Fits 2006-2011 Honda Civic Si.

Improve your vehicle's cornering response and stability with the Energy Suspension Hyper-Flex 27mm front sway bar bushing set. Standard OEM rubber bushings are prone to compression and distortion under load, which creates a delay in sway bar activation. By replacing them with firm polyurethane, your sway bar system operates at maximum efficiency, effectively reducing body roll and providing more predictable handling characteristics.

• Manufactured from proprietary Hyper-Flex polyurethane for increased durability over rubber
• Resistant to automotive fluids, road salt, and environmental debris
• Engineered for a precise fit on factory 27mm front sway bars
• Red finish for a performance-oriented appearance
• Replaces worn OE bushings to restore and enhance steering precision
• Manufacturer Part Number: 16.5148R

Fits 2004-2005 Acura TSX Base.

Energy Suspension front sway bar bushings are engineered to replace soft, factory rubber components that deflect under load and degrade over time. By utilizing proprietary Hyper-Flex polyurethane, this 25.4mm (1in) bushing set significantly reduces compliance in the sway bar system, allowing the bar to work at its maximum efficiency for flatter cornering and improved steering response.

• Manufactured from high-performance Hyper-Flex polyurethane for long-lasting durability
• Reduces body roll and improves handling characteristics without a full bar replacement
• Resistant to road oils, salts, and environmental contaminants that destroy OEM rubber
• Specifically sized at 25.4mm (1in) for precision fitment on the front sway bar
• Easy bolt-on installation into factory mounting locations
• Includes two red polyurethane bushings
• Manufacturer Part Number: 16.5137R

Fits 2002-2004 Acura RSX Base and Type-S models.

Improve your suspension's responsiveness with Energy Suspension 19mm Rear Sway Bar Bushings. These components are designed to replace soft, compliant factory rubber bushings that tend to distort and degrade over time. By utilizing Energy’s proprietary Hyper-Flex polyurethane, these bushings ensure your rear sway bar reacts more quickly to cornering loads, effectively reducing body roll and sharpening handling characteristics without the need for a full sway bar replacement.

• Bar Diameter: 19mm
• Position: Rear
• Material: Hyper-Flex Polyurethane
• Color: Red
• Manufacturer Part Number: 16.5132R
• Direct replacement for OE rubber bushings
• Resistant to road oils, salt, and contaminants that degrade rubber

Fits 2000-2009 Honda S2000 Base and CR models.

Upgrade your suspension with the Energy Suspension Hyper-Flex Front Control Arm Bushing Set. These performance polyurethane bushings replace soft factory rubber units that are prone to deflection, ensuring your vehicle maintains proper alignment and suspension geometry under heavy cornering, braking, and acceleration. This set is engineered to improve steering response and overall handling precision on both the street and the track.

Constructed from Energy's proprietary Hyper-Flex polyurethane, these bushings are significantly more durable than OE rubber and are resistant to road contaminants and automotive fluids. The full-floating, non-binding design allows for smoother suspension articulation and more efficient operation.

• Maintains Alignment: Prevents bushing deflection to keep tires in contact with the road.
• Hyper-Flex Polyurethane: High-performance material that outlasts and outperforms standard rubber.
• Full Floating Design: Provides non-binding, smooth suspension movement for better control.
• Installation: Fits into existing factory control arms; replaces worn front-end bushings.
• Finish: Black
• Manufacturer Part Number: 16.3120G

Fits 1997-2001 Honda Prelude Base and Type SH models.

Restore steering precision and suspension geometry with the Energy Suspension Hyper-Flex front control arm bushing set. Unlike factory rubber bushings that deflect under load and degrade over time, these performance polyurethane bushings maintain consistent alignment during aggressive cornering and daily driving. The full-floating, non-binding design ensures smooth suspension travel and improved tactile feedback through the steering wheel.

• Material: Hyper-Flex performance polyurethane
• Color: Red
• Design: Full-floating and non-binding for efficient operation
• Benefit: Maintains proper alignment under extreme street and track conditions
• Performance: Outlasts standard rubber and improves overall vehicle control
• Installation: Fits into existing stock control arms
• Manufacturer Part Number: 16.3119R

Fits 1999-2000 Honda Civic Si.

Replace compliant, aged factory rubber with the Energy Suspension Hyper-Flex Front Control Arm Bushing Set to restore steering precision and suspension geometry. These red polyurethane bushings are engineered to maintain proper alignment during aggressive cornering, heavy braking, and high-load maneuvers on the street or track. Unlike standard rubber components that deflect under stress, these bushings offer a full-floating, non-binding design for smoother, more efficient suspension travel and improved overall vehicle control.

• Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane for superior durability
• Resistant to vehicle fluids, road salt, and environmental degradation that destroys rubber
• Maintains consistent alignment settings under extreme conditions
• Full-floating design prevents binding for linear suspension movement
• Complete set for front control arm positions
• Finish: Red
• Manufacturer Part Number: 16.3115R

Fits 1999-2000 Honda Civic Si.

Tighten up your suspension response with the Energy Suspension Hyper-Flex front control arm bushing set. These performance polyurethane bushings are designed to replace compliant factory rubber units that soften and degrade over time. By reducing unwanted deflection, this set helps maintain precise alignment geometry under extreme cornering and braking loads, resulting in sharper steering and improved chassis control.

The Hyper-Flex polyurethane material is engineered for longevity and resistance to oil, road salt, and ozone. Unlike rubber, these bushings feature a full-floating design to ensure smooth suspension travel without binding, making them an essential upgrade for both spirited street driving and track use.

• Improves vehicle handling, cornering, and overall control
• Maintains better wheel alignment under load
• Full-floating and non-binding design for efficient operation
• Durable Hyper-Flex performance polyurethane construction
• Fits into the original equipment control arms
• Manufacturer Part Number: 16.3115G
• Color: Black

Fits 1992-2001 Honda Prelude models including S, SE, Si, Si 4WS, VTEC, Base, and Type SH.

Replace worn, mushy factory rubber with the Energy Suspension Rear Control Arm Bushing Set to restore precision to your suspension. These bushings are engineered from Energy Suspension's proprietary Hyper-Flex performance polyurethane, which is resistant to road contaminants, oils, and the atmospheric conditions that cause standard rubber to rot and fail. By maintaining proper suspension geometry under extreme cornering and braking loads, these bushings improve vehicle handling, alignment consistency, and overall control.

The full-floating design ensures smooth, efficient operation without the binding common in stiff rubber components. This kit is designed to install directly into your existing factory control arms, providing a durable upgrade for street, track, or spirited driving applications.

• Part Number: 16.3112R
• Material: Hyper-Flex Performance Polyurethane
• Color: Red
• Design: Full-floating and non-binding
• Improves cornering, handling, and alignment retention
• Outlasts and outperforms original equipment rubber

Fits 1992-1995 Honda Civic, 1993-1997 Honda Civic del Sol, and 1994-2001 Acura Integra.

Energy Suspension Hyper-Flex™ polyurethane sway bar bushings and end links offer a substantial improvement in handling and suspension response compared to factory rubber. By replacing soft, compliant OE bushings with high-durometer polyurethane, this set allows your vehicle's sway bar system to work at maximum efficiency, reducing body roll and improving turn-in precision without the cost of a full aftermarket sway bar replacement.

These components are engineered to maintain better alignment geometry while driving and are designed as a full-floating, non-binding solution. The Hyper-Flex™ material is resistant to oils, road salt, and ozone, ensuring these bushings far outlast original rubber equipment while fitting directly into the stock control arms.

• Replaces soft OEM rubber to minimize sway bar deflection
• Improves handling characteristics and cornering stability
• Hyper-Flex™ polyurethane construction for maximum durability
• Full-floating and non-binding design
• Maintains precise alignment under suspension load
• Direct fit for factory mounting points
• Manufacturer Part Number: 16.3105G

Fits 1988-1991 Honda Civic and CRX (all submodels including Base, DX, EX, LX, Si, HF, and Wagovan).

Restore steering precision and eliminate suspension slop with the Energy Suspension Hyper-Flex front control arm bushing set. Factory rubber bushings are prone to dry-rotting and excessive deflection, which leads to unwanted alignment changes under load. These red polyurethane replacements are engineered to maintain proper geometry during aggressive cornering, heavy braking, and spirited street driving.

The full-floating, non-binding design ensures that the bushings do not seize or restrict movement, allowing the control arms to pivot smoothly for improved suspension response. Constructed from Energy’s proprietary Hyper-Flex polyurethane, these components significantly outlast standard rubber and are highly resistant to oil, road salt, and ozone.

• Direct replacement for worn factory front control arm bushings
• Full floating and non-binding design for efficient suspension travel
• Maintains consistent alignment settings under extreme conditions
• Made from durable, performance-grade Hyper-Flex polyurethane
• Resistant to automotive fluids and environmental degradation
• Manufacturer Part Number: 16.3103R
• Color: Red

Fits select 1996-2000 Honda Civic (CX, DX, EX, GX, HX, LX, and Value Package).

Replace soft, aging factory rubber with the Energy Suspension Hyper-Flex Master Bushing Set (16.18110G). This comprehensive kit utilizes high-performance polyurethane to maintain precise suspension geometry under load. By minimizing unwanted deflection, this set helps preserve your caster and camber alignment settings during hard cornering, heavy braking, and rapid acceleration.

Unlike standard OEM rubber that deteriorates when exposed to road salt, oils, and UV radiation, the Hyper-Flex polyurethane formula is chemically resistant and engineered to outlast rubber components by as much as 5 to 1. This set is finished in black for a clean, professional look and provides a significant improvement in chassis feedback and stability.

• Greatly reduces wheel hop during quick acceleration
• Maintains proper alignment for more predictable handling
• Increases overall suspension stability and braking control
• Impervious to undercar chemicals, oils, and atmospheric pollutants
• Proudly Made in the USA
• Manufacturer Part Number: 16.18110G

Fits 1994-2001 Acura Integra GS, GS-R, LS, RS, and Special Edition models. This comprehensive Energy Suspension Hyper-Flex Master Bushing Set replaces soft, high-compliance factory rubber with high-performance polyurethane components designed to restore and improve chassis stability. By upgrading to 16.18105R, you eliminate the excessive deflection common in aging OE bushings, ensuring your Integra maintains proper caster and camber alignment during spirited driving and hard cornering.

Energy's Hyper-Flex polyurethane is engineered to outlast standard rubber 5 to 1. These components are impervious to undercar chemicals like oil and coolant, and they do not deteriorate from UV exposure or road pollutants. This kit significantly reduces wheel hop during quick acceleration and provides more consistent braking control by stabilizing the suspension geometry.

• Maintains precise caster and camber alignment for better handling
• Reduces wheel hop and improves traction during hard acceleration
• Increases overall suspension stability and steering response
• Polyurethane construction resists oil, grease, and atmospheric conditions
• Replaces worn-out factory rubber bushings with durable performance material
• Proudly Made in the USA
• Manufacturer Part Number: 16.18105R

Fits 1992-1995 Honda Civic and 1993-1997 Honda Civic del Sol (All Trims including VTEC).

The Energy Suspension Hyper-Flex Master Bushing Set is a comprehensive polyurethane upgrade designed to replace soft, worn-out factory rubber bushings. By switching to Energy’s proprietary Hyper-Flex polyurethane, you eliminate the deflection common in OEM rubber, ensuring your suspension maintains proper caster and camber alignment under heavy cornering and braking loads.

Engineered for durability, these components are impervious to undercar chemicals like oil and coolant, and they resist deterioration from UV exposure and atmospheric pollutants. This Red Master Set significantly reduces wheel hop during quick acceleration and provides a noticeable increase in overall handling stability and steering response.

• Maintains consistent suspension geometry for better alignment retention
• Drastically reduces wheel hop and improves traction
• High-performance polyurethane resists oils, chemicals, and road grime
• Outlasts traditional rubber bushings 5 to 1
• Proudly Made in America
• Manufacturer Part Number: 16.18103R

Vehicle Fitment

Fits 1992-1995 Honda Civic and 1993-1997 Honda Civic del Sol (all models including VTEC).

The Energy Suspension Hyper-Flex Master Bushing Set is a comprehensive suspension upgrade designed to replace soft, aging factory rubber with high-durometer polyurethane. Unlike OEM rubber that cracks and distorts over time, these Hyper-Flex components are impervious to road salt, oil, coolants, and UV exposure. This ensures your suspension maintains its geometry and alignment even under the heavy loads of performance driving or track use.

Upgrading to this Master Set provides a significant improvement in vehicle control. By minimizing unwanted suspension deflection, these bushings help maintain proper caster and camber alignment, reduce wheel hop during hard acceleration, and stabilize the chassis during aggressive braking and cornering.

• Manufacturer Part Number: 16.18103G
• Material: Performance Polyurethane
• Color: Black
• Fitment: 1992-1997 Honda Civic and del Sol
• Performance Benefits: Improved alignment retention and reduced wheel hop
• Durability: Resistant to oils, chemicals, and atmospheric pollutants
• Origin: Made in the USA

Fits select 1988-2000 Honda Civic, CRX, and Civic del Sol models (Manual Transmission; excluding VTEC models).

Eliminate the spongy feel of a worn shift linkage with Energy Suspension Hyper-Flex manual transmission shifter bushings. Factory rubber bushings degrade over time, leading to excessive play and missed shifts. These performance polyurethane replacements provide a firmer, more direct connection to the gearbox, ensuring crisp and precise gear engagement for both street and track use.

• Manufactured from proprietary Hyper-Flex polyurethane for superior durability over OE rubber
• Maintains proper shift linkage alignment for more consistent gear selection
• Resistant to road oils, salt, and atmospheric contaminants that destroy rubber
• Includes specialized bushings for manual transmission shift linkages
• Finish: Red
• Manufacturer Part Number: 16.1102R

Fits select 1988-2000 Honda Civic, CRX, and Civic del Sol models with manual transmissions.

This Energy Suspension manual transmission mount replaces the soft factory rubber mount with high-performance Hyper-Flex polyurethane to provide superior drivetrain stability. Designed for both street and competition use, it effectively controls engine torque and maintain proper driveshaft angles, preventing premature wear on powertrain components. While rugged enough for racing, the polyurethane material is formulated to remain compliant enough to absorb the vibrations necessary for street drivability.

The 16.1102G mount features a unique safety interlock design and is engineered to resist degradation from under-vehicle fluids, including engine oil, coolants, and road contaminants that typically destroy OE rubber bushings.

• Manufacturer Part Number: 16.1102G
• Material: Energy's Hyper-Flex Performance Polyurethane
• Finish: Black
• Configuration: Manual Transmission
• Includes heavy-duty hardware for a direct-replacement installation
• Maintains proper drivetrain alignment under load
• Resistant to automotive oils and chemicals

Fits select 1992-1997 Honda Civic and Civic del Sol models.

Upgrade your vehicle's handling and response with Energy Suspension Hyper-Flex polyurethane components. Engineered to replace standard rubber bushings that are prone to cracking and distortion, these components provide a dramatic improvement in both performance and long-term durability. By utilizing proprietary polyurethane technology, Energy Suspension ensures more consistent suspension geometry and a more controlled driving experience under demanding conditions.

• Manufactured from proprietary Hyper-Flex polyurethane for maximum longevity
• Designed to outlast and outperform traditional rubber components
• Resistant to vehicle fluids, road salt, and environmental wear
• Improves overall chassis response and alignment stability
• Manufacturer Part Number: 16.10102R

Fits 1969-1978 Volkswagen Beetle and Super Beetle (Air Cooled).

Restore the handling and suspension geometry of your classic Volkswagen with the Energy Suspension Hyper-Flex Rear Spring Plate Bushing Set. Over time, factory rubber bushings become soft, distorted, or cracked, leading to rear-end wander and imprecise alignment. This set provides a direct replacement that maintains proper spring plate orientation under load.

Constructed from proprietary Hyper-Flex polyurethane, these bushings are designed to be much more durable than standard rubber. They resist degradation from road oils, chemicals, and environmental ozone, ensuring a long service life. By providing a firmer mounting point for the spring plates, these components help stabilize the rear suspension during cornering and acceleration for a more controlled driving experience.

• Manufacturer Part Number: 15.2109R
• Material: Hyper-Flex Polyurethane
• Color: Red
• Location: Rear Spring Plate
• Resistant to oils, grease, and atmospheric conditions
• Replaces compliant factory rubber for improved suspension stability

Fits 1954-1968 Volkswagen Beetle Base and Deluxe models with swing axle suspension.

Restore the handling and stability of your classic air-cooled Volkswagen with the Energy Suspension Hyper-Flex Rear Spring Plate Bushing Set. Factory rubber bushings are prone to drying, cracking, and excessive deflection, which compromises suspension geometry and wheel alignment. This set replaces those worn components with proprietary Hyper-Flex polyurethane, providing a firmer, more durable mounting point that allows the rear spring plates to cycle correctly under load.

Engineered for longevity and performance, these bushings are resistant to automotive oils, road salt, and environmental debris that typically cause rubber to fail. By eliminating unwanted movement in the spring plates, this kit helps maintain consistent alignment and improves overall vehicle control.

• Replaces soft or deteriorated factory rubber rear spring plate bushings
• Constructed from proprietary Hyper-Flex polyurethane for maximum durability
• Improves suspension response and maintains proper geometry
• Resistant to chemical degradation and road contaminants
• Designed for 1954-1968 Volkswagen Beetle swing axle applications
• Manufacturer Part Number: 15.2108R

Fits select 2009-2012 Audi A3, TT, TTS and Volkswagen Beetle, CC, Eos, GTI, Jetta, and Tiguan. These Energy Suspension Hyper-Flex™ motor mount inserts are engineered to bridge the gap between soft factory rubber and harsh solid metal mounts. By filling the voids in the original equipment (OE) mount, these inserts significantly reduce engine movement and drivetrain slop without the excessive vibration common with race-only mounts.

The polyurethane construction provides a durable solution that outlasts traditional rubber, which is prone to cracking and tearing under torque. These inserts help stabilize the engine and transmission, leading to more efficient power transfer to the wheels and reduced wheel hop during hard acceleration. They are resistant to common under-vehicle contaminants like oil and coolant, ensuring long-term performance in demanding conditions.

• Manufacturer Part Number: 15.1107G
• Material: Hyper-Flex™ performance polyurethane
• Finish: Black
• Reduces engine deflection and improves throttle response
• Resistant to road contaminants, oils, and coolants
• Includes torque-resistant safety interlock design

Fits 1990-1992 Mazda Miata Base and SE models.

Upgrade your rear suspension with Energy Suspension Hyper-Flex polyurethane bushings. These 12.5mm rear sway bar bushings replace compliant, degradable OE rubber components to allow your sway bar system to operate at peak efficiency. By providing a firmer mounting point, these bushings improve cornering characteristics and reduce body roll without the need for a completely new sway bar.

• Includes 12.5mm rear sway bar bushings and matching end link bushings
• Hyper-Flex polyurethane construction resists road grime, oils, and ozone
• Maintains alignment and improves sway bar effectiveness
• Red finish for a performance-oriented appearance
• Precision-fit replacement for factory rubber bushings
• Manufacturer Part Number: 11.5103R

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, STO).

Energy Suspension Hyper-Flex polyurethane front sway bar bushings (MPN 11.5102R) provide a significant upgrade over factory rubber components. Designed specifically for vehicles equipped with a 19mm front sway bar, these bushings are engineered to resist oil, road salt, and ozone degradation while maintaining their shape under heavy load. By reducing deflection in the sway bar mounts and end links, these bushings help your Miata's suspension maintain its geometry for flatter cornering and more precise steering response.

• Manufactured from durable, high-durometer Hyper-Flex polyurethane
• Specifically sized for 19mm diameter front sway bars
• Includes front sway bar frame bushings and end link bushings
• Red finish
• Replaces soft or degraded OE rubber bushings
• Manufacturer Part Number: 11.5102R

Fits 1979-1985 Mazda RX-7 GS, GSL, GSL-SE, S, and Limited Edition.

Energy Suspension Hyper-Flex polyurethane front sway bar bushings are engineered to replace compliant factory rubber units that soften and distort over time. These 23mm bushings provide a more rigid and stable mounting point, allowing the sway bar to react immediately to cornering forces. This upgrade effectively improves roll resistance and steering response, making your chassis feel more precise without the maintenance requirements of traditional metal bearings.

• Replaces worn OEM rubber bushings to restore and improve handling performance
• Manufactured from proprietary Hyper-Flex polyurethane for superior durability
• Resistant to automotive fluids, road salt, and environmental degradation
• Precision-fit for 23mm diameter front sway bars
• Includes manufacturer part number 11.5101G

Fits 2004-2007 Mazda RX-8 Base and Shinka models.

Upgrade your suspension's precision with Energy Suspension Hyper-Flex polyurethane rear lateral and trailing arm bushings. These components replace high-compliance factory rubber bushings that are prone to deflection and degradation. By switching to a firmer polyurethane compound, you maintain critical alignment settings during hard cornering and extreme driving conditions on the street or track.

The full-floating, non-binding design ensures the suspension arms move through their travel smoothly without the stiction often found in worn rubber parts. Engineered for durability, the Hyper-Flex material is resistant to road contaminants and automotive fluids, outlasting standard OE replacements while significantly sharpening handling response.

• Maintains precise rear-end alignment under heavy loads
• Improves cornering stability and overall vehicle control
• Full-floating design for smooth, efficient suspension operation
• Manufactured from Energy Suspension’s proprietary Hyper-Flex polyurethane
• Direct fit into existing stock control arms
• Manufacturer Part Number: 11.3108G
• Color: Black

Fits 1990-2005 Mazda Miata models (NA and NB chassis). This Energy Suspension Hyper-Flex front control arm bushing set is engineered to replace soft, compliant factory rubber with high-performance polyurethane, delivering sharper steering response and more consistent suspension geometry.

By resisting the deflection common in aged OE components, these bushings maintain proper alignment under extreme cornering loads on both the street and the track. The full-floating, non-binding design ensures smooth suspension articulation for more efficient operation and improved driver feedback.

• Hyper-Flex performance polyurethane outlasts and outperforms traditional rubber
• Maintains precise alignment during aggressive driving, cornering, and braking
• Full-floating design prevents binding for smoother suspension movement
• Resists degradation from oils, road salt, and environmental contaminants
• Black finish for a clean, professional appearance
• Manufacturer Part Number: 11.3105G

Fits 1979-1985 Mazda RX-7 models including GS, GSL, GSL-SE, Limited Edition, and S.

Restore handling precision and eliminate suspension slop with the Energy Suspension Hyper-Flex Rear Control Arm Bushing Set. These bushings are engineered to replace soft, worn factory rubber that deflects under load, which often leads to poor alignment and unpredictable cornering. By utilizing Energy Suspension's proprietary Hyper-Flex polyurethane, these components provide the rigidity necessary for high-performance driving while remaining durable enough for daily street use.

The 11.3104G set features a full-floating, non-binding design that ensures smooth suspension articulation without the friction associated with standard rubber bushings. These polyurethane components are highly resistant to under-car contaminants such as oil, road salt, and ozone, ensuring they outlast and outperform OE replacements.

• Manufacturer Part Number: 11.3104G
• Material: Hyper-Flex Performance Polyurethane
• Finish: Black
• Maintains proper alignment under extreme cornering and braking
• Full-floating design prevents binding for more efficient operation
• Direct fit for remaining stock control arms
• Resistant to automotive fluids and road debris

Fits 1986-1995 Suzuki Samurai models including Base, JA, JL, JS, JX, and JX SE.

Over time, factory rubber body mounts become soft, distorted, and prone to cracking or crushing. This degradation leads to body-to-frame misalignment and a compromised ride. The Energy Suspension Hyper-Flex body mount set replaces worn OE components with high-performance polyurethane bushings designed to restore factory ride height and maintain proper chassis alignment.

Energy's proprietary Hyper-Flex™ polyurethane formulation offers the ideal balance of durability and comfort. Unlike harsh aluminum mounts that can transmit excessive vibration or cause component fatigue, these polyurethane mounts are rugged enough for demanding off-road use while remaining compliant enough for daily street driving. This set features molded-in zinc-plated steel rings for maximum strength and structural integrity where the application requires it.

• Replaces distorted, worn-out original rubber mounts
• Restores proper body and cab-to-bed alignment
• Manufactured from proprietary Hyper-Flex™ polyurethane
• Includes zinc-plated steel reinforcement rings for added durability
• Resistant to road oils, chemicals, and ozone degradation
• Manufacturer Part Number: 1.4101G

The Energy Suspension 9.9489G Universal Link is a high-performance flange-type bushing engineered for versatility across motorsports and various custom fabrication projects. Molded from the brand's signature Hyper-Flex polyurethane formula, this bushing is designed to withstand the rigors of heavy-duty use while resisting chemicals, oils, and environmental breakdown that often compromise traditional rubber components.

As a universal component, it provides a reliable solution for custom suspension links, mechanical pivots, or industrial applications requiring a durable flanged interface. This part is intended for builders who need a high-quality isolator to fit specific bore and fastener requirements.

• Brand: Energy Suspension
• MPN: 9.9489G
• Material: Hyper-Flex Polyurethane
• Bushing Style: Flange Type
• Color: Black
• Included: Bushing only (Outer tube and fastener not included)

This Energy Suspension 9.9488G universal flange-type bushing is engineered for versatility across a wide range of automotive and custom motorsports applications. Molded from Energy Suspension's proprietary Hyper-Flex polyurethane formula, this bushing provides significantly higher durability and resistance to oils, chemicals, and road grime compared to standard rubber components.

The Hyper-Flex material ensures consistent geometry and reduces deflection, making it an ideal choice for custom link fabrication or specialized mounting solutions where precision is required. Because this is a universal component, it allows builders and technicians to integrate high-performance polyurethane into projects where vehicle-specific kits may not exist.

• Manufactured from signature Hyper-Flex polyurethane formula
• Superior resistance to performance-degrading road contaminants
• Durable black finish for a clean, OE-style appearance
• Engineered for custom fabrication and multi-industry use
• Part Number: 9.9488G

Note: Outer tube and fastener hardware are not included with this component.

Designed for custom fabrication and specialized repair applications, the Energy Suspension 9.9485G flange-type universal bushing provides a durable, high-performance alternative to traditional rubber. This component is molded from the proprietary Hyper-Flex Formula polyurethane, which is engineered to resist degradation from oils, road chemicals, and ozone while maintaining precise alignment under load.

• Material: Hyper-Flex Formula polyurethane for superior durability and performance.
• Configuration: Flange-type bushing suitable for universal link applications.
• Resistance: High resistance to environmental contaminants and mechanical wear.
• Part Number: 9.9485G
• Color: Black

Please Note: This is a universal component. The outer tube and fasteners are not included and must be sourced separately to complete your specific installation.