Fits 1993-2002 Nissan Silvia S14 and S15.

The HKS single port internal wastegate actuator is a precision-engineered upgrade designed to replace the original equipment (OE) unit on the Nissan Silvia S14 and S15. This actuator provides more stable boost pressure control by maintaining consistent tension on the wastegate flapper, preventing the boost fluctuations often caused by weakened factory springs. This ensures the turbocharger reaches and holds target pressure efficiently for improved performance across the powerband.

• Direct-fit replacement for the factory internal wastegate actuator
• Single port design for accurate and reliable boost regulation
• Sturdier construction prevents premature wastegate opening under high load
• Specifically designed for 1993-1998 S14 and 1999-2002 S15 chassis
• Manufacturer Part Number: 1430-RN005

Fits 1989-1998 Nissan Silvia S13 and 180SX (R)PS13 models.

The HKS Upgraded Adjustable Wastegate Actuator Kit is a direct-fit solution for drivers looking to stabilize and maintain boost pressure on factory turbochargers. Over time, original equipment actuators often suffer from weak internal springs that result in boost taper at higher RPMs. This HKS unit (MPN 1430-RN004) features a reinforced spring and a larger diaphragm area to prevent premature gate opening and ensure the wastegate remains closed until your target boost is reached.

Designed for straightforward installation, this kit includes a turnbuckle-style adjustable rod, allowing you to fine-tune your base boost level without removing the actuator from the vehicle. It is an essential upgrade for tuned SR20DET engines where consistent boost control is critical for engine safety and power delivery.

• Direct bolt-on replacement for factory actuators on (R)PS13 chassis
• Adjustable rod design allows for precise base boost pressure tuning
• Eliminates boost taper and improves mid-to-high range response
• High-temperature resistant diaphragm for long-term durability under high load
• Manufacturer Part Number: 1430-RN004

The HKS Gold SSQV Insert (Fin Type) allows for precise customization of the signature discharge sound produced by your HKS Super Sequential Blow Off Valve. This gold-finished component is a direct replacement for the standard triple-fin insert, engineered to modify the frequency and tone of compressed air release for a unique acoustic profile.

Constructed to the exact tolerances required by the SSQV series, this insert is both an aesthetic engine bay upgrade and a functional tuning part. It easily swaps into the front of the valve housing, allowing owners to differentiate their vehicle's sound without affecting the blow-off valve's primary relief functions.

• Finish: Gold
• Design: Triple-Fin Type
• Application: Tuning accessory for HKS Super Sequential Blow Off Valves (SSQV)
• Function: High-frequency sound modification
• Manufacturer Part Number: 1422-SA002

Customize the discharge tone of your HKS Super Sequential Blow Off Valve with the HKS Purple SSQV Round Insert (MPN: 1422-SA001). This genuine HKS accessory is designed to replace the standard triple-fin insert, allowing you to alter the high-frequency sound produced during pressure discharge.

Constructed for a precise fit within the SSQV housing, this round insert modifies the airflow path to create a distinct audible profile. It is a simple, bolt-in component for enthusiasts looking to personalize the bypass sound of their turbocharged induction system without affecting valve performance or reliability.

• Genuine HKS accessory
• Alters SSQV discharge sound frequency
• Design: Round port
• Color: Purple
• Manufacturer Part Number: 1422-SA001
• Compatible with HKS Super Sequential Blow Off Valve (SSQV) series

The HKS Stainless Steel Exhaust Manifold for the STI is engineered to optimize exhaust gas flow and improve turbocharger response. By replacing the restrictive factory unit with this high-quality stainless steel header, you reduce backpressure and enhance the overall performance and sound of the engine.

• Manufactured from durable, heat-resistant stainless steel for long-term reliability
• Designed with optimized piping diameters to maximize exhaust gas velocity
• Direct replacement for the factory manifold to ensure proper fitment
• Helps reduce turbo lag by improving flow to the turbine housing
• Manufacturer Part Number: 1419-RF001

Maintain the precision response of your HKS Super Sequential Blow Off Valve (SSQV) with the HKS SQV Replacement Air Filter (MPN 1410-SA008). This specialized foam element is a critical component for the vacuum signal line, designed to prevent dust, oil vapors, and other contaminants from entering the valve's internal diaphragm and piston housing.

Over time, exposure to engine bay heat and blow-by can degrade the original filter, leading to potential leaks or sluggish valve operation. Replacing a clogged or worn filter ensures that your SSQV receives a clean, unobstructed pressure signal for reliable venting under boost. This is a genuine HKS replacement part, engineered to the exact tolerances of the SQV series.

• Manufacturer Part Number: 1410-SA008
• Compatibility: Fits all generations of HKS SQV and Super SQV (SSQV) blow-off valves
• Primary Function: Filters vacuum/pressure lines to protect internal valve components
• Construction: High-porosity filtration foam for minimal signal restriction
• Direct Replacement: Fits into the factory inline filter housing

The HKS F-Delivery Kit provides the consistent, high-volume fuel flow necessary for high-performance Nissan GT-R (R35) builds. Engineered to replace the restrictive factory fuel rail system, this kit features an 11.0mm injector port diameter, making it compatible with a wide range of high-flow aftermarket top-feed injectors.

By increasing the internal volume of the fuel rail, the HKS F-Delivery Kit stabilizes fuel pressure and ensures even distribution to every cylinder, preventing dangerous lean conditions under high-boost or high-RPM scenarios. This is a critical upgrade for any VR38DETT engine pushed beyond stock power levels during tuning or turbocharger upgrades.

• Vehicle Fitment: Nissan GT-R (R35)
• Injector Bore Size: 11.0mm
• Manufacturer Part Number: 1407-RN003
• High-capacity fuel rail design for stable pressure delivery
• Precision-machined ports for reliable sealing with top-feed injectors
• Essential for supporting increased fuel demands in high-horsepower applications

Engineered for high-performance builds, the HKS Turbo Setup Kit (14020-AN013) provides the essential plumbing and mounting components required to install the HKS GTIII-4R turbocharger onto a Nissan RB26DETT engine. This kit eliminates the guesswork of custom fabrication, ensuring that the large-frame GTIII-4R is properly positioned for optimal exhaust flow and engine bay clearance.

Constructed to withstand the extreme thermal stress of high-boost applications, this setup kit includes the necessary hardware to bridge the gap between your engine and the turbocharger system. Whether you are building a dedicated track car or a high-power street machine, HKS components provide the precision fitment and durability needed to maintain peak performance under load.

• Designed specifically for HKS GTIII-4R turbocharger integration
• Compatible with Nissan RB26DETT engines
• Includes high-quality gaskets and installation hardware
• Optimized for maximum exhaust flow and thermal efficiency
• Manufacturer Part Number: 14020-AN013

Optimized for the Subaru EJ25 engine, the HKS Turbo Exhaust Manifold is engineered to improve exhaust gas flow and reduce backpressure for better turbocharger response. Constructed from SUH 409 stainless steel, this manifold is designed to withstand the intense thermal cycling and high temperatures found in forced induction applications while maintaining long-term structural integrity.

This HKS manifold replaces the restrictive factory unit, utilizing smooth mandrel bends and optimized piping diameters to ensure exhaust pulses reach the turbocharger efficiently. The use of SUH 409 material provides an excellent balance of heat resistance and durability, making it a reliable choice for performance-oriented EJ25 builds.

• Engine Compatibility: Subaru EJ25 Series
• Material: SUH 409 Stainless Steel
• Application: Turbocharged Exhaust Manifold
• Manufacturer Part Number: 14019-AF002

The HKS Exhaust Joint Pipe is engineered to reduce backpressure and improve exhaust flow by replacing the restrictive factory overpipe. Designed specifically for the Toyota 86 and Subaru BRZ platform, this component eliminates the narrow, crushed sections found in the original equipment (OE) piping that often limit performance on tuned or forced-induction engines.

This joint pipe is constructed from high-grade, mandrel-bent stainless steel to ensure a consistent 60mm internal diameter. It features precision-machined flanges for a leak-free seal and bolts directly to factory mounting locations without the need for modification.

• Manufacturer Part Number: 14011-AT001
• Material: High-quality stainless steel
• Piping Diameter: 60mm
• Installation: Direct bolt-on to OE mounting points
• Fits: Toyota 86 and Subaru BRZ

Fits 1989-1994 Nissan Skyline GT-R (BNR32).

The HKS Intercooler Piping Kit (MPN: 1302-SN001) is a direct-replacement upgrade designed to eliminate the common failures associated with the factory rubber hoses on the BNR32 Skyline GT-R. Factory rubber hoses are prone to expanding under high boost or cracking over time due to heat cycles, leading to boost leaks and inconsistent engine performance. This HKS kit replaces those soft components with mandrel-bent aluminum piping that maintains its shape under pressure for consistent airflow and improved throttle response.

This kit is engineered to provide a rigid, reliable path for charged air from the turbos to the intercooler and into the intake plenum. It is compatible with both the factory intercooler and HKS intercooler upgrades, making it a versatile choice for both stock and modified RB26DETT setups.

• Direct replacement for failure-prone factory rubber intercooler hoses
• Mandrel-bent aluminum piping construction for smooth internal airflow
• Resists expansion under high-boost conditions for better throttle response
• Includes high-grade silicone couplers and heavy-duty hose clamps
• Fits with OEM or HKS intercooler units
• Manufacturer Part Number: 1302-SN001

Fits 1995-2002 Nissan Skyline GT-R (BCNR33 and BNR34).

Replace restrictive factory rubber components with the HKS Intercooler Piping Kit to ensure consistent boost pressure and improved throttle response. Under high-boost conditions, standard rubber hoses are prone to expansion or collapse; this kit replaces those failure points with mandrel-bent, buffed aluminum piping that maintains its shape and internal volume regardless of pressure.

The polished "buff" finish provides a high-end look for the RB26DETT engine bay while offering superior durability and heat dissipation compared to OE plastic and rubber. This kit is designed for a precise fit, utilizing factory routing to simplify the installation process.

• Replaces soft factory rubber hoses with rigid aluminum piping
• Mandrel-bent construction for optimized airflow and reduced turbulence
• Buffed/polished aluminum finish for corrosion resistance and aesthetics
• Includes high-quality silicone couplers and heavy-duty hose clamps
• Manufacturer Part Number: 13002-AN001

Designed for the Honda Civic Type R (FK8), the HKS I/C Piping Kit replaces the factory intercooler plumbing to ensure consistent airflow and structural integrity under boost. This kit is engineered to provide a more durable solution than the original equipment, preventing the expansion or collapse of flexible factory components during high-performance driving.

• Specific fitment for the Honda Civic Type R FK8 chassis
• Designed to maintain stable boost pressure and airflow
• Complete kit includes necessary piping and hardware for installation
• Manufacturer Part Number: 13002-AH001

Fits 1989-2002 Nissan Skyline GT-R R32, R33, and R34 (RB26DETT).

The HKS R-Type Intercooler is engineered for high-performance RB26DETT builds requiring maximum thermal efficiency and minimal pressure loss. This 700mm wide core (W700) is a staple for GT-R enthusiasts looking to support significant power increases over the factory cooling capacity. By utilizing a specialized tube and fin design, the R-Type core balances weight with superior heat dissipation, making it ideal for high-horsepower circuit and street applications.

• Manufacturer Part Number: 13001-AN008
• Core Type: R-Type
• Core Width: 700mm (W700)
• Application: BNR32, BCNR33, and BNR34 chassis
• Engine: RB26DETT

Fits 1989-2002 Nissan Skyline GT-R (BNR32, BCNR33, and BNR34) equipped with the RB26DETT engine.

The HKS R-Type Intercooler is the premier cooling solution for high-horsepower RB26DETT builds where managing intake air temperatures (IATs) is critical to engine safety and performance. This W600 (600mm width) R-Type core is engineered to provide maximum thermal transfer with minimal pressure drop, making it ideal for high-boost applications that exceed the cooling capacity of the factory unit.

• Series: R-Type (Flagship High-Performance Core)
• Core Width: 600mm
• Application: Front Mount Intercooler (FMIC)
• Engine: RB26DETT
• Manufacturer Part Number: 13001-AN007

By utilizing an optimized internal fin design, HKS ensures that the R-Type core maintains consistent cooling even under sustained high-load conditions, such as circuit racing or heavy spirited driving. This kit is a direct upgrade for Skyline GT-R owners looking to maximize the efficiency of their forced induction system.

Fits 2017-2021 Honda Civic Type R FK8 (K20C).

Designed to combat heat soak and maintain consistent intake air temperatures, the HKS Intercooler Kit provides a significant thermal management upgrade for the K20C engine. This kit features a larger-capacity core designed to replace the restrictive factory unit, offering improved airflow and heat dissipation for modified or track-driven vehicles. By utilizing the factory mounting locations, this core-only kit is ideal for owners who have already upgraded their charge pipes or wish to use custom piping solutions.

• Manufacturer Part Number: 13001-AH005
• Large-capacity core for superior cooling efficiency compared to OEM
• Direct bolt-on fitment using existing factory mounting points
• Optimized internal fin design to minimize pressure drop
• Includes intercooler core and necessary hardware
• Note: This kit does not include intercooler piping

Fits 2017-2021 Honda Civic Type R (FK8) equipped with the K20C1 2.0L Turbo engine.

The HKS R-Type Intercooler Kit (13001-AH004) is a high-performance cooling upgrade engineered to combat heat soak and reduce intake air temperatures on the FK8 platform. Designed for modified vehicles and track-oriented setups, this kit replaces the restrictive factory unit with a larger, more efficient aluminum core that maintains cooling capacity under high boost conditions.

• High-Efficiency Core: Optimized R-Type design for maximum heat dissipation and minimal pressure drop.
• Durability: Lightweight aluminum construction with precision-welded end tanks for high-boost reliability.
• Application Specific: Engineered specifically for the Honda Civic Type R (FK8) chassis to ensure proper airflow through the front fascia.
• Complete Setup: Part of the HKS "Full" kit lineup to provide a comprehensive solution for K20C cooling requirements.
• Part Number: 13001-AH004

This genuine HKS 8-Rib 100mm pulley is engineered for high-performance drive systems where belt grip and rotational precision are critical. Designed to integrate with HKS supercharger kits or custom accessory drives, the 8-rib configuration provides significant surface area to maximize contact and prevent belt slippage under high-load or high-RPM conditions.

• Manufacturer Part Number: 12999-AK005
• Pulley Diameter: 100mm
• Rib Count: 8-Rib
• Precision-machined for optimal balance and reduced vibration
• Engineered to withstand extreme belt tension and heat

This HKS drive pulley is engineered for high-performance forced induction systems and accessory drives requiring an 8-rib belt configuration. With a precision-machined 80mm diameter, this pulley provides the specific surface area and rotational ratio needed to manage drive speeds and belt tension in demanding engine environments.

• Diameter: 80mm
• Belt Profile: 8-Rib
• Material: High-strength alloy construction for minimal flex and maximum durability under load
• Precision Machined: Ensures exact belt alignment to prevent premature wear or slipping
• Part Number: 12999-AK001

Whether you are replacing a worn component or adjusting the drive ratio for specific boost requirements, this HKS pulley offers the tight tolerances and reliability expected from a leader in Japanese performance engineering. Designed for use with HKS supercharger systems and custom 8-rib drive setups.

Maintain the longevity and efficiency of your centrifugal forced induction system with the HKS GT Supercharger Oil Filter. This specialized filter is designed specifically for the traction fluid circuit, ensuring that the oil remains free of particulates and contaminants that can compromise the high-precision internal components of the supercharger unit.

Regular replacement of this filter is a vital part of the HKS GT Supercharger maintenance schedule. By capturing wear particles, it protects the traction drive surfaces and ensures consistent boost performance across the powerband. As a genuine HKS component, it is manufactured to the strict tolerances required for high-RPM supercharger operation.

• Specifically engineered for HKS GT Supercharger traction oil systems
• High-efficiency filtration to protect internal traction drive components
• Critical maintenance item for system longevity and reliability
• Direct replacement for the original kit-supplied filter
• Manufacturer Part Number: 12002-AK015

Fits 2016-2018 Mazda MX-5 (SKYACTIV-G 2.0L).

The HKS GT2 S/C System Pro is a high-efficiency centrifugal supercharger kit engineered specifically for the ND1 chassis MX-5. By utilizing a GT2 series blower, this system provides linear power delivery that mimics the feel of a larger displacement engine while maintaining the high-revving character of the SKYACTIV-G 2.0L. As a "Pro" series kit, this package provides the essential forced induction hardware, allowing builders to select their own engine management and fueling solutions for a customized performance profile.

• High-efficiency HKS GT2 centrifugal supercharger unit
• Precision-machined mounting brackets and robust drive belt assembly
• Intercooler and mandrel-bent aluminum piping for reduced intake air temperatures
• Designed to retain factory engine bay reliability while significantly increasing output
• Manufacturer Part Number: 12001-KZ001

Note: This is a "Pro" kit which requires separate engine management or custom ECU tuning for operation.

Fits 2013-2016 Scion FR-S, Subaru BRZ, and Toyota 86.

The HKS GT2 Supercharger System (12001-KT004A) provides a significant power and torque increase for the FA20 engine by utilizing a high-efficiency centrifugal supercharger. This comprehensive kit features the GT2-7040L blower, engineered to deliver linear power across the entire RPM range, providing the feel of a larger displacement engine without the lag associated with turbocharging.

This specific "ECU Package" version includes the HKS Flash Editor, pre-loaded with optimized data to recalibrate your fueling and ignition timing for the forced induction system. The hardware is designed for a precise fit within the factory engine bay, utilizing high-quality brackets and an efficient intercooler setup to manage intake charge temperatures during spirited driving or track use.

• HKS GT2-7040L Centrifugal Supercharger unit
• HKS Flash Editor included with vehicle-specific tuning data
• Front-mount intercooler (FMIC) with mandrel-bent aluminum piping
• Robust CNC-machined mounting brackets and high-strength drive belt
• Complete installation hardware and comprehensive instructions
• Manufacturer Part Number: 12001-KT004A

Fits 2013-2020 Scion FR-S, Toyota 86, and Subaru BRZ (FA20).

The HKS GT2 Supercharger System Pro (MPN 12001-KT004) provides a significant performance upgrade for the ZN6/ZC6 platform by utilizing a high-efficiency centrifugal blower. Designed to deliver a linear power curve that complements the high-revving nature of the FA20 engine, this system avoids the sudden torque spikes of traditional turbochargers while providing substantial gains across the entire powerband. The GT2-7040L unit features HKS's signature traction drive technology, which ensures quiet operation and increased efficiency over conventional gear-driven superchargers.

As a "Pro" series kit, this package serves as a comprehensive mechanical foundation for forced induction, allowing tuners the flexibility to select their own fuel management and calibration solutions. Every component is engineered for precise fitment and long-term durability under spirited driving conditions.

• Manufacturer Part Number: 12001-KT004
• Supercharger Unit: HKS GT2-7040L centrifugal blower
• Cooling: Front-mount intercooler with dedicated aluminum piping
• Installation: Bolt-on mounting brackets and drive belt included
• Hardware: Complete set of brackets, hoses, and clamps for a clean install
• Note: Requires custom tuning and fuel management (not included in Pro kits)

Fits 2022-2024 Toyota GR86 (ZN8) equipped with the 2.4L FA24 engine.

The HKS GT2 Supercharger Pro Kit STEP0 is engineered to provide a significant increase in power and torque while maintaining the linear, high-revving character of the FA24 engine. By utilizing a centrifugal supercharger design, HKS delivers smooth boost delivery that scales with RPM, avoiding the sudden surges often found in turbocharged applications. This kit is a foundational forced induction solution for the ZN8 chassis, focusing on efficiency and thermal management.

As a Pro Kit, this package includes the core supercharger unit and essential mounting hardware, providing a robust base for tuners to customize fuel management and software to meet specific performance targets.

• GT2 centrifugal supercharger unit for high-efficiency boost
• Precision-machined mounting brackets for secure engine bay integration
• Direct fitment for the FA24 2.4L flat-four engine
• STEP0 configuration allows for custom tuning and support modifications
• Includes all necessary installation hardware and brackets
• Manufacturer Part Number: 12001-AT013

The HKS GT S/C System Pro Ver2 is a high-performance centrifugal supercharger kit engineered specifically for the Z33 chassis equipped with the VQ35DE engine. This Pro kit focuses on the core forced induction hardware, providing a robust platform for enthusiasts and tuners to build a custom-tuned power plant with linear delivery and high thermal efficiency.

• Manufacturer Part Number: 12001-AN008
• System Type: Centrifugal Supercharger
• Fitment: Z33 with VQ35DE engine
• Series: GT Supercharger System Pro Ver2

By utilizing a centrifugal blower design, HKS ensures a consistent increase in torque across the RPM range. As a Pro-series kit, it includes the supercharger unit, heavy-duty mounting brackets, and specific plumbing, allowing the builder to select the appropriate fuel management and tuning components for their unique performance goals.

Fits 2000-2009 Honda S2000 AP1 and AP2 (JDM and USDM models).

The HKS GT2 Supercharger System Pro provides a high-efficiency forced induction foundation for the Honda S2000. Centered around the GT2-7040 centrifugal supercharger unit, this system is engineered to deliver linear power that complements the high-revving nature of the F-Series engine. Unlike turbochargers, this supercharger offers immediate throttle response and a torque curve that pulls consistently to the redline.

The "Pro" designation indicates this kit includes the core mechanical hardware—including the blower, intercooler, and mounting brackets—while allowing tuners the flexibility to select their own engine management and fueling solutions for a bespoke build. Every component is designed to bolt directly to the chassis, maintaining a clean engine bay layout while significantly increasing CFM capacity.

• GT2-7040 Centrifugal Supercharger Unit
• Front-mount intercooler and aluminum piping
• Precision-machined mounting brackets and pulleys
• Compatible with both JDM and USDM Honda S2000 models
• Manufacturer Part Number: 12001-AH010

Fits 1987-1992 Toyota Supra MK3.

This HKS Bead Type Head Gasket is engineered to provide superior sealing performance for the Toyota Supra MK3 platform. Designed to withstand the high cylinder pressures associated with performance tuning and increased boost levels, this 1.2mm gasket replaces the factory unit to prevent head gasket failure and ensure long-term engine reliability.

Constructed with a multi-layer steel design, the bead-type structure provides a concentrated sealing force around the combustion chamber. This specific architecture is essential for maintaining a combustion seal under high thermal and mechanical stress, protecting your engine during spirited driving or track use.

• Manufacturer Part Number: 11116-153195
• Thickness: 1.2mm
• Type: Bead Type construction
• Material: Multi-layer steel (MLS)
• Direct fit for 1987-1992 Toyota Supra (A70/MK3)

The HKS GTIII-RS Sports Turbine Kit (11004-AN017) is a high-performance turbocharger upgrade designed specifically for the RB25 engine. By combining advanced aerodynamics with HKS-engineered housings and a modern center cartridge, this kit delivers a significant increase in power potential without sacrificing the low-end response required for street and circuit driving.

• Engineered as a high-efficiency replacement for the factory RB25 turbine assembly
• GTIII-RS series optimizes compressor and turbine wheel design for maximum flow
• Precision-machined housings ensure optimal thermal management and durability
• Includes necessary installation hardware and gaskets for a professional fit
• Manufacturer Part Number: 11004-AN017

Upgrade your RB26 powerplant with the HKS GTIII 2530 Sports Turbine Kit, a precision-engineered twin-turbo system designed for modern performance and throttle response. This kit utilizes high-efficiency center housing rotating assemblies (CHRA) and advanced compressor wheel aerodynamics to provide a significant increase in airflow capacity over factory units while maintaining a broad powerband.

• Manufacturer Part Number: 11004-AN014
• Modernized GTIII 2530 compressor and turbine wheel profiles
• Reinforced actuators for precise and stable boost control
• Direct bolt-on compatibility for RB26 engine platforms
• Complete kit includes gaskets, oil lines, and installation hardware

Fits 1989-2002 Nissan Skyline GT-R R32, R33, and R34 models equipped with the RB26DETT engine.

The HKS GTIII-SS Sports Turbine Kit (11004-AN011) is a precision-engineered twin-turbo upgrade designed for owners seeking a significant increase in power without sacrificing the legendary throttle response of the RB26 platform. Developed in collaboration with Mitsubishi Heavy Industries (MHI), these turbos utilize a high-efficiency CHRA and modern blade geometry to minimize lag while providing enough flow for high-output builds.

• Direct Bolt-On Fitment: Designed to mount to the factory exhaust manifolds and integrate with standard intake/exhaust plumbing for a clean installation.
• Advanced Turbine Design: Features optimized compressor and turbine wheels that improve spool-up characteristics over the original units.
• Reinforced Control: Includes upgraded HKS actuators to ensure stable boost pressure and prevent wastegate creep under high load.
• Comprehensive Kit: Packaged with essential gaskets, oil lines, and coolant lines required to replace the stock T25-style turbochargers.
• Manufacturer Part Number: 11004-AN011