Fits select 1952-1990 Ford, GMC, Chevrolet, Buick, Oldsmobile, and AMC vehicles designed for small cubic-inch single carburetor applications.

The Edelbrock AVS2 Series 500 CFM carburetor (MPN 1901) is engineered for improved throttle response and fuel atomization. This non-EGR unit features annular flow boosters that eliminate flat spots, providing a smoother transition from idle to part-throttle. Designed to match perfectly with Edelbrock Performer or Performer EPS manifolds, this carburetor includes both timed and full vacuum ports to accommodate various ignition advance setups.

• Flow Rating: 500 CFM
• Choke Type: Electric
• Finish: Satin
• Primary Metering Jets: .095
• Secondary Metering Jets: .095
• Primary Metering Rods: .070 x .052
• Step-Up Spring: Orange (5" Hg)
• Calibration: Single-quad applications
• Part Number: 1901

The Edelbrock 1725 Performer RPM Series mechanical fuel pump is a high-performance solution engineered for 1963-1987 Ford 289-351 Windsor V8 engines. Specifically designed to optimize fuel delivery for Edelbrock carburetors in Performer or Performer RPM applications, this high-volume pump supports engine builds up to 600 horsepower.

Constructed with a premium three-stage polished finish, this pump features a unique internal valve design that improves both flow quantity and quality. It maintains a steady 6 psi output, surpassing the capacity of conventional models and eliminating the need for an external fuel pressure regulator. For easier routing in tight engine bays, the lower housing is clockable and can be rotated in 60-degree increments to achieve the ideal inlet and outlet alignment.

• MPN: 1725
• Series: Performer RPM
• Engine Fitment: Ford 289-351W V8
• Maximum Power: Supports up to 600 HP
• Output Pressure: 6 psi (no regulator required)
• Port Size: 3/8 inch NPT inlet and outlet
• Housing: Clockable lower housing (60° increments)
• Finish: Three-stage polished finish
• Fuel Type: Gasoline only

Fits select 1980-1988 Chevrolet, GMC, and Buick models equipped with Small-Block or W-Series V8 engines. Designed specifically for use with Edelbrock Performer and Performer RPM carburetors, this high-performance mechanical fuel pump provides the volume and reliability required for street performance engines.

The Edelbrock #1721 features a unique valve design that improves both the quantity and quality of fuel flow, capable of supporting engines up to 600 hp. The high-volume 3/8" NPT inlet and outlet ports surpass the capacity of conventional factory models. This pump produces a consistent 6 psi, eliminating the need for an external fuel pressure regulator. For easier installation and plumbing, the lower housing is clockable and can be rotated in 60-degree increments to achieve the best inlet/outlet alignment for your engine bay.

• Compatibility: Small-Block Chevrolet and "W Series" (348/409) engines
• Performance: Supports up to 600 HP
• Output: 6 psi (no regulator required)
• Port Size: 3/8" NPT inlet and outlet
• Finish: High-quality three-stage polished finish
• Adjustability: Clockable lower housing in 60° increments
• Fuel Type: Gasoline or mixed fuels only
• Part Number: 1721

The Edelbrock E-Force Supercharger Pulley (MPN 15822) allows you to fine-tune the airflow and boost performance of your supercharger system. Specifically designed for use with Edelbrock Professional Tuner (Pro Tuner) systems, this 3.00-inch pulley provides a critical adjustment point for builders and tuners looking to customize their power delivery.

Constructed for maximum traction and stability, the 6-rib design helps prevent belt slip to maintain consistent boost levels. The pulley is finished in a black anodized coating for superior durability and corrosion resistance in high-heat engine environments.

• Diameter: 3.00 inches
• Rib Profile: 6-Rib
• Finish: Black Anodized
• Application: Edelbrock Pro Tuner Systems
• Part Number: 15822

The Edelbrock 15405 Universal Heat Exchanger is engineered for high-performance street applications, providing critical thermal management for Edelbrock Universal or Enforcer supercharger systems. Featuring a high-efficiency single-pass, single-row design, this unit is rated to deliver 31,000 BTU/hr of heat dissipation to help maintain consistent intake air temperatures.

Built for durability and versatile installation, the assembly includes eight M6x1.0 threaded bungs for secure mounting in various custom configurations. The 3/4-inch barbed inlet and outlet ports provide a reliable connection point for standard intercooler plumbing, making it an essential component for custom forced induction setups.

• Design: Single Pass, Single Row
• Heat Dissipation: 31,000 BTU/hr
• Dimensions: 22.0" W x 16.5" H x 1.5" D
• Fittings: 3/4" Barbed Inlet and Outlet
• Hardware: 8 integrated M6x1.0 threaded mounting bungs
• Application: Universal for Edelbrock or custom supercharger systems
• Manufacturer Part Number: 15405

Fits 1994-2001 Acura Integra GS-R and Type R models.

Edelbrock 15042 intake manifold gaskets are engineered to provide a reliable, leak-free seal between the cylinder head and the intake manifold. These high-performance gaskets are the same units Edelbrock supplies with their aftermarket intakes and cylinder heads, ensuring a professional-grade fit and finish during installation. They are specifically matched to provide optimal port alignment and durability for high-revving Honda/Acura B-Series engines.

• Manufacturer Part Number: 15042
• Engineered for a perfect seal to prevent vacuum leaks
• Matched to manifold and cylinder head ports
• Direct replacement for factory gaskets or used with Edelbrock performance components
• Compatible with B18C1 and Type R configurations

Fits select 1968-1987 Ford, Lincoln, and Mercury vehicles with cable-operated throttle and automatic transmissions (except A.O.D. models).

The Edelbrock 1483 Throttle Lever Adapter is engineered to provide the correct linkage geometry when installing Edelbrock Performer Series or AVS2 carburetors on vintage Ford applications. This adapter ensures smooth throttle response and maintains the proper leverage required for cable-operated systems and automatic transmission kickdown functionality.

• Designed specifically for Edelbrock Performer Series and AVS2 carburetors
• Compatible with factory cruise control systems
• Gold iridited finish for corrosion resistance and a period-correct match to Edelbrock carburetors
• Essential for correcting throttle pull and maintaining transmission shift points
• Replaces manufacturer part number 1483
• Note: Requires use with an appropriate throttle cable plate where necessary

The Edelbrock Performer Series (EPS) Linkage Assortment Kit is a specialized hardware set designed for enthusiasts and technicians rebuilding or tuning EPS carburetors. This kit provides the necessary components to restore smooth throttle response and ensure proper secondary engagement by replacing worn, bent, or missing linkage rods and clips.

Manufactured to exact tolerances, these components maintain the precise geometry required for reliable carburetor operation. Whether you are performing a routine overhaul or correcting a custom installation, this assortment offers a comprehensive selection of links to match your specific configuration.

• Designed specifically for Edelbrock Performer Series (EPS) carburetors
• Includes 7 unique linkage rods (1 of each style)
• Includes 6 durable retaining clips for secure installation
• Ideal for linkage repair, maintenance, or custom tuning projects
• Manufacturer Part Number: 1473

The Edelbrock 1409 Marine Series 600 CFM carburetor is engineered specifically to withstand the rigorous demands of marine environments. This 4-barrel carburetor features an electric choke and a two-piece, all-aluminum body that is iridited for superior corrosion resistance. Unlike automotive carburetors, the 1409 is designed with PTFE-coated shafts and pump arms to prevent binding in salt or freshwater conditions.

• Precision Calibration: Utilizes metering rods to transition between circuits, making it unaffected by engine backfires with no power valves to blow out.
• Durable Construction: Lightweight aluminum body with a gold iridited finish and PTFE-coated components for maximum protection.
• Consistent Performance: Designed to "hold a tune," ensuring calibration remains unchanged for reliable, trouble-free operation on the water.
• Serviceability: Features tub-type bowls and rear-pivot floats; metering rods can be changed in seconds without removing the carburetor or draining fuel.
• Included: Every new unit comes with an Installation and Tuning DVD.

Manufacturer Part Number: 1409

Fits select 1980-1989 Avanti, Buick, Cadillac, Chevrolet, Chrysler, DeTomaso, Dodge, GMC, and Oldsmobile models.

The Edelbrock 1406 Performer Series 600 CFM carburetor is engineered for consistent street performance and daily drivability. Built with a lightweight, two-piece all-aluminum body, this carburetor resists warping and is fully compatible with gasohol and blended fuels. Its unique design uses metering rods to transition between circuits, making it immune to engine backfires since there are no power valves to blow out. These rods can be swapped in seconds for fine-tuning without draining fuel or removing the carburetor from the intake manifold.

• Manufacturer Part Number: 1406
• Flow Rating: 600 CFM
• Choke Type: Electric
• Finish: Satin
• Number of Barrels: 4-Barrel
• Body Material: Two-piece all-aluminum construction
• Bowl Style: Tub-type bowls with rear-pivot floats
• Calibration: Performance-tuned to stay tuned for reliable street operation

Designed for easy maintenance and long-term reliability, the Performer Series #1406 is a favorite among enthusiasts who need a user-friendly carburetor that maintains its calibration over time. It is compatible with a wide range of V8 engines across domestic applications from 1980 to 1989.

The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is engineered for consistent, reliable street performance on a wide range of small-block and mid-displacement engines. This 4-barrel carburetor features a lightweight, two-piece all-aluminum body that resists warping and is fully compatible with gasohol and blended fuels.

Designed for the hands-on enthusiast, the Performer Series utilizes metering rods to transition between circuits, making it virtually unaffected by engine backfires. This design eliminates the risk of blown power valves and allows for rapid tuning adjustments; rods can be swapped in seconds without removing the carburetor or draining fuel. The simple tub-type bowls and rear-pivot floats ensure the unit holds its tune over long-term daily driving.

• Part Number: 1405
• CFM Rating: 600 CFM
• Choke Type: Manual
• Barrel Count: 4-Barrel
• Finish: Satin
• Construction: Two-piece all-aluminum body
• Features: Metering rod transition, tub-type bowls, and rear-pivot floats
• Fitment: Select 1980-1989 Buick, Cadillac, Chevrolet, Chrysler, DeTomaso, Dodge, GMC, and Mercury models

Each unit is quality-built in the U.S.A. for user-friendly operation and long-term calibration stability.

Fits select 1980-1990 Buick, Cadillac, Chevrolet, GMC, and Ford vehicles with 5-1/8 inch carburetor necks.

The Edelbrock Pro-Flo Series #1223 air cleaner offers a classic, show-quality appearance for performance engines. This 14-inch round assembly features a triple chrome-plated steel top and is engineered to fit all popular 5-1/8 inch diameter carburetors, including Edelbrock Performer and Thunder Series AVS, Holley, Thermo-Quad, Quadrajet, and Carter AFB. The 3.75-inch height is measured from the gasket flange to the top of the supplied retaining nut, and the dropped-base design is ideal for applications requiring additional hood clearance.

• Triple chrome-plated steel top for durability and a high-luster finish.
• 14-inch diameter with a high-flow paper filter element.
• 3.75-inch total height (measured gasket flange to retaining nut).
• Air cleaner base includes knock-outs for use with Edelbrock crankcase ventilation adapter #1205 (sold separately).
• Compatible with 5.125-inch (5-1/8") diameter carburetor necks.
• Manufacturer Part Number: 1223