Fits select 2022-2025 Ford F-150 and F-150 Lightning models.

The Hellwig 7905 Front Sway Bar Kit is a direct-fit handling upgrade designed to combat body roll and improve stability under heavy loads or towing conditions. Constructed from solid, heat-treated 4140 chromoly steel, this 1-3/8 inch diameter bar provides significantly more stiffness than the factory unit. By reducing lateral weight transfer during cornering, it keeps your truck flatter through turns for increased driver confidence and safety.

This kit is engineered for a straightforward installation, mounting directly to factory locations and utilizing the original end links. Whether you are enhancing an F-150 Lightning for daily drivability or upgrading a Raptor for better control, this sway bar delivers consistent performance and durability.

• Precision engineered from solid, heat-treated chromoly steel
• Large 1-3/8 inch diameter for superior roll control and stiffness
• Direct bolt-on installation; reuses factory end links
• Durable powder-coated finish for corrosion resistance
• Includes all necessary hardware and polyurethane bushings
• Manufacturer Part Number: 7905
• Limited Lifetime Warranty

Fits select 2021-2025 Ford Bronco models including Badlands, Wildtrak, Raptor, and Outer Banks.

The Hellwig 7900 rear sway bar is a technical handling upgrade engineered to reduce body roll and improve lateral stability. While factory sway bars often struggle with the increased center of gravity or added weight from towing and off-road gear, this solid chromoly bar provides the necessary stiffness to improve cornering traction and driver confidence.

This sway bar is manufactured from solid, heat-treated chromoly steel to ensure consistent spring rates and long-term durability. It features a 3/4-inch diameter for a significant increase in roll stiffness over the OE components. The kit is designed for a direct bolt-on installation, utilizing precision-engineered hardware to integrate with the factory mounting points.

• Part Type: Rear Sway Bar
• Material: Solid heat-treated chromoly steel
• Diameter: 3/4 inch
• Installation: Quick bolt-on design
• Manufacturer Part Number: 7900
• Fits vehicle-specific submodels including Badlands, Raptor, Wildtrak, and Heritage Edition

Fits select 2011-2016 Ford F-250 and F-350 Super Duty 4WD models with a 4-6 inch suspension lift.

Upgrading to a Hellwig rear sway bar is one of the most effective ways to improve the handling and stability of your lifted Ford Super Duty. Engineered specifically for vehicles with 4-6 inches of lift, this 1-1/8 inch diameter solid sway bar provides the necessary torsional stiffness to combat body roll. Whether you are navigating winding roads or managing heavy tow/haul conditions, this bar delivers increased cornering control and a more planted feel.

The Hellwig 7890 is manufactured from high-strength, heat-treated chromoly steel for maximum durability and consistent performance under stress. It replaces or supplements the factory equipment with larger-than-stock diameter components and heavy-duty hardware to optimize suspension geometry on lifted applications.

• Specifically designed for 4WD models with 4" to 6" lift kits
• 1-1/8 inch solid heat-treated 4140 chromoly steel construction
• Reduces body roll and improves driver control during towing and hauling
• Includes all necessary heavy-duty mounting hardware
• Manufacturer Part Number: 7890
• Limited Lifetime Warranty

Fits 2009-2026 Dodge and Ram 1500 4WD models equipped with a 2-inch to 4-inch suspension lift.

Correct the handling deficiencies common in lifted trucks with the Hellwig 7883 Rear Sway Bar. Designed specifically for vehicles with 2-4 inches of rear lift, this upgrade provides the necessary torsional stiffness to reduce body roll and improve lateral stability. Whether you are navigating off-road trails, towing a trailer, or commuting daily, this sway bar delivers more predictable cornering and increased driver control by better distributing weight across the axle.

Constructed from solid, 7/8-inch diameter 4140 chromoly steel, this bar is heat-treated for maximum strength and longevity. The bolt-on design allows for a straightforward installation using heavy-duty hardware and precision-engineered components that replace the thinner, more flexible factory equipment. This is a critical upgrade for any owner looking to maintain safety and comfort while managing the higher center of gravity associated with lifted suspension systems.

• Manufacturer Part Number: 7883
• Bar Diameter: 7/8 inch
• Material: Solid heat-treated 4140 chromoly steel
• Finish: Powder-coated for corrosion resistance
• Fitment: 4WD models only with 2" to 4" lift
• Includes all necessary mounting hardware and bushings
• Limited Lifetime Warranty

Fits select 2000-2005 Ford Excursion and Expedition 4WD models with a 4-6 inch lift.

Engineered to mitigate the instability of a raised center of gravity, the Hellwig 7878 rear sway bar provides an immediate improvement in handling and cornering control. This upgrade is essential for lifted SUVs used for towing or hauling, where factory bars often fail to provide adequate roll stiffness. The bar is manufactured from solid, heat-treated 4140 chromoly steel, offering superior strength and durability compared to hollow or standard steel alternatives. This bolt-on kit reduces body roll and improves tire contact patches for safer, more predictable driving in all conditions.

• Construction: Solid heat-treated 4140 chromoly steel
• Diameter: 1-1/4 inch
• Fitment: Rear axle, 4WD models with 4-6 inch suspension lift
• Installation: Quick bolt-on design with precision-engineered components
• Finish: Durable powder coat
• Manufacturer Part Number: 7878
• Warranty: Limited Lifetime Warranty

Fits 1966-1977 Ford Bronco models (Base, Custom, Northland, Ranger, Roadster, Sport, and Wagon) equipped with a 3-4" lift.

Improve the handling and stability of your lifted classic Bronco with the Hellwig front sway bar. Engineered to mitigate the increased body roll often associated with higher centers of gravity, this 1-1/8" solid sway bar significantly increases roll stiffness. The result is improved cornering performance, reduced sway during towing, and a more controlled feel during everyday driving.

Constructed from heat-treated chromoly steel, this bar is built for the rigors of off-road and on-road use. The adjustable rate design allows for fine-tuning of the suspension's resistance to suit your specific driving style or load requirements. This kit replaces insufficient factory components or adds essential stabilization to Broncos that were not originally equipped with a front bar.

• 1-1/8" diameter solid, heat-treated chromoly steel construction
• Engineered specifically for vehicles with 3-4" of lift
• Adjustable rate to customize handling characteristics
• Reduces body roll and improves steering response
• Includes necessary mounting hardware (drilling may be required)
• Manufacturer Part Number: 7867
• Limited Lifetime Warranty

Fits 2015-2022 Chevrolet Colorado and GMC Canyon models with 2-4-inch suspension lifts.

Improve your truck's handling and stability with the Hellwig 7849 rear sway bar. Specifically engineered for lifted applications, this 1-inch diameter sway bar provides the necessary lateral stiffness to counteract the increased center of gravity found on modified trucks. Whether you are navigating tight corners on the street or managing a heavy trailer, this upgrade significantly reduces body roll and improves driver control.

Constructed from solid, heat-treated chromoly, this sway bar offers superior durability and resistance to fatigue compared to smaller, hollow factory units. The bolt-on installation utilizes precision-engineered components designed to optimize suspension geometry on vehicles with 2-4 inches of lift, ensuring the bar operates within its ideal range for maximum effectiveness.

• Part Number: 7849
• Diameter: 1 Inch
• Construction: Solid, Heat-Treated Chromoly
• Fitment: Fits 2015-2022 Chevrolet Colorado & GMC Canyon with 2-4" Lift
• Installation: Bolt-on with included hardware
• Warranty: Limited Lifetime Warranty

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models (including LTD, AT4, and Trail Boss) equipped with a 2-4 inch suspension lift.

Engineered to significantly improve handling and stability, the Hellwig 7844 rear sway bar is a critical upgrade for lifted trucks that experience increased body roll due to a higher center of gravity. This solid, heat-treated chromoly sway bar provides the necessary stiffness to maintain control during cornering and when hauling heavy loads or towing trailers. By reducing body lean, it enhances driver comfort and safety without compromising the vehicle's off-road capabilities.

This 1-1/8 inch diameter sway bar is designed for a precise bolt-on installation using heavy-duty hardware. It replaces or supplements the factory setup to provide more consistent performance under demanding conditions. The solid chromoly construction ensures long-term durability and resistance to fatigue.

• Manufacturer Part Number: 7844
• Diameter: 1-1/8 inch (28.5mm)
• Material: Solid, heat-treated 4140 chromoly steel
• Finish: Durable powder coat for corrosion resistance
• Design: Specific to vehicles with 2-4 inch rear lift heights
• Benefits: Reduces body roll, improves lateral stability, and enhances towing control
• Installation: Direct bolt-on with included mounting hardware
• Warranty: Limited Lifetime Warranty

Fits 2020-2021 Jeep Gladiator models (including Sport, Overland, Rubicon, and Mojave) equipped with a 3-5 inch suspension lift.

The Hellwig 7843 rear sway bar is a critical handling upgrade for lifted Gladiators, providing the necessary roll stiffness to combat the higher center of gravity found in modified rigs. Manufactured from 7/8-inch solid, heat-treated 4140 chromoly steel, this sway bar significantly reduces body roll and improves lateral stability. The adjustable-rate design allows you to fine-tune your suspension's resistance to match your specific load requirements, whether you are traversing technical trails or hauling heavy gear.

• Specifically engineered for vehicles with 3-5 inch suspension lifts
• 7/8-inch diameter solid, heat-treated chromoly steel construction
• Adjustable rate design for customizable handling and performance
• Reduces body roll for improved cornering, comfort, and safety
• Direct bolt-on installation with included precision-engineered hardware
• Manufacturer Part Number: 7843
• Limited Lifetime Warranty

Fits select 1999-2013 Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 trucks (including Classic, HD, and Hybrid models).

Engineered to improve handling and reduce body roll, the Hellwig 7800 rear sway bar is a critical upgrade for truck owners who tow, haul heavy loads, or simply want more precise cornering. While many factory sway bars are undersized for modern demands, this solid 1-1/8 inch bar provides significantly increased roll stiffness, ensuring the vehicle remains flatter through turns and more stable during evasive maneuvers.

Constructed from high-strength, heat-treated chromoly steel, this sway bar is built to withstand the rigors of heavy-duty use. The bolt-on design allows for a straightforward installation using provided hardware, mounting directly to the vehicle's frame and axle to optimize suspension geometry.

• Part Number: 7800
• Bar Diameter: 1-1/8 inch (1.125")
• Material: Solid heat-treated chromoly steel
• Application: Rear suspension
• Finish: Powder coated for corrosion resistance
• Includes: All necessary mounting hardware and bushings
• Warranty: Limited Lifetime Warranty

Fits select 2021-2024 Ram 1500 models, including TRX, Rebel, Laramie, and Limited. This Hellwig front sway bar is an essential handling upgrade designed to minimize body roll and improve cornering stability without sacrificing ride quality.

Precision-engineered for the modern Ram 1500, this bar is manufactured from solid, heat-treated 4140 chromoly steel to provide superior stiffness compared to factory units. Whether you are navigating daily commutes or managing heavy loads in tow/haul conditions, the increased roll stiffness enhances driver control and overall safety. The kit is designed for a straightforward bolt-on installation and is engineered to reuse your vehicle's factory end links for maximum compatibility.

• Part Number: 7795
• Diameter: 1 3/8 inches
• Position: Front
• Material: Solid heat-treated chromoly steel
• Installation: Quick bolt-on; reuses factory end links
• Warranty: Limited Lifetime Warranty

Fits select 2021-2025 Ram 1500 models, including TRX, Rebel, RHO, Laramie, and Big Horn.

Hellwig adjustable rear sway bars are engineered to significantly reduce body roll and improve stability, whether you are navigating tight corners in a TRX or towing a heavy load with a standard Ram 1500. This 7/8-inch diameter bar replaces the often-undersized factory unit with a solid, heat-treated chromoly component, providing the increased stiffness necessary for better handling, driver comfort, and safety.

• Material: Solid, heat-treated chromoly steel
• Diameter: 7/8 inch (22.2mm)
• Design: Adjustable rate for fine-tuning suspension response
• Benefits: Reduces body roll, improves cornering traction, and enhances towing stability
• Installation: Quick bolt-on installation with precision-engineered hardware
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 7794

Fits 2009-2026 Dodge and Ram 1500 2WD/4WD models including Laramie, SLT, Sport, Tradesman, Rebel, and TRX.

The Hellwig 7793 rear sway bar is a significant suspension upgrade designed to replace or supplement an inadequate factory rear bar. Engineered to mitigate the excessive body roll common in half-ton trucks, this 1-inch diameter bar provides the necessary stiffness to improve cornering stability and steering response. This is especially critical for vehicles under heavy load or while towing, where maintaining a level chassis improves both driver comfort and safety.

Constructed from high-strength, heat-treated chromoly steel, this solid sway bar is built to withstand rigorous use on and off the pavement. The kit features a direct bolt-on design, utilizing precision-engineered components for a straightforward installation that integrates with the existing suspension geometry.

• Part Number: 7793
• Bar Diameter: 1.00 inch
• Material: Solid, heat-treated chromoly steel
• Reduces body roll and improves weight distribution during cornering
• Optimizes handling performance for towing and hauling conditions
• Includes all necessary mounting hardware
• Limited Lifetime Warranty

Fits 2022-2026 Toyota Tundra 2WD/4WD (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Capstone).

Improve your truck's handling and stability with the Hellwig 7792 rear sway bar. Designed specifically for the 2022-2026 Toyota Tundra chassis, this 1-1/4 inch diameter sway bar provides a significant increase in roll stiffness over the factory equipment. By reducing body roll during cornering and improving weight distribution, this upgrade is essential for maintaining control during daily driving and heavy towing or hauling conditions.

The sway bar is manufactured from solid, heat-treated 4140 chromoly steel for maximum durability and consistent performance. This complete kit features a straightforward bolt-on installation, mounting to the vehicle's factory points with the included heavy-duty hardware and bushings.

• Part Number: 7792
• Bar Diameter: 1-1/4 inch
• Material: Solid heat-treated 4140 chromoly steel
• Reduces body roll for improved cornering and safety
• Engineered for heavy-duty tow/haul applications
• Simple bolt-on installation with included hardware
• Limited Lifetime Warranty

Fits select 2020-2026 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD models. This Hellwig 1.5-inch diameter front sway bar is engineered to provide a significant improvement in handling and stability, especially for heavy-duty trucks frequently used for towing or hauling heavy loads.

Constructed from solid, heat-treated 4140 chromoly steel, this sway bar increases the front-end stiffness of the vehicle to minimize body roll during cornering. It is designed as a direct bolt-on upgrade that reuses the factory end links, ensuring a straightforward installation process that optimizes the vehicle's suspension geometry without requiring permanent modifications.

• Part Number: 7789
• Material: Solid heat-treated 4140 chromoly steel
• Bar Diameter: 1.5 inches (38mm)
• Installation: Bolt-on; reuses factory end links
• Finish: Powder-coated for corrosion resistance
• Improves cornering traction and steering response
• Reduces lateral body roll and sway in tow/haul conditions
• Includes high-quality mounting hardware and bushings
• Limited Lifetime Warranty

Fits 2020-2026 Ram 1500 2WD/4WD including Big Horn, Laramie, Rebel, TRX, and Warlock models.

The Hellwig 7787 Front Sway Bar is a critical handling upgrade designed to significantly reduce body roll and improve lateral stability on the Ram 1500. While factory sway bars are often sufficient for empty beds, they frequently underperform under the stress of modern towing and hauling demands. This 1-3/8 inch diameter solid sway bar provides an immediate improvement in cornering flatly and maintaining vehicle composure during high-load conditions.

Engineered for durability and precision, this bar is manufactured from high-strength, heat-treated chromoly steel. It features a direct bolt-on installation, mounting to factory points for a straightforward upgrade that enhances safety, comfort, and everyday drivability.

• Part Number: 7787
• Diameter: 1-3/8 inches (35mm)
• Material: Solid heat-treated 4140 chromoly steel
• Finish: Powder coated for corrosion resistance
• Configuration: Front mounting location
• Application: 2WD and 4WD models
• Warranty: Limited Lifetime Warranty

Fits 2021-2025 Ford F-150 2WD and 4WD models, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, and STX trims.

Improve the handling and stability of your F-150 with this Hellwig front sway bar. Engineered to replace or upgrade the factory unit, this 1-3/8 inch diameter bar significantly reduces body roll and improves cornering traction. It is particularly effective for vehicles used in heavy tow/haul conditions where factory bars often prove insufficient for controlling lateral weight transfer.

Constructed from solid, heat-treated chromoly steel, this sway bar offers a precise fit and long-term durability. The design allows for a straightforward bolt-on installation using the vehicle's factory end links, making it an essential upgrade for both daily drivability and heavy-duty performance.

• Part Number: 7786
• Diameter: 1-3/8 inch (1.375")
• Material: Solid heat-treated chromoly steel
• Placement: Front
• Reuses factory end links for installation
• Limited Lifetime Warranty

Fits select 2020-2026 Chevrolet Silverado 2500 HD / 3500 HD and GMC Sierra 2500 HD / 3500 HD 2WD and 4WD models.

Upgrade your heavy-duty truck's handling and stability with the Hellwig 7782 Rear Sway Bar. Engineered to solve the excessive body roll and instability common in modern HD trucks, this sway bar is a vital upgrade for vehicles frequently used for towing, hauling, or carrying heavy slide-in campers. By replacing the undersized factory unit with a larger diameter, higher-rate bar, you significantly improve cornering traction and driver control.

The bar is manufactured from high-strength, heat-treated chromoly steel, providing superior stiffness without the weight penalty of standard mild steel. Its solid construction ensures consistent performance under the most demanding load conditions. This kit is designed for a straightforward bolt-on installation using factory mounting points and includes all necessary hardware for a complete setup.

• Part Number: 7782
• Diameter: 1.25 inch (1-1/4")
• Material: Solid, heat-treated chromoly steel
• Finish: Durable powder coat for corrosion resistance
• Improves cornering stability and weight distribution
• Reduces body roll during towing and heavy hauling
• Limited Lifetime Warranty

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models (2WD/4WD), including Silverado 1500 LTD and GMC Sierra AT4/Denali trims.

The Hellwig 7780 rear sway bar is a critical handling upgrade designed to improve stability and reduce body roll on late-model GM half-ton trucks. Whether navigating daily commutes or managing heavy tow/haul demands, this bar increases the vehicle's lateral stiffness, providing a more planted feel through corners and better control in crosswinds. By upgrading the rear suspension's torsional resistance, it corrects the understeer and swaying common in stock truck configurations.

Constructed from solid, heat-treated chromoly steel, this 1-1/8 inch diameter bar is significantly more rigid than factory alternatives. It features a precision-engineered design for a straightforward bolt-on installation using the provided hardware, ensuring a factory-quality fit without the need for extensive modifications.

• Increases roll stiffness for improved handling, comfort, and safety
• Optimizes stability for everyday drivability and heavy towing conditions
• Forged from solid, heat-treated chromoly steel
• Diameter: 1-1/8 inch
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: 7780
• Limited Lifetime Warranty

Fits all 2020-2025 Jeep Gladiator models including Sport, Rubicon, Mojave, and Overland.

The Hellwig 7779 rear sway bar is a vital handling upgrade for the Jeep Gladiator, designed specifically to reduce body roll and improve lateral stability. While the factory sway bars are often insufficient for the increased loads of towing or off-road gear, this solid chromoly replacement increases roll stiffness for better driver control and flatter cornering.

• Material: Solid, heat-treated 4140 chromoly steel for superior strength and fatigue resistance.
• Diameter: 7/8-inch (22.2mm) solid bar provides a significant increase in stiffness over the OE unit.
• Adjustability: Includes multiple mounting points to allow for an adjustable rate, letting you tune the suspension for daily driving or heavy hauling.
• Installation: Engineered as a quick bolt-on upgrade that reuses factory end links for ease of installation.
• Performance: Improves overall safety and comfort by minimizing sway in crosswinds and during high-speed maneuvers.
• Warranty: Backed by a Limited Lifetime Warranty.
• MPN: 7779

Fits 2019-2026 Mercedes-Benz Sprinter 3500 Base models. This Hellwig rear sway bar (MPN: 7777) is an essential upgrade for Sprinter owners dealing with the instability and body roll common in high-roof or heavily loaded dually vans. By replacing or supplementing the factory bar with a larger-diameter, 1.5-inch solid chromoly component, this kit significantly increases roll stiffness for improved cornering stability and safety in heavy tow/haul conditions.

Precision-engineered from heat-treated 4140 chromoly steel, the bar is designed to handle the high stress of commercial and RV applications. It bolts directly to the factory mounting points with included hardware, providing an immediate improvement in steering response and driver comfort without compromising ride quality.

• Part Number: 7777
• Bar Diameter: 1-1/2 inch (1.5")
• Material: Solid, heat-treated chromoly steel
• Reduces body roll and improves stability in crosswinds and corners
• Direct bolt-on installation with included hardware
• Manufacturer Limited Lifetime Warranty

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including Sport, Sahara, Rubicon, and 4xe variants.

The Hellwig 7775 rear sway bar is a heavy-duty suspension upgrade engineered to significantly reduce body roll and improve lateral stability. Manufactured from 7/8-inch solid, heat-treated chromoly steel, this bar provides the increased stiffness necessary to handle the higher center of gravity found in modern Wranglers, especially when loaded with gear or towing. The adjustable rate design allows owners to fine-tune the rear roll stiffness to balance the vehicle for different terrain or load conditions, providing a more confident feel through corners and during high-speed maneuvers.

• Part Type: Rear Sway Bar
• Diameter: 7/8 inch
• Material: Solid heat-treated chromoly steel
• Rate: Adjustable for customized handling
• Installation: Bolt-on replacement for factory hardware
• Manufacturer Part Number: 7775
• Warranty: Limited Lifetime Warranty

Fits select 2014-2021 Infiniti QX80 and Nissan Armada (Base, Limited, Luxe, Midnight Edition, Platinum, Platinum Reserve, S, SL, and SV). This 1-1/8 inch solid rear sway bar from Hellwig (MPN 7769) is engineered to significantly reduce body roll and improve lateral stability. By increasing the roll stiffness of the rear suspension, this bar provides more predictable handling and improved safety during high-speed cornering and emergency maneuvers.

Constructed from heat-treated 4140 chromoly steel, the solid-core design offers superior strength and consistent performance under the extreme loads found in heavy towing or hauling applications. The increased diameter over the stock component ensures your SUV remains level and controlled. This kit is designed for a direct-fit upgrade and reuses the factory end links to maintain correct suspension geometry.

• Bar Diameter: 1-1/8 inch (1.125 in)
• Material: Solid heat-treated 4140 chromoly steel
• Application: Rear suspension
• Function: Reduces body roll and improves stability in tow/haul conditions
• Installation: Reuses factory end links
• Finish: Durable powder coat
• Warranty: Manufacturer Limited Lifetime Warranty
• Part Number: 7769

Fits 2014-2025 Ram ProMaster 1500, 2500, and 3500 (All trims).

Designed to combat the body roll and instability common in high-profile commercial vans, the Hellwig 7768 rear sway bar significantly improves handling, comfort, and safety. This upgrade is particularly effective for vehicles used in heavy tow/haul applications or those converted into campers, where a high center of gravity can compromise stability.

This sway bar is forged from solid, heat-treated 4140 chromoly steel, providing superior stiffness and durability compared to stock components. The adjustable rate design allows fleet operators and van owners to fine-tune the suspension to their specific load requirements, ensuring flatter cornering and better weight distribution in both daily driving and demanding towing conditions.

• Replaces or upgrades factory rear sway bar for improved lateral stability
• Material: Solid, heat-treated 4140 chromoly steel
• Diameter: 1-1/8 inch
• Adjustable rate for custom suspension tuning
• Bolts to factory mounting points with included hardware
• Finish: Durable powder coat for long-term corrosion resistance
• Manufacturer Part Number: 7768
• Limited Lifetime Warranty

Fits select 2014-2025 Ram 3500 and 2014-2017 Ram ProMaster 1500, 2500, and 3500.

Improve your vehicle's stability and cornering performance with the Hellwig 7767 rear sway bar. Engineered from solid, heat-treated chromoly steel, this 1-1/4 inch diameter bar significantly increases roll stiffness. This upgrade is essential for maintaining control during heavy tow/haul conditions and provides a more planted, confident feel during everyday driving by reducing body roll and improving weight distribution across the rear axle.

• Manufactured from solid, heat-treated 4140 chromoly steel for maximum durability
• 1.25-inch bar diameter increases stiffness over factory components
• Adjustable rate design allows for fine-tuning based on your load and driving style
• Designed to reuse factory end links for a straightforward installation
• Corrosion-resistant finish for long-lasting protection
• Manufacturer Part Number: 7767
• Includes Limited Lifetime Warranty

Fits select 2016-2026 Ford Transit-350 and Transit-350 HD models. This Hellwig rear sway bar is a vital suspension upgrade for Transit owners who demand better handling, especially under heavy tow/haul conditions. Engineered to replace or supplement factory components, this 1-3/8 inch diameter bar significantly reduces body roll and increases lateral stiffness, providing a more stable and controlled driving experience through corners and in crosswinds.

Manufactured from solid, heat-treated chromoly steel, this sway bar is built for durability and long-term performance. The adjustable rate design allows you to fine-tune the suspension's resistance to suit your specific load requirements. This kit is designed for a straightforward bolt-on installation and is engineered to reuse the factory end links for maximum compatibility.

• Part Number: 7766
• Material: Solid, heat-treated chromoly steel
• Diameter: 1-3/8 inch
• Position: Rear
• Features: Adjustable rate for custom tuning
• Hardware: Reuses factory end links; includes all other necessary mounting components
• Warranty: Limited Lifetime Warranty

Fits 2017-2026 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Limited, Platinum, XL, XLT).

Designed to address the handling challenges of heavy-duty trucks, the Hellwig 7761 rear sway bar is a critical upgrade for owners who frequently tow or haul heavy loads. While most Ford Super Duty trucks come with factory stabilization, the OEM components are often undersized for maximum GVWR scenarios. This 1-1/4 inch solid rear sway bar significantly increases roll stiffness, reducing body roll and improving lateral stability through corners and during high-wind highway driving.

Manufactured from high-strength, heat-treated 4140 chromoly steel, this bar provides consistent performance without losing its rate over time. The solid construction and precision-engineered mounting hardware ensure a direct fit to the vehicle's chassis, providing immediate improvements in steering response and driver confidence. The kit includes all necessary hardware and bushings for a straightforward bolt-on installation.

• Replaces or upgrades factory rear sway bar for improved stability
• Reduces body roll for better handling and comfort while towing
• Manufactured from solid 1.25-inch heat-treated chromoly steel
• Durable powder-coated finish for corrosion resistance
• Includes high-quality mounting hardware and bushings
• Manufacturer Part Number: 7761
• Limited Lifetime Warranty

Fits 1997-2006 Jeep Wrangler models including SE, Sahara, Sport, X, Rubicon, and Unlimited.

The Hellwig 7750 front sway bar is a high-performance handling upgrade designed to significantly reduce body roll and improve cornering stability. Constructed from 1-1/4 inch solid, heat-treated 4140 chromoly steel, this bar provides superior stiffness compared to factory equipment, making it an essential modification for lifted Jeeps, heavy tow/haul conditions, or simply improving everyday drivability. The adjustable rate design allows you to fine-tune your suspension's response to match your specific driving style and vehicle load.

• Diameter: 1-1/4 inch solid bar
• Material: Heat-treated chromoly steel for maximum tensile strength
• Installation: Quick bolt-on installation to factory mounting points
• Adjustability: Adjustable rate for customized handling control
• Durability: Engineered for increased comfort, safety, and reduced sway
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 7750

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon mid-size trucks.

Improve the handling and stability of your truck with the Hellwig 7745 rear sway bar. While factory suspension often struggles with the lateral forces generated during cornering or when hauling heavy loads, this 1-inch solid sway bar significantly increases roll stiffness. By better distributing weight across the tires, it reduces body roll and improves driver control during both everyday commuting and demanding tow/haul conditions.

This sway bar is manufactured from high-strength, heat-treated chromoly steel for maximum durability and consistent performance. The solid construction ensures it can withstand the stresses of off-road use on trims like the ZR2 and AT4, or the heavy tongue weights associated with towing on the Denali and Z71 models. It features a direct bolt-on design for a straightforward installation using precision-engineered hardware.

• Reduces body roll and improves cornering traction
• Enhances safety and comfort during towing and hauling
• Solid, heat-treated chromoly steel construction
• Includes all necessary mounting hardware and bushings
• Manufacturer Part Number: 7745
• Limited Lifetime Warranty

• Diameter: 1 inch
• Material: Heat-treated 4140 chromoly
• Type: Solid
• Finish: Powder coated
• Position: Rear

Fits 2016-2023 Toyota Tacoma 2WD and 4WD models with 0-2" of rear lift.

The Hellwig 7744 rear sway bar is a precision-engineered suspension upgrade designed to significantly reduce body roll and improve cornering stability. Unlike factory bars that may struggle under heavy tow or haul loads, this solid, heat-treated chromoly bar provides the necessary stiffness for a more controlled driving experience. The adjustable rate design allows you to fine-tune the suspension response to your specific driving style or cargo demands.

This kit is designed to bolt onto factory mounting points, though drilling may be required for specific submodels. It is a critical upgrade for Tacoma owners looking to enhance safety and handling during everyday commutes or while navigating challenging terrains with a loaded bed.

• Manufacturer Part Number: 7744
• Material: Solid, heat-treated 4140 chromoly steel
• Bar Diameter: 3/4 inch
• Application: Rear suspension
• Fits 0-2" lift heights
• Adjustable rate for custom suspension tuning
• Reduces body roll and improves towing stability
• Limited Lifetime Warranty