Turbosmart Uniglide Multi Spray is a specialized synthetic lubricant engineered specifically for the service and maintenance of high-performance blow-off valves. This 50ml formula provides a high-temperature, low-friction coating that ensures the BOV piston moves freely within its bore, preventing the sticking or sluggish response that often causes atmospheric stalling or compressor surge.

Regular maintenance with Uniglide helps preserve internal seals and ensures the valve responds instantly to manifold pressure changes. The lubricant is designed to withstand the harsh heat cycles found in turbocharged engine bays without breaking down or becoming gummy over time.

• Manufacturer: Turbosmart
• Product: Uniglide Multi Spray BOV Lubricant
• Volume: 50ml
• Application: Formulated for all Turbosmart blow-off valves and bypass valves
• Function: Reduces internal friction and prevents piston wear

Fits 2018-2023 Kia Stinger and 2018+ Genesis G70 (3.3L).

The Torque Solution TiAL Blow Off Valve (BOV) Adapter allows you to install a TiAL Q or QR series blow off valve onto your factory intercooler piping without the need for cutting or welding. This precision-engineered adapter replaces the restrictive factory bypass valves, providing the necessary flange for a high-performance atmospheric or recirculating TiAL valve setup.

• CNC machined 6061-T6 billet aluminum construction for maximum durability
• Hard anodized finish to resist corrosion and wear
• Direct fitment to factory mounting locations
• Designed specifically for TiAL flange patterns
• Includes O-ring and necessary installation hardware

Fits 2017-2021 Honda Civic Type R (FK8).

The HKS Super SQV Suction Return Kit allows the Super SQV blow-off valve to be configured for recirculation, directing discharged air back into the intake stream. This setup is critical for modern EFI systems like the Civic Type R's K20C1, as it ensures the MAF sensor maintains accurate air-mass readings, preventing the rich-stumble or stalling issues often associated with venting metered air to the atmosphere.

• Designed specifically for the Honda Civic Type R FK8 chassis
• Compatible with HKS Super SQV series blow-off valves
• Includes vehicle-specific molded return piping and necessary hardware
• Provides a clean, bolt-on installation to the factory intake suction pipe
• Maintains smooth idle and consistent drivability during gear shifts
• Manufacturer Part Number: 71002-AH003

Fits 2018-2019 Kia Stinger Base and Premium models (2.0T).

The Torque Solution HKS Blow Off Valve Adapter provides a precision-engineered solution for mounting an HKS blow-off valve to your vehicle's factory charge pipe. This adapter replaces the stock recirculating valve, allowing for a direct bolt-on installation that requires no welding, cutting, or permanent modifications to the factory intercooler piping.

• Designed for a direct fit onto factory mounting points
• Allows installation of HKS-style blow-off valves
• Streamlines the transition from factory bypass to aftermarket BOV
• Includes all necessary hardware for installation
• Manufacturer Part Number: TS-BOV-562-2.0T

The Torque Solution Billet Adapter Flange (TS-GRD-TIAL) provides a direct solution for mounting a Tial Blow-Off Valve onto an existing Greddy-style flange. This adapter eliminates the need for cutting or welding when switching between BOV brands, allowing for a straightforward hardware conversion on your intercooler piping or blow-off valve bung.

Precision CNC machined from high-grade billet aluminum, this adapter is designed to maintain a secure, leak-free seal even under high-boost applications. It is engineered for enthusiasts who require the flow characteristics of a Tial Q or QR valve while utilizing a mounting point originally designed for Greddy components.

• Directly converts Greddy-style mounting to Tial BOV flange
• CNC machined billet aluminum construction
• Replaces the need for custom fabrication or welding
• Manufacturer Part Number: TS-GRD-TIAL

The Torque Solution Billet Adapter Flange (TS-HKS-TIAL) provides a precise, bolt-on solution for enthusiasts looking to switch between blow-off valve platforms. This adapter allows you to mount a TiAL style blow-off valve directly onto intercooler piping already equipped with an HKS-style mounting flange.

• CNC machined from high-grade billet aluminum for strength and durability
• Allows for a TiAL BOV to be used on HKS-style flanged piping
• Eliminates the need for cutting or welding new flanges to your intercooler pipes
• Designed to maintain a leak-free seal under high boost conditions
• Manufacturer Part Number: TS-HKS-TIAL

Fits 2016+ Ford F-150 models equipped with the 2.7L or 3.5L EcoBoost engines.

The Torque Solution Blow Off Valve Adapter (TS-FRD-483.2) allows your EcoBoost F-150 to achieve the classic atmospheric vent-to-atmosphere (VTA) sound. This CNC-machined spacer installs directly between the factory electronic blow-off valve (eBOV) and the mounting flange on the intercooler. By venting the pressurized air to the atmosphere instead of recirculating it into the intake tract, it provides a crisp "whoosh" sound upon throttle lift-off without the need for a complex aftermarket valve replacement.

• Precision CNC-machined 6061-T6 billet aluminum
• Corrosion-resistant black anodized finish
• Simple bolt-on installation using factory mounting points
• Maintains factory ECU control over the eBOV
• Manufacturer Part Number: TS-FRD-483.2

Turbosmart spring clamps provide constant tension for a secure, leak-free seal on 6mm (0.24") silicone vacuum hoses. Engineered to handle the frequent thermal expansion and contraction cycles of a high-performance engine bay, these clamps ensure vacuum lines remain seated even under extreme temperatures and vibrations. The low-profile design allows for easy installation and maintenance in confined spaces where traditional worm-gear clamps may be too bulky.

• Inner Diameter: 6mm (0.24")
• Compatibility: Optimized for Turbosmart silicone vacuum hoses
• Material: High-strength spring steel with corrosion-resistant finish
• Application: Vacuum lines, boost reference lines, and breather hoses
• Manufacturer Part Number: TS-HCS-006

Turbosmart spring clamps provide constant-tension fastening for silicone vacuum hoses, ensuring a secure, leak-free seal. Unlike plastic zip ties, these spring steel clamps maintain consistent pressure throughout thermal expansion and contraction cycles, making them essential for boost controllers, wastegates, and custom vacuum routing.

• Inner Diameter: 5mm (0.20")
• Material: Corrosion-resistant spring steel construction
• Design: Constant-tension mechanism for long-term reliability
• Compatibility: Sized specifically for Turbosmart silicone vacuum hoses
• Installation: Low-profile design for use in confined engine bay spaces
• Manufacturer Part Number: TS-HCS-005

Secure your vacuum system with Turbosmart constant-tension spring clamps, designed specifically for 3mm (0.12") silicone vacuum hoses. These clamps provide a reliable, uniform seal that prevents leaks at critical connection points, ensuring stable boost references and consistent engine performance. Unlike standard zip ties, these spring clamps maintain pressure through extreme thermal expansion and contraction cycles common in high-performance engine bays.

Constructed for durability and superior corrosion resistance, these fasteners are engineered to withstand the rigors of custom turbocharger installations and high-heat environments. Their compact profile allows for easy installation in confined spaces where traditional worm-gear clamps cannot fit. Whether you are replacing worn factory clips or plumbing a new vacuum manifold, these clamps provide a professional, secure finish.

• Inner Diameter: 3mm (0.12")
• Application: Ideal for silicone vacuum hoses and small diameter lines
• Constant-tension design for 360-degree sealing
• High-grade materials for maximum durability and corrosion resistance
• Quantity: Pack of 10
• Manufacturer Part Number: TS-HCS-003

Fine-tune your turbocharger's boost threshold with the Turbosmart TS-0505-2006 wastegate spring. This 7 PSI outer spring is specifically engineered for use with Turbosmart WG38, WG40, and WG45 external wastegates, including the Ultra-Gate38, Comp-Gate40, and Hyper-Gate45 series.

Constructed from high-tensile spring steel, this component is designed to maintain consistent seat pressure and resist fatigue even under the extreme thermal loads found in the exhaust path. Because boost control is critical to engine safety, Turbosmart springs are manufactured to tight tolerances to ensure your wastegate opens at the designated pressure. This spring can be used individually or combined with other inner springs to achieve your specific target base boost level.

• Manufacturer Part Number: TS-0505-2006
• Pressure Rating: 7 PSI
• Spring Position: Outer
• Color Identification: Brown/Pink
• Compatibility: Turbosmart WG38, WG40, and WG45 External Wastegates

The Turbosmart TS-0505-2005 is a precision-engineered 10 PSI outer spring designed specifically for the Comp-Gate40 (WG40) external wastegate. This spring allows you to set or adjust your base boost pressure, ensuring accurate wastegate operation and consistent manifold pressure during high-performance use.

Constructed from high-grade materials, this spring is built to withstand extreme thermal stress and resist fatigue, maintaining its rated tension even under the harsh conditions of a turbocharged engine bay. The brown and blue color coding allows for easy identification when configuring your wastegate for specific boost targets. It can be used individually or combined with other internal springs to achieve the exact pressure required for your tuning setup.

• Manufacturer Part Number: TS-0505-2005
• Compatibility: Turbosmart Comp-Gate40 (WG40) External Wastegates
• Spring Rate: 10 PSI (0.689 bar)
• Position: Outer
• Color Code: Brown/Blue

Calibrate your boost levels precisely with the Turbosmart WG40 middle wastegate spring. This 11 PSI (0.76 bar) spring is engineered for use within the Turbosmart Comp-Gate40 external wastegate series, allowing you to set a baseline boost pressure or combine it with other springs to achieve your target manifold pressure.

Manufactured from high-grade stainless steel, this spring is designed to withstand the extreme thermal cycles common in exhaust-mounted components without losing tension or fatigue. The Brown/Red color coding ensures easy identification during assembly or when servicing your wastegate to ensure you have the correct spring rate installed.

• Manufacturer Part Number: TS-0505-2004
• Series: Comp-Gate40 (WG40)
• Spring Type: Middle
• Pressure Rating: 11 PSI (0.76 bar)
• Color Coding: Brown and Red
• Material: High-temperature resistant stainless steel

Fine-tune your boost control with the Turbosmart TS-0505-2003 middle spring, specifically engineered for the WG40 Comp-Gate40 external wastegate. This 7 PSI spring allows you to set your base mechanical boost pressure accurately, providing the foundation for your boost management system. Whether you are replacing a worn spring or re-tuning for a new setup, this component ensures your wastegate operates with the precision required in high-performance turbocharged applications.

• Manufacturer Part Number: TS-0505-2003
• Pressure Rating: 7 PSI (0.48 bar)
• Spring Type: Middle
• Color Code: Brown/Purple
• Compatibility: Designed for Turbosmart Comp-Gate40 (40mm) external wastegates
• Material: High-grade stainless steel construction for heat resistance and fatigue prevention

Proper spring selection is critical for achieving your target boost curve. This spring can be used individually or stacked with other Turbosmart WG40 springs to reach higher pressures. Always verify your wastegate model before installation to ensure correct fitment and valve travel.

Fine-tune your turbocharger's boost curve with the Turbosmart Comp-Gate40 (WG40) 5 PSI Inner Wastegate Spring. Designed specifically for the Comp-Gate40 external wastegate series, this inner spring allows you to establish a precise base boost pressure. It can be used individually or combined with other Turbosmart springs to achieve your specific manifold pressure targets. Manufactured from high-grade stainless steel, this spring is engineered to maintain its rate and resist fatigue even under the extreme thermal loads found in exhaust environments.

• Manufacturer Part Number: TS-0505-2002
• Pressure Rating: 5 PSI (0.34 bar)
• Spring Configuration: Inner
• Color Code: Brown/Grey
• Compatibility: Fits Turbosmart Comp-Gate40 (WG40) External Wastegates
• Material: High-temperature resistant stainless steel

Correct spring selection is vital for preventing gate creep and ensuring stable boost delivery. This color-coded spring ensures easy identification during assembly or tuning and provides a reliable mechanical baseline for your electronic or manual boost controller.

Fine-tune your turbocharger's boost curve with the Turbosmart WG40 3 PSI inner wastegate spring. Designed specifically for the Comps-Gate40 40mm external wastegate series, this precision-engineered spring allows for accurate boost control by providing a consistent 3 PSI base pressure rating. Whether you are replacing a worn component or stacking springs to reach a specific target pressure, this inner spring ensures reliable performance under high thermal stress and repeated cycling.

• Pressure Rating: 3 PSI (0.21 bar)
• Spring Type: Inner
• Identification Color: Brown/Black
• Compatibility: WG40 (Comps-Gate40) 40mm Wastegates
• Manufacturer Part Number: TS-0505-2001

Manufactured in Australia from high-grade steel, Turbosmart wastegate springs are rigorously tested to maintain their calibrated spring rate even in the extreme heat of the exhaust manifold. This component can be used as a standalone spring or combined with other WG40 springs to achieve a higher total boost threshold.

Restore airtight performance and prevent pressure loss with the Turbosmart Kompact EM Series O-Ring Kit. This essential maintenance package is designed to replace worn or damaged seals within the Kompact EM blow-off valve assembly, ensuring a reliable seal against boost pressure and heat.

As these valves are often subjected to high-temperature environments and constant cycling, O-rings can eventually flatten or degrade, leading to potential boost leaks. This kit provides precision-molded replacements to maintain the response and reliability of your Turbosmart hardware.

• Precision Sealing: High-quality O-rings designed specifically for the Kompact EM internal tolerances.
• Complete Coverage: Specifically fits Kompact EM models VR1, VR3, VR7, VR9, VR11, VR13, VR15, VR16, and VR23.
• Prevent Boost Leaks: Ensures the valve remains fully sealed under high-pressure conditions.
• Manufacturer Part Number: TS-0223-3010

The Torque Solution HKS 1.25in Clamp on Adapter (TS-UNI-024) provides a reliable mounting solution for integrating an HKS Super Sequential Blow Off Valve into your custom forced induction system. This universal adapter allows for a direct installation onto any 1.25-inch intercooler pipe or silicone coupler using a standard hose clamp, eliminating the need for complex welding during the mockup or installation process.

• Precision machined for HKS SSQV / Super Sequential mounting patterns
• 1.25-inch (31.75mm) outer diameter for clamp-on hose or pipe fitment
• Ideal for custom turbocharger and supercharger plumbing
• Universal application for versatile engine bay configurations
• Manufacturer Part Number: TS-UNI-024

The Torque Solution Tial Blow Off Valve 1.0in Modular Clamp-on Adapter provides a precise, reliable mounting solution for integrating a Tial BOV into your forced induction system. This adapter is specifically engineered to interface with 1.0-inch (1.0in) diameter piping or hoses, ensuring a secure fitment that maintains seal integrity under boost.

The modular clamp-on design allows for a straightforward installation process, making it an ideal choice for custom turbo or supercharger setups where universal compatibility is required. By utilizing a modular interface, this adapter simplifies maintenance and system reconfigurations without the need for permanent modifications to your charge piping.

• Compatible with Tial Blow Off Valves
• 1.0-inch (1.0in) modular connection diameter
• Clamp-on style for easy installation and removal
• Designed for universal forced induction applications
• Manufacturer Part Number: TS-TIAL-100

Fits 2002-2014 Subaru Impreza WRX and WRX STI (including Limited, Special Edition, and TR models).

The Torque Solution Tial Blow Off Valve Adapter is designed to allow the installation of a Tial-style BOV directly onto your factory intercooler mounting flange without the need for welding or permanent modification. This precision-machined adapter provides a secure, leak-free seat for your valve, making it an essential upgrade for Subaru owners looking to improve boost response and reliability. The kit includes a dedicated plug to cap the intake recirculation/return hose, facilitating a proper vent-to-atmosphere setup.

• Direct bolt-on fitment for the factory intercooler flange
• Allows for the installation of Tial Blow Off Valves
• Includes intake return block-off plug
• Simple installation using existing mounting points
• Manufacturer Part Number: TS-SU-TIALC

Maintain the rapid response and reliable boost control of your Turbosmart blow-off valve with this genuine High-Speed Bullet Solenoid Replacement. Specifically engineered for the multi-award-winning Kompact EM range, this solenoid is a direct-fit replacement for the VR3, VR5, and VR12 variants. It is compatible with Plumb Back (Recirculating), Dual Port, and Supersonic (Vent to Atmosphere) configurations.

Designed for easy installation, this replacement solenoid restores the electronic integration that makes the EM series so effective. It comes fully assembled with the necessary wiring loom and a connector that matches your OE harness, ensuring a secure, plug-and-play connection without the need for splicing.

• Compatible with Turbosmart Kompact EM VR3, VR5, and VR12 valves
• Suitable for Plumb Back, Dual Port, and Supersonic models
• High-speed bullet design for precision boost management
• Direct replacement for worn or damaged EM solenoids
• Includes integrated wiring loom and OE-style connector
• Manufacturer Part Number: TS-0223-3003

Ensure your boost control system maintains peak response with this Turbosmart High-Speed Proprietary Solenoid Replacement. This component is a direct service part designed for the Kompact EM range of blow-off valves, providing the fast-acting performance required for modern electronic boost management.

This solenoid is engineered for seamless integration with factory ECU controls, maintaining the rapid cycle speeds that the Kompact EM series is known for. It is a universal replacement for both Plumb Back and Dual Port configurations within the VR2, VR7, and VR11 series, ensuring your bypass valve operates with precision and reliability.

• Manufacturer Part Number: TS-0223-3002
• Product Compatibility: Turbosmart Kompact EM VR2, VR7, and VR11 series
• Valve Types: Fits both Plumb Back and Dual Port EM valves
• Operation: Proprietary high-speed solenoid design for rapid venting response
• Installation: Direct-fit replacement for the original solenoid hardware

Restore the lightning-fast response and precise electronic control of your blow-off valve with the Turbosmart Kompact EM Replacement Solenoid (TS-0223-3001). This genuine service part is engineered specifically to replace a worn or malfunctioning solenoid in the Kompact EM series, ensuring the factory ECU maintains direct command over the actuator for optimal boost management.

Constructed to handle the high thermal loads of a turbocharged engine bay, this solenoid provides a direct-fit solution that eliminates boost leaks or slow valve actuation caused by electrical failure. It is the critical component for maintaining the plug-and-play performance of your VR1 or VR4 valve setup.

• Compatibility: Specifically designed for Turbosmart Kompact EM VR1 and VR4 valves
• Function: Restores ECU-controlled actuation and boost response
• Fitment: Direct replacement for the original solenoid unit
• Durability: High-temperature internal components for reliable cycling
• Manufacturer Part Number: TS-0223-3001

Ensure a reliable, leak-free seal in your forced induction system with the Turbosmart BOV Greddy Adapter Gasket. This precision-cut gasket is engineered to provide a secure interface between a Turbosmart blow-off valve and a Greddy-style adapter flange. Proper sealing at this junction is critical for preventing boost leaks, which can lead to inconsistent manifold pressure and reduced turbocharger efficiency.

• Direct replacement gasket for Greddy-pattern BOV adapter flanges
• Engineered to withstand high-temperature and high-pressure environments
• Critical for maintaining airtight integrity in the intake tract
• Precision-cut for an exact fit and easy installation
• Manufacturer Part Number: TS-0205-3205

The Turbosmart -3AN Banjo Nipple (TS-0205-3111) is a precision-engineered replacement fitting designed to provide a secure, professional plumbing solution for your forced induction system. This nipple allows users to transition from standard slip-on vacuum hoses to robust -3AN braided lines, ensuring maximum connection reliability under high-boost conditions and engine vibration.

This low-profile banjo fitting is critical for tight engine bays where routing space is at a premium. It ensures a leak-free seal for boost reference signals, maintaining the response and accuracy of your blow-off valve or wastegate actuator.

• Fitting Size: -3AN Banjo
• Compatibility: Turbosmart Type 5 BOVs (Plumb Back, Dual Port, Vee Port Pro, and Supersonic), Kompact and Kompact Shortie series, and IWG75 Internal Wastegate Actuators
• Application: Ideal for converting boost lines to braided stainless steel plumbing
• Manufacturer Part Number: TS-0205-3111

This Turbosmart Vee-Port Pro Blow Off Valve Spring is engineered to help you fine-tune your BOV response to match your specific engine vacuum and driving requirements. Designed as a direct replacement or tuning component for the Vee-Port Pro series, this Grey spring ensures the valve operates at its peak performance under extreme boost and thermal conditions.

Constructed from high-grade materials to resist fatigue and maintain consistent spring rates over time, this component is critical for preventing boost leaks and ensuring crisp valve actuation. Using the correct spring rate allows for precise control over the valve's cracking pressure, protecting your turbocharger from compressor surge.

• Compatible with Turbosmart Vee-Port Pro blow-off valves
• High-quality construction for durability in high-heat engine bays
• Color-coded Grey for specific spring rate identification
• Ensures reliable blow-off valve operation and manifold pressure management
• Manufacturer Part Number: TS-0205-3110

Maintain an airtight seal in your forced induction system with the Turbosmart Nissan BOV Flange Gasket. Designed specifically for select Nissan performance applications, this replacement gasket (TS-0205-3109) prevents boost leaks between the blow-off valve and the intake plumbing, ensuring your turbocharger delivers consistent pressure without loss of power.

Fabricated from high-grade rubber, this gasket is engineered to withstand the extreme temperatures and vibrations common in high-performance engine bays. It offers a precise, direct-fit solution that requires no modifications to the factory mounting points or intake components, making it an essential service item when reinstalling or upgrading your BOV.

• Manufacturer Part Number: TS-0205-3109
• Material: High-durability rubber
• Application: Fits select Nissan blow-off valve mounting flanges
• Function: Seals BOV to intake hose to prevent boost pressure loss
• Installation: Drop-in replacement; no modifications required

Fits select 2002-2021 Subaru WRX, WRX STI, and Forester XT models.

The Turbosmart BOV Flange Gasket is engineered to provide a reliable, airtight seal between your blow-off valve and the intercooler or mounting flange. Over time, heat cycles and high boost pressure can cause gaskets to compress, become brittle, or fail entirely, leading to power-robbing vacuum leaks. This high-quality replacement gasket (MPN: TS-0205-3108) ensures your turbocharger system maintains peak efficiency and consistent boost pressure.

• Precision Engineering: Designed specifically to match the Subaru 2-bolt blow-off valve mounting pattern.
• Boost Leak Prevention: Restores the pressurized seal at the flange to eliminate intake leaks and improve throttle response.
• Durable Construction: Built to withstand the high temperatures and vibration common in turbocharged engine bays.
• Essential Maintenance: A critical replacement item whenever removing or installing a BOV or bypass valve.
• Manufacturer Part Number: TS-0205-3108

Authoritative Fitment List:

Fits select 2003-2021 Subaru Forester, Legacy, and WRX, Mazda 3, 6, and CX-7, and Nissan Juke.

Maintain consistent boost pressure and prevent performance-robbing leaks with the Turbosmart Type 5 BOV MAX/SUB Flange Gasket. This high-quality replacement gasket is engineered to withstand the extreme thermal cycles and high pressure found in turbocharged induction systems. It provides a reliable, airtight seal between the blow-off valve and the mounting flange, ensuring your turbocharger operates at peak efficiency.

• Designed for high-heat and high-pressure turbocharged environments
• Ensures a secure, leak-free connection for Type 5 BOV installations
• Direct replacement for worn or damaged flange gaskets
• Fits MAX/SUB flange configurations
• Manufacturer Part Number: TS-0205-3107

Fine-tune your blow off valve’s response with the Turbosmart Vee Port Pro BOV Replacement Spring. Engineered specifically for the Vee Port Pro series, this white-coded spring allows you to adjust the boost pressure threshold at which the valve opens, ensuring optimal turbocharger response and preventing compressor surge.

Constructed from high-grade materials to resist fatigue, this spring maintains consistent tension even under the high-temperature conditions of a performance engine bay. It is a direct fit component designed to help you match your blow off valve's operation to your specific engine vacuum levels and boost application.

• Specifically designed for Turbosmart Vee Port Pro Blow Off Valves
• Spring Color/Rate: White
• Ensures peak valve performance under extreme conditions
• Direct replacement for worn or incorrectly rated springs
• Manufacturer Part Number: TS-0205-3106