ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.

• 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
• One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• 6061 aluminum rod end, top cap, and internals ensure strength and durability
• 5/8” chrome plated hardened steel shaft resists corrosion and pits
• Nitrogen charged monotube design with internal reservoir3
• Nitrile rubber top out bumper for noise free operation
• 100% revalveable
• 100% rebuildable

This Part Fits:

ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.

• 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
• One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• 6061 aluminum rod end, top cap, and internals ensure strength and durability
• 5/8” chrome plated hardened steel shaft resists corrosion and pits
• Nitrogen charged monotube design with remote reservoir
• Nitrile rubber top out bumper for noise free operation
• Application-specific reservoir mounting hardware
• 100% revalveable
• 100% rebuildable

This Part Fits:

ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.

• 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
• One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• 6061 aluminum rod end, top cap, and internals ensure strength and durability
• 5/8” chrome plated hardened steel shaft resists corrosion and pits
• Nitrogen charged monotube design with internal reservoir3
• Nitrile rubber top out bumper for noise free operation
• 100% revalveable
• 100% rebuildable

This Part Fits:

The ICON Vehicle Dynamics U-Bolt Plate Kit is an essential component to install ICON 5” lift rear leaf springs onto 2011-2025 Ford F-250 and F-350 Super Duty trucks. These heavy-duty fabricated, CNC laser cut steel plates replace the OE U-Bolt plates and allow ICON U-Bolts to secure the new leaf springs to the rear axle. The plates look as good as they function with a dual stage, semi-gloss black power coat finish to prevent corrosion and withstand the test of time.

• Allow installation of ICON or other aftermarket leaf springs
• Semi-gloss black powder coat finish for corrosion resistance
• Fabricated from CNC laser cut steel plate
• Limited Lifetime Warranty

This Part Fits:

The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.

• Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
• 6061 hard anodized aluminum shock body provides excellent corrosion resistance
• 5WT shock oil for consistent suspension damping along a wide temperature range
• Offers increased wheel travel compared to ICON's dual steering stabilizer kit
• FK Rod End bearings for precise function & feel throughout steering range
• Provides symmetrical steering feel throughout input range
• Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
• Drastically increased steering damping over stock unit
• 7/8” chrome plated induction-hardened steel shaft
• Piggyback reservoir design
• 100% bolt-on installation

This Part Fits:

The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.

• Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
• 6061 hard anodized aluminum shock body provides excellent corrosion resistance
• 5WT shock oil for consistent suspension damping along a wide temperature range
• Offers increased wheel travel compared to ICON's dual steering stabilizer kit
• FK Rod End bearings for precise function & feel throughout steering range
• Provides symmetrical steering feel throughout input range
• Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
• Drastically increased steering damping over stock unit
• 7/8” chrome plated induction-hardened steel shaft
• Piggyback reservoir design
• 100% bolt-on installation

This Part Fits:

The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.

• Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
• 6061 hard anodized aluminum shock body provides excellent corrosion resistance
• 5WT shock oil for consistent suspension damping along a wide temperature range
• Offers increased wheel travel compared to ICON's dual steering stabilizer kit
• FK Rod End bearings for precise function & feel throughout steering range
• Provides symmetrical steering feel throughout input range
• Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
• Drastically increased steering damping over stock unit
• 7/8” chrome plated induction-hardened steel shaft
• Piggyback reservoir design
• 100% bolt-on installation

This Part Fits:

The ICON 2023-2025 Ford Super Duty F-250 / F-350 4WD Dual Steering Stabilizer System is designed to minimize bump steer feedback and smooths out the roughest of terrains felt through the steering wheel. By mounting the 2.0 Aluminum Series shock absorbers in an opposing manner the push/pull effect from their internal pressure is canceled out. This allows for far greater steering damping than available from a single, similarly sized steering stabilizer shock while ensuring the truck tracks straight down the road. This system bolts to the factory differential cover and wraps around the axle for a secure fit without cutting, welding or drilling. The shocks are connected to the tire rod with black anodized billet aluminum clamps for a secure fit and clean finish.

• Dual opposing design eliminates the push/pull sensation associated with traditional stabilizers
• Dual 2.0 aluminum Series shocks offer Increased steering damping over stock unit
• 6061 billet aluminum tie rod clamps, anodized for corrosion resistance
• Provides symmetrical steering feel throughout input range
• Semi-gloss black powder coat finish
• CNC laser cut steel components
• 100% bolt-on installation

This Part Fits:

The ICON 2005-2022 Ford Super Duty F-250 / F-350 4WD Dual Steering Stabilizer System is designed to minimize bump steer feedback and smooths out the roughest of terrains felt through the steering wheel. By mounting the 2.0 Aluminum Series shock absorbers in an opposing manner the push/pull effect from their internal pressure is canceled out. This allows for far greater steering damping than available from a single, similarly sized steering stabilizer shock while ensuring the truck tracks straight down the road. This system bolts to the factory differential cover and wraps around the axle for a secure fit without cutting, welding or drilling. The shocks are connected to the tire rod with black anodized billet aluminum clamps for a secure fit and clean finish.

• Dual opposing design eliminates the push/pull sensation associated with traditional stabilizers
• Dual 2.0 aluminum Series shocks offer Increased steering damping over stock unit
• 6061 billet aluminum tie rod clamps, anodized for corrosion resistance
• Provides symmetrical steering feel throughout input range
• Semi-gloss black powder coat finish
• CNC laser cut steel components
• 100% bolt-on installation

This Part Fits:

The ICON Radius Arm Drop Kit for the 2023-2025 Ford F-250/F-350 Super Duty 4WD allows the use of the stock or aftermarket radius arms with ICON 4.5” lift suspension systems. This kit consists of fabricated radius arm drop brackets, CNC laser cut and brake-formed from steel plate and is engineered to withstand the stresses of aggressive off-road driving. The drop brackets look as great as they perform with a durable semi-gloss black powder coat finish. Wheel with confidence knowing that the brackets are covered by ICON's Limited Lifetime Warranty.

• Brackets are fabricated from CNC laser cut and brake-formed steel plate
• Fabricated components covered under ICON's Limited Lifetime Warranty
• Drops radius arms for use with ICON 4.5” lift suspension systems
• Engineered to withstand the stresses of aggressive off-road use
• Application specific design for 2023-2025 Ford Super Duty 4WD
• 100% Bolt-on - no cutting or welding necessary for install
• Corrosion resistant semi-gloss black powder coat finish
• Reduces radius arm angle and aids in caster correction
• Fits stock or aftermarket radius arms

This Part Fits:

The ICON Vehicle Dynamics Ford 2005-2022 F-250, F-350, and F-450 Super Duty Radius Arm System is designed with adjustable caster cams for use with stock height trucks up to 3” of front lift with the radius arm installed in the factory pivot. When used in conjunction with an ICON radius arm drop bracket system, proper caster can also be maintained for 4” to 7" lifts, including coilover conversion systems. They feature a sealed pivot bushing that minimizes road feedback and ensures a long life and quiet operation. Additionally, their fabricated, fully boxed design ensures strength and utilizes a profile optimized for tire clearance at full steering lock, making a 37” tall tire clear without coming in contact with the radius arm.

• Ability to have a 5.5” backspace wheel with 37” tires without contact with the arm at steering lock
• Replaceable sealed pivot bushing provides maintenance free operation
• Built in caster adjustment for optimized return to center
• CNC machined and laser cut steel components
• Semi-gloss black powder coat finish
• Fully boxed design

This Part Fits:

This 2008-2025 Ford F-250/F-350/F-450 Track Bar Bump Steer Bracket Kit features a fabricated steel construction, protected by a durable semi-gloss powder coat finish, and carries a lifetime warranty against breakage or manufacturer defect. ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for enthusiasts that demand the highest levels of performance, ruggedness, and durability out of their suspension systems.

• Bolt-on design utilizes factory frame holes for simple installation
• Lifetime warranty against breakage or manufacturer defect
• Centers front axle under frame with factory track bar
• 2-position cam optimized for 2.5” & 4.5” lifts
• Reduces road feedback through steering
• Durable satin black powder coat finish
• Corrects bump steer geometry

This Part Fits:

The ICON Adjustable Track Bar helps center the axle of your lifted 2017-2025 Ford F-250 and F-350 Super Duty and allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with greaseable and replaceable OE style ball joint at the other end yields the best combination of maximum travel and articulation while also removing bushing deflection for improved handling characteristics. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1.625” x .250” wall 1026 DOM tubing with CNC machined threaded end and ball joint housing with a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.

• Heavy Duty PTFE-lined FK Rod End for maximum articulation and minimal deflection
• On-vehicle adjustable for precise track alignment using ICON’s double adjuster
• Helps to free up bind during front suspension travel and articulation
• Multi-stage black powder coat finish for corrosion resistance
• CNC machined and bent 1.625" X .250" wall 1026 DOM tubing
• Greaseable and replaceable OE style ball joint

This Part Fits:

The ICON 2" bump stop spacer kit drops OE bump stops of the 2005-2025 Ford F-250/F-350 Super Duty by 2” to limit up travel for fitment of certain suspension components such as steering stabilizers and coilover conversions, or ensuring clearance of larger tires when the suspension is fully compressed.

• Kit adds two inches to OE front bump stops
• CNC machined from 6061 aluminum
• Mounting hardware is included

This Part Fits:

This adjustable track bar for the 2005-2016 Ford Super Duty models will realign your front-end track alignment within factory specifications. It can be used on vehicles with 0" - 9" of lift but any lift over 5.5" will require the use of a drop-down bracket for the track bar. This track bar can easily be installed using factory hardware and can be adjusted on the truck without the need for removal. This track bar comes complete with FK rod end bearing and machined rod end spacers to eliminate the deflection of the stock bushing setup.

• Features rugged FK rod end bearings to eliminate deflection
• Fits 2005-2016 Ford Super Duty pickups
• Can be adjusted on the vehicle
• Mounts using factory hardware

This Part Fits:

The ICON Vehicle Dynamics 2023-2025 Ford F-250 and F-350 Super Duty 4.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 4.5" of lift height and feature a dual rate design optimized for use with trucks equipped with diesel engines. The dual rate design allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2023-2025 Ford F-250/F-350 Super Duty.

• Vehicle specific spring rates optimized for use with trucks equipped with diesel engines
• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 4.5" lift height over stock

This Part Fits:

The ICON Vehicle Dynamics 2020-2022 Ford F-250 & F-350 Super Duty 4.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 4.5" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2020-2022 Ford F-250 & F-350 Super Duty.

• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 4.5" lift height

This Part Fits:

The ICON Vehicle Dynamics 2005-2019 Ford F-250 & F-350 Super Duty 4.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 4.5" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2005-2019 Ford F-250 & F-350 Super Duty.

• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 4.5" lift height

This Part Fits:

Being able to set the Caster and Camber Alignment into proper specifications is critical for balance and stability of your Ford Super Duty. ICON Vehicle Dynamics 2005-UP Ford Super Duty Alignment Cam Kit provides additional adjustment over stock to align your Super Duty back into factory spec when lifted with our suspension systems. Ford Super Duty Alignment Cams ensure that your vehicles suspension and steering are working in precise coordination, improving overall drivability.

• Ensures proper front end alignment when installed in conjunction with compatible suspension lifts
• Adds 2.3° of caster and .5° of camber over stock
• Zinc plated for corrosion resistance
• Includes new ball joint cotter pins

This Part Fits:

The ICON Vehicle Dynamics 2023 F-250 and F-350 Super Duty 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5" of lift height and feature a dual rate design optimized for use with trucks equipped with gasoline engines. The dual rate design allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Caster correction cams are also included to ensure proper caster angle with the new, taller ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2023 Super Duty.

• Caster cam kit included for ideal caster angles with ride height increase
• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 2.5" lift height

This Part Fits:

The ICON Vehicle Dynamics 2023 Ford F-250 and F-350 Super Duty 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5" of lift height and feature a dual rate design optimized for use with trucks equipped with diesel engines. The dual rate design allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Caster correction cams are also included to ensure proper caster angle with the new, taller ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2023 Ford Super Duty.

• Caster cam kit included for ideal caster angles with ride height increase
• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 2.5" lift height

This Part Fits:

The ICON Vehicle Dynamics 2020-UP Ford F-250 & F-350 Super Duty 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Caster correction cams are also included to ensure proper caster angle with the new, taller ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2020-UP Ford F-250 & F-350 Super Duty.

• Caster cam kit included for ideal caster angles with ride height increase
• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 2.5" lift height

This Part Fits:

The ICON Vehicle Dynamics 2005-2019 Ford F-250 & F-350 Super Duty 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Caster correction cams are also included to ensure proper caster angle with the new, taller ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2005-2019 Ford F-250 & F-350 Super Duty.

• Caster cam kit included for ideal caster angles with ride height increase
• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 2.5" lift height

This Part Fits:

ICON's 2.5 VS Series Remote Reservoir CDCV Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2023 F-250 and F-350 pickup trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like ICON engineered coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary. ICON’s CDC (Compression Damping Control) Valve option adds to the adjustability of these coilover conversion kits, allowing the end-user to adjust the ride characteristics of the vehicle with the turn of a knob.

• Ride height adjustable coilovers provide 2.5-3" or 3.25-3.75" of lift, depending on year model of truck
• Vehicle-specific shock valving provides unparalleled ride quality and control
• CDCV technology allows for quick and easy compression damping adjustment
• Eibach coil springs guaranteed for life against sagging or breakage
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• FK Rod End bearings for extended longevity and minimal deflection
• Decreased body roll and improved on and off-road ride dynamics
• Coilover conversion allows for addition of secondary shock
• Bolt-in system fits in OE coil bucket location
• Shocks are fully rebuildable and revalveable

This Part Fits:

ICON's 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2023 F-250 and F-350 pickup trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like ICON engineered coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.

• Ride height adjustable coilovers provide 2.5-3" or 3.25-3.75" of lift, depending on year model of truck
• Vehicle-specific shock valving provides unparalleled ride quality and control
• Eibach coil springs guaranteed for life against sagging or breakage
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• FK Rod End bearings for extended longevity and minimal deflection
• Decreased body roll and improved on and off-road ride dynamics
• Coilover conversion allows for addition of secondary shock
• Bolt-in system fits in OE coil bucket location
• Shocks are fully rebuildable and revalveable

This Part Fits:

ICON's 2.0 Aluminum Series shock boot helps protect your shock shaft from potentially damaging road and trail debris. Easily attaches to any 2.0 Aluminum Series shock with up to 11" of travel using the supplied hardware.

• Easily attaches to any 2.0 Aluminum Series shock with up to 11" of travel using the supplied hardware
• Protects your shock shaft from potentially damaging road and trail debris
• Fits ICON 2.0 Aluminum Series shocks

Fitment verification is the duty of the installer! Failure to cycle suspension and check for bind issues may lead to component failure and/or injury. Professional installation required.

• Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
• Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
• Retrofit kits allow for installation of Delta Joint into wide range of aftermarket upper control arms using a 1" uniball
• Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
• Metal on metal internals and a greasable design for maximum longevity and noise-free operation
• Retrofit kits include a pair of Delta Joints, retaining rings, and a supply of anti-seize
• Application specific taper pins for precise fit across a wide range of vehicles
• Pullout strength greater than comparable industry standard uniball
• Capable of high angularity required for lifted applications

This Part Fits:

ICON’s Delta Joint is a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint’s zinc plated housing provides the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while also allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and capable of greater angularity than a typical ball joint.

• Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
• Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
• Retrofit kits allow for installation of Delta Joint into wide range of aftermarket upper control arms using a 1" uniball
• Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
• Metal on metal internals and a greasable design for maximum longevity and noise-free operation
• Retrofit kits include a pair of Delta Joints, retaining rings, and a supply of anti-seize
• Application specific taper pins for precise fit across a wide range of vehicles
• Pullout strength greater than comparable industry standard uniball
• Capable of high angularity required for lifted applications

This Part Fits:

ICON’s Delta Joint is a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint’s zinc plated housing provides the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while also allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to Non-ICON upper control arms with features that make it more robust than a uniball, and capable of greater angularity than a typical ball joint.

• Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
• Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
• Retrofit kits allow for installation of Delta Joint into wide range of aftermarket upper control arms using a 1" uniball
• Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
• Metal on metal internals and a greasable design for maximum longevity and noise-free operation
• Retrofit kits include a pair of Delta Joints, retaining rings, and a supply of anti-seize
• Application specific taper pins for precise fit across a wide range of vehicles
• Pullout strength greater than comparable industry standard uniball
• Capable of high angularity required for lifted applications

This Part Fits:

ICON’s Delta Joint is more robust than a uniball and capable of greater angularity than a typical ball joint. Its metal-on-metal construction and a greaseable design increases longevity while also allowing for noise-free operation.

• 5 Year ICON Limited Warranty (When used with ICON Vehicle Dynamics suspension components, visit www.iconvehicledynamics.com/deltajoint for more info)
• Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
• Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
• Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
• Metal on metal internals and a greasable design for maximum longevity and noise-free operation
• Application specific taper pins for precise fit across a wide range of vehicles
• Pullout strength greater than comparable industry standard uniball
• Capable of high angularity required for lifted applications

This Part Fits: