Fits 2014-2019 Ford Fiesta S, SE, ST, ST Line, and Titanium models (1.6L).

The Injen SP Series cold air intake (SP9017P) is engineered to unlock hidden horsepower and torque by providing your engine with a cooler, denser air charge. Constructed from mandrel-bent 6061-T6 aluminum tubing, this system replaces the restrictive factory airbox and intake tract with a smooth-bore path that optimizes airflow velocity. The polished finish offers a high-performance aesthetic under the hood while maintaining safe air-to-fuel ratios without the need for aftermarket tuning.

This system utilizes Injen's patented MegaRam (MR) and Air Fusion technologies, which tune the intake to specific diameters and lengths to manage airflow more effectively than standard piping. Each kit includes a SuperNano-Web dry air filter, offering high-efficiency filtration and increased surface area for improved breathability without the maintenance requirements of oiled filters.

• Dyno-proven gains of up to 8 hp and 7 lb-ft of torque
• Mandrel-bent 6061-T6 aluminum intake tubing with a polished finish
• Patented MegaRam (MR) and Air Fusion technology for optimized tuning
• Includes a fully serviceable Injen SuperNano-Web dry air filter
• No additional tuning required for operation
• Replacement air filter: X-1010-BB (Optional Hydroshield: 1035BLK/RED)
• Manufacturer Part Number: SP9017P
• Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not legal for sale or use in California on emissions-controlled vehicles.

Fits 2014-2015 Ford Fiesta ST (1.6L).

The Injen SP Series short ram intake is engineered to optimize airflow and increase performance for the 1.6L turbocharged Ford Fiesta ST. This system utilizes Injen’s patented MegaRam (MR) and Air Fusion technologies to maintain safe air-to-fuel ratios while delivering significant power gains across the power band. Constructed from mandrel-bent 6061-T6 aluminum, the intake tube provides a smooth, uninterrupted path for air to reach the turbocharger, eliminating the restrictions of the factory induction system.

This kit includes a custom-designed heat shield to isolate the filter from engine bay heat and a SuperNano-Web dry air filter, which offers superior filtration efficiency and increased surface area without the need for oiling. Designed for a direct-fit installation, this system requires no additional tuning and delivers an aggressive, throaty engine tone under load.

• Direct fit for 2014-2015 Ford Fiesta ST (1.6L Turbo)
• Dyno-proven gains of up to 10 hp and 9 lb-ft of torque
• Mandrel-bent 6061-T6 aluminum intake tubing in a Wrinkle Black finish
• Patented MegaRam (MR) and Air Fusion Technology tuning
• Fully serviceable Injen SuperNano-Web dry air filter (Replacement Part: X-1012-BB)
• Includes custom application-specific heat shield and necessary hardware
• No additional ECU tuning required
• Manufacturer Part Number: SP9016WB
• Made in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Fits 2014-2015 Ford Fiesta ST (1.6L).

The Injen SP Series short ram intake is a performance-tuned air induction system engineered to maximize airflow for the 1.6L turbo engine. Utilizing Injen's patented MegaRam (MR) and Air Fusion technologies, this system is precision-tuned to maintain safe air-to-fuel ratios while delivering dyno-proven gains of up to 10 horsepower and 9 lb-ft of torque. The intake features CNC-mandrel bent 6061-T6 aluminum tubing to provide a smooth, unrestricted path for incoming air, significantly improving throttle response and producing an aggressive engine tone under full throttle.

This kit includes an application-specific heat shield designed to isolate the intake from ambient engine bay heat, ensuring cooler, denser air reaches the turbocharger. It comes equipped with a fully serviceable SuperNano-Web dry air filter, which offers high-flow surface area and superior filtration without the maintenance requirements of oiled filters.

• Dyno-proven gains of up to 10 hp and 9 lb-ft of torque
• Polished 6061-T6 aluminum intake tubing eliminates factory restrictions
• Patented MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571)
• Patented Air Fusion Technology (Patents 7,757,548 and 7,721,699)
• Includes custom heat shield specifically designed for the Fiesta ST
• SuperNano-Web dry air filter (Replacement: X-1012-BB)
• Compatible with optional hydroshield (PN: 1033BLK / 1033RED)
• Direct bolt-on design with no additional tuning required
• Manufacturer Part Number: SP9016P
• Hand-crafted in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty

Notice: This product is not currently CARB exempt and is not available for purchase or use in California on any vehicle registered with the California DMV.

Fits 2016-2018 Ford Focus RS.

The Injen Technology SP Series cold air intake is the flagship induction system for the Ford Focus RS, designed to optimize airflow and maximize power delivery. Constructed from mandrel-bent 6061-T6 aluminum, this system eliminates the restrictions of the factory intake to provide a smooth, high-velocity path to the turbocharger. The SP series incorporates Injen’s patented MegaRam (MR) and Air Fusion technologies, which allow the system to provide significant gains while maintaining safe air/fuel ratios without the need for an aftermarket tune.

This kit includes a fully serviceable SuperNano-Web dry air filter, which offers a larger surface area for increased flow and superior filtration compared to OE paper filters. To further enhance performance and protect against heat soak, Injen includes a custom-engineered heat shield with a dedicated cover specifically for the Focus RS engine bay. On the dyno, this system has demonstrated gains of up to 18 hp and 17 lb-ft of torque, accompanied by a more aggressive engine note under load.

• High-grade 6061-T6 aluminum intake tubing in a Wrinkle Black finish
• Patented MegaRam (MR) and Air Fusion technology for optimized tuning
• Custom heat shield and cover included to block engine bay heat
• SuperNano-Web dry air filter (reusable/serviceable)
• Dyno-proven performance: +18 HP and +17 lb-ft Torque
• Direct bolt-on design with no additional tuning required
• Replacement filter: X-1021-BB | Optional hydroshield: 1037BLK/RED
• Manufactured in Pomona, California, USA
• Limited Lifetime Warranty
• Manufacturer Part Number: SP9003WB

Notice: This product is not currently CARB exempt and is not available for purchase in California or for use on vehicles registered with the California DMV.

Fits 2015-2018 Ford Focus ST (2.0L).

Enhance the performance and acoustics of your Focus ST with the Injen SP Series Short Ram Intake. This flagship system features 6061-T6 aluminum intake tubing, mandrel-bent to ensure smooth, unrestricted airflow directly to your turbocharger. By replacing the restrictive factory air box with a high-flow short ram design and an application-specific heat shield, this kit is dyno-proven to deliver gains of up to 16 hp and 16 lb-ft of torque.

At the heart of the SP9002WR is Injen’s patented MegaRam (MR) Technology. This specialized tuning process allows the intake to maintain safe air-fuel ratios across the entire power band without requiring an aftermarket ECU tune. The kit includes a SuperNano-Web dry air filter, providing superior filtration and increased surface area for maximum breathability while remaining fully serviceable.

• Direct fit for 2015-2018 Ford Focus ST (2.0L)
• Mandrel-bent 6061-T6 aluminum tubing with a durable Wrinkle Red finish
• Patented MegaRam (MR) Technology and Air Fusion tuning
• Includes custom heat shield and cover for thermal management
• SuperNano-Web dry air filter (Replacement: X-1021-BB)
• Dyno-proven gains: Up to 16 hp and 16 lb-ft torque
• Aggressive engine tone under full throttle
• No additional tuning required for operation
• Injen Technology Limited Lifetime Warranty
• Manufacturer Part Number: SP9002WR

Note: This product is not currently CARB exempt and is not available for purchase in California or for use on vehicles registered with the California DMV.

Fits 2015-2018 Ford Focus ST (2.0L).

Give your engine the airflow it needs with the Injen SP Series Short Ram Intake. Engineered specifically for the 2.0L EcoBoost, this system replaces the restrictive factory airbox with a mandrel-bent 6061-T6 aluminum intake tube and a custom-designed heat shield. The result is a more direct path for air to reach the turbo, delivering an aggressive engine tone under full throttle and dyno-proven performance gains of up to 16 hp and 16 lb-ft of torque.

This system features Injen’s patented MegaRam (MR) Technology, which tunes the intake to maintain safe air-fuel (A/F) ratios throughout the power band without requiring additional ECU tuning. Filtration is handled by the SuperNano-Web dry air filter, which provides high-efficiency filtration and increased surface area for improved flow while remaining fully serviceable.

• 6061-T6 aluminum intake tubing with a polished finish
• Includes application-specific heat shield with cover
• Patented MegaRam (MR) Technology for optimized airflow and A/F ratios
• SuperNano-Web dry air filter (Part #X-1021-BB)
• Compatible with optional hydroshield (Part #1037BLK or 1037RED)
• Direct bolt-on installation with no tuning required
• Manufacturer Part Number: SP9002P
• Made in Pomona, California, USA
• Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase in California or for use on vehicles registered with the California DMV.

Fits 2015-2018 Ford Focus ST (2.0L).

Optimize your engine's respiratory system with the Injen SP Series Short Ram Intake. Engineered as a flagship performance upgrade, this system replaces the restrictive factory airbox with a mandrel-bent 6061-T6 aluminum intake tube, providing a smooth, high-velocity path for airflow directly to the turbocharger. The SP9002BLK features Injen’s patented MegaRam (MR) Technology and Air Fusion tuning, which precisely calibrates the MAF sensor to maintain safe air/fuel ratios while delivering dyno-proven gains of up to 16 hp and 16 lb-ft of torque.

This kit includes a custom-designed heat shield with a dedicated cover to isolate the intake from engine bay heat soak, ensuring a cooler, denser air charge. It comes equipped with the SuperNano-Web dry air filter (X-1021-BB), which offers superior filtration efficiency and increased surface area without the need for oiling. Designed for a straightforward installation using factory mounting points, this system provides an aggressive, throaty engine tone under load.

• 6061-T6 aluminum intake tubing with a durable black finish
• Patented MegaRam (MR) Technology for precise MAF sensor tuning
• Includes custom heat shield and cover for thermal management
• SuperNano-Web dry air filter (Part #X-1021-BB) is fully serviceable
• Dyno-proven gains up to 16 hp and 16 lb-ft of torque
• Made in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty
• Manufacturer Part Number: SP9002BLK

Note: This product is not currently CARB exempt and is not legal for sale or use in California.

Fits 2013-2014 Ford Focus ST (2.0L).

Unlock the performance potential of your EcoBoost engine with the Injen SP Series short ram intake. This system replaces the restrictive factory airbox with a mandrel-bent 6061-T6 aluminum intake tube, designed to provide a smooth, uninterrupted path for high-velocity airflow. Featuring Injen's patented MegaRam (MR) Technology and Air Fusion tuning, this system is engineered to deliver dyno-proven gains of up to 14 hp and 14 lb-ft of torque while maintaining safe air-to-fuel ratios without the need for additional tuning.

This kit includes a custom-designed heat shield with a cover to isolate the intake from engine bay heat soak. Filtration is handled by the Injen SuperNano-Web dry air filter, which offers superior surface area for improved flow and high-efficiency filtration without the need for oiling. The polished finish provides a clean, professional aesthetic under the hood, complemented by an aggressive, throaty engine tone under load.

• 6061-T6 aluminum intake tubing with polished finish
• Patented MegaRam (MR) Technology and Air Fusion tuning
• Includes custom heat shield and cover
• SuperNano-Web dry air filter (Replacement Part: X-1021-BB)
• Dyno-proven gains of up to 14 hp and 14 lb-ft torque
• No additional ECU tuning required
• Made in Pomona, California
• Manufacturer Part Number: SP9001P
• Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase or use in California.

Fits 2013-2014 Ford Focus ST (2.0L).

Unlock hidden performance in your 2.0L EcoBoost engine with the Injen SP Series Short Ram Intake. This system replaces the restrictive factory airbox with a mandrel-bent 6061-T6 aluminum intake tube, engineered to provide a smooth, high-velocity path for airflow. Using Injen's patented MegaRam (MR) Technology and Air Fusion tuning, this intake is precisely calibrated to maintain safe air-fuel ratios while delivering dyno-proven gains of up to 14 horsepower and 14 lb-ft of torque without the need for additional tuning.

The kit features a custom-designed heat shield and cover that isolates the intake from engine bay heat, ensuring cooler air charges. Filtration is handled by the Injen SuperNano-Web dry air filter, which provides superior surface area and filtration efficiency without the need for oiling. This intake also transforms the engine note, providing an aggressive, throaty sound under full throttle.

• 6061-T6 aluminum intake tubing with a durable black finish
• Patented MegaRam (MR) Technology for precise air-fuel ratio tuning
• Injen SuperNano-Web dry air filter (Part #X-1021-BB)
• Custom heat shield with integrated cover included
• Dyno-proven gains: up to 14 hp and 14 lb-ft of torque
• Direct bolt-on installation with no cutting or drilling required
• Made in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty
• Manufacturer Part Number: SP9001BLK

Note: This product is not currently CARB exempt and is not available for purchase or use in California.

Fits 2004-2011 Mazda RX-8 models (1.3L 2-Rotor). This Injen SP Series Short Ram Intake replaces the restrictive factory airbox with a high-flow, tuned induction system designed to optimize airflow and throttle response.

Constructed from mandrel-bent 6061-T6 aluminum, the SP6080WB features Injen's patented MegaRam (MR) Technology and Air Fusion Technology. These innovations allow the system to be precisely tuned to maintain safe air/fuel ratios while maximizing power delivery. The system includes a fully serviceable Injen SuperNano-Web dry air filter, which provides high-efficiency filtration without the need for filter oil.

• Dyno-proven gains of up to 21 hp and 13 lb-ft of torque
• Mandrel-bent 6061-T6 aluminum intake tubing for smooth airflow
• Patented MegaRam (MR) and Air Fusion Technology tuning
• SuperNano-Web dry air filter (Replacement Part: X-1114-BB)
• CARB EO #: D-476-5 (Valid for 2003-2009 model years only)
• Direct bolt-on design with no additional tuning required
• Durable wrinkle black finish
• Made in Pomona, California, USA
• Manufacturer Part Number: SP6080WB

Fits 2014-2017 Mazda 6 Sport, Touring, and Grand Touring models (2.5L).

Unlock hidden potential in your SkyActiv engine with the Injen SP Series cold air intake. This flagship system is engineered from 6061-T6 mandrel-bent aluminum to provide a smooth, unrestricted path for incoming air. By relocating the air filter outside the engine bay, the SP6073BLK draws in cooler, denser air for improved combustion and dyno-proven gains of up to 6 HP and 6 lb-ft of torque.

This system features Injen's patented MegaRam (MR) and Air Fusion technologies, which tune the intake tract to maintain safe air-fuel ratios without requiring an aftermarket tune. It comes equipped with a SuperNano-Web dry air filter, providing high-flow performance and superior filtration without the need for filter oil.

• Performance Gains: Up to 6 HP and 6 lb-ft of torque.
• Tuned Intake: Patented MR Tech and Air Fusion stabilize airflow and A/F ratios.
• Premium Construction: 6061-T6 aluminum piping with a durable black finish.
• Dry Filtration: Includes a fully serviceable SuperNano-Web dry air filter (X-1014-BB).
• Exclusions: Does not fit i-Eloop models or vehicles equipped with LED Adaptive Headlights.
• Manufacturing: Built in Pomona, California, USA.
• Warranty: Backed by Injen Technology’s Limited Lifetime Warranty.

Fits 2013-2018 Mazda 3 models equipped with the 2.0L engine. This Injen SP Series short ram intake is engineered to optimize airflow and provide consistent power gains across the entire RPM range.

Constructed from mandrel-bent 6061-T6 aluminum, the SP6068P replaces restrictive factory intake components with a smooth, high-flow path. This system features Injen's patented MegaRam (MR) and Air Fusion technologies to maintain safe air-fuel ratios while delivering dyno-proven gains of up to 13 horsepower and 12 lb-ft of torque. The kit includes a fully serviceable SuperNano-Web dry air filter, providing superior filtration without the need for filter oil.

• Dyno-proven gains: Up to 13 hp and 12 lb-ft of torque
• Premium 6061-T6 aluminum intake tubing with a polished finish
• Patented MegaRam (MR) and Air Fusion Technology for optimized tuning
• Includes Injen SuperNano-Web dry air filter (Replacement Part # X-1017-BB)
• No additional tuning or ECU flashing required
• Aggressive engine tone under acceleration
• Made in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase or use in California.

Fits 2013-2018 Mazda 3 models equipped with the 2.0L engine. This Injen SP series intake replaces the restrictive factory airbox to improve airflow and enhance engine performance.

Engineered for efficiency, the SP series features a mandrel-bent 6061-T6 aluminum intake tube that provides a smooth, uninterrupted path for high-velocity air. Utilizing Injen’s patented MegaRam (MR) and Air Fusion technologies, this system is tuned to maintain safe air-fuel ratios across the power band without requiring additional ECU tuning. The short ram design delivers an aggressive, throaty engine tone under throttle while maximizing throttle response.

The system includes a fully serviceable SuperNano-Web dry air filter, offering high-capacity filtration and increased surface area compared to stock filters. Dyno testing shows gains of up to 13 horsepower and 12 lb-ft of torque on a factory-tuned vehicle.

• 6061-T6 aluminum intake tubing with a durable black finish
• Fully serviceable Injen SuperNano-Web dry air filter (X-1017-BB)
• Dyno-proven gains of up to 13 hp and 12 lb-ft of torque
• Patented MegaRam (MR) and Air Fusion technology for precise tuning
• Direct bolt-on installation with no additional tuning required
• Made in Pomona, California USA
• Manufacturer Part Number: SP6068BLK
• Injen Technology Limited Lifetime Warranty

Notice: This product is not currently CARB exempt and is not available for purchase or use on vehicles registered in California.

Fits 2010-2012 Mazda 3 S (2.5L).

The Injen SP Series Short Ram Intake (SP6067BLK) is a precision-engineered performance upgrade designed to improve airflow and throttle response for the 2.5L Mazda 3. Constructed from CNC mandrel-bent 6061-T6 aluminum, this system replaces restrictive factory components with a smooth, high-velocity path to the intake manifold. Utilizing patented Air Fusion and MegaRam (MR) Technology, this intake ensures optimal air-fuel ratios while delivering dyno-proven gains of up to 7 hp and 8 lb-ft of torque.

This kit includes a fully serviceable Injen SuperNano-Web dry air filter, providing high-efficiency filtration without the maintenance of oiled media. The short ram design delivers a more aggressive, throaty engine tone under acceleration and maintains a clean aesthetic in the engine bay. Note: This product is not currently CARB exempt and is not available for purchase in California or for use on vehicles registered with the California DMV.

• Direct fit for 2010-2012 Mazda 3 S (2.5L)
• 6061-T6 aluminum intake tubing in a durable black finish
• Dyno-proven performance gains: 7 hp and 8 lb-ft torque
• Serviceable SuperNano-Web dry air filter (Replacement P/N: X-1013-BB)
• Features patented Air Fusion and MegaRam (MR) Tuning Technology
• Optional hydroshield compatible (P/N: 1033BLK or 1033RED)
• No additional ECU tuning required for installation
• Manufactured in Pomona, California, USA
• Includes Injen Technology Limited Lifetime Warranty

Fits 2013-2018 Mazda 3 (2.0L) models equipped with SkyActiv engines and automatic transmissions.

The Injen SP Series cold air intake is the flagship performance system for the 2.0L Mazda 3. Constructed from 6061-T6 mandrel-bent aluminum, the SP6065BLK provides a smooth, uninterrupted airflow path that significantly reduces intake restriction. This system utilizes Injen's patented MegaRam (MR) Technology and Air Fusion tuning to ensure the engine receives the optimal air-to-fuel ratio for safe, reliable power across the entire power band.

Equipped with a fully serviceable SuperNano-Web dry air filter, this intake increases filtration surface area for better flow and engine protection without the maintenance requirements of oiled filters. On the dyno, this system has demonstrated gains of up to 9 hp and 10 lb-ft of torque, providing an aggressive engine tone and improved throttle response that you can hear and feel.

• Manufacturer Part Number: SP6065BLK
• Material: 6061-T6 Aluminum Tubing
• Filter Type: SuperNano-Web Dry Air Filter (Replacement: X-1056-BB)
• Performance Gains: Up to +9 HP and +10 lb-ft Torque
• Engine Compatibility: SkyActiv 2.0L 4-Cylinder only
• Transmission Fitment: Automatic Transmission (AT) only
• Finish: Textured Black Powder Coat
• Technology: Patented MR Technology and Air Fusion Tuning
• Note: Not CARB exempt; not legal for sale or use in California

Fits 2007-2013 Mazda 3 Mazdaspeed (2.3L).

The Injen SP Series short ram intake system is engineered to replace restrictive factory air boxes with a high-flow, tuned induction solution. Built from mandrel-bent 6061-T6 aluminum, this system utilizes Injen’s patented MegaRam (MR) and Air Fusion technologies to optimize airflow velocity and volume while maintaining safe air/fuel ratios across the power band. This design yields dyno-proven increases of up to 7 horsepower and 9 lb-ft of torque.

Included in this kit is a custom-designed heat shield with a cover, specifically tailored for the Mazdaspeed 3 engine bay to protect the intake charge from ambient heat soak. The system features a fully serviceable SuperNano-Web dry air filter, providing superior filtration and airflow without the maintenance requirements of oiled filters. This intake is manufactured in Pomona, California, and provides a distinct, aggressive engine note under full throttle.

• 6061-T6 aluminum intake tubing with a durable black finish
• Patented MegaRam (MR) and Air Fusion tuning technology
• SuperNano-Web dry air filter (Replacement Part: X-1013-BB)
• Custom heat shield with cover for improved thermal management
• CARB EO #: D-476-8 (California Smog Legal)
• Installation hardware and instructions included
• Injen Technology Limited Lifetime Warranty
• MPN: SP6063BLK

Fits 2007-2013 Mazda 3 Mazdaspeed (2.3L) models equipped with a manual transmission.

Unlock the performance potential of your turbocharged engine with the Injen SP Series cold air intake. This flagship system is engineered from mandrel-bent 6061-T6 aluminum to provide a smooth, unrestricted path for high-velocity airflow. Unlike generic intakes, the SP series features Injen’s patented MegaRam (MR) and Air Fusion technology, which allows the system to be precisely tuned to maintain safe air-fuel ratios without the need for additional ECU recalibration.

This system includes the Injen SuperNano-Web dry air filter, which offers superior filtration efficiency and airflow while remaining fully serviceable for a lifetime of use. Designed and manufactured in Pomona, California, this intake is dyno-proven to deliver substantial power gains while providing a deep, aggressive induction note under throttle.

• Dyno-proven gains of up to 33 HP and 35.1 lb-ft of torque
• High-grade 6061-T6 aluminum intake tubing with a durable black finish
• Patented MegaRam (MR) and Air Fusion tuning technologies
• Includes SuperNano-Web dry air filter (Part #X-1014-BB)
• Compatible with optional hydroshield (Part #1033BLK or 1033RED)
• CARB EO Number: D-476-8
• Injen Technology Limited Lifetime Warranty
• Manufacturer Part Number: SP6062BLK

Fits 2016-2024 Mazda MX-5 Miata models including Club, Grand Touring, Sport, and RF (2.0L).

Optimize your engine's airflow with the Injen SP Series Short Ram Intake. Engineered for the ND-chassis Mazda MX-5, this system replaces the restrictive factory airbox with a mandrel-bent 6061-T6 aluminum intake tube and a high-flow SuperNano-Web dry air filter. The polished finish provides a show-quality look under the hood, while the included custom-designed heat shield helps isolate the air intake from high engine bay temperatures.

This system utilizes Injen's patented MegaRam (MR) and Air Fusion technologies to maintain safe air/fuel ratios while delivering dyno-proven gains of up to 8 horsepower and 7 lb-ft of torque. The short ram design improves throttle response and provides a more aggressive engine note during acceleration. No additional tuning is required for installation.

• 6061-T6 polished aluminum intake tubing
• Fully serviceable SuperNano-Web dry air filter (X-1017-BB)
• Patented MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571)
• Patented Air Fusion Technology (Patent 7,721,669)
• Includes custom-designed heat shield and mounting hardware
• Made in Pomona, California, USA
• Manufacturer Part Number: SP6010P

Note: This product is not currently CARB exempt and is not legal for sale or use in California or on vehicles registered with the California DMV.

Fits 2016-2024 Mazda MX-5 Miata models including Sport, Club, Grand Touring, and RF editions (2.0L).

The Injen SP Series short ram intake system provides a direct path for increased airflow to your 2.0L engine. Constructed from mandrel-bent 6061-T6 aluminum, this system features Injen's patented MegaRam (MR) Technology and Air Fusion Technology to maintain safe air/fuel ratios while optimizing power delivery. The system includes a custom-designed heat shield to isolate the intake from engine bay heat, ensuring a cooler, denser air charge.

This intake is equipped with the fully serviceable SuperNano-Web dry air filter, providing high-efficiency filtration without the need for filter oil. On the dyno, this system has demonstrated gains of up to 8 horsepower and 7 lb-ft of torque, providing a more aggressive engine tone under full throttle while requiring no additional ECU tuning for operation.

• Manufacturer Part Number: SP6010BLK
• Material: Mandrel-bent 6061-T6 aluminum tubing
• Filter Type: Injen SuperNano-Web Dry Air Filter (Replacement part: X-1017-BB)
• Patented MegaRam (MR) and Air Fusion Technology for tuned performance
• Includes custom-designed application-specific heat shield
• Optional Hydroshield part numbers: 1035BLK or 1035RED
• Designed and manufactured in Pomona, California, USA
• Limited Lifetime Warranty

Fits 2013-2016 Dodge Dart GT, Limited, R/T, and SXT (2.4L).

The Injen SP Series cold air intake is a precision-tuned induction system designed to unlock performance from the 2.4L Tigershark engine. Utilizing Injen’s patented MegaRam (MR) Technology and Air Fusion process, this system optimizes airflow to deliver dyno-proven gains while maintaining safe air-fuel ratios. The intake is constructed from mandrel-bent 6061-T6 aluminum, replacing restrictive factory components with a smooth path for high-velocity air, resulting in improved throttle response and a throaty engine note under load.

• Performance Gains: Dyno-proven increases of up to 8 hp and 11 lb-ft of torque.
• Advanced Filtration: Equipped with a fully serviceable SuperNano-Web dry air filter (Replacement Part # X-1062-BB).
• Premium Materials: Lightweight 6061-T6 aluminum tubing with a durable polished finish.
• Installation: Direct bolt-on design requiring no additional tuning or ECU flashing.
• Manufacturing: Made in Pomona, California and backed by a Limited Lifetime Warranty.

Note: This product is not currently CARB exempt and is not available for purchase or use in California on any vehicle registered with the California Department of Motor Vehicles.

Fits 2013-2016 Dodge Dart GT, Limited, R/T, and SXT (2.4L Tiger Shark).

The Injen SP Series cold air intake is a high-performance induction system designed to maximize airflow for your Dodge Dart. Featuring Injen's patented MegaRam (MR) Technology and Air Fusion tuning, this system optimizes air-fuel ratios and provides consistent power gains across the entire RPM band. The intake tube is constructed from mandrel-bent 6061-T6 aluminum to ensure a smooth, uninterrupted path for incoming air while maintaining a clean engine bay aesthetic.

This kit includes a fully serviceable SuperNano-Web dry air filter, which offers superior filtration efficiency and increased surface area without the need for filter oil. Dyno-testing has shown gains of up to 8 HP and 11 lb-ft of torque, accompanied by a more aggressive engine tone under full throttle.

• 6061-T6 aluminum intake tubing with black finish
• Patented MR Technology for tuned airflow
• Includes SuperNano-Web dry air filter (Part # X-1062-BB)
• Dyno-proven gains of up to 8 hp and 11 lb-ft of torque
• No additional tuning required for operation
• Compatible with optional hydroshield (Part # 1031BLK)
• Manufacturer Part Number: SP5042BLK
• Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase or use in California.

Fits 2013-2016 Dodge Dart Limited, Rallye, SE, SXT, and SXT Sport models (2.0L).

Unlock hidden performance in your Dodge Dart with the Injen SP Series cold air intake. As Injen's flagship traditional aluminum system, the SP5041P is engineered to provide a smooth, uninterrupted path for intake air, replacing the restrictive factory air box with mandrel-bent 6061-T6 aluminum tubing. This system features Injen’s patented MegaRam (MR) Technology and Air Fusion tuning, which precisely regulates airflow to maintain safe air-to-fuel ratios while delivering dyno-proven gains of up to 9 hp and 7 lb-ft of torque.

This kit includes a fully serviceable Injen SuperNano-Web dry air filter, providing superior filtration and surface area without the need for filter oil. The polished finish provides a clean, professional aesthetic under the hood, complemented by an aggressive engine tone under full throttle. Designed as a direct bolt-on upgrade, this system requires no additional tuning for operation.

• Dyno-Proven Gains: Up to 9 hp and 7 lb-ft of torque
• Precision Construction: Mandrel-bent 6061-T6 aluminum intake tubing
• Patented Tuning: MegaRam (MR) Technology and Air Fusion ensure optimal A/F ratios
• Advanced Filtration: Includes SuperNano-Web dry air filter (Replacement Part # X-1017-BB)
• CARB Status: CARB EO # D-476-8 applies to 2013 model years only
• Origin: Made in Pomona, California, USA
• Warranty: Injen Technology Limited Lifetime Warranty
• MPN: SP5041P

Fits 2013-2016 Dodge Dart models (2.0L).

The Injen SP Series Cold Air Intake (SP5041BLK) is engineered to optimize your engine's breathing for increased performance. Featuring Injen's patented MegaRam (MR) Technology and Air Fusion tuning, this system provides a smooth, uninterrupted path for airflow while maintaining safe air/fuel ratios throughout the power band. Constructed from mandrel-bent 6061-T6 aluminum, the intake includes a high-performance SuperNano-Web dry air filter for superior filtration and flow without the need for oiling.

• Proven Performance: Dyno-tested gains of up to 9 hp and 7 lb-ft of torque.
• Premium Construction: Mandrel-bent 6061-T6 aluminum tubing with a durable black finish.
• Advanced Filtration: Includes a fully serviceable SuperNano-Web dry air filter (Replacement Part: X-1017-BB).
• Patented Tuning: Utilizes MegaRam (MR) Technology and Air Fusion for precise air/fuel ratio control.
• Installation: Direct bolt-on design requiring no additional tuning.
• Compliance: CARB EO #: D-476-8 (Applies to 2013 model years only).
• Origin: Designed and manufactured in Pomona, California, USA.
• Includes Injen Technology Limited Lifetime Warranty.

Fits 2013-2014 Dodge Dart Aero, Limited, Rallye, and SXT (1.4L Turbo).

The Injen SP Series cold air intake (SP5040BLK) is a high-performance induction system specifically tuned for the 1.4L Turbo Dodge Dart. Constructed from mandrel-bent 6061-T6 aluminum, this system utilizes Injen’s patented MegaRam (MR) Technology to precisely tune the intake tract. This ensures the engine receives optimal airflow while maintaining safe Air/Fuel ratios across the entire power band, providing dyno-proven gains of up to 9 hp and 10 lb-ft of torque without requiring a custom tune. The versatile design also allows the system to be converted into a Short Ram Intake (SRI).

This kit features the Injen SuperNano-Web dry air filter (X-1049-BB), which uses a proprietary synthetic media to provide superior filtration and airflow without the need for filter oil. The intake system is finished in a durable black coating and includes heavy-duty stainless steel band clamps for a secure, leak-free installation to factory mounting points.

• Dyno-proven gains: up to 9 hp and 10 lb-ft of torque
• Patented MR Technology (Patents 7,359,795 and 7,669,571) for MAF sensor tuning
• Mandrel-bent 6061-T6 aluminum tubing for unrestricted flow
• SuperNano-Web dry air filter (Replacement: X-1049-BB)
• CARB EO #: D-476-8 (Applies to 2013 model years only)
• Direct bolt-on installation with included hardware
• Made in Pomona, California, USA
• Manufacturer Part Number: SP5040BLK

Fits 2015-2019 Fiat 500 models, including Abarth, Turbo, Pop, Lounge, and 1957 Retro Edition, equipped with the 1.4L Turbo engine.

The Injen SP Series short ram intake is a high-performance upgrade designed to replace the restrictive factory airbox and improve engine breathing. This system features Injen's patented MegaRam (MR) Technology, which tunes the intake tract to maintain safe air-to-fuel ratios while maximizing power delivery. Constructed from mandrel-bent 6061-T6 aluminum, the intake provides a smooth, uninterrupted path for airflow, resulting in dyno-proven gains of up to 9 hp and 13 lb-ft of torque.

Equipped with a fully serviceable Injen SuperNano-Web dry air filter, this kit offers superior filtration without the need for filter oil. The short ram design not only enhances throttle response but also delivers an aggressive, throaty engine tone under load. Every kit is manufactured in Pomona, California, and includes all necessary hardware for a straightforward installation that requires no additional ECU tuning.

• 6061-T6 aluminum intake tubing with a polished finish
• Patented MegaRam (MR) Technology for tuned performance
• SuperNano-Web dry air filter (Replacement Part: X-1088-BB)
• Dyno-proven gains of up to 9 hp and 13 lb-ft of torque
• Manufacturer Part Number: SP5024P
• Injen Technology Limited Lifetime Warranty
• Note: Not current CARB exempt; not for sale or use in California

Fits 2014 Fiat 500L models (1.4L).

The Injen SP Series cold air intake (SP5023BLK) provides an optimized airflow solution for the 2014 Fiat 500L. Constructed from mandrel-bent 6061-T6 aluminum, this system utilizes Injen’s patented MegaRam (MR) Technology and Air Fusion tuning to achieve dyno-proven gains of up to 7 hp and 7 lb-ft of torque. These patented processes allow the intake to be specifically tuned to the vehicle's factory air/fuel ratios, delivering performance without the need for an aftermarket ECU tune.

The system features a versatile convertible design, allowing it to be installed as a full cold air intake or configured as a short ram intake depending on preference. It comes equipped with a SuperNano-Web dry air filter, providing high-efficiency filtration and improved surface area for better breathability. Proudly manufactured in Pomona, California, this intake is finished in a durable black powder coat and is backed by a Limited Lifetime Warranty.

• Direct fit for 2014 Fiat 500L 1.4L (All trims)
• Mandrel-bent 6061-T6 aluminum tubing for smooth, unrestricted airflow
• Patented MR Technology and Air Fusion for tuned performance gains
• Convertible design: Cold Air Intake or Short Ram Intake configuration
• Includes fully serviceable SuperNano-Web dry air filter (MPN: X-1014-BB)
• CARB EO #: D-476-8
• All necessary hardware included for a bolt-on installation
• Manufacturer Part Number: SP5023BLK

Fits 2012-2017 Fiat 500 models (1.4L), including Abarth, Turbo, Sport, Lounge, Pop, and Easy trims.

The Injen SP Series short ram intake delivers improved throttle response and an aggressive engine note by replacing restrictive factory induction components with precision-engineered 6061-T6 aluminum piping. This system utilizes Injen's patented MegaRam (MR) Technology to tune the intake for optimal airflow and velocity, ensuring significant power gains while maintaining safe air-fuel ratios without the need for an aftermarket tune.

Equipped with the SuperNano-Web dry air filter, this kit provides superior filtration and increased surface area for high-volume flow. The filter is fully serviceable, eliminating the need for replacements. Designed and manufactured in Pomona, California, this kit includes all necessary hardware for a straightforward installation to factory mounting points.

• 6061-T6 aluminum intake tubing with polished finish
• Patented MegaRam (MR) Technology for air-fuel ratio stability
• Includes SuperNano-Web dry air filter (MPN: X-1010-BB)
• Dyno-proven gains of up to 3 hp and 4 lb-ft of torque
• CARB EO #: D-476-8 (Valid for 2012-2013 models only)
• Direct bolt-on design with no additional tuning required
• Manufacturer Part Number: SP5022P
• Injen Technology Limited Lifetime Warranty

Fits 2012-2017 Fiat 500 models including Abarth, Turbo, Sport, Pop, and Lounge (1.4L).

The Injen SP Series Short Ram Intake is engineered to optimize your engine's performance through patented MegaRam (MR) Technology. By precisely tuning the intake system to maintain safe air-fuel ratios while maximizing airflow, Injen delivers dyno-proven gains of up to 3 hp and 4 lb-ft of torque. Constructed from mandrel-bent 6061-T6 aluminum, the SP5022BLK provides a smooth, unrestricted path for air, resulting in improved throttle response and an aggressive, throaty engine tone under load.

This system features the SuperNano-Web dry air filter, which offers high-flow performance and exceptional filtration without the maintenance requirements of oiled filters. Designed as a direct bolt-on upgrade, this kit utilizes factory mounting points and requires no additional aftermarket tuning.

• 6061-T6 aluminum intake tubing with a durable black finish
• Patented MegaRam (MR) Technology for optimized MAF sensor calibration
• Includes a fully serviceable Injen SuperNano-Web dry air filter (MPN: X-1010-BB)
• CARB EO #: D-476-8 (Legal for 2012-2013 model years only)
• Direct bolt-on design for straightforward installation
• Compatible with optional hydroshield (MPN: 1035BLK or 1035RED)
• Manufacturer Part Number: SP5022BLK
• Proudly manufactured in Pomona, California, USA

Fits 2012-2014 Fiat 500 Abarth, Abarth Cabrio, and Turbo models (1.4L).

The Injen SP5021P SP Series intake system is engineered to provide your turbocharged 1.4L engine with an unrestricted air path for improved throttle response and increased output. This short ram system utilizes Injen’s patented MegaRam (MR) Technology to tune the 6061-T6 aluminum intake tube, ensuring the vehicle maintains safe air-fuel ratios across the power band without the need for aftermarket tuning. By replacing the restrictive factory airbox with a mandrel-bent polished aluminum tube and a custom-designed heat shield with cover, this kit significantly reduces intake restrictions and manages engine bay heat soak.

Performance is further enhanced by the included SuperNano-Web dry air filter. This fully serviceable media provides high-flow capabilities and exceptional filtration without the use of oil. On the dyno, this system has demonstrated gains of up to 8 hp and 10 lb-ft of torque, while delivering a more aggressive, throaty engine tone under full throttle.

• Mandrel-bent 6061-T6 aluminum intake tubing with a polished finish
• Patented MegaRam (MR) and Air Fusion technology for precise A/F ratio tuning
• Custom heat shield with cover specifically designed for the Fiat 500 engine bay
• Serviceable SuperNano-Web dry air filter (Replacement Part: X-1058-BB)
• Dyno-proven gains of up to 8 hp and 10 lb-ft of torque
• CARB EO #: D-476-8 (Applies to 2012-2013 model years)
• Complete bolt-on installation with no additional tuning required
• Made in Pomona, California, USA
• Manufacturer Part Number: SP5021P

Fits select 2012-2014 Fiat 500 Abarth, Abarth Cabrio, and Turbo models (1.4L).

The Injen Technology SP Series is a premier aluminum short ram intake system engineered for the 1.4L turbocharged Fiat 500. This system features a mandrel-bent 6061-T6 aluminum intake tube that provides a smooth, unrestricted path for airflow to reach the turbocharger. The soul of this intake lies in Injen’s patented MegaRam (MR) Technology, which tunes the intake tract to maintain safe air-fuel ratios while maximizing performance gains without the need for an aftermarket ECU tune.

Designed to perform under pressure, this kit includes a custom-engineered heat shield and cover to isolate the intake from heat soak. The system is equipped with a SuperNano-Web dry air filter, which provides high-flow filtration without the maintenance required by oiled filters. Expect an aggressive, throaty engine tone under full throttle and dyno-verified performance improvements across the power band.

• Manufacturer Part Number: SP5021BLK
• Material: 6061-T6 Aluminum
• Finish: Wrinkle Black
• Filter Type: SuperNano-Web Dry Filter (Replacement Part: X-1058-BB)
• Performance: Dyno-proven gains of up to 8 hp and 9 lb-ft of torque
• CARB Status: CARB EO# D-476-8 (Applies to 2012-2013 models only)
• Manufacturing: Made in Pomona, California, USA
• Warranty: Limited Lifetime Warranty