Fits 2001-2004 Chevrolet Corvette C5 models with a 6-speed manual transmission, including Base, Z06, and 50th Anniversary editions.

Engineered for high-performance street and track applications, this DSS 3.5-inch Aluminum Heavy Duty Driveshaft is designed to handle the increased torque and RPM demands of modified C5 Corvettes. Constructed from high-strength aluminum, this shaft replaces the factory internal components to provide superior durability and weight savings compared to the original equipment. It is precision-balanced to ensure smooth power delivery and to eliminate vibrations common in aging driveline setups.

• Specifically designed for C5 6-speed manual transmissions
• 3.5-inch diameter aluminum construction for high-torque capacity
• Heavy-duty design for improved driveline reliability
• Manufacturer Part Number: 610082
• Reference Code: GMC5M-2-E

Vehicle Fitment

Fits 2001-2004 BMW M3 Base (E46) models equipped with a 6-speed manual transmission.

This DSS carbon fiber CV driveshaft is engineered to optimize the drivetrain performance of the E46 M3. By replacing the heavy, multi-piece factory assembly with a lightweight, high-torsion carbon fiber tube, this driveshaft significantly reduces rotational mass and parasitic power loss. The result is improved throttle response and more efficient power delivery to the rear wheels.

Built to handle the stresses of high-performance driving, this unit features a precision-engineered 6-bolt rear CV joint. This design provides superior stability compared to standard U-joints, minimizing drivetrain vibration and ensuring consistent performance under heavy load. The carbon fiber construction also offers natural dampening properties, smoothing out the torque spikes often felt in high-horsepower manual-transmission applications.

• High-strength carbon fiber tube construction
• Precision 6-bolt rear CV joint for robust power transfer
• Designed specifically for 6-speed manual transmission models
• Reduces drivetrain weight and rotational inertia
• Direct-fit for the E46 M3 chassis
• Manufacturer Part Number: 610077
• Model Number: BMWSH4-CV-C

Fits 1999-2004 Ford F-150 SVT Lightning models equipped with the 4R100 transmission.

This DSS (The Driveshaft Shop) 1-piece aluminum driveshaft is engineered to replace the heavy factory unit with a lightweight, high-strength solution capable of supporting up to 1,000 wheel horsepower. By utilizing high-grade 4-inch diameter aluminum tubing and heavy-duty 1350 series U-joints, this shaft significantly reduces rotational mass for improved throttle response and acceleration while increasing the critical speed threshold over OEM components.

• 4-inch diameter aluminum tubing construction
• Engineered for high-performance applications rated up to 1000whp
• Heavy-duty 1350 series U-joints for maximum torque capacity
• 1-piece design eliminates the complexity and weight of multi-piece shafts
• Precision balanced to ensure smooth operation at high RPM
• Specific fitment for 4R100 transmission-equipped models
• Manufacturer Part Number: 610071 (Reference: FDSH28-A)

Fits 1995-1999 BMW M3 Base and Lightweight models equipped with a 5-speed manual transmission.

This DSS 1-piece chromoly driveshaft is engineered to replace the heavy, complex multi-piece factory unit found in the E36 M3. By converting to a single-piece design, you eliminate the common failure point of the center support bearing (CSB) and reduce rotational mass for improved throttle response and more direct power delivery to the rear wheels. This shaft features the 4-bolt rear flange and is precision balanced to ensure smooth operation across the RPM range.

• High-strength chromoly steel construction
• Serviceable 1-piece design eliminates center support bearing issues
• Specifically for 5-speed manual transmission models
• Equipped with a 4-bolt rear CV flange
• Manufacturer Part Number: 610053

Fits 1993-2001 Subaru Impreza models (Base, Brighton, L, LS, LX, Outback, RS) equipped with a 6-speed manual transmission swap and R180 rear differential.

Engineered for high-performance GC8 builds, this DSS (The Driveshaft Shop) carbon fiber driveshaft is the definitive solution for enthusiasts running 6-speed transmission swaps with an R180 rear differential. By replacing the heavy, multi-piece factory unit with a lightweight single-piece carbon fiber assembly, you significantly reduce rotational mass. This reduction translates directly into crisper throttle response, faster acceleration, and less parasitic loss throughout the drivetrain.

• Constructed from high-modulus carbon fiber for exceptional torsional strength and weight savings
• Designed specifically for the geometry of 6-speed manual swaps paired with R180 differentials
• Eliminates the factory center support bearing for a more efficient, direct power path
• Precision-balanced to ensure smooth, vibration-free operation at high RPMs
• Features heavy-duty U-joints and CNC-machined mounting yokes for maximum durability
• Manufacturer Part Number: 610020 (SUSH8-C)

Fits 1989-1994 Nissan Skyline R32 GT-R AWD models.

The DriveShaft Shop (DSS) aluminum driveshaft is engineered to replace the heavy, multi-piece factory unit with a lightweight, high-strength solution. By significantly reducing rotational mass and parasitic drag, this upgrade improves throttle response and drivetrain efficiency. This single-piece design eliminates the carrier bearing found in the original equipment, which is a common failure point in high-performance applications.

• Fabricated from high-grade aluminum for superior strength-to-weight ratio
• Precision balanced to eliminate high-speed drivetrain vibration
• Direct replacement for the factory AWD driveshaft assembly
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 610013 (NISH10-A1)

Fits 1989-1994 Nissan 240SX S13 (KA24/SR20 5-Speed Non-ABS).

This The DriveShaft Shop (DSS) steel driveshaft is a rugged 1-piece replacement designed to eliminate the common failure points of the factory two-piece assembly. By removing the center carrier bearing, this shaft reduces driveline vibration and improves throttle response in your S13 chassis. Engineered specifically for non-ABS vehicles equipped with a 5-speed manual transmission and either the KA24 or SR20 engine, this unit handles the increased torque of modified builds while maintaining reliable street performance.

• Manufacturer Part Number: 610010 (NISH1-S)
• Material: High-strength steel
• Configuration: 1-Piece design
• Fitment: 1989-1994 Nissan 240SX (S13)
• Transmission Compatibility: 5-Speed Manual
• Brake System: Non-ABS only
• Engine Compatibility: KA24DE, KA24E, or SR20DET

Fits 2006-2007 Mazda 6 Mazdaspeed models.

This high-performance rear axle from The DriveShaft Shop (DSS) is engineered to handle the increased torque loads of modified 2006-2007 Mazdaspeed 6 drivetrains. Rated for up to 500 horsepower, this right-side (passenger side) axle provides a significant durability upgrade over the factory units, which are often the weak point when launching or adding power to the AWD platform.

Built with precision-ground components and high-grade materials, this axle is designed as a direct replacement for the original equipment. It maintains correct suspension geometry while offering the resilience needed for street-performance and track applications.

• Position: Rear Right
• Horsepower Rating: 500HP
• Application: Performance/Racing upgrade
• Manufacturer Part Number: 510361
• Interchange Part Number: RA6286L2

Fits 2006-2007 Mazda 6 Mazdaspeed.

Engineered to handle high-torque applications, The DriveShaft Shop 500HP Left Rear Axle is a heavy-duty drivetrain upgrade designed for enthusiasts pushing their Mazdaspeed 6 beyond factory limits. This axle replaces the vulnerable OEM unit with a high-strength alternative rated for up to 500 horsepower, providing the reliability needed for hard launches and track use. It is a direct-fit component that installs into the factory mounting points without modification.

• Position: Rear Left (Driver Side)
• Performance Rating: 500HP
• Fits 2006-2007 Mazdaspeed 6 models
• High-strength construction to prevent axle snap under load
• Manufacturer Part Number: 510360 (RA6285L2)

Fits 2009-2015 Cadillac CTS-V models.

Engineered for high-horsepower builds, The Driveshaft Shop (DSS) Level 5 axle is designed to replace the factory drivetrain components that often fail under extreme stress. This heavy-duty left-side axle is rated to handle up to 1400HP, making it an essential upgrade for drag racing and high-performance street applications where maximum torque transfer is required.

This specific axle features large-diameter bars to provide superior torsional strength and eliminate axle wrap. Built with precision tolerances, it integrates with the factory drivetrain while offering the durability needed for modified CTS-V platforms.

• Series: Level 5
• Position: Left (Driver Side)
• Power Rating: 1400HP
• Design: Large diameter axle bars
• MPN: 510270 (RA5268X5)
• Compatibility: Direct fit for 2009-2015 Cadillac CTS-V

Fits 2005-2007 Subaru Impreza WRX STI and WRX STI Limited (GD Sedan).

The DriveShaft Shop (DSS) Level 5 Front Axle is a heavy-duty drivetrain solution designed for high-performance builds. Rated to handle up to 750HP, this axle replaces the factory unit to provide the strength and reliability required for high-torque launches and competitive track use. Engineered for the GD-chassis STI, it addresses the common failure points of OE axles when power levels are significantly increased.

• Product Series: Level 5
• Position: Front
• Power Rating: 750HP
• Fitment: GD Sedan Chassis
• Manufacturer Part Number: 510223
• Legacy Part Number: RA8523X5

Fits 2004-2006 Pontiac GTO Base models.

Strengthen your drivetrain and eliminate traction-robbing wheel hop with The Driveshaft Shop (DSS) 1000HP Anti-Wheel Hop Axle Kit. Engineered specifically for the 2004-2006 Pontiac GTO, these heavy-duty axles are designed to handle high-horsepower street and track applications while significantly improving stability during hard launches in the factory IRS configuration.

• Rated for up to 1000HP
• Engineered to mitigate harmonic resonance and eliminate wheel hop
• Direct-fit replacement for factory rear axles
• Heavy-duty construction for extreme performance demands
• Manufacturer Part Number: 510207
• Reference Number: GM41

Fits select 1993-2007 Subaru Impreza and WRX models (Base, Brighton, L, LS, LX, Outback, RS, WRX, Limited, TR) equipped with an R180 rear differential.

The Driveshaft Shop (DSS) 500HP rear axle is engineered for high-performance Subaru applications, providing a robust solution for enthusiasts performing R180 differential swaps or running high-output engine setups. This axle is designed to handle the increased torque and stress of modified builds, ensuring reliable power delivery to the ground where factory components often fail.

• Horsepower Rating: 500HP
• Differential Compatibility: R180 Rear
• Chassis Fitment: GC8 and GDA/GDB platforms
• Build Quality: Enhanced torsional strength for drag and street performance
• Manufacturer Part Number: 510195

Fits select 1993-2003 Subaru Impreza (Base, Brighton, L, LS, LX, Outback, RS) and 2002-2003 WRX models.

The Driveshaft Shop (DSS) Level 5 Front Axle is a heavy-duty drivetrain solution designed for high-horsepower builds that have surpassed the limits of factory equipment. Rated to handle up to 750HP, this left-side front axle is engineered to withstand the extreme torque loads of aggressive launches and track use. It serves as a direct-fit performance upgrade for the GC8 and GD chassis, replacing the stock axle with a high-strength assembly that minimizes the risk of snapped shafts or CV failure.

• Manufacturer Part Number: 510179 (RA8520L5)
• Power Rating: 750HP
• Series: Level 5
• Position: Front Left (Driver Side)
• Applications: Fits GC8 and GD Sedan platforms
• Construction: High-grade materials designed for extreme torsional loads

Fits 2003-2006 Mitsubishi Lancer Evolution models, including MR, RS, and SE trims (Evo VII / VIII / IX).

The Driveshaft Shop (DSS) Basic Level 0 Front Right Axle is engineered as a direct-fit replacement for the factory CV axle on the Mitsubishi Evolution platform. Designed for daily driven applications and street use, this axle addresses the common issues of clicking or vibration caused by worn or damaged OE CV joints. It maintains factory-spec dimensions to ensure a seamless installation into the factory hub and transmission splines without modification.

Built with high-quality internal components and durable boots, the Level 0 series offers a reliable solution for owners seeking to restore drivetrain integrity without the premium cost of racing-grade axles. Each unit is precision-assembled to meet the specific tolerances required for the Evo VII, VIII, and IX chassis.

• Position: Front Right (Passenger Side)
• Series: Basic Level 0
• MPN: 510175
• Alternate Part Number: RA9854L0
• Compatibility: Replaces factory front right axle

Fits 2003-2006 Mitsubishi Lancer Evolution, including MR, RS, and SE models.

The Driveshaft Shop (DSS) Basic Level 0 Axle is a direct-fit replacement for the front left (driver side) CV axle. Designed for Evolution VIII and IX owners who need a dependable alternative to expensive factory units, this axle restores smooth power delivery for daily driving and light street performance. Every axle features precision-machined splines and high-grade CV boots to ensure a proper seal and long service life.

• Series: Basic Level 0
• Position: Front Left (Driver Side)
• Fitment: 2003-2006 Mitsubishi Lancer Evolution (all submodels)
• Manufacturer Part Number: 510174
• DSS Part Number: RA9853L0
• Design: Replaces factory OE axle with no modifications required

Fits 1992-1995 Honda Civic (CX, DX, EX, LX, Si, VX) with K-Series engine swaps using EKK2 mounts.

The DriveShaft Shop (DSS) Level 0 Basic Axle is engineered as a reliable, budget-friendly solution for enthusiasts performing a K-Series swap in the 1992-1995 Honda Civic (EG) chassis. Specifically designed for use with EKK2 mounting kits, this left-side (driver-side) axle features the correct length and spline configuration to ensure proper engagement and geometry, preventing the premature wear often seen with makeshift axle combinations.

• Manufacturer Part Number: 510072 / RA4001L0
• Side: Left (Driver Side)
• Series: Level 0 Basic Axle
• Application: K-Series Swaps with EKK2 Mounts
• Chassis Compatibility: 1992-1995 Honda Civic (all models)

Each axle is built to handle the torque of a K-swap in a street environment, featuring high-quality CV joints and durable boots to maintain lubrication and exclude contaminants. This is a direct-fit component for K-swapped EGs requiring a specific length offset for the EKK2 mount position.