Fits 2014-2020 Infiniti QX30.

This DFC performance brake rotor is engineered to manage heat and improve braking consistency during spirited driving or heavy traffic. The dimpled and slotted design addresses common braking issues: the slots provide an escape path for gas, dust, and moisture to prevent pad glazing, while the dimples offer the cooling benefits of traditional drilling without compromising the rotor's structural integrity or increasing the risk of stress cracks.

Precision-machined for a direct factory fit, this rotor features a silver protective coating on the hub and vanes to prevent rust and maintain a clean look behind the wheels. It is designed specifically for the front right passenger-side position, ensuring correct vane orientation for optimal airflow and thermal management.

• Dimpled and slotted friction surface for improved bite and debris removal
• Silver corrosion-resistant finish on non-friction surfaces
• Direct replacement for OE components with no modifications required
• Precision balanced to ensure smooth, vibration-free operation
• Position: Front Right

Fits select 1997-2015 Honda Civic, Honda Prelude, and Acura ILX. This DFC (Dynamic Friction Company) rear brake kit provides a complete solution for restoring consistent, predictable stopping power to your vehicle’s rear axle.

The kit features DFC 5000 Advanced brake pads, designed for drivers who require a reliable daily-driver pad that balances low noise with high friction stability. These pads are paired with precision-machined rear rotors to ensure smooth engagement and optimal heat dissipation. By including the necessary application-specific hardware, this kit eliminates the need to reuse worn or corroded clips, ensuring a quieter operation and even pad wear.

• Matched pad and rotor set designed for direct bolt-on installation.
• 5000 Advanced series pads offer low-dust performance and high-temperature stability.
• Rotors are manufactured to precise tolerances for vibration-free braking.
• Includes premium hardware to ensure proper pad movement and reduced noise.
• Replaces worn OE rear braking components for improved safety and reliability.

Vehicle Fitment Summary:
1997-2001 Honda Prelude (Base, Type SH)
2006-2015 Honda Civic (EX, EX-L, Si, Hybrid, Hybrid-L)
2013-2015 Acura ILX (Base, Hybrid)

Fits 2016-2023 Audi A5 Sportback models.

Improve the thermal management and debris clearance of your Audi's braking system with this DFC Front Left Dimpled and Slotted Brake Rotor. Engineered as a performance upgrade over smooth OE rotors, this component features a specialized surface design to combat brake fade and glazing. The precision-machined dimples provide the degassing benefits of a cross-drilled rotor without compromising structural integrity, while the slots continuously sweep away dust, gas, and moisture from the friction surface for consistent pad-to-rotor contact.

• Dimpled surface aids in degassing without the risk of stress cracks common in fully drilled rotors
• Precision slots clear brake dust and gases to maintain optimal friction levels
• Silver finish provides a clean look and offers protection against corrosion on non-friction surfaces
• Direct fitment to factory mounting points on the front left position
• Cast and machined to strict tolerances for balanced, vibration-free operation

Fits 2015-2017 Chevrolet SS.

This DFC Rear Right Dimpled & Slotted Silver Brake Rotor is engineered to improve braking performance and thermal stability. The combination of a dimpled and slotted surface provides the heat dissipation and outgassing benefits of a drilled rotor without compromising the structural integrity of the casting. The slots act as a mechanical wiper, clearing away brake dust, gases, and moisture to maintain consistent pad-to-rotor contact and bite during spirited driving.

Each rotor is finished with a silver protective coating to resist corrosion on the hub and vanes, ensuring a clean appearance behind your wheels. Built to precise specifications for a direct-fit installation, this rotor replaces your worn or warped factory unit while offering enhanced cooling and debris removal.

• Position: Rear Right
• Rotor Style: Dimpled & Slotted
• Finish: Silver Zinc Plating
• Maintains structural integrity while improving heat dissipation
• Direct replacement for factory OE dimensions

Fits 2006-2011 Honda Civic EX, EX-L, and Hybrid models (including Hybrid-L).

Restore the stopping power and safety of your vehicle with this complete set of DFC front and rear brake rotors. These rotors are engineered to match original equipment (OE) specifications for a precise, direct-fit replacement. Precision-machined to ensure smooth operation and consistent pad-to-rotor contact, they provide the thermal stability needed for daily driving. Replacing worn or warped rotors across both axles ensures balanced braking performance and helps eliminate pedal pulsation.

• Direct-fit replacement for factory front and rear rotors
• Precision-machined surfaces for reduced vibration and noise
• Cast from high-quality metallurgy for effective heat dissipation
• Engineered to meet or exceed OE tolerances

Vehicle Fitment:

Fits 2015-2017 Chevrolet SS.

The DFC Dimpled & Slotted Silver Brake Rotor is engineered to improve braking performance and heat management without the structural compromises often associated with fully drilled rotors. By utilizing dimples rather than through-holes, this rotor provides the necessary venting for brake gases and dust while maintaining superior casting strength to resist stress cracking under high thermal loads.

• CNC-machined slots sweep away debris, water, and gases to maintain a clean pad-to-rotor contact patch.
• Dimpled surface allows for efficient outgassing while preserving the rotor's structural integrity.
• Silver coating provides a durable barrier against corrosion on the hub, vanes, and edges.
• Precision mill-balanced to ensure smooth, vibration-free operation at all speeds.
• Direct-fit replacement for the rear left factory rotor.

Fits 2004-2010 BMW X3 (E83) models. This DFC dimpled and slotted performance rotor is engineered to improve braking response and heat management for the rear right position of your BMW.

By combining both dimples and slots, this rotor provides a consistent friction surface while maintaining structural integrity. The slots act as a path for water, dust, and brake gases to escape, ensuring firm pad contact under load. The dimples offer the cooling benefits of a drilled rotor without the risk of stress cracks under high thermal stress.

• Precision machined to OE tolerances for a direct-fit installation
• Dimpled and slotted design promotes outgassing and debris clearance
• Silver zinc coating protects against rust and corrosion on non-friction surfaces
• Vented design helps dissipate heat during aggressive driving or heavy braking
• Specific to the Rear Right (Passenger Side) location

Fits 2014-2022 Maserati Ghibli (Front Right).

This DFC Dimpled and Slotted Brake Rotor is engineered to enhance braking performance and heat management over standard smooth rotors. The specialized surface design uses slots to sweep away water, gas, and brake dust, ensuring a clean contact patch between the pad and the rotor. Dimples provide the cooling benefits of a drilled rotor without compromising the structural integrity of the casting, making them ideal for high-performance applications.

Each rotor is precision-machined for balance and features a silver finish to help protect non-friction surfaces from corrosion. This rotor serves as a direct bolt-on replacement for the factory unit, maintaining original equipment tolerances while improving fade resistance.

• Position: Front Right
• Series: DFC Performance
• Rotor Style: Dimpled and Slotted
• Finish: Silver Coated
• Specifically designed for 2014-2022 Maserati Ghibli applications

Fits select 2009-2015 Subaru BRZ, Forester, Impreza WRX, Legacy, and Outback models.

This DFC (Dynamic Friction Company) brake rotor set offers a complete solution for restoring factory braking performance across both axles. Designed as a direct bolt-on replacement for worn-out OE units, these rotors are precision-machined to ensure consistent thickness and proper balance, eliminating the pedal pulsation and vibration common with warped or unevenly worn discs.

Built to handle the thermal loads of daily driving and spirited commutes, these front and rear rotors provide the heat dissipation needed to prevent brake fade and maintain safety. Whether you are servicing a Forester for the family or a WRX for the weekend, these DFC rotors deliver reliable stopping power and quiet operation.

• Complete vehicle set includes both front and rear disc brake rotors
• Direct replacement for factory rotors ensures easy installation
• Precision-machined for optimal pad-to-rotor contact and reduced noise
• High-quality casting for durability and effective heat management
• Engineered to match original equipment specifications for fit and function

Fits 2008-2017 Chevrolet Caprice.

This DFC Rear Right Brake Rotor is engineered to improve braking consistency and thermal management under demanding driving conditions. The dimpled and slotted design provides a clear path for water, brake dust, and gases to escape the friction surface, ensuring more reliable pad contact and reduced brake fade. Unlike traditional drilled rotors, the dimpled surface offers the cooling benefits of increased surface area without compromising the structural integrity of the rotor casting.

• Direct OE replacement for the rear right (passenger side) position
• Slotted pattern maintains a clean pad surface and improves initial bite
• Precision-machined dimples facilitate heat dissipation and outgassing
• Silver finish protects non-friction surfaces against corrosion and oxidation
• Matches factory dimensions for a bolt-on installation with standard calipers

Fits select 1984-1988 Nissan 200SX SE and 300ZX Turbo.

Maintain consistent stopping power with this set of DFC front and rear brake rotors, engineered to meet or exceed original equipment specifications. Designed as a direct-fit replacement for the 1984-1988 Nissan 200SX SE and 300ZX Turbo, these rotors ensure factory-level performance without the need for modifications or custom brackets. Each rotor is precision-machined to tight tolerances, minimizing runout and disc thickness variation (DTV) for a smooth, vibration-free pedal feel.

For Turbo and SE models equipped with 4-wheel disc systems, reliable heat management is critical. These DFC rotors utilize high-strength metallurgy for improved thermal stability, helping to prevent brake fade and ensuring long-term durability under varying driving conditions.

• Precision-machined surfaces for reduced brake judder and noise
• Direct-fit replacement for factory rotors on 4-wheel disc applications
• Engineered with metallurgy that matches OE cooling and friction properties
• Full set including both front and rear axle coverage

Fits select 2019-2025 Hyundai Elantra, Elantra N, Kona N, and Veloster N.

DFC rear brake rotors provide a direct-fit solution for restoring original braking performance and safety. These rotors are manufactured to precise tolerances, ensuring a smooth surface finish and proper balance to eliminate vibration and brake pedal pulsation. Designed as a straightforward replacement for worn or warped factory units, these rotors maintain the cooling capacity and structural integrity required for both daily commuting and spirited driving in N-model applications.

• Precision-machined for consistent thickness and smooth pad engagement
• Engineered to match OE cooling vane configurations for effective heat dissipation
• Direct-fit replacement for the factory rear brake rotors
• High-quality metallurgy provides long-term durability and resistance to thermal cracking
• Properly balanced to ensure vibration-free operation

Fits select 2018-2023 Genesis G70 and Kia Stinger (2.0L).

Restore the braking performance and reliability of your vehicle with this complete set of DFC Front & Rear Brake Rotors. These rotors are engineered as direct replacements for your factory equipment, maintaining the original equipment (OE) dimensions and tolerances to ensure a hassle-free installation and consistent pedal feel. Designed to provide efficient heat dissipation and minimize vibration, these rotors deliver the dependable stopping power required for daily driving and spirited commutes.

• Manufactured to precise tolerances for a direct fit and optimal balance
• Engineered for thermal stability and resistance to warping
• Provides consistent friction surface for improved brake pad bedding
• Complete front and rear set for a comprehensive brake system refresh

Fitment Applications:

• 2019-2023 Genesis G70 (Submodels: Advanced, Base, Dynamic, Elite, Prestige, Sport)
• 2018-2021 Kia Stinger (Submodels: Base, GT-Line, Premium)

Fits 2005-2006 Honda CR-V (EX, LX, and SE).

This DFC Complete Brake Kit is a comprehensive solution designed to restore original braking performance while providing superior resistance to the elements. This kit includes front and rear GeoSpec coated rotors, 4000 HybriDynamic brake pads, and all necessary stainless steel hardware for a complete, professional-grade installation.

The GeoSpec rotors are engineered from G3000/G11H18 iron castings for maximum thermal stability. Each rotor is 100% mill-balanced and precision-cut for a smooth, vibration-free stop. The specialized GeoSpec coating offers advanced corrosion protection, outlasting traditional zinc or painted finishes, and requires no pre-installation degreasing. Paired with these are the 4000 HybriDynamic pads, which are scorched to minimize the break-in period and feature premium rubber-steel-rubber shims to eliminate noise, vibration, and harshness (NVH).

• Complete Kit: Includes front and rear rotors, pads, and application-specific hardware.
• GeoSpec Coating: Provides superior corrosion resistance over standard rotors; ready to install out of the box.
• Precision Balanced: 100% mill-balanced to ensure zero vibration at any speed.
• Quiet Performance: Rubber-steel-rubber shims and scorched pad surfaces provide a silent, immediate bite.
• Premium Castings: Built with G3000/G11H18 iron for long-term durability and strength.
• Safety First: 100% asbestos-free formulation with stainless steel hardware and rubber-coated abutment clips.

Fits select 2005-2022 Acura ILX, TSX, and Honda Accord models.

Dynamic Friction Company (DFC) brake rotors are engineered as precise, direct-fit replacements for your vehicle's original equipment. These rear rotors are manufactured to strict tolerances to restore factory-level braking performance, ensuring consistent friction and reliable stopping power under various driving conditions.

• Direct replacement for factory rear rotors, mounting to OE locations without modification
• Cast from high-quality materials to provide optimal heat dissipation and prevent warping
• Precision-machined surfaces for reduced noise and consistent pad-to-rotor contact
• Meets or exceeds OE specifications for fit, form, and function

Fits select 2020-2025 Mercedes-Benz CLA35 AMG, CLA45 AMG, GLA35 AMG, GLA45 AMG, and GLB35 AMG 4Matic models.

These DFC front brake rotors are engineered as direct-fit replacements for original equipment, restoring the precise braking performance and heat dissipation required by Mercedes-Benz AMG platforms. Designed to match factory specifications for dimensions and vane count, these rotors provide a consistent friction surface and reliable structural integrity under high-performance driving conditions.

• Precision machined to meet or exceed OE tolerances for balanced operation.
• Cast and finished for maximum durability and resistance to thermal warping.
• Direct replacement for factory rotors; requires no modification to the calipers or mounting points.
• Engineered to maintain original pedal feel and stopping power.

Fits select 2005-2013 Chevrolet Silverado 1500 and GMC Sierra 1500, including Classic models. This DFC brake component set is designed to restore factory stopping performance by replacing worn-out front rotors and rear drums.

As these vehicles age, thermal cycling and friction wear lead to thinning rotors and out-of-round drums, causing vibrations and reduced braking efficiency. This set provides a direct-fit solution, manufactured to meet original equipment dimensions and metallurgy for reliable heat dissipation and consistent pedal feel. Whether you are maintaining a daily driver or a high-mileage work truck, these components ensure your braking system operates within its original design parameters.

• Direct replacement for factory front disc rotors and rear drum brakes
• Precision machined to ensure smooth operation and reduced brake noise
• Engineered for the specific weight and load requirements of half-ton GM trucks
• Maintains consistent friction surface for reliable stopping power

Fits select 2007-2018 Lexus ES300h, ES350, Toyota Avalon, and Toyota Camry models.

This DFC Complete Brake Kit simplifies your front-end brake service by bundling precision-engineered Geospec rotors with 4000 series HybriDynamic pads and all necessary stainless steel hardware. This combination is designed to restore factory-like pedal feel and quiet operation while providing enhanced protection against the elements.

• DFC Geospec Coated Rotors: Cast from premium G3000/G11H18 iron, these rotors feature a specialized coating that offers superior corrosion resistance compared to traditional zinc or painted finishes. Each rotor is 100% mill-balanced to ensure smooth, vibration-free stopping.
• 4000 HybriDynamic Brake Pads: These asbestos-free pads are scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period. They feature premium rubber-steel-rubber shims to isolate noise and vibration.
• Precision Fit: Engineered to match the exact form and function of the original equipment, featuring a non-directional finish for immediate performance and chamfered and slotted designs where applicable to minimize braking noise.
• Complete Hardware Kit: Includes stainless steel abutment clips and hardware to reduce drag, improve fuel efficiency, and prevent premature pad wear.
• Installation Ready: Ships ready to install with no pre-degreasing required, saving time on the lift or in the driveway.

Fits select 2006-2025 Audi A3, Q3, TT, and Volkswagen GTI, Jetta, Passat, Taos, and Tiguan (2.0T).

Dynamic Friction Company (DFC) brake rotors are engineered as a direct-fit replacement for your vehicle's factory braking system. Designed to restore original stopping power and pedal feel, these front rotors are critical for maintaining safety and performance. Each rotor is CNC-machined to precise tolerances, ensuring a smooth friction surface and proper balance to eliminate vibration and noise during operation.

Whether you're performing a routine brake service or replacing worn discs, DFC rotors provide the reliability required for daily commuting. These rotors are cast to provide consistent heat dissipation and long-term durability, ensuring they meet the demands of your vehicle's specific braking requirements.

• Direct replacement for factory front brake rotors
• Precision CNC-machined for optimal surface finish and fitment
• Mill-balanced to prevent brake pulsation and vibrations
• Engineered for consistent heat management and stopping performance
• Compatible with a wide range of Audi and VW models from 2006 to 2025

Fits 2004-2010 BMW X3. This DFC Rear Left Dimpled and Slotted Brake Rotor is engineered to enhance braking performance and thermal stability. The combination of a dimpled and slotted surface effectively vents heat, moisture, and brake dust from the contact patch, helping to reduce brake fade and prevent pad glazing during heavy use.

The dimpled design provides the outgassing benefits of a drilled rotor without compromising the structural integrity of the disc, making it more resistant to stress cracking. Finished in silver for lasting corrosion resistance, this rotor is a direct replacement for the factory unit and maintains OE-spec tolerances for a precise fit.

• Position: Rear Left
• Rotor Style: Dimpled and Slotted
• Finish: Silver
• Year Range: 2004-2010
• Fits: BMW X3

Fits select 2007-2022 Toyota Tundra, Sequoia, Land Cruiser, and Lexus LX570 models.

Restore consistent stopping power and smooth pedal feel with this complete DFC (Dynamic Friction Company) front and rear rotor set. These rotors are precision-engineered to meet or exceed original equipment standards, providing a direct-fit replacement for worn or warped factory discs. Designed for the high-thermal demands of trucks and SUVs, these rotors ensure reliable performance and vibration-free operation during daily driving or when hauling heavy loads.

• Complete kit includes both front and rear brake rotors
• Precision-machined surfaces for balanced operation and reduced pedal pulsation
• Direct replacement for factory equipment with no modifications required
• Optimized metallurgy for enhanced heat dissipation and durability

Fits select 2016-2025 Acura MDX, Honda Pilot, and Honda Ridgeline.

This DFC Complete Front Brake Kit provides a comprehensive solution for restoring reliable stopping power and protecting against corrosion. By pairing GeoSpec coated rotors with 4000 Series HybriDynamic brake pads, this kit ensures a quiet, smooth brake feel with components engineered to meet the original form, fit, and function of your vehicle.

• GeoSpec Coated Rotors: Cast from premium G3000/G11H18 iron for high strength and stability. The GeoSpec coating offers superior corrosion resistance over traditional zinc or paint, and the rotors are mill-balanced for zero-vibration operation.
• HybriDynamic 4000 Series Pads: Features a 100% asbestos-free formulation that is scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period.
• NVH Control: Equipped with premium rubber-steel-rubber shims to reduce noise, vibration, and harshness. The rotors feature a non-directional finish for immediate pad-to-rotor mating.
• Installation-Ready: These rotors require no pre-degreasing or cleaning preparation, saving time during the install. All necessary stainless steel hardware and rubber-coated abutment clips are included to ensure proper caliper movement.
• Includes: Two (2) front GeoSpec brake rotors, one (1) set of HybriDynamic 4000 series front brake pads, and a vehicle-specific hardware kit.

Fits select 2008-2021 Lexus NX200t, NX300, NX300h, RX350, RX450h, and Toyota Highlander and Sienna.

This DFC Complete Brake Kit provides a comprehensive solution for front-end brake service, combining GeoSpec coated rotors with 4000 HybriDynamic pads and premium hardware. Engineered for an exact fit, these components replace worn factory equipment to restore original stopping performance while adding enhanced protection against the elements.

The GeoSpec rotors are manufactured from premium G3000/G11H18 iron castings for thermal stability and long-term durability. Each rotor is 100% precision cut and mill-balanced to ensure smooth rotation and zero vibration. The specialized GeoSpec coating offers superior corrosion resistance compared to conventional zinc or painted finishes, keeping the rotor hats and vanes protected from rust.

Paired with the rotors are DFC 4000 HybriDynamic brake pads, which feature a scorched surface to remove uncured bonding agents and accelerate the break-in process. These pads use rubber-steel-rubber shims and stainless steel hardware to eliminate noise and vibration, providing a quiet, confident pedal feel.

• Precision mill-balanced rotors ensure smooth stopping and zero vibration
• G3000/G11H18 iron casting for maximum strength and stability
• GeoSpec coating provides advanced corrosion protection over standard finishes
• Scorched pad formulation for improved initial bite and faster bed-in
• Rubber-steel-rubber shims for superior NVH (noise, vibration, and harshness) control
• Non-directional finish for faster break-in and smoother stops
• Includes stainless steel hardware and rubber-coated abutment clips
• 100% asbestos-free formulation

Fits select 2003-2023 Toyota 4Runner, FJ Cruiser, and Tacoma.

The DFC GeoSpec Complete Front Brake Kit provides a comprehensive, direct-fit solution for owners looking to restore stopping power while adding superior corrosion resistance. This kit pairs DFC GeoSpec coated rotors with 4000 Series HybriDynamic brake pads, specifically engineered to meet or exceed OEM form, fit, and function. The rotors are cast from G3000/G11H18 iron for high-temperature stability and are mill-balanced to eliminate vibration during high-speed braking.

• GeoSpec Coating: Provides an advanced layer of protection against rust and corrosion, significantly outperforming standard zinc or painted finishes.
• 4000 Series HybriDynamic Pads: Factory-scorched to remove uncured bonding agents, reducing the required break-in period and improving initial bite.
• Premium NVH Suppression: Features rubber-steel-rubber (RSR) shims and rubber-coated abutment clips to isolate noise and vibration for quiet operation.
• Precision Machining: Rotors feature a non-directional finish and are 100% precision cut for smoother engagement and faster pad seating.
• Stainless Steel Hardware: Includes all necessary stainless steel clips and hardware to prevent drag and ensure even pad wear.
• Ready to Install: No pre-degreasing required; components are manufactured to bolt directly to factory mounting points without modification.

Fits 2019-2025 Acura RDX (Base, PMC Edition, and SH-AWD).

This DFC Front Brake Kit provides a professional-grade solution for restoring the braking performance and aesthetics of your vehicle. By pairing GEOSPEC coated rotors with 4000 HybriDynamic brake pads, this kit addresses common issues like brake pulsation, corrosion-related noise, and excessive dust while maintaining an OEM-level fit and finish. The rotors are ready to install immediately with no pre-degreasing required, saving time during the installation process.

• GEOSPEC Coated Rotors: Cast from premium G3000/G11H18 iron, these rotors feature a specialized coating that provides superior corrosion protection compared to conventional zinc or paint. Each unit is mill-balanced and precision-cut to ensure zero vibration at any speed.
• 4000 HybriDynamic Pads: These pads are scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period and improving stopping power from the first stop.
• Advanced Noise Dampening: Equipped with DFC Premium Rubber-Steel-Rubber (RSR) shims and rubber-coated abutment clips to isolate vibration and minimize NVH (noise, vibration, and harshness).
• Complete Hardware Kit: Includes stainless steel hardware to replace worn OE components, preventing drag and ensuring even pad wear.

• Position: Front
• Rotor Material: G3000/G11H18 Iron Castings
• Rotor Finish: GEOSPEC Corrosion Resistant Coating
• Pad Series: 4000 HybriDynamic
• Shim Material: Rubber-Steel-Rubber (RSR)
• Formulation: 100% Asbestos-Free

Fits select 2008-2017 Honda Accord and 2009-2014 Acura TSX models.

The DFC Complete Rear Brake Kit provides a matched solution for restoring reliable stopping power and superior corrosion resistance. This kit pairs DFC GeoSpec Coated rotors with 4000 HybriDynamic brake pads, ensuring all components are designed to work together for smooth, quiet operation. The GeoSpec coating provides a high level of protection against salt and moisture, far exceeding conventional paint or zinc finishes.

• 4000 HybriDynamic Pads: Features a hybrid formulation for excellent stopping power and is scorched during manufacturing to minimize the initial break-in period.
• GeoSpec Coated Rotors: Engineered with premium G3000/G11H18 iron castings, these rotors are 100% precision cut and mill-balanced for zero vibration.
• Advanced Noise Reduction: Equipped with DFC premium rubber-steel-rubber shims and chamfered/slotted designs to improve NVH (noise, vibration, and harshness) characteristics.
• Comprehensive Hardware: Includes stainless steel abutment clips and hardware to reduce drag, improve fuel efficiency, and prevent premature wear.
• Installation Ready: Rotors are ready to install with no additional pre-degreasing required, saving time in the shop.
• Safety Standard: 100% asbestos-free formulation designed to meet the same form, fit, and function as OEM components.

This DFC Complete Rear Brake Kit provides a professional-grade solution for restoring braking performance and corrosion resistance on select 2002-2025 Nissan Altima, Juke, Maxima, and Sentra models. By pairing GeoSpec coated rotors with 4000 Series HybriDynamic pads, this kit addresses common issues like brake pulsation, excessive dust, and rotor oxidation.

The included GeoSpec rotors are engineered from premium G3000/G11H18 iron castings for maximum structural stability. Each rotor is 100% mill-balanced to ensure vibration-free operation and features a non-directional finish for faster pad-to-rotor mating. The proprietary GeoSpec coating provides a durable barrier against rust and corrosion, far outperforming conventional zinc plating or paint.

The HybriDynamic 4000 Series pads are scorched during manufacturing to remove uncured bonding agents, significantly shortening the initial break-in period. These 100% asbestos-free pads utilize premium rubber-steel-rubber shims and chamfered/slotted designs to minimize NVH (noise, vibration, and harshness). This kit includes all necessary stainless steel hardware and rubber-coated abutment clips for a complete, quiet installation.

• Fitment: Fits select 2002-2025 Nissan Altima, 2011-2017 Juke, 2004-2008 Maxima, and 2007-2019 Sentra.
• Rotor Material: G3000/G11H18 iron castings with mill-balancing for zero vibration.
• Corrosion Protection: GeoSpec coating for superior resistance to road salt and moisture.
• Brake Pads: 4000 Series HybriDynamic scorched pads for immediate stopping power.
• Hardware Included: Stainless steel abutment clips and rubber-steel-rubber shims.
• Installation: Ready to install with no pre-degreasing required; meets OEM form, fit, and function.

Fits select 2022-2023 Genesis G70 and Kia Stinger models (2.5T).

This complete set of DFC front and rear brake rotors provides a direct replacement for your vehicle's factory braking components. Engineered to match original equipment specifications, these rotors restore the consistent stopping power and thermal stability required for the 2.5T drivetrain. Whether you are performing a routine brake service or addressing warped discs, this set ensures balanced braking performance across both axles.

• Complete set including both front and rear rotors
• Direct bolt-on replacement for factory hardware
• Precision machined for smooth operation and reduced vibration
• Designed specifically for 2.5T powertrain requirements
• Maintains original braking feel and heat dissipation characteristics

Fits select 2004-2012 Subaru Baja, Forester, Impreza, Legacy, and Outback models including Turbo, WRX, and 3.0 R trims.

This DFC Front Brake Kit provides a comprehensive solution for restoring braking performance and long-term reliability. By pairing GeoSpec coated rotors with 4000 Series HybriDynamic pads, this kit addresses common issues such as surface corrosion, excessive noise, and pedal vibration. Each component is engineered to match OEM form and function, ensuring a direct-fit installation without modifications.

• GeoSpec Coated Rotors: Cast from premium G3000/G11H18 iron, these rotors are 100% precision cut and mill-balanced for vibration-free operation. The GeoSpec coating provides superior corrosion resistance compared to traditional zinc plating.
• 4000 Series HybriDynamic Pads: These 100% asbestos-free pads are scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period and providing consistent bite from the first stop.
• Advanced NVH Control: Equipped with premium rubber-steel-rubber shims and a non-directional finish to eliminate brake squeal and promote smooth engagement.
• Complete Hardware Kit: Includes stainless steel abutment clips and hardware to reduce drag, improve fuel efficiency, and prevent premature pad wear.

Fits select 2010-2015 Subaru BRZ, Forester, Impreza WRX, Legacy, and Outback models.

This complete front and rear brake kit combines DFC GeoSpec Coated Rotors with 5000 Advanced Brake Pads to provide a balanced, ready-to-install solution for daily driving and light-duty use. By matching OE-spec iron castings with scorched friction material, this kit ensures consistent pedal feel and reliable stopping power without the need for intensive break-in or degreasing.

• GeoSpec Coated Rotors: Formulated with G3000/G11H18 cast iron for thermal stability. The silver-gray finish is applied to prevent corrosion and is ready to install out of the box with no oil cleanup required.
• Precision Machining: Each rotor features a non-directional finish for even pad bed-in and is 100% electronic mill-balanced to prevent vibration.
• 5000 Advanced Brake Pads: Formulated for balanced braking across both axles, these pads are scorched to remove uncured bonding agents, providing immediate friction performance from the first stop.
• Premium Hardware: Includes stainless steel hardware and rubber-coated abutment clips to reduce drag and noise. Premium Rubber-Steel-Rubber (RSR) shims effectively isolate vibration.
• Safe and Quiet: 100% asbestos-free formulation with chamfered and slotted designs (where applicable) to minimize braking noise.

Each kit includes four GeoSpec coated rotors (front and rear), a full set of 5000 Advanced pads, and all necessary installation hardware.