The Fox Racing Shox 2.5 Spanner Wrench (803-00-733) is a specialized tool engineered for precision maintenance of coilovers with 2.5-inch diameter shock bodies. This "backup" style wrench provides the necessary leverage and engagement to adjust spring preload and ride height, particularly on dual-nut configurations where holding one ring while loosening the other is required.

• Designed specifically for Fox 2.5 Series shock bodies
• Essential for accurate spring preload and ride height adjustments
• Constructed from high-strength material to prevent bending or slipping under load
• Protects aluminum shock nuts from marring or rounding compared to generic tools
• Manufacturer Part Number: 803-00-733

Maintain the structural integrity of your suspension assembly with this genuine Fox Racing Shox spring retainer clip. This critical hardware component ensures the coil spring remains properly seated and aligned on the shock body, preventing unwanted movement or component wear during high-travel suspension cycles.

Manufactured from high-strength steel with a corrosion-resistant zinc finish, this clip is designed to withstand the harsh environments typical of off-road and performance driving. Whether you are performing a routine shock rebuild or swapping spring rates, using fresh hardware ensures a reliable interface between the spring and the preload collar or retainer.

• Outer Diameter (OD): 3.100 in
• Thickness (THK): .100 in
• Total Length (TLG): .375 in
• Material: Steel
• Finish: Zinc Plated
• Manufacturer Part Number: 234-00-406

Restore the smooth stroke and sealing integrity of your Fox shocks with this genuine Fox replacement chrome shaft. Engineered to the same exacting tolerances as the original component, this shaft is essential for rebuilding a damper that has suffered from pitting, bending, or surface scoring that can compromise seal life and damping consistency.

This shaft features a hard chrome finish, providing a low-friction surface that extends the life of internal seals while resisting corrosion from road debris and harsh environments. It is a direct-fit replacement component designed for specific Fox shock configurations requiring a hex-end shaft.

• Manufacturer Part Number: 229-19-090
• Outside Diameter: 0.875 in
• Total Length (TLG): 14.705 in
• Shoulder Length (SHLG): 1.411 in
• Threading: M12 x 1.75mm
• Special Features: Integrated hex on one end for secure installation
• Material: Hardened steel with a polished chrome finish

This genuine Fox Factory replacement shock shaft is engineered to restore the damping performance and sealing integrity of your suspension system. Precision-ground from high-strength steel and finished with a durable hard chrome coating, this shaft provides a low-friction surface that maximizes seal life and prevents fluid bypass.

Designed as a direct replacement for worn, pitted, or bent shafts, this component ensures your damper returns to its original factory tolerances. The 0.875-inch diameter and specific shoulder length provide the necessary strength for demanding off-road or performance applications.

• Manufacturer Part Number: 229-19-089
• Outer Diameter (OD): 0.875"
• Total Length (TLG): 16.038"
• Shoulder Length (SHLG): 1.350"
• Finish: Hard Chrome

This genuine FOX spherical eyelet reducer allows you to adapt a shock's spherical bearing eyelet to specific chassis mounting requirements. Precision-machined from high-grade stainless steel, this reducer provides the necessary spacing and bore reduction to ensure a secure, rattle-free installation while resisting corrosion in harsh underbody environments.

• Reduces spherical eyelet bore to 14mm hardware
• Provides a total mounting width of 1.935 inches
• Integrated O-ring seal helps keep debris out of the bearing assembly
• Durable stainless steel construction prevents rust and material deformation
• Manufacturer Part Number: 214-39-193-3

This FOX Spherical Eyelet Reducer is engineered to provide a precision fit for shocks equipped with spherical bearing ends. It adapts the eyelet to a 14mm bolt diameter while establishing a precise 1.155-inch mounting width, ensuring your suspension hardware is properly torqued and centered within the vehicle mounts.

Constructed from high-grade stainless steel, this reducer is built to withstand the high axial and radial loads typical of off-road and performance applications while offering excellent corrosion resistance. The integrated O-ring seal provides a critical barrier against dirt, moisture, and grit, protecting the spherical bearing from premature wear and ensuring smooth articulation throughout the shock's travel.

• Manufacturer Part Number: 214-39-115-3
• Mounting Width: 1.155in
• Bolt Diameter: 14mm
• Material: Stainless Steel
• Seal Type: Integrated O-Ring
• Compatibility: Designed for FOX shocks with spherical bearing eyelets

This Fox (T) stainless steel spherical reducer is designed for precision suspension articulation, providing a durable interface for spherical bearings. Engineered from high-grade stainless steel to resist corrosion and wear, this reducer features an integrated O-ring seal to protect the pivot point from contaminants, ensuring consistent performance in demanding off-road conditions.

• Material: Stainless Steel
• Inner Diameter (ID): 0.750 in
• Spherical Diameter: 1.230 in
• Outer Diameter (OD): 1.546 in
• Bore Size: 14mm
• Seal Type: Integrated O-Ring
• Manufacturer Part Number: 214-16-000

This genuine Fox Shocks replacement bar pin is engineered specifically for 1998-current Ford Ranger applications. It serves as the dedicated mounting hardware for Fox shock model 980-24-648, ensuring a precise and secure connection between the shock absorber and the vehicle's factory mounting points.

Designed to handle the high-stress loads of off-road environments, this bar pin replaces worn, bent, or corroded hardware to restore proper suspension geometry and eliminate mounting play. It is manufactured to meet Fox's strict tolerances for durability and fitment.

• Direct replacement for Fox MPN: 213-82-002
• Specifically compatible with Fox shock model 980-24-648
• Fits 1998-present Ford Ranger models
• High-strength construction for reliable suspension performance
• Ensures proper articulation and mounting security

Maintain the performance and mounting security of your suspension system with this genuine Fox Hourglass Eyelet Replacement Bushing. Designed to replace worn or damaged eyelet components, this bushing restores the precise fitment required for proper shock articulation and eliminates unwanted play in the mounting points.

This eyelet is manufactured to exact tolerances and features a Type II black anodized finish for superior corrosion resistance and surface hardness. It is a critical component for shock service and custom mounting applications where a 5/8-18 UNF thread pitch is required.

• Manufacturer Part Number: 213-78-200
• Eyelet Style: Hourglass
• Bore Diameter: 1.010 in.
• Bushing Width: 0.950 in.
• Thread Size: 5/8-18 UNF
• Dimension: 1.300 in.
• Finish: Black Anodized Type II

This replacement shock sleeve is engineered to restore precision and structural integrity to your vehicle's suspension mounting points. Manufactured from high-strength 1020 steel, it provides the necessary rigidity to handle the constant cycling and load-bearing demands of a performance shock absorber. The clear zinc finish adds a critical layer of corrosion protection, ensuring the sleeve does not seize or degrade in exposed undercar environments.

• Part Number: 213-28-001-B
• Outer Diameter (OD): 0.75 in
• Overall Length (LTG): 1.675 in
• Material: 1020 Steel
• Finish: Clear Zinc Plating

Whether you are rebuilding a worn bushing assembly or replacing damaged hardware, this sleeve provides a precise fit to eliminate play and ensure smooth suspension articulation.

This Fox suspension mounting sleeve is engineered for high-performance applications where precision and durability are critical. Machined from 1020 steel, it serves as a robust interface between your mounting hardware and shock eyelet bushings, preventing play and ensuring proper alignment within the suspension system.

The clear zinc plating provides essential protection against oxidation and environmental debris, extending the service life of your mounting hardware. This sleeve is a precision component designed to meet the exact tolerances required for Fox shock assemblies.

• Manufacturer Part Number: 213-28-000-B
• Material: 1020 Steel
• Finish: Clear Zinc
• Inner Diameter (ID): 0.560 in
• Outer Diameter (OD): 0.750 in
• Total Length (TLG): 1.625 in

Restore the precision and reliability of your suspension mounting points with this genuine Fox replacement sleeve. Designed to provide a rigid bearing surface within shock eyelets or mounting hardware, this sleeve ensures proper bolt tension and smooth articulation during suspension cycles. It replaces worn or damaged sleeves that can lead to unwanted noise, play, or uneven bushing wear.

• Manufacturer Part Number: 213-27-002-B
• Inner Diameter (ID): .506in
• Outer Diameter (OD): .625in
• Total Length (TLG): 1.480in
• Material: High-strength steel
• Finish: Clear Zinc plating for superior corrosion resistance and durability

This component is essential for maintaining the tight tolerances required by Fox performance shocks, ensuring your hardware remains centered and secured under heavy off-road or track loads.

Maintain precise suspension geometry and eliminate mounting play with this genuine Fox Racing Shox replacement shock sleeve. Designed to fit within the shock eyelet bushing, this sleeve provides a durable, smooth-bore interface for the mounting bolt, ensuring the shock absorber remains securely anchored under heavy loads.

• Manufacturer Part Number: 213-27-000-B
• Outer Diameter: 5/8 inch (0.625")
• Total Length (TLG): 1.500 inches
• Bolt Compatibility: 12mm
• Replaces worn or corroded factory sleeves to restore suspension performance and quiet operation

Maintain the integrity of your high-performance suspension with this genuine FOX Factory replacement O-ring seal. Engineered specifically for static sealing applications, this -315 dash size O-ring provides a precise, leak-free fit within the tight tolerances of FOX shock assemblies.

• Manufacturer Part Number: 029-03-315
• Dash Size: -315
• Cross Section (C.S.): 0.210"
• Inner Diameter (ID): 0.787"
• Material Grade: N-70 (Nitrile 70 Durometer)
• Application Type: Static Seal

Using authentic FOX seals during a rebuild ensures material compatibility with suspension fluids and preserves the service life of your components.

This genuine Fox Factory replacement O-ring (MPN: 029-03-312-A) is a precision-engineered static seal designed for suspension service and maintenance. Manufactured from a standard N-70 Nitrile (Buna-N) compound, it offers a 70 Shore A durometer rating for dependable sealing in various hydraulic applications within a shock or fork assembly.

As a dash size -312 component, this O-ring ensures exact tolerances to prevent fluid or air leaks. Utilizing genuine Fox seals during rebuilds ensures compatibility with suspension oils and maintains the factory-specified performance of your hardware.

• Manufacturer Part Number: 029-03-312-A
• Dash Size: -312
• Cross Section (C.S.): 0.210 in
• Inner Diameter (I.D.): 0.600 in
• Material: N-70 Nitrile (70 Durometer)
• Seal Type: Static

This genuine Fox Shox replacement O-ring is engineered for dynamic sealing applications within high-performance suspension components. Manufactured from N674-70 standard Nitrile, this seal is designed to withstand the friction and pressure fluctuations inherent in shock absorber operation, ensuring consistent performance and preventing fluid leaks.

• Manufacturer Part Number: 029-00-321
• Dash Size: -321
• Cross Section (C.S.): 0.210 in
• Inner Diameter (I.D.): 1.162 in
• Material: N674-70 Nitrile
• Application Type: Dynamic Seal

This Fox replacement hose (MPN: 023-05-037-A) is engineered for high-performance off-road suspension systems, specifically for shock reservoir and bypass applications. Measuring 12.00 inches in total length (TLG), it features 7/16-20 O-Ring Boss (ORB) fittings on both ends to ensure a high-pressure, leak-free seal under demanding conditions.

• Manufacturer Part Number: 023-05-037-A
• Total Length: 12.00 inches
• Fitting A: 7/16-20 O-Ring Boss (ORB)
• Fitting B: 7/16-20 O-Ring Boss (ORB)
• Application: Off-road use only
• Compatibility: Direct replacement for select Fox Racing Shox components

Maintain precise shock mounting and suspension performance with this Fox Factory replacement stem bushing. Manufactured from high-durometer black polyurethane, this bushing is designed to replace worn or degraded original equipment components, offering superior resistance to oils, road salt, and environmental factors compared to standard rubber.

This component provides a stable, resilient interface for the shock absorber stem, ensuring consistent damping performance and reducing unwanted movement or noise at the mounting point. It is engineered to meet the exact tolerances required for Fox suspension systems.

• Material: High-grade Black Polyurethane
• Outer Diameter (OD): 1.650 in.
• Inner Diameter (ID): 0.500 in.
• Thickness/Length (Tlg): 0.710 in.
• Part Number: 014-16-002

Restore the precision and dampening performance of your shock absorbers with the Fox Polyurethane Hourglass Replacement Bushing. Engineered as a high-durability alternative to standard rubber, this polyurethane component is designed to resist environmental degradation and compression set, ensuring a longer service life in demanding off-road conditions.

The hourglass profile allows for necessary articulation within the shock eyelet, reducing bind and maintaining firm suspension alignment. This is a critical service part for replacing worn, cracked, or missing bushings that cause clunking or inconsistent handling.

• Manufacturer Part Number: 014-11-020
• Material: High-density Polyurethane
• Inner Diameter (ID): 0.75 inch
• Total Length (TLG): 1.460 inches
• Profile: Hourglass

Fits 2010-2014 Ford Raptor models.

Maintain the integrity of your front suspension with this genuine Fox Front Lower Replacement Shock Eyelet Bushing. Over time, the high-stress environment of off-road driving causes eyelet bushings to degrade, leading to excessive play, audible clunking, and poor shock alignment. This replacement component is engineered to restore the precise fitment and damping performance required for the SVT Raptor platform.

• Direct replacement for the front lower shock eyelet bushing
• Restores factory suspension tolerances and helps eliminate unwanted noise
• Specifically designed for 2010-2014 Ford Raptor shock absorbers
• Heavy-duty construction for off-road durability
• Manufacturer Part Number: 014-11-008

Restore precision and eliminate suspension play with this Fox Polyurethane Hourglass Replacement Bushing. Designed specifically for shock absorber eyelets, this high-density polyurethane component replaces worn or degraded rubber bushings, offering significantly better resistance to compression set, road oils, and environmental debris.

The hourglass profile allows for the necessary articulation required during suspension cycling while maintaining a secure, centered fit within the mounting hardware. This is a direct replacement part for Fox shock assemblies requiring a 5/8-inch internal diameter and a 1.500-inch total length.

• Material: High-durability Polyurethane
• Inner Diameter (ID): 5/8 inch
• Total Length (TLG): 1.500 inches
• Profile: Hourglass
• Manufacturer Part Number: 014-11-004-A

Restore the performance and stability of your suspension with this Fox Polyurethane Hourglass Eyelet Replacement Bushing. Designed specifically for shock eyelet applications, this component replaces worn or deteriorated original bushings to eliminate unwanted play, vibration, and noise in your shock mounts.

Constructed from high-grade polyurethane, this bushing is engineered for superior resistance to oils, road chemicals, and compression compared to standard rubber. The hourglass profile is critical for maintaining proper articulation during suspension travel, ensuring the shock can pivot without binding. This is a direct replacement part for maintaining Fox racing shocks and performance series dampers.

• Manufacturer Part Number: 014-11-003-A
• Material: High-durometer Polyurethane
• Inner Diameter: 0.625 inches
• Total Length (TLG): 1.300 inches
• Profile: Hourglass eyelet for optimized pivot geometry
• Resistant to deformation and environmental degradation

This Fox replacement eyelet hourglass bushing is engineered to restore mounting stability and vibration isolation for high-performance shock absorbers. Molded from high-durability 85A durometer polyurethane, this bushing provides significantly more resistance to compression set and environmental fatigue than standard rubber components.

This component is designed to press into the shock eyelet, ensuring the mounting sleeve remains centered and secure during aggressive suspension cycling. Replacing worn bushings with this polyurethane unit eliminates excess play and noise while maintaining precise suspension geometry.

• Manufacturer Part Number: 014-11-002-A
• Material: Polyurethane
• Hardness: 85A Durometer
• Inner Diameter (ID): 0.750 in
• Total Length (TLG): 1.300 in

This genuine Fox spherical bearing is engineered for high-performance suspension systems and shock absorber mounts. Designed to handle extreme loads while providing smooth, multi-axis articulation, this precision component replaces worn bearings to restore steering feel and suspension geometry.

• Manufacturer Part Number: 001-00-023
• Bore Diameter: 0.750in
• Component Type: Spherical Bearing
• Application: Suitable for shock absorbers, suspension pivots, and race-spec linkages
• Construction: Built to precise tolerances for reduced friction and extended service life

This genuine Fox Spherical Bearing (MPN: 001-00-006-A) is precision-engineered for high-performance suspension systems where durability and smooth articulation are required. Featuring a 0.625-inch bore, this bearing is a critical component for restoring the integrity of shock eyes and suspension pivot points.

Constructed to withstand heavy loads and harsh environments, this spherical bearing (often referred to as a uniball) replaces worn factory bushings to eliminate unwanted deflection and binding. By allowing for consistent multi-axis rotation, it ensures your suspension geometry remains stable and responsive through its full range of travel.

• Manufacturer: Fox
• Part Number: 001-00-006-A
• Bore Diameter: 0.625in
• Type: Spherical Bearing / Uniball
• Optimized for shock absorber eyes and linkage pivot points