features aggressive 4-inch dual-walled gunmetal PVD stainless steel tips for a high-end finish. This system is a direct bolt-on replacement for the factory exhaust, requiring no welding for installation. Every kit includes detailed instructions and all necessary hardware for a straightforward upgrade.

• 3.0-inch mandrel-bent 304 stainless steel construction
• 4.0-inch dual-walled gunmetal PVD stainless steel tips
• 17% flow increase (Open Valve) / 28% flow increase (Closed Valve) over OE
• Maintains factory Quiet Start functionality
• Custom-tuned exhaust note from Touring to Xtreme
• Direct bolt-on installation; no welding required
• Made in the U.S.A.
• Manufacturer Part Number: 21001GNM
• Limited Lifetime Warranty

Fits 2018-2023 Ford Mustang GT and GT Premium Fastback models equipped with the 5.0L engine.

This Corsa 3-inch cat-back exhaust system is engineered to maximize exhaust flow while maintaining complete control over your Mustang's acoustic profile. Constructed from premium 304 stainless steel, this system utilizes mandrel-bent tubing to achieve significant flow improvements over the factory exhaust—delivering 17% better flow with valves open and a substantial 28% improvement when closed. The design is specifically tuned to retain the vehicle's Quiet Start functionality while offering an exhaust note that ranges from Touring to Xtreme under load.

Installation is a straightforward, bolt-on process that utilizes factory mounting points, requiring no welding or permanent vehicle modifications. The system is finished with quad 4-inch dual-walled black tips for a refined, aggressive aesthetic that resists heat discoloration.

• System Diameter: 3.0-inch
• Tip Size: 4.0-inch Dual-Walled Black Tips
• Exit Style: Dual Rear Exit
• Material: 304 Stainless Steel
• Performance: Up to 28% flow increase over stock
• Installation: Bolt-on; no welding required
• Warranty: Limited Lifetime Warranty
• Manufacturing: Made in the U.S.A.
• Manufacturer Part Number: 21001BLK

Fits 2018-2023 Ford Mustang GT and GT Premium Fastback models (5.0L).

This Corsa Performance 3-inch cat-back exhaust system (MPN: 21001) is engineered specifically for the S550 Mustang GT to provide a significant increase in flow while maintaining the vehicle's factory active valve functionality. Constructed from premium 304 stainless steel, this system features mandrel-bent tubing to eliminate restrictions and provide a custom-tuned exhaust note that ranges from Touring to Xtreme. The dual rear exit design is finished with 4-inch dual-walled polished stainless steel tips for a refined, aggressive look.

• 304 stainless steel construction for maximum corrosion resistance
• 3-inch mandrel-bent piping maximizes exhaust gas velocity
• Maintains factory Quiet Start functionality and active valve control
• Flows 17% better than stock with valves open and 28% better with valves closed
• Direct bolt-on installation with no welding required
• Dual-walled 4-inch polished stainless steel tips
• Includes detailed full-color printed instructions
• Manufactured in the USA
• Manufacturer Part Number: 21001

Fits 1997-2004 Chevrolet Corvette Base, Z06, 50th Anniversary Edition, and Indianapolis 500 Pace Car models (5.7L V8).

The Corsa Xtreme Cat-Back Exhaust system with integrated XO-pipe is engineered to deliver an aggressive, high-performance exhaust note for the C5 Corvette without the cabin resonance typical of aftermarket systems. Utilizing Corsa's patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates drone-inducing frequencies during cruising, ensuring a comfortable interior environment while maintaining a raw, powerful sound under acceleration.

Constructed entirely from premium 304 stainless steel, this system provides superior corrosion resistance and a significant weight reduction compared to the factory exhaust components. The precise bolt-on design allows for a straightforward installation using existing factory mounting points, requiring no welding or permanent vehicle modifications.

• Series: Xtreme Cat-Back + XO Exhaust
• Material: 304 Stainless Steel
• Finish: Polished
• Technology: Patented No-Drone RSC (Reflective Sound Cancellation)
• Installation: Bolt-on design; no welding required
• Weight: Lighter than factory OE system
• Origin: Made in the U.S.A.
• Manufacturer Part Number: 14962

Each kit includes the full exhaust assembly, all necessary hardware, and detailed instructions for a complete installation.

Fits 2010-2013 Chevrolet Camaro SS Convertible models equipped with the 6.2L V8 engine and manual transmission.

The Corsa Sport Cat-Back Exhaust system (MPN: 14954) with integrated XO-Pipe is engineered to deliver an aggressive exterior sound profile without sacrificing interior comfort. Utilizing patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates the low-frequency resonant frequencies that cause cabin drone during cruising. The result is a refined experience at highway speeds and a powerful, high-performance growl under heavy throttle.

Built for durability and flow, the system is constructed from premium 304 stainless steel with mandrel-bent tubing to reduce backpressure. The bolt-on design ensures a precision fit to factory mounting points, requiring no welding for installation. Each kit comes complete with polished tips and all necessary hardware for a professional-grade upgrade.

• Patented RSC Technology ensures a drone-free experience at cruise
• 304 stainless steel construction for superior corrosion resistance
• Custom-tuned aggressive Sport exhaust note
• Includes XO-Pipe for improved flow and balance
• Direct bolt-on installation; no welding required
• Lighter than the factory exhaust system
• Made in the U.S.A.
• Manufacturer Part Number: 14954

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1 (6.2L).

The Corsa Xtreme Valve-Back exhaust system (MPN 14776) is engineered for C7 Corvette owners seeking the most aggressive acoustic profile available without the nuisance of interior cabin drone. This 2.75-inch system utilizes Corsa's patented Reflective Sound Cancellation (RSC) technology, which allows engineers to isolate and eliminate drone-inducing frequencies while maintaining a deep growl at idle and a high-performance scream under heavy acceleration.

This system is designed specifically to work with vehicles equipped with dual NPP valves, ensuring compatibility with factory exhaust modes. Please note that the Xtreme sound level is recommended for stock or lightly modified vehicles and may be excessively loud on highly modified applications.

• System Type: Valve-Back
• Series: Xtreme (Most Aggressive Sound)
• Piping Diameter: 2.75-inch
• Technology: Patented Reflective Sound Cancellation (RSC)
• Compatibility: Retains Dual NPP valve functionality
• Construction: Premium stainless steel for corrosion resistance
• Manufacturer Part Number: 14776

Fits 2015-2019 Chevrolet Corvette Stingray, Grand Sport, Z06, and ZR1.

The Corsa Xtreme Axle-Back Exhaust system (MPN: 14766BLK) is engineered to provide an aggressive exhaust note under acceleration without the cabin drone typically associated with high-performance systems. Utilizing patented Reflective Sound Cancellation (RSC) technology, Corsa engineers target and eliminate specific frequencies to ensure a comfortable interior experience during highway cruising.

Constructed from premium 304 stainless steel, this 3-inch system features dual-walled 4.5-inch black quad tips for a bold, custom aesthetic. The bolt-on design ensures a straightforward installation process using factory mounting points, requiring no welding or permanent vehicle modifications. This system is lighter than the factory exhaust and optimized for improved flow.

• System Type: Axle-Back Exhaust
• Series: Xtreme
• Piping Diameter: 3.0 in.
• Tip Description: 4.5 in. Black Quad Tips (Dual Walled)
• Material: 304 Stainless Steel
• Technology: Patented RSC No-Drone Technology
• Installation: Easy Bolt-On; No Welding Required
• Origin: Made in the U.S.A.
• Manufacturer Part Number: 14766BLK

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1 (6.2L).

The Corsa Xtreme Valve-Back exhaust system is engineered to deliver an aggressive, high-performance exhaust note under acceleration while maintaining a completely drone-free experience at cruising speeds. Utilizing patented Reflective Sound Cancellation (RSC) technology, Corsa engineers tune out specific low-frequency resonant waves that cause cabin drone without restricting exhaust flow. This 2.75-inch system is constructed from premium 304 stainless steel for maximum durability and corrosion resistance, providing a 20% increase in flow compared to the factory exhaust and reducing overall vehicle weight by 4 lbs.

The system features dual rear exits finished with quad dual-walled black PVD stainless steel tips for a sleek, high-end aesthetic. Designed as a direct bolt-on upgrade for the C7 Corvette, it requires no welding for installation and includes all necessary hardware and detailed instructions.

• Patented No-Drone RSC Technology for a quiet cruise
• Aggressive Xtreme series sound profile under load
• Flows 20% better than the stock exhaust system
• 4 lbs. lighter than factory components
• Premium 304 Stainless Steel construction
• Dual-walled Black PVD stainless steel tips
• Easy bolt-on installation; no welding required
• Made in the U.S.A.
• Manufacturer Part Number: 14762BLK
• Limited Lifetime Warranty

Fits 2008-2017 Toyota Sequoia Limited, Platinum, and SR5 (5.7L V8).

The Corsa Performance Touring Series Cat-Back Exhaust system is engineered to provide an aggressive exhaust note under acceleration without the cabin drone typically associated with aftermarket systems. Utilizing patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates specific resonance frequencies to ensure a quiet, comfortable interior during cruising. Constructed from premium 304 stainless steel, this exhaust improves flow by 60% over the factory system, increasing efficiency and reducing weight. The system is finished with 4-inch dual-walled black stainless steel tips for a custom look.

• Patented RSC technology provides a drone-free experience at cruise
• Flows 60% better than the stock exhaust for improved performance
• Mandrel-bent 304 stainless steel construction for maximum corrosion resistance
• 4-inch dual-walled black stainless steel tips
• Easy bolt-on installation with no welding required
• Lighter overall weight compared to the factory exhaust
• Includes detailed instructions and all necessary hardware
• Manufacturer Part Number: 14573BLK
• Made in the U.S.A.

Fits 2007-2008 Chevrolet Avalanche, Suburban 1500, and GMC Yukon XL 1500 (5.3L V8).

Upgrade your vehicle's performance and acoustic profile with the Corsa Sport Cat-Back Exhaust System (Part #14246). Engineered with Corsa's patented Reflective Sound Cancellation (RSC) technology, this system is specifically tuned to eliminate interior drone at cruising speeds while delivering a deep, aggressive exhaust note under acceleration. The straight-through design maximizes exhaust gas velocity and reduces backpressure for improved efficiency.

Constructed entirely from premium 304 stainless steel, this system is built to withstand corrosion and high-heat environments. It features mandrel-bent tubing that flows 70% better than the factory exhaust and provides a 10 lbs. weight reduction over stock. The system is finished with dual-walled polished stainless steel tips for a custom, high-end appearance. This is a direct bolt-on kit that utilizes factory mounting points, requiring no welding for installation.

• Patented RSC Technology ensures a drone-free experience during cruise
• Straight-through design flows 70% better than stock components
• 10 lbs. weight savings over the factory exhaust system
• Premium 304 stainless steel construction for maximum durability
• Dual walled polished stainless steel tips for heat resistance and style
• Simple bolt-on installation with no welding required
• Includes all necessary hardware and detailed instructions
• Proudly manufactured in the U.S.A.

Fits select 2009-2024 Dodge Ram 1500 and Ram 1500 Classic models.

Enhance the rear profile of your truck with the Corsa Performance Pro-Series exhaust tip kit. Constructed from premium 304 stainless steel, these dual-walled tips are engineered to withstand high temperatures and prevent heat distortion, ensuring the finish remains pristine over time. The Black PVD coating provides a deep, reflective dark finish that is significantly more durable than traditional powder coating or paint.

This kit features a simple clamp-on design for a secure installation without the need for welding. Each tip is precision laser-engraved with the Corsa Performance logo for a high-definition, professional appearance that complements any performance exhaust system.

• Manufacturer Part Number: TK009BLK
• Inlet Diameter: 3.0 in.
• Outlet Diameter: 4.5 in.
• Material: 304 Stainless Steel
• Finish: Black PVD
• Construction: Dual-Walled
• Installation: Clamp-On
• Warranty: Limited Lifetime
• Origin: Made in the U.S.A.

Fits select 2009-2023 Dodge Ram 1500 and Ram 1500 Classic models.

Enhance your vehicle's rear aesthetic and protect your finish with the CORSA Performance Pro-Series Exhaust Tip Kit (TK009). These premium tips are manufactured from dual-walled 304 stainless steel, a design specifically engineered to insulate the outer surface from exhaust heat. This protects the polished finish against distortion and discoloration, ensuring the tips maintain their visual appeal through thousands of heat cycles.

Each tip is finished with high-definition, precision laser engraving of the CORSA Performance logo for a signature look. Designed for enthusiasts who demand quality and ease of use, this kit features a clamp-on design for a secure, weld-free installation directly onto the exhaust piping.

• Manufacturer Part Number: TK009
• Premium 304 stainless steel construction for superior corrosion resistance
• Dual-walled design prevents heat-related discoloration and distortion
• 4.5-inch outlet diameter with a 3.0-inch inlet
• Designed to fit 2.5-inch pipe inlets
• Mirror-polished finish for a high-end look
• Precision laser-engraved CORSA Performance logo
• Simple clamp-on installation with included hardware
• Made in the USA
• Limited Lifetime Warranty

Fits select 2011-2024 Dodge Durango models including Citadel, Crew, GT, Limited, Pursuit, R/T, Special Service, and SXT.

Upgrade your vehicle's rear aesthetics with the Corsa Performance Pro-Series exhaust tip kit. Engineered for durability and style, these tips are manufactured from premium 304 stainless steel with a sophisticated Black PVD finish. The dual-wall design serves a functional purpose, acting as a thermal barrier to protect the finish from heat distortion and maintaining its visual appeal over time.

Each tip features a high-definition, precision laser-engraved Corsa Performance logo for a distinctive, high-end look. Designed as a direct clamp-on solution, this kit allows for a straightforward installation onto 2.5-inch exhaust piping without the need for welding.

• Manufacturer Part Number: TK007BLK
• Inlet Diameter: 2.5 in.
• Outlet Diameter: 4.5 in.
• Material: Premium 304 Stainless Steel
• Finish: Black PVD
• Design: Dual-Walled to prevent heat discoloration
• Installation: Easy Clamp-On design
• Origin: Made in the U.S.A.
• Warranty: Limited Lifetime Warranty

Fits 2011-2023 Ford F-150 (3.5L).

Protect your EcoBoost engine from the performance-robbing effects of blow-by with the Corsa Performance CC0010 Aluminum Oil Catch Can. This system is designed to intercept oil vapors, water, and fuel particulates before they reach your intake manifold. By capturing these contaminants, the catch can prevents carbon build-up on the intake valves, ensuring your 3.5L engine maintains its efficiency and power over the long term.

Built for durability and ease of service, the kit features a 6061 aluminum reservoir with a 3 oz capacity. The multi-stage separation system utilizes a series of chambers, internal baffles, and a bronze filter to maximize oil extraction from the airpath. Maintenance is simplified with a threaded can housing and a knurled bottom, allowing for quick unscrewing and draining. The included 11-gauge aluminum bracket is powder-coated for corrosion resistance and provides a secure, easily accessible mounting point under the hood.

• All-aluminum 6061 construction with a powder-coated 11-gauge mounting bracket
• Multi-stage separation system with chambers, baffles, and a bronze filter
• 3 oz reservoir capacity to extend service intervals
• OEM-style quick-disconnect fittings and multi-ply reinforced automotive-grade hoses
• Knurled bottom and threaded housing for easy maintenance
• Estimated 30-minute installation time
• 1-year manufacturer warranty
• Manufacturer Part Number: CC0010

Fits 2021-2023 Ram 1500 TRX and 2021 TRX Launch Edition.

The CORSA Performance oil catch can (CC0008) is engineered to safeguard your engine from the damaging effects of blow-by. By intercepting gas, water, oil vapors, and particulates from the airpath, this multi-stage separation system prevents carbon build-up on intake valves and protects sensitive intake components. Constructed from 6061 aluminum, the unit is designed to withstand the rigors of the engine bay while maintaining performance over the life of the vehicle.

Installation is designed for simplicity, utilizing vehicle-specific 11-gauge powder-coated aluminum brackets and premium automotive-grade hoses. The system features OEM-style quick-disconnect fittings to ensure a secure, leak-free seal and an install time of 30 minutes or less. The threaded housing allows for easy service of the 3 oz. reservoir during oil changes.

• 6061 aluminum construction for superior corrosion resistance
• Multi-stage oil separation system captures harmful vapors and particulates
• OEM-style quick-disconnect fittings for a secure, factory-quality fit
• Multi-ply reinforced automotive-grade hoses for long-term durability
• Threaded 3 oz. capacity housing for extended service intervals
• Machined and powder-coated 11-gauge aluminum mounting brackets
• Simple installation in 30 minutes or less
• Manufacturer Part Number: CC0008
• 1-Year Warranty

Fits 2020-2023 Chevrolet Corvette Stingray.

Protect your engine from the performance-robbing effects of oil blow-by with the CORSA Performance Oil Catch Can. This multi-stage separation system is engineered to capture gas, water, and oil vapors before they reach your intake manifold. By reducing carbon buildup on sensitive intake valves, the CC0005 ensures your vehicle maintains peak performance and long-term reliability.

The system is constructed from durable 6061 aluminum and features a threaded housing for easy servicing. To ensure a secure, leak-free connection, Corsa includes premium multi-ply reinforced automotive-grade hoses and OEM-style quick-disconnect fittings. The kit is supported by a machined and powder-coated 11-gauge aluminum bracket, positioned for easy accessibility during routine maintenance.

• Manufacturer Part Number: CC0005
• Material: 6061 Aluminum housing with 11-gauge powder-coated brackets
• Capacity: 3 oz. reservoir for extended service intervals
• Separation: Multi-stage internal filtration system
• Fittings: OEM-style quick-disconnect connectors
• Installation: Bolt-on design installs in 30 minutes or less
• Includes: All necessary hoses, brackets, and hardware
• Warranty: 1-Year manufacturer warranty

Fits 2023-2024 Chevrolet Corvette Z06.

The mid-engine C8 Corvette Z06 generates significant thermal energy, requiring specialized shielding to protect the chassis and body components. While the factory aluminum reflective substrate is effective, its silver finish creates a visual distraction behind the rear tire and exhaust bezels. CORSA Performance Black Out Heat Protection Shields (AC012) eliminate this eyesore while providing an additional layer of high-performance insulation.

Engineered for extreme environments, these shields are constructed from 10mm black-coated aluminum with a 1/8-inch composite glass core. This proprietary design is tested to withstand temperatures up to 1750°F, ensuring your Corvette is protected during aggressive driving or track sessions. In addition to thermal management, the composite core acts as a sound dampener, reducing road noise by up to 50% for a more refined cabin experience.

• Stealth Appearance: Proprietary high-temperature black coating hides reflective factory shielding visible through the exhaust bezels.
• Advanced Insulation: 10mm aluminum construction with a 1/8" composite glass core for superior thermal and acoustic performance.
• Extreme Heat Resistance: Rated to withstand operating temperatures up to 1750°F.
• Acoustic Benefits: Absorbs exterior sound and cuts road noise by as much as 50%.
• Precise Fitment: Pre-shaped specifically for the C8 Z06 rear tire cavity for a clean, factory-style installation.
• Simple Installation: High-strength, self-adhesive backing allows for a secure peel-and-stick application that is unaffected by wind, water, or temperature cycles.

Fits 2020-2023 Chevrolet Corvette Stingray. These specialized heat blankets are engineered to address the significant thermal challenges of the C8's mid-engine configuration, specifically when upgrading to high-performance exhaust components.

The C8 Corvette engine bay is susceptible to heat soak due to the tight packaging of the exhaust system. Corsa Performance catalytic converter blankets provide critical thermal management by insulating the converters and preventing radiant heat from reaching sensitive engine components, wires, and body panels. These blankets are particularly essential when running RACE SPEC EPA Compliant High Flow Cats, which can distribute more heat than the heavily shielded factory units.

• Advanced Materials: Constructed with a high-temperature basalt lining and a titanium-infused outer shell for maximum heat containment and long-term durability.
• Performance Protection: Reduces ambient engine bay temperatures to maintain consistent performance and protect neighboring hardware.
• Precision Fit: Designed as a direct thermal solution for CORSA Performance High Flow Cats (engineered for use with part cor16234).
• Manufacturer Part Number: AC011

Fits select 1989-2021 Dodge D250/D350/W250/W350 and Ram 2500/3500, plus Ford Excursion and F-250/F-350 Super Duty models (5.9L).

Upgrade your diesel exhaust system with the CORSA RSC Technology Muffler, engineered to deliver an aggressive exterior sound profile without the cabin drone common in aftermarket diesel setups. Utilizing patented Reflective Sound Cancellation (RSC) technology, this muffler targets and eliminates specific drone-inducing frequencies while maintaining a high-flow internal design that outperforms restrictive stock units. Constructed from premium 304 stainless steel for long-term durability, it features notched and expanded inlets and outlets to simplify the installation process.

• Drone-Free Cruising: Patented RSC Technology cancels out cabin resonance for a comfortable ride.
• Aggressive Tone: Specifically tuned to provide a deep, powerful exhaust note under acceleration.
• Premium Construction: Made from heavy-duty 304 stainless steel to resist corrosion and heat.
• Installation: Easy cut-and-clamp design requires no welding for most applications.
• Manufacturer Part Number: 8004002
• Included Hardware: Notched and expanded inlets/outlets for secure clamping.
• Origin: Proudly manufactured in the U.S.A.

Fits 2012-2017 Jeep Grand Cherokee SRT and SRT8 (6.4L).

The CORSA Performance APEX Series Intake System is a high-performance alternative to the restrictive factory intake on your 6.4L HEMI. Engineered with Dynamic Flow Technology (DFT), this system optimizes the air path to increase air volume and density. By utilizing precise cross-sectional areas in the metal air ducts, the APEX series reduces intake restrictions to unlock horsepower and torque while maintaining high flow velocity.

This system features a durable black wrinkle coat finish that provides a professional, rugged look under the hood while resisting heat and wear. Every APEX Series intake is paired with an oversized MaxFlow 5 air filter to maximize surface area, improving flow and extending service intervals. Designed for a straightforward installation, this kit typically installs in under 30 minutes using basic hand tools and factory mounting points.

• Part Number: 616964-O
• Construction: Mandrel-bent metal air ducts for maximum flow velocity
• Finish: Durable black wrinkle coat for superior engine bay aesthetics
• Technology: Dynamic Flow Technology (DFT) maximizes air delivery and density
• Filter: Oversized MaxFlow 5 air filter reduces maintenance intervals
• Installation: Complete bolt-on system; includes all hardware and instructions

The Corsa Performance MaxFlow 5 high-flow air filter (MPN 5167) is a technical upgrade over restrictive factory paper elements, designed to increase airflow while maintaining engine safety. This washable and reusable filter utilizes a 5-layer oiled cotton gauze media that achieves over 98% filtration efficiency, ensuring superior protection against airborne contaminants during everyday driving.

Engineered for longevity, the MaxFlow 5 media holds up to 20% more dust than similar cone-shaped filters, allowing for extended service intervals of up to 40,000 miles depending on driving conditions. Each filter is manufactured in the U.S.A. to exacting tolerances, providing a high-performance solution that replaces worn or inefficient universal or intake-specific filters.

• High-Performance Media: 5-layer oiled cotton gauze optimizes the balance between maximum CFM and engine protection.
• Extended Service: Washable and reusable design with maintenance intervals reaching up to 40,000 miles.
• American Craftsmanship: Proudly made in the U.S.A. with a focus on material quality and durability.
• Warranty: Covered by a 1-year manufacturer warranty for peace of mind.

• Mounting Flange (ID): 6.00 in
• Base Diameter: 7.50 in
• Top Diameter: 4.75 in
• Filter Height: 8.00 in
• MPN: 5167

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, Z06, and ZR1 (6.2L). This Corsa Performance DryTech 3D air filter is a high-flow replacement specifically engineered for use with Corsa intake systems 44001 and 44001D.

Built for the C7 Corvette platform, this filter utilizes specialized hydrophobic polysynthetic fibers and unique 3D pleating geometry to increase media depth. This design maximizes filtration capacity and extends service intervals up to 50,000 miles, depending on driving conditions. The dry media requires no oiling, eliminating the risk of MAF sensor contamination while simplifying the maintenance process. The progressive fit ribbing ensures a reliable, airtight seal at the mounting point for consistent performance under vacuum.

• Manufacturer Part Number: 5165D
• Direct replacement for Corsa intakes 44001 and 44001D
• DryTech 3D media requires no oil for easier maintenance
• Quick-dry technology allows for washing and drying in as little as 2 hours
• Hydrophobic synthetic fibers resist saturation and trap more particulate
• Progressive fit ribbing for a secure, leak-free seal
• Includes all necessary hardware
• Made in the U.S.A.

Fits 2006-2013 Chevrolet Corvette Z06 models equipped with CORSA Performance intake system part number 44108-1.

The CORSA Performance DryTech 3D Air Filter (MPN 5159D) is engineered to maximize airflow while simplifying maintenance. Utilizing specialized hydrophobic polysynthetic fibers and unique pleating geometry, this filter increases media depth to trap more particulate than standard cone-style filters. This high-capacity design allows for service intervals up to 50,000 miles, depending on your specific driving environment.

Designed for long-term durability, the DryTech 3D media requires no oiling, eliminating the risk of MAF sensor fouling common with oiled filters. The filter features progressive fit ribbing to ensure a reliable, air-tight seal at the mounting point. Cleaning is straightforward: simply wash with soap and water for a 2-hour rapid dry time, or vacuum the surface for a quick performance refresh.

• Non-oiled polysynthetic media for high performance and low maintenance
• Extended service intervals up to 50,000 miles between cleanings
• Hydrophobic technology resists saturation and dries in as little as 2 hours
• Progressive fit ribbing ensures a secure, air-tight mesh point
• Reusable design suitable for everyday street use or off-road conditions
• Includes all necessary hardware
• Manufactured in the U.S.A.

Fits select 2017-2022 Ford F-150, Ford Expedition, and Lincoln Navigator (3.5L).

CORSA Performance Cold Air Intake systems are engineered to optimize airflow by replacing restrictive factory components with free-flowing induction technology. This system utilizes a high-performance airbox that protects the engine from heat soak while delivering a steady supply of cold, dense air for improved engine performance and throttle response.

Equipped with DryTech 3D filtration, this intake features a high-flow, no-oil filter designed to maximize airflow while maintaining 98% filtration efficiency. This low-maintenance solution lasts up to 50,000 miles between cleanings—simply vacuum the surface or rinse with soap and water to restore peak performance. The intake housing is topped with a smoked acrylic see-through lid, allowing for easy filter inspection without tools.

• DryTech 3D filtration technology: No oil required, easy maintenance
• Maintenance interval: Up to 50,000 miles (depending on driving conditions)
• Smoked acrylic see-through airbox lid for quick inspection
• Outflows stock air intake systems to protect and enhance engine performance
• Simple bolt-on installation: Installs in under 1 hour with basic hand tools
• Lifetime Warranty
• Made in the USA
• Manufacturer Part Number: 49835D

Fits select 2017-2022 Ford F-150, Ford Expedition, and Lincoln Navigator (3.5L).

The CORSA Performance Cold Air Intake system is engineered to optimize airflow and maximize engine protection for the 3.5L EcoBoost engine. By replacing the restrictive factory airbox with a high-flow, rugged housing, this intake improves throttle response and engine efficiency. At the heart of this system is the Donaldson PowerCore Ultra-Web air filter, which achieves a 99.96% efficiency rating and provides up to 150,000 miles of maintenance-free performance, even in dry, off-road conditions. The design includes a smoked acrylic see-through lid for quick filter inspections and a technical, high-performance aesthetic under the hood.

• Features Donaldson PowerCore Ultra-Web filtration technology
• 99.96% filtration efficiency for maximum engine protection
• Maintenance-free air filter interval up to 150,000 miles
• Smoked acrylic see-through airbox lid allows for easy visual checks
• Simple bolt-on installation typically completed in under one hour
• Outflows stock air intake systems for improved performance
• Proudly Made in the USA
• Manufacturer Part Number: 498356
• Limited Lifetime Warranty

Fits 2021-2023 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, and Raptor (3.5L).

Improve your engine's efficiency and airflow with the CORSA Performance cold air intake system. Engineered to outflow the factory intake, this system utilizes a DryTech 3D synthetic air filter that provides superior filtration without the need for oiling. The intake features a smoked acrylic see-through airbox lid, allowing for quick filter inspections while adding a custom look to your engine bay. Designed for a direct bolt-on installation, this kit can typically be installed in under an hour using basic hand tools.

• Manufacturer Part Number: 49135D
• Filter Type: DryTech 3D reusable synthetic (no oil required)
• Filtration Technology: Ultra-Web media with aluminum screen reinforcement
• Maintenance Interval: Up to 50,000 miles between cleanings (depending on conditions)
• Housing: Rugged airbox with smoked acrylic lid
• Installation: Bolt-on design; installs in under 1 hour
• Manufacturing: Made in the USA
• Warranty: Lifetime Warranty