H&R specialty wheel bolts are precision-engineered for critical fastening applications. This extended 55mm bolt (MPN 1255502) is designed for vehicles requiring additional shank length, typically when installing wheel spacers or replacing worn factory hardware. Manufactured in Germany to exacting tolerances, these bolts ensure proper thread engagement and seat contact for secure wheel fitment.

• Thread Size: 12 x 1.5mm
• Shank Length: 55mm
• Seat Type: Mercedes Ball Head
• Wrench Size: 17mm Hex
• Manufacturing: Made in Germany
• Part Number: 1255502

H&R specialty wheel studs provide a reliable, high-strength solution for securing wheels to your vehicle's hub. These studs are engineered for precision and durability, making them an ideal choice for replacing worn factory hardware or providing the necessary extended length for wheel spacer installations. Manufactured in Germany, every stud is built to withstand the stresses of daily driving and performance use.

This press-in wheel stud features an M12 x 1.5 thread pitch and a 50mm overall length. The 14.20mm knurl diameter ensures a proper interference fit within the hub assembly to prevent the stud from spinning during torque application.

• Thread Pitch: M12 x 1.5
• Total Length: 50mm
• Knurl Diameter: 14.20mm
• Installation Type: Press-in
• Origin: Made in Germany
• Part Number: 1255044

H&R precision-engineered wheel bolts are designed as high-quality replacements for factory hardware or as extended-length solutions for vehicles equipped with wheel spacers. Manufactured in Germany to rigorous standards, these bolts provide the strength and durability required for critical suspension components.

• Thread Pitch: M12 x 1.5
• Shank Length: 50mm
• Seat Type: Mercedes-style Ball Seat
• Wrench Size: 17mm Hex
• Construction: High-tensile strength material, Made in Germany
• Manufacturer Part Number: 1255002

Whether you are replacing worn-out OE bolts or calculating the necessary length for a wide stance, these H&R fasteners ensure proper thread engagement and a secure interface between the wheel and hub. Always verify your wheel's seat type (ball vs. cone) and required shank length before installation.

Secure your wheel assembly with this H&R M12 x 1.5 wheel stud replacement. Engineered for precision and reliability, these studs are designed to meet or exceed OE hardware standards, making them an ideal choice for replacing worn factory studs or providing the necessary thread engagement for use with wheel spacers. Each stud is manufactured in Germany from high-tensile materials to ensure maximum strength and durability under load.

• Thread Size: M12 x 1.5
• Shank Length: 45mm
• Application: Replacement or extended stud for spacer installations
• Materials: High-quality steel construction
• Country of Origin: Germany
• Manufacturer Part Number: 1254544

Proper wheel fastening is critical for safety; always ensure you have the correct thread pitch and shank length for your specific hub and wheel combination before installation. These studs are available to support various seat types and custom configurations.

Secure your wheels with precision-engineered H&R Wheel Bolts, manufactured in Germany to the highest standards for safety and durability. This M12x1.5 bolt features a 45mm extended shank, making it an ideal solution for vehicles running wheel spacers or as a high-strength replacement for factory hardware. Designed specifically for Volkswagen and Audi applications requiring a ball seat (radius) interface, these bolts provide consistent torque retention and reliable performance.

• Thread Pitch: M12 x 1.5
• Shank Length: 45mm
• Seat Type: Ball Seat
• Hex Head Size: 17mm
• High-tensile strength construction for maximum safety
• Corrosion-resistant finish for longevity
• Made in Germany
• Manufacturer Part Number: 1254503

This H&R wheel bolt (MPN 1254502) provides the necessary extended length for vehicles utilizing wheel spacers or requiring high-strength replacement hardware. Engineered with a precision 12 x 1.5mm thread pitch and a specific Mercedes-style ball seat, this bolt ensures proper torque distribution and a secure seat between the wheel and hub assembly.

• Thread Diameter and Pitch: 12 x 1.5mm
• Shank Length: 45mm
• Seat Design: Mercedes-specific Ball Seat
• Drive Type: 17mm Hex
• Purpose: Optimized for wheel spacer applications or OE hardware replacement
• Origin: Manufactured in Germany to rigorous quality standards
• Part Number: 1254502

Precision-machined for durability and corrosion resistance, these bolts are essential for maintaining wheel safety and performance when changing offset or track width.

Secure your wheels with precision-engineered H&R wheel bolts (MPN 1254501). These high-quality fasteners are manufactured in Germany to meet rigorous standards, ensuring reliable torque retention and strength for both street and performance applications. Featuring a 45mm shank length, these bolts are ideal for use with wheel spacers or aftermarket wheel setups that require extended thread engagement over factory hardware.

Designed with a 17mm hex head for standard tool compatibility, the tapered seat ensures proper centering and even load distribution across the wheel bore. Whether you are replacing corroded OE bolts or finalizing a wider stance with spacers, H&R hardware provides the exact fitment and material integrity needed for critical drivetrain components.

• Thread Pitch: 12 x 1.5
• Shank Length: 45mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Zinc Plated for corrosion resistance
• Country of Origin: Germany
• Manufacturer Part Number: 1254501

H&R wheel bolts are engineered for precision and durability, providing a reliable fastening solution for your vehicle's wheel assembly. Manufactured in Germany, these high-strength fasteners (MPN 1254301SW) feature a 43mm shank length, making them an ideal choice for applications using wheel spacers or as extended replacements for factory hardware to ensure proper thread engagement.

This specific bolt features a tapered (conical) seat and a 17mm hex head, finished in a durable black coating to resist corrosion and maintain a clean aesthetic. Whether you are fine-tuning wheel fitment or replacing worn fasteners, H&R components meet strict quality standards for torque retention and safety.

• Thread Pitch: 12 x 1.5
• Shank Length: 43mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturer Part Number: 1254301SW
• Origin: Made in Germany

H&R wheel bolts provide a precision fastening solution for high-performance wheel fitment. Manufactured in Germany to rigorous standards, these bolts are suitable as high-tensile OE replacements or as extended hardware for use with wheel spacers. This specific bolt features a 12x1.5 thread pitch with a 40mm shank length, designed for applications where additional thread engagement is required over factory lengths.

• Thread Pitch: 12 x 1.5mm
• Shank Length: 40mm
• Seat Type: Mercedes Ball Seat
• Hex Size: 17mm
• Application: Replacement hardware or extended length for wheel spacers
• Origin: Made in Germany
• Manufacturer Part Number: 1254002

Always verify the required seat type (ball vs. cone) and shank length for your specific wheels and spacers before installation to ensure safe thread engagement.

H&R wheel bolts are precision-engineered fasteners designed for secure wheel fitment. These M12x1.5 bolts feature a 40mm shank length, making them an ideal choice for use with wheel spacers or as high-strength replacements for original equipment. Manufactured in Germany to exacting standards, H&R hardware ensures consistent torque and reliable thread engagement for demanding automotive applications.

• Thread Pitch: M12x1.5
• Shank Length: 40mm
• Seat Type: Tapered (Cone Seat)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1254001SW

Secure your wheels with precision-engineered H&R wheel bolts. These M12 x 1.5 threaded fasteners feature a 40mm shaft length, making them an ideal solution for vehicles utilizing wheel spacers or as a high-strength replacement for factory hardware. Manufactured in Germany to exacting tolerances, these bolts ensure proper torque retention and accurate wheel centering for safety and performance.

• Thread Specification: M12 x 1.5
• Shaft Length: 40mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Application: Extended length for wheel spacers or OE replacement
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1254001

H&R wheel bolts provide a high-strength solution for securing your wheels, whether you are using them as high-quality OE replacements or as extended-length hardware for wheel spacers. These fasteners are engineered and manufactured in Germany to exacting standards, ensuring proper thread engagement and torque retention.

This specific wheel bolt features a black finish for a clean, understated look and a tapered seat to match many aftermarket wheel profiles. When installing wheel spacers, ensure your bolt length is increased by the exact width of the spacer to maintain safe thread engagement.

• Thread Pitch: M12 x 1.5
• Shank Length: 38mm
• Seat Type: Tapered / Conical
• Head Size: 17mm Hex
• Finish: Black
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1253801SW

These H&R specialty wheel bolts are engineered for precision and durability, serving as high-quality OE replacements or extended hardware for use with wheel spacers. Manufactured in Germany, each bolt is designed to meet strict automotive tolerances, ensuring a secure fitment between your wheel and hub assembly.

• Thread Pitch: M12 x 1.5
• Shank Length: 35mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturer Part Number: 1253501SW
• Origin: Made in Germany

Whether you are fine-tuning vehicle stance with wheel spacers or replacing worn factory hardware, H&R wheel bolts provide the material strength and corrosion-resistant finish required for both street and track applications.

H&R specialty wheel bolts are engineered for high-strength wheel fastening, whether you are replacing worn factory hardware or upgrading to wheel spacers that require extended thread engagement. Manufactured in Germany to rigorous standards, these bolts provide the precise clamping force and durability required for performance automotive applications.

These M12x1.5 bolts feature a 35mm shaft length and a tapered (conical) seat design. They are a reliable solution for ensuring proper fitment when factory bolts are too short or when using aftermarket wheels designed for tapered seats.

• Thread Pitch: 12 x 1.5
• Shaft Length: 35mm
• Seat Type: Tapered (Conical)
• Hex Head Size: 17mm
• Origin: Made in Germany
• Manufacturer Part Number: 1253501

H&R specialty wheel bolts are engineered for precision fitment and maximum security. This black 12x1.5 thread bolt features a 30mm underhead length, making it suitable as a high-quality OE replacement or for use with specific wheel spacer applications where extended reach is required.

• Thread: 12 x 1.5
• Shank Length: 30mm
• Seat Type: Tapered (60 Degree Conical)
• Head Size: 17mm Hex
• Finish: Black
• Country of Origin: Germany
• Manufacturer Part Number: 1253001SW

Each fastener is manufactured to exacting standards in Germany to ensure consistent torque and durability. These bolts are a critical component for maintaining proper wheel-to-hub engagement and safety.

H&R Special Wheel Bolts are precision-engineered in Germany to provide a secure, high-strength connection between your wheels and hubs. This M12x1.5 bolt features a 28mm shank length and a specialized Mercedes-style ball seat, making it an ideal choice for restoring factory fitment or accommodating thin wheel spacers. Each bolt is manufactured to exacting tolerances to ensure consistent torque and reliable performance under load.

• Thread Pitch: M12 x 1.5
• Shank Length: 28mm
• Seat Type: Mercedes Ball Seat
• Hex Head: 17mm
• Application: Ideal for OE replacement or for use with wheel spacers
• Construction: High-strength fastening steel for maximum durability
• Country of Origin: Made in Germany
• Manufacturer Part Number: 1252802

H&R wheel bolts are precision-engineered components designed for use as high-quality OE replacements or as extended hardware for wheel spacer installations. Manufactured in Germany to exacting tolerances, these bolts ensure secure wheel-to-hub mating and reliable thread engagement.

This individual wheel bolt features a tapered (conical) seat, making it compatible with many aftermarket wheel designs and select factory applications. Whether you are correcting a mismatched set or upgrading your vehicle's stance, H&R fasteners provide the durability required for both street and track performance.

• Thread Pitch: M12 x 1.5
• Shank Length: 28mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Manufacturing Location: Germany
• Manufacturer Part Number: 1252801

H&R Wheel Studs provide a precision-engineered solution for vehicles requiring extended hardware for wheel spacers or high-strength OE replacements. Manufactured in Germany from high-tensile alloy steel, these studs are designed to withstand the shear and clamping forces required for secure wheel fitment. Whether you are performing a stud conversion or accommodating thicker wheel hubs, H&R hardware ensures proper thread engagement and a secure seat.

• Thread Pitch: M12 x 1.25
• Total Length: 45mm
• Knurl Diameter: 14.25mm
• Material: High-strength alloy steel
• Finish: Durable corrosion-resistant coating
• Use Case: Ideal for use with wheel spacers or as heavy-duty OE replacements
• Origin: Made in Germany
• Part Number: 12254524

Fits select 2010-2020 Porsche 911, 718 Boxster, 718 Cayman, Boxster, and Panamera models.

H&R Trak+ DR Series Wheel Spacers improve your vehicle's stance and handling by widening the track width. These 5mm spacers move the wheel out to be flush with the fender, eliminating the recessed look of factory wheels. Engineered with a hubcentric design, they feature a full-contact hub to ensure even load distribution and lateral support, maintaining the smooth ride quality of your OE setup.

Unlike standard 6061-T6 billet aluminum spacers, Trak+ spacers are manufactured from a proprietary lightweight alloy with a significantly higher tensile strength. These DR Series spacers are designed to be sandwiched between the wheel and the hub and require longer wheel bolts for installation (sold separately).

• Thickness: 5mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Type: 14x1.5
• Finish: Black
• Material: High-tensile proprietary aluminum/magnesium alloy
• Manufacturing: Made in Germany
• Manufacturer Part Number: 10957161SW

Fits select 2010-2020 Porsche 911, Panamera, Boxster, and 718 Boxster/Cayman models. See the fitment table below for full compatibility.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track for improved handling and a flush, aggressive stance. These 5mm spacers are engineered to fit between the wheel and the hub, requiring longer wheel bolts (sold separately) for a secure installation. By moving the wheels out to the fender line, they provide increased lateral support and a custom look without compromising ride quality.

Unlike generic spacers, Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet. They are hubcentric and feature a full-contact hub—matching the factory Porsche hub design—to ensure even load distribution and eliminate vibration at high speeds.

• Width: 5mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Type: 14x1.5
• Series: DR Series
• Construction: Proprietary high-tensile strength alloy
• Finish: Hubcentric for precise fitment
• Origin: Made in Germany
• MPN: 10957161

Fits select 1997-2014 BMW 5 Series, X5, and X6 models. These H&R Trak+ DR Series 5mm wheel spacers are engineered to move your wheels outward for a flush fender fitment, instantly improving your vehicle's stance and lateral stability. By widening the track, these spacers enhance handling characteristics and provide a more aggressive aesthetic.

Constructed in Germany from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum while remaining lightweight. The hubcentric design features a full-contact hub to ensure even load distribution and lateral support, maintaining the smooth ride quality of the factory setup. Please note that DR Series spacers require extended-length wheel bolts for proper installation.

• Thickness: 5mm
• Bolt Pattern: 5/120
• Center Bore: 74mm
• Thread Pitch: 12x1.5
• Series: DR
• Material: Proprietary High-Tensile Alloy
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1075740

Fits select 2012-2020 BMW (2, 3, 4, 5, 6 Series, M2, M3, M4, M5, M6) and Mini Cooper Paceman models.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track by 5mm, pushing the wheels out to be flush with the fender for a more aggressive stance and improved lateral stability. These spacers are engineered to solve the problem of recessed wheels, providing both aesthetic improvement and a broader contact patch for better handling.

Manufactured from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum while remaining exceptionally lightweight. The hubcentric design features a full-contact hub that replicates the factory geometry for precise wheel centering and vibration-free performance. As a DR Series component, these spacers fit between the wheel and hub and require longer wheel bolts for safe installation.

• Thickness: 5mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 14x1.25
• Material: Proprietary High-Strength Alloy
• Design: Hubcentric for even load distribution
• Manufacturer Part Number: 1075726
• Country of Origin: Germany

Fits select 1982-2018 BMW models including 1, 3, 5, 6, 7, 8 Series, X1, X3, X5, X6, Z3, Z4, and Z8.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to push wheels flush with the fender, instantly improving both aesthetic stance and lateral stability. These hubcentric spacers are engineered with a full-contact hub face—mirroring the factory BMW hub design—to ensure even load distribution and eliminate vibration at high speeds.

Constructed in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers possess a higher tensile strength than standard 6061-T6 billet. The DR Series design fits between the wheel and hub, requiring longer wheel bolts (sold separately) for a secure installation.

• Part Number: 1075725SW
• Thickness: 5mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 12x1.5
• Finish: Black Anodized
• Material: High-tensile proprietary alloy
• Manufacturing: Made in Germany

Fits 2005-2015 Ford Mustang models (V6, EcoBoost, GT, and Shelby variants).

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to improve handling performance and achieve a flush, aggressive stance. These 5mm spacers move the wheels out to the fender lip, eliminating the factory gap and improving lateral stability. Engineered for precision, these hubcentric spacers feature a full-contact hub design to ensure even load distribution and a vibration-free ride.

Unlike standard 6061-T6 billet, H&R Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy with a significantly higher tensile strength. The DR Series design fits between the wheel and the hub; installation requires longer wheel bolts or studs (sold separately) to ensure proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 70.5mm
• Thread Type: 1/2in. UNF
• Series: DR Series
• Material: High-tensile proprietary aluminum/magnesium alloy
• Finish: Hard anodized for durability
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1065705

Vehicle Fitment

Fits select 1991-2009 Acura Legend, NSX, and Honda S2000 models.

H&R Trak+ Wheel Spacers move your wheels out to be flush with the fender, instantly providing a more aggressive stance and improved lateral stability. These DRS Series spacers are designed to replace your existing wheel studs with the included longer versions, ensuring proper thread engagement for a secure fitment.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet. The hubcentric design features a full-contact hub to match the factory geometry, ensuring even load distribution and a vibration-free ride.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 70.1mm
• Thread Type: 12x1.5
• Series: DRS
• Material: High-tensile proprietary alloy
• MPN: 1065700
• Origin: Made in Germany

Fits select 1990-2012 Mitsubishi 3000GT and Eclipse models.

H&R Trak+ Wheel Spacers widen your vehicle's track to move the wheels out until they are flush with the fender, instantly improving both stance and lateral stability. The DRS Series spacers are designed to fit between the wheel and the hub, requiring the replacement of existing wheel studs with the longer versions included in the kit or available separately.

Unlike many competitors using standard 6061-T6 aluminum, H&R Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy. This material provides significantly higher tensile strength while remaining lightweight. Every spacer is hubcentric, featuring a full-contact hub flange that mirrors the factory design to ensure even load distribution and a vibration-free ride.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Type: 12x1.5
• Series: DRS
• Material: High-strength proprietary lightweight alloy
• Finish: Hard anodized for durability and corrosion resistance
• Manufacturer Part Number: 10656715
• Origin: Made in Germany

Fits select 1993-2014 Ford, Lincoln, Mazda, and Mercury vehicles including Fusion, MX-5 Miata, RX-8, and Mazda 3/5/6 models. These H&R Trak+ DRS Series wheel spacers widen the vehicle track by 5mm, moving the wheels out to be flush with the fenders for improved lateral stability and a more aggressive stance.

Constructed from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum while remaining lightweight. The hubcentric design features a full-contact hub to match the factory geometry, ensuring even load distribution and a vibration-free fit. As part of the DRS Series, these spacers require replacing the factory wheel studs with the included longer H&R studs to maintain proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Type: 12x1.5
• Series: Trak+ DRS
• Material: Proprietary High-Strength Alloy
• Manufacturing: Made in Germany
• MPN: 10656710

Fits select 1987-2015 Nissan and Infiniti models including 240SX, 300ZX, 350Z, G35, G37, and Q60. These H&R Trak+ 5mm DRS Series Wheel Spacers provide a wider, more aggressive stance by pushing your wheels out to be flush with the fender. This not only improves the aesthetic of your vehicle but also enhances lateral stability and handling by widening the track.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure even load distribution and eliminate vibration. As part of the DRS series, these spacers include longer wheel studs that must be installed to replace the factory hardware, ensuring proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3 (5x4.5)
• Center Bore: 66.2mm
• Thread Pitch: 12x1.25
• Series: Trak+ DRS
• Material: Proprietary high-strength alloy
• Manufacturer Part Number: 1065662

Fits select 1991-2020 Acura and Honda models (including NSX, S2000, Civic, and Accord) with a 5x114.3 bolt pattern and 64.1mm center bore.

H&R Trak+ DRS Series Wheel Spacers widen your vehicle's track for improved handling and a flush, aggressive stance. These spacers are engineered to be hubcentric, utilizing a full-contact hub design similar to factory specifications to ensure even load distribution and eliminate vibration. Unlike common 6061-T6 billet aluminum spacers, Trak+ spacers are manufactured from a proprietary lightweight aluminum/magnesium alloy with significantly higher tensile strength for maximum durability.

The DRS Series is designed for applications where the spacer is placed between the wheel and the hub; this kit requires the removal of factory studs and installation of the included longer H&R wheel studs to ensure proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 64.1mm
• Thread Type: 12x1.5
• Series: DRS
• Material: Proprietary high-tensile strength alloy
• Manufacturing: Made in Germany
• Part Number: 1065640

Fits select 1986-2015 Lexus and Toyota models, including GS, IS, LS, SC, RX, Camry, Matrix, MR2, Solara, and Supra. These H&R Trak+ 5mm DRS Series spacers are designed to widen the vehicle track, allowing for a flush wheel-to-fender fitment and improved lateral stability.

Unlike generic spacers, H&R Trak+ units are hubcentric, featuring a full-contact hub design that centers the wheel perfectly to prevent vibration. The DRS Series specifically includes longer wheel studs that must be swapped with the factory studs to ensure proper thread engagement with the 5mm added thickness. They are manufactured from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet, reducing unsprung weight while maintaining high load-bearing capacity.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 60.1mm
• Thread Type: 12x1.5
• Series: DRS (includes extended studs)
• Material: High-strength proprietary light alloy
• Manufacturing: Made in Germany
• Manufacturer Part Number: 10656014