Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
672 products
672 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Top Outside Diameter 5.350"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "4.50"
- Overall Height 6.45"+/-.150"
- Base Outside Diameter 6.75"
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$70.97
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All of Injen's 8-layer cotton gauze oiled air filters feature a tightly layered media that is specified for our use, along with a proprietary filter oil that includes highly advanced tackifiers to stop as much dirt and contaminants as possible. This allows our 8-layer oiled cotton gauze air filters to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with the use of our Pro Tech air filter cleaning kit ? part number X-1030. Order yours today!, , Lab Tested ? Race Proven!, Our media was lab tested by an outside company to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's 8-layer oiled cotton gauze media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Clean and Recharge your Air Filter with X-1030 Cleaning Kit
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze
- Deep pleats for maximum airflow and efficiency
- Made in Pomona California, USA
- Flange Inside Diameter "3.00"
- Overall Height 6.90"+/-.150"
- Base Outside Diameter 5.00"
- Top Outside Diameter 4.00"
- Top Style; Closed Urethane
- Conical Air Filter Shape
- Filter oil in Grams - 22
- Flange Height 1.75"
- Media Height 5.00"
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Flange Inside Diameter "3.00"
- Overall Height 6.90"+/-.150"
- Base Outside Diameter 5.00"
- Top Outside Diameter 4.00"
- Top Style; Closed Urethane
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$70.97
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All of Injen's 8-layer cotton gauze oiled air filters feature a tightly layered media that is specified for our use, along with a proprietary filter oil that includes highly advanced tackifiers to stop as much dirt and contaminants as possible. This allows our 8-layer oiled cotton gauze air filters to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with the use of our Pro Tech air filter cleaning kit ? part number X-1030. Order yours today!, , Lab Tested ? Race Proven!, Our media was lab tested by an outside company to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's 8-layer oiled cotton gauze media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Clean and Recharge your Air Filter with X-1030 Cleaning Kit
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze
- Deep pleats for maximum airflow and efficiency
- Top Outside Diameter 5.350"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "3.50"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Filter oil in Grams - 29
- Flange Height 1.75"
- Media Height 5.00"
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Top Outside Diameter 5.350"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "3.50"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$70.97
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All of Injen's 8-layer cotton gauze oiled air filters feature a tightly layered media that is specified for our use, along with a proprietary filter oil that includes highly advanced tackifiers to stop as much dirt and contaminants as possible. This allows our 8-layer oiled cotton gauze air filters to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with the use of our Pro Tech air filter cleaning kit ? part number X-1030. Order yours today!, , Lab Tested ? Race Proven!, Our media was lab tested by an outside company to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's 8-layer oiled cotton gauze media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Clean and Recharge your Air Filter with X-1030 Cleaning Kit
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze
- Deep pleats for maximum airflow and efficiency
- Top Outside Diameter 5.30"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "3.00"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Filter oil in Grams - 29
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Top Outside Diameter 5.30"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "3.00"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$70.97
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All of Injen's 8-layer cotton gauze oiled air filters feature a tightly layered media that is specified for our use, along with a proprietary filter oil that includes highly advanced tackifiers to stop as much dirt and contaminants as possible. This allows our 8-layer oiled cotton gauze air filters to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with the use of our Pro Tech air filter cleaning kit ? part number X-1030. Order yours today!, , Lab Tested ? Race Proven!, Our media was lab tested by an outside company to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's 8-layer oiled cotton gauze media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Clean and Recharge your Air Filter with X-1030 Cleaning Kit
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze
- Deep pleats for maximum airflow and efficiency
- Top Outside Diameter 5.30"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "2.75"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Filter oil in Grams - 29
- Flange Height 1.75"
- Media Height 5.00"
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Top Outside Diameter 5.30"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "2.75"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$70.97
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All of Injen's 8-layer cotton gauze oiled air filters feature a tightly layered media that is specified for our use, along with a proprietary filter oil that includes highly advanced tackifiers to stop as much dirt and contaminants as possible. This allows our 8-layer oiled cotton gauze air filters to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with the use of our Pro Tech air filter cleaning kit ? part number X-1030. Order yours today!, , Lab Tested ? Race Proven!, Our media was lab tested by an outside company to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's 8-layer oiled cotton gauze media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Clean and Recharge your Air Filter with X-1030 Cleaning Kit
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze
- Deep pleats for maximum airflow and efficiency
- Top Outside Diameter 5.30"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "2.50"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Filter oil in Grams - 29
- Flange Height 1.75"
- Media Height 5.00"
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Top Outside Diameter 5.30"Inertia Top
- Top Style; Closed Inertia Cone Top
- Made in Pomona California, USA
- Flange Inside Diameter "2.50"
- Overall Height 6.60"+/-.150"
- Base Outside Diameter 6.00"
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$70.97
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All of Injen's 8-layer cotton gauze oiled air filters feature a tightly layered media that is specified for our use, along with a proprietary filter oil that includes highly advanced tackifiers to stop as much dirt and contaminants as possible. This allows our 8-layer oiled cotton gauze air filters to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with the use of our Pro Tech air filter cleaning kit ? part number X-1030. Order yours today!, , Lab Tested ? Race Proven!, Our media was lab tested by an outside company to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's 8-layer oiled cotton gauze media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Clean and Recharge your Air Filter with X-1030 Cleaning Kit
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze
- Deep pleats for maximum airflow and efficiency
- Made in Pomona California, USA
- Flange Inside Diameter "2.75"
- Overall Height 6.90"+/-.150"
- Base Outside Diameter 5.00"
- Top Outside Diameter 4.00"
- Top Style; Closed Urethane
- Conical Air Filter Shape
- Filter oil in Grams - 22
- Flange Height 1.75"
- Media Height 5.00"
$76.27
With a rich history in racing and the street performance, Injen Technology has proven itself as a leader in filtration engineering and technology. Lab tested and race proven, Injen's air filter line features state of the art designs and performance. All SuperNano-Web air filters feature a proprietary media that includes and high-flow base media with a highly efficient Nano membrane applied on top. This allows our SuperNano-Web media to flow the maximum amount of air, all while protecting your valuable engine from harmful dirt and debris. 100% cleanable with a light blast of compressed air and requiring no oil to function properly, you'll never have to worry about your MAF sensor becoming dirty from over oiling your air filter again; Lab Tested ? Race Proven!, Our media was lab tested by an outside lab to ensure accuracy and filtration performance. We then took that data and tested in the harshest conditions by racing the Baja 1000 in Mexico and also throughout the sand dunes of the Middle East ? all to provide you with best air filter that money can buy. Improve Performance while Protecting Your Engine., Injen's High-flow SuperNano-Web media was designed to improve airflow and filtration efficiency resulting in increased horsepower and torque, all while protecting your engine from harmful dirt and contaminants.
- Direct Fit for many Injen intakes and/or universal applications
- Dry filtration media; no oil required for maximum performance
- Integrated Ridges In Flange Insures A Tight No Leak Seal
- Stainless steel band clamp with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Deep pleats for maximum airflow and efficiency
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Flange Inside Diameter "2.75"
- Overall Height 6.90"+/-.150"
- Base Outside Diameter 5.00"
- Top Outside Diameter 4.00"
- Top Style; Closed Urethane
- Conical Air Filter Shape
- Flange Height 1.75"
- Media Height 5.00"
$416.18
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Increased Torque up to 10 ft./lbs.
- Made in Pomona, California USA
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2016 | Ford | Fusion | SE |
| 2014-2016 | Ford | Fusion | Titanium |
$416.18
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque up to 10 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2016 | Ford | Fusion | SE |
| 2014-2016 | Ford | Fusion | Titanium |
$339.14
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsTechnical Drawing
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1012-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 6 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2020 | Ford | Fusion | S |
| 2013-2020 | Ford | Fusion | SE |
| 2019 | Ford | Fusion | SEL |
$339.14
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1012-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 6 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2020 | Ford | Fusion | S |
| 2013-2020 | Ford | Fusion | SE |
| 2019 | Ford | Fusion | SEL |
$356.26
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1015-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 11 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2012 | Ford | Fusion | Sport |
$361.61
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsDatasheet
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 12 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 11 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2012 | Ford | Fusion | Hybrid |
| 2010-2012 | Ford | Fusion | S |
| 2010-2012 | Ford | Fusion | SE |
| 2010-2012 | Ford | Fusion | SEL |
$289.92
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1081-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 7 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Ford | Fiesta | ST |
$366.96
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsTechnical Drawing
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1010-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 7 ft./lbs.
- Available in multiple finishes
- Made in Pomona, California USA
- 6061-T6 aluminum intake tubing
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2019 | Ford | Fiesta | S |
| 2014-2019 | Ford | Fiesta | SE |
| 2014-2019 | Ford | Fiesta | ST |
| 2019 | Ford | Fiesta | ST Line |
| 2014-2018 | Ford | Fiesta | Titanium |
$361.61
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1012-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 9 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2015 | Ford | Fiesta | ST |
$361.61
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1012-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 9 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2015 | Ford | Fiesta | ST |
$467.54
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Available w/Polished/Wrinkle Black/Wrinkle Red/Hyper Blue Pipe
- Dyno Proven gains of up to 18 hp and 17 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Ford | Focus | RS |
$416.18
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsDatasheet
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 4.2 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2018 | Ford | Focus | ST |
$416.18
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 4.2 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2018 | Ford | Focus | ST |
$416.18
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 4.2 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2018 | Ford | Focus | ST |
$537.09
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Datasheet
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 14 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2014 | Ford | Focus | ST |
$537.09
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Datasheet
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 14 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2014 | Ford | Focus | ST |
$519.97
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Installation InstructionsInstallation Instructions
- Rotomolded air filter housing featuring our patented twist lock technology
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 21 hp and 13 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- CARB EO #: D-476-5 (2003-2009 Model Years Only)
- Replacement air filter part number X-1114-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008 | Mazda | RX-8 | 40th Anniversary Edition |
| 2004-2007 | Mazda | RX-8 | Base |
| 2008-2011 | Mazda | RX-8 | Grand Touring |
| 2009-2011 | Mazda | RX-8 | R3 |
| 2005 | Mazda | RX-8 | Shinka |
| 2008-2011 | Mazda | RX-8 | Sport |
| 2008-2009 | Mazda | RX-8 | Touring |
Showing 90/672
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.