Fits select 1972-2020 Audi, Mercedes-Benz, Porsche, and Chrysler vehicles.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track by 5mm per side, pushing the wheels out to be flush with the fenders. This instantly improves the vehicle's stance and increases lateral stability. Unlike generic spacers, these are hubcentric and feature a full-contact hub design—matching the factory hub profile to ensure even load force distribution and a vibration-free ride.

Engineered and manufactured in Germany, Trak+ spacers are CNC-machined from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. This results in a component that is both stronger and lighter. The black finish offers a clean, understated look that resists corrosion behind the wheel face.

• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Type: 14x1.5
• Series: DR (Requires extended length wheel bolts, sold separately)
• Material: Proprietary high-tensile strength alloy
• Finish: Black Anodized
• Country of Origin: Germany
• Manufacturer Part Number: 1055665SW

Fits select 1972-2020 Audi, Chrysler, Mercedes-Benz, and Porsche models. Optimize your vehicle's stance and improve lateral stability with H&R Trak+ DR Series wheel spacers. These 5mm spacers move the wheel outward to sit flush with the fender, correcting offset and providing a wider track for better handling.

H&R Trak+ spacers are manufactured in Germany from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet. Precision CNC-machined for a hubcentric fit, they feature a full-contact hub design to ensure even load distribution and eliminate vibration. As part of the DR Series, these spacers fit between the wheel and hub and require longer wheel bolts (sold separately) for a secure installation.

• Series: Trak+ DR
• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Bolt Thread: 14x1.5
• Material: High-strength proprietary light alloy
• Finish: Hard-anodized for durability
• MPN: 1055665
• Origin: Made in Germany

Fits select 1990-2020 Audi, Volkswagen, and Bentley models (2.0T).

H&R Trak+ DR Series Wheel Spacers move your wheels out to be flush with the fender, instantly providing a more aggressive stance and improved lateral stability. Unlike standard 6061-T6 billet aluminum spacers, these are manufactured from a proprietary aluminum/magnesium alloy with a significantly higher tensile strength. The hubcentric design features a full-contact hub to ensure even load distribution and precise fitment, mirroring the factory hub for vibration-free performance.

The DR Series 5mm spacers fit between the wheel and hub. These require the use of longer wheel bolts (sold separately) to ensure proper thread engagement. All H&R Trak+ spacers are 100% made in Germany and meet ISO 9001 quality assurance standards.

• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 57.1mm
• Thread Type: 14x1.5
• Finish: Black
• Material: Proprietary High-Tensile Light Alloy
• Series: DR
• MPN: 1055571SW

Fits select 1984-2015 Audi and Volkswagen models including A3, A4, A6, S4, Golf, GTI, Jetta, and Passat (2.0T / 1.8T).

The H&R Trak+ DR Series Wheel Adaptors solve center bore compatibility issues by allowing wheels with a 66.5mm center bore to be mounted on vehicles with a 57.1mm hub. These hubcentric spacers effectively move the wheel outward by 5mm, widening the vehicle's track for improved stability and a more aggressive, flush stance against the fender. Unlike generic spacers, these are engineered with a hub-centric design to ensure a perfect fit and eliminate vibration at high speeds.

• Manufactured from a proprietary aluminum/magnesium alloy for high tensile strength and reduced unsprung weight.
• Precision CNC machined for an exact fit and surface finish.
• Hard anodized for increased surface durability and corrosion resistance.
• Adapts 57.1mm vehicle hub to 66.5mm wheel center bore.
• Thickness: 5mm (10mm per axle total track widening).
• Made in Germany.
• Manufacturer Part Number: 1055571665.

Fits select 1990-2020 Audi, Volkswagen, and Bentley models including A3, A4, A6, Golf, Jetta, and Continental (2.0T).

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to move the wheels out flush with the fenders, instantly improving lateral stability and providing a more aggressive stance. These spacers are engineered from a proprietary lightweight aluminum/magnesium alloy that delivers higher tensile strength than standard 6061-T6 billet aluminum.

Every H&R Trak+ spacer is hubcentric, featuring a full-contact hub design that ensures even load distribution and lateral support, mirroring the factory hub for vibration-free performance. The DR Series spacers fit between the wheel and the hub and require longer wheel bolts for installation (sold separately).

• Hubcentric design for precise fitment and factory-level ride quality
• Manufactured from a proprietary high-tensile strength alloy for maximum durability
• Lighter weight and higher strength than standard 6061-T6 aluminum
• Enhances handling performance and solves clearance issues
• Made in Germany

• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 57.1mm
• Bolt Thread: 14x1.5
• Series: Trak+ DR Series
• MPN: 1055571

Fits select 2015-2020 Jeep Renegade and 2017-2020 Alfa Romeo Giulia and Stelvio models. H&R Trak+ DR Series Wheel Spacers are designed to move your wheels out from the hub, creating a wider track and a flush, aggressive stance with the fender. This DR Series spacer fits between the wheel and the hub and requires longer wheel bolts (sold separately) for secure installation.

Engineering for performance and safety, these spacers are precision-machined from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet. The hubcentric design features a full-contact hub to ensure even load distribution and lateral support, maintaining factory-level smoothness while improving handling characteristics.

• Thickness: 5mm
• Bolt Pattern: 5/110
• Center Bore: 65.1mm
• Bolt Thread: 14x1.5
• Series: DR Series
• Material: High-tensile proprietary lightweight alloy
• Manufacturing: Made in Germany
• Part Number: 1045651

Fits select 1993-2009 Volvo 850, C70, S60, S70, S80, and V70 models (2.4T / 2.5T).

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to push wheels out until they are flush with the fender. This instantly improves your Volvo's stance while providing increased lateral stability and enhanced handling characteristics. Unlike generic spacers, these are hubcentric with a full-contact hub design to ensure even load distribution and prevent vibration.

Engineered and manufactured in Germany, Trak+ spacers are crafted from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet aluminum. This specific 5mm kit features a black finish for a discreet, factory-integrated look.

• Thickness: 5mm
• Bolt Pattern: 5/108
• Center Bore: 65mm
• Thread Type: 12x1.75
• Series: DR Series
• Material: Proprietary High-Strength Alloy
• Finish: Black
• MPN: 1035650SW

Note: DR Series spacers fit between the wheel and hub and require longer wheel bolts for installation (sold separately). Please verify your required bolt length based on the 5mm spacer thickness.

Fits select 1993-2009 Volvo 850, C70, S60, S70, S80, and V70 (2.4T / 2.5T).

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track by 5mm per side, pushing the wheels out to sit flush with the fenders. This eliminates the tucked-in factory look, providing a more aggressive stance and improved lateral stability. These spacers are designed for enthusiasts looking to fine-tune wheel fitment or clear suspension components after installing aftermarket wheels or brakes.

Precision-engineered in Germany, these hubcentric spacers are manufactured from a proprietary aluminum/magnesium alloy that offers significantly higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure even load distribution and lateral support, maintaining a vibration-free ride just like the factory intended.

• Thickness: 5mm
• Bolt Pattern: 5/108
• Center Bore: 65mm
• Thread: 12x1.75
• Series: DR Series (Requires longer wheel bolts, sold separately)
• Material: Proprietary high-strength alloy
• Manufacturing: Made in Germany
• MPN: 1035650

Fits select 2004-2019 Ford Focus, Fusion, Lincoln MKZ, and Volvo S40/V50.

H&R Trak+ Wheel Spacers move your wheels out to be flush with the fender, instantly improving your vehicle's stance and widening the track for enhanced handling characteristics. These DRS Series spacers are designed to be hubcentric, featuring a full-contact hub that mirrors the factory geometry for precise lateral support and even load distribution across the hub face.

Manufactured in Germany, Trak+ spacers are crafted from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. The DRS Series provides a lightweight yet durable solution to achieve the perfect wheel fitment while maintaining factory-level safety and vibration-free operation.

• Thickness: 5mm
• Bolt Pattern: 5/108 (5x108)
• Center Bore: 63.3mm
• Thread Type: 12x1.5
• Series: Trak+ DRS
• Material: High-strength proprietary light alloy
• Manufacturing: CNC machined in Germany
• Manufacturer Part Number: 10356331

Fits select 1991-2019 Ford Contour, Escort, Fiesta, and Focus models.

H&R Trak+ DRS Series wheel spacers are designed to move your wheels flush with the fenders, providing a more aggressive stance and improved handling characteristics. By widening the track width, these spacers increase lateral stability and allow for precise fitment correction. These DRS Series spacers are manufactured from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet aluminum.

Unlike universal spacers, these are hubcentric, featuring a full-contact hub design that mirrors the factory geometry. This ensures even load force distribution and provides essential lateral support for the wheel assembly. As part of the DRS series, these spacers are designed for use with extended wheel studs to maintain proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 4/108
• Center Bore: 63.3mm
• Thread Pitch: 12x1.5
• Material: High-strength proprietary alloy
• Design: Hubcentric for precise wheel centering
• Manufacturing: Made in Germany
• Manufacturer Part Number: 10346331

Fits select 1990-2020 Subaru, Toyota, Scion, and Saab models (including BRZ, 86, FR-S, WRX, and Legacy).

H&R Trak+ Wheel Spacers eliminate the gap between the tire and the fender, pushing the wheels outward to create a flush, aggressive stance. This 5mm DRS Series kit is engineered to improve both the aesthetic profile and lateral stability of your vehicle. By widening the track width, these spacers enhance turn-in response and overall handling characteristics.

Unlike universal alternatives, Trak+ spacers are hub-centric, featuring a full-contact hub design that matches the factory bore for even load distribution and a vibration-free ride. Each spacer is manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, providing higher tensile strength than traditional 6061-T6 billet aluminum. The DRS Series is designed specifically for vehicles with wheel studs, ensuring a secure and precise fitment.

• Thickness: 5mm
• Bolt Pattern: 5/100
• Center Bore: 56mm
• Thread Type: 12x1.25
• Color: Black
• Material: Proprietary High-Strength Alloy
• Series: Trak+ DRS
• Manufacturer Part Number: 1025560SW

Fits select 1990-2020 Subaru (Forester, Impreza, Legacy, BRZ), Toyota 86, Scion FR-S, and Saab 9-2X models. These H&R Trak+ DRS Series wheel spacers widen the vehicle track by 5mm per side to provide a flush fitment and a more aggressive stance.

H&R Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy that is significantly stronger and lighter than standard 6061-T6 billet. The hubcentric design features a full-contact hub to ensure precise load distribution and lateral support, mirroring the factory hub's interface. The DRS Series specifically includes longer wheel studs that must be pressed into the hub to accommodate the increased spacer thickness.

• Part Number: 1025560
• Spacer Thickness: 5mm
• Bolt Pattern: 5/100 (5x100)
• Center Bore: 56mm
• Thread Type: M12 x 1.25
• Material: High-tensile proprietary alloy
• Includes extended-length wheel studs
• Made in Germany