Fits 2006-2011 Lexus GS300 and GS350 Base models.

The Invidia Q300 Axle-Back Exhaust (MPN: HS06LGSGT3) provides a refined acoustic profile and improved exhaust flow for the third-generation Lexus GS. This system is engineered as a direct bolt-on upgrade, replacing the factory rear mufflers to optimize backpressure while maintaining a mature, deep tone. Designed for enthusiasts seeking a performance edge without intrusive cabin drone, the Q300 series balances luxury refinement with a more aggressive exhaust note under acceleration.

• Series: Q300
• Part Number: HS06LGSGT3
• Installation: Direct bolt-on to factory mounting points and mid-pipe
• Construction: Flat-bottom muffler design for optimized aerodynamics and ground clearance

Fits 2007-2010 Honda Fit Base and Sport models.

Improve your vehicle's exhaust flow and sound profile with the Invidia cat-back exhaust system. This system replaces the restrictive factory exhaust from the catalytic converter back, utilizing 50mm mandrel-bent tubing to maintain consistent diameter through every bend. This design reduces backpressure and allows the engine to breathe more efficiently throughout the RPM range.

Constructed for durability and a precise fit, the system bolts directly to factory mounting points. The rear is finished with a prominent 101mm polished tip that provides a clean, aggressive aesthetic to the rear of the vehicle.

• Piping Diameter: 50mm
• Tip Diameter: 101mm
• System Type: Cat-back
• Installation: Direct bolt-on replacement
• Manufacturer Part Number: HS06HF1GTP

Fits 2006-2011 Honda Civic Si and 2008 MUGEN Si (4-door sedan models).

The Invidia Racing N1 cat-back exhaust system is engineered for drivers seeking maximum exhaust flow and a distinct, aggressive racing tone. Constructed from high-quality SUS304 stainless steel, this system features 76mm (approx. 3-inch) mandrel-bent piping to minimize backpressure and optimize power delivery across the RPM range. The N1 series is inspired by endurance racing, utilizing a straight-through canister design to improve engine efficiency.

This specific system is finished with a signature burnt titanium tip for a premium aesthetic and includes all necessary hardware for installation on 4-door sedan chassis. It is a direct-fit replacement for the factory exhaust, mounting to the original hanger locations.

• Series: Racing N1
• Piping Diameter: 76mm
• Tip Material: Burnt Titanium
• Tubing Material: SUS304 Stainless Steel
• Exit Type: Single Rear Exit
• Chassis Fitment: 4-Door Sedan ONLY
• Manufacturer Part Number: HS06HC4STT

Fits 2006-2011 Honda Civic Si and 2008 MUGEN Si sedans.

The Invidia N1 cat-back exhaust system is engineered for drivers seeking to improve exhaust flow and achieve a deep, racing-inspired tone. Constructed with 70mm mandrel-bent piping, this system minimizes backpressure to help maximize power output. The signature N1 series canister features a straight-through design and is finished with a burnt titanium tip for a distinct, high-performance aesthetic.

• 70mm piping diameter for increased exhaust gas velocity
• N1 series canister design with polished finish
• Precision-made burnt titanium tip
• Direct bolt-on installation to factory mounting points
• Includes all necessary gaskets and hardware for installation
• Manufacturer Part Number: HS06HC4GTT

Fits 2006-2011 Honda Civic Si and 2008 MUGEN Si 4-door sedans.

The Invidia Q300 cat-back exhaust system is designed for the 8th-generation Honda Civic Si owner who demands performance without the excessive noise of a race-style system. The Q300 series is characterized by its flat-bottom muffler design, which provides a refined, deep exhaust note while optimizing high-speed aerodynamic flow. Constructed from mandrel-bent stainless steel, this system minimizes backpressure and improves exhaust velocity for better throttle response.

• Specifically designed for the 4-door sedan chassis (HS06HC4G3T)
• Mandrel-bent stainless steel piping for maximum durability and flow
• Flat-bottom Q300 muffler optimizes ground clearance and aerodynamics
• Polished titanium tips for a premium, high-performance look
• Direct bolt-on installation using factory-style mounting points

Fits 2006-2011 Honda Civic Si 4-door sedans, including the 2008 MUGEN Si.

The Invidia Q300 cat-back exhaust system is engineered to provide a significant performance upgrade for the 8th generation Civic Si sedan without the harsh, raspy tone often associated with aftermarket systems. The Q300 features a unique flat-bottom muffler design that aids in high-speed aerodynamics while the internal continuous strand glass wool packing delivers a deep, mellow exhaust note. Built from mandrel-bent SUS304 stainless steel, this system optimizes exhaust flow and reduces backpressure for improved throttle response and power gains.

• Constructed from high-quality SUS304 stainless steel for long-term durability and corrosion resistance
• Mandrel-bent piping ensures consistent diameter throughout the bends for maximum flow
• Cast flanges provide a precise, leak-free fit to factory or aftermarket headers
• Robotic TIG welding for superior strength and a clean aesthetic finish
• Includes all necessary gaskets and hardware for a straightforward bolt-on installation
• Manufacturer Part Number: HS06HC4G3S

Fits 2006-2011 Honda Civic Si (2-Door).

The Invidia Racing N1 cat-back exhaust system is engineered to provide maximum exhaust flow and improved throttle response for the 8th Gen Honda Civic Si coupe. Featuring large-diameter 76mm (3-inch) mandrel-bent piping, this system minimizes backpressure, making it an ideal choice for high-output naturally aspirated K-series builds or forced induction applications.

• Series: Racing N1
• Piping Diameter: 76mm
• Tip Finish: Burnt Titanium
• Chassis Fitment: 2-Door Coupe only
• Installation: Bolts to factory mounting points
• Manufacturer Part Number: HS06HC2STT

This system utilizes a straight-through canister design to deliver the signature deep, aggressive N1 racing tone. Constructed from high-quality materials with precision welds, the kit includes the necessary hardware for a secure, direct-fit installation.

Fits 2006-2011 Honda Civic Si (2-door Coupe models only).

The Invidia Racing Series cat-back exhaust system is engineered for the 8th-generation Honda Civic Si enthusiast seeking maximum exhaust flow and a distinct, aggressive tone. Featuring high-quality 70mm mandrel-bent piping, this system minimizes backpressure and optimizes exhaust gas velocity, making it an ideal choice for naturally aspirated or forced induction builds.

This system is finished with a signature burnt titanium tip, providing a high-performance look and excellent corrosion resistance. Designed as a direct bolt-on replacement for the factory exhaust on 2-door models, it includes the necessary hardware for a secure installation to existing mounting points.

• Manufacturer Part Number: HS06HC2GTT
• Piping Diameter: 70mm
• Tip Style: Burnt Titanium
• Series: Racing Series Cat-Back
• Construction: Mandrel-bent stainless steel piping
• Fitment: 2006-2011 Honda Civic Si 2dr

Fits 2006-2011 Honda Civic Si.

The Invidia Q300 cat-back exhaust system is designed for the enthusiast looking to optimize exhaust flow and engine efficiency without the harsh volume of a race-spec system. Constructed from mandrel-bent SUS304 stainless steel, the Q300 features a specialized flat bottom muffler design that improves high-speed aerodynamics while producing a deep, refined exhaust note. The system is finished with signature burnt titanium tips for a distinct, high-performance appearance.

This cat-back system is a direct bolt-on upgrade, utilizing factory mounting points and hardware locations for a precise fit. The high-quality stainless steel construction ensures long-term resistance to corrosion and heat stress under spirited driving conditions.

• Series: Q300
• System Type: Cat-Back
• Material: SUS304 Stainless Steel
• Tip Finish: Burnt Titanium
• Piping Type: Mandrel-Bent
• Manufacturer Part Number: HS06HC2G3T

Fits 2006-2011 Honda Civic Si (2-Door Coupe models only).

The Invidia Q300 cat-back exhaust system is engineered to optimize exhaust flow and provide a refined, performance-oriented tone for the 8th generation Civic Si. Constructed from mandrel-bent SUS304 stainless steel, this system minimizes backpressure and improves throttle response. The Q300 series is distinguished by its flat-bottom muffler design, which aids in vehicle aerodynamics while housing continuous piping for maximum efficiency.

• Manufactured from high-quality SUS304 stainless steel for corrosion resistance
• Mandrel-bent tubing ensures consistent diameter throughout the exhaust path
• Polished rolled stainless steel tips for a clean, premium aesthetic
• Flat-bottom muffler design improves underbody airflow
• Includes all necessary hardware for a direct-fit installation
• Manufacturer Part Number: HS06HC2G3S

Fits 2002-2008 Subaru Impreza WRX, WRX STI, and Forester Sports 2.5 XT.

The Invidia Polished Divorced Waste Gate Downpipe with High Flow Cat (HS05SW1DPC) is engineered to maximize exhaust efficiency for the EJ-series turbo engine. By utilizing a divorced wastegate design, this downpipe separates the exhaust gases exiting the turbine from those exiting the wastegate flapper. This separation reduces turbulence at the turbo discharge, allowing for smoother flow, improved boost control, and faster spool-up compared to the restrictive factory component.

• High-Flow Catalytic Converter: Minimizes backpressure while maintaining exhaust scavenging compared to the OEM unit.
• Divorced Wastegate Design: Dedicated passage for wastegate gases prevents turbulence at the turbocharger exit.
• Polished Finish: Provides high-grade corrosion resistance and a clean, professional aesthetic in the engine bay.
• Direct Fitment: Designed for a precise fit on the specified Subaru models using factory mounting locations.

Each unit is manufactured to tight tolerances to ensure a reliable seal and long-term performance under high-heat conditions.

Fits 2005-2006 Subaru Legacy GT.

Upgrade your vehicle's performance and acoustic profile with the Invidia Stainless Steel Quad Tip Cat-Back Exhaust. Engineered specifically for the 2005-2006 Subaru Legacy GT, this system replaces the restrictive factory exhaust from the catalytic converter back, reducing backpressure and improving exhaust scavenging for better throttle response.

Constructed from high-grade stainless steel, this cat-back system is designed to withstand the elements while maintaining a premium finish. The quad-tip exit provides a sophisticated, aggressive look that fills out the factory bumper cutouts perfectly. As a direct-fit component, it utilizes factory-style hangers for a straightforward installation process.

• Premium stainless steel construction for maximum corrosion resistance
• Mandrel-bent tubing ensures uniform diameter and smooth exhaust flow
• Quad polished tips for an enhanced performance aesthetic
• Designed as a direct bolt-on replacement for the OE cat-back system
• Manufacturer Part Number: HS05SL1GT3

Fits 2005-2006 Mini Cooper S.

The Invidia Cat-Back Exhaust system is engineered to optimize exhaust gas velocity and provide a distinct, aggressive tone for the 2005-2006 Mini Cooper S. This system utilizes 60mm mandrel-bent piping to reduce backpressure and turbulence compared to the restrictive factory setup. The exhaust path is completed by a premium 80mm titanium burnt tip, offering a high-performance look and excellent corrosion resistance.

Designed as a direct-fit replacement, this cat-back system improves the overall driving experience with sharper throttle response and a deep, resonant exhaust note. Every component is manufactured to strict tolerances to ensure a straightforward installation using factory-style mounting points.

• Piping Diameter: 60mm
• Tip Diameter: 80mm
• Tip Material: Titanium (Burnt Finish)
• System Type: Cat-Back
• Manufacturer Part Number: HS05MCSGTT

Fits select 2005-2013 Subaru Forester XT Limited, Premium, and Touring models.

The Invidia G200 Series cat-back exhaust system is engineered to optimize exhaust flow and reduce backpressure for the Subaru Forester XT. By replacing the restrictive factory tubing from the catalytic converter back, this system allows for improved engine efficiency and a more pronounced exhaust note. Constructed from durable stainless steel, the G200 is built to withstand the rigors of high-heat operation and road debris while maintaining its structural integrity.

This system features mandrel-bent piping and a signature rolled tip for a refined, professional appearance. It is designed as a direct-fit component that utilizes factory-style mounting points, facilitating a straightforward installation for enthusiasts looking to upgrade their Forester's performance and acoustic profile.

• System Type: Cat-back exhaust
• Series: Invidia G200
• Material: Stainless steel construction
• Tip Style: Single rolled tip
• Configuration: Replaces OEM exhaust from catalytic converter back
• Manufacturer Part Number: HS04SFRG2S

Fits 2003-2006 Mitsubishi Lancer Evolution models.

The Invidia N1 Cat-Back Exhaust system is designed to maximize exhaust flow and reduce backpressure for the Mitsubishi Evo platform. By utilizing high-flow 76mm (3-inch) mandrel-bent piping, this system improves turbo spool-up and throttle response throughout the RPM range. The N1 series is known for its deep, race-inspired exhaust note and straight-through canister design.

Constructed from premium SUS304 stainless steel for long-term durability and corrosion resistance, the system features a signature burnt titanium tip for a distinct aesthetic. This exhaust is engineered as a direct bolt-on replacement for the factory unit, mounting to existing chassis hangers and including all necessary hardware for a secure installation.

• Series: N1 Cat-Back Exhaust
• Manufacturer Part Number: HS03ML8GTT
• Piping Diameter: 76mm
• Tip Material: Polished Titanium
• System Material: SUS304 Stainless Steel
• Fitment: Direct bolt-on for 2003-2006 Lancer Evolution

Fits 2003-2004 Mini Cooper S models.

Improve the exhaust flow and acoustic profile of your supercharged R53 with the Invidia Cat-Back Exhaust system. This performance upgrade replaces the restrictive factory exhaust with 60mm mandrel-bent piping designed to reduce backpressure and optimize exhaust gas velocity. The system is finished with a signature 80mm burnt titanium tip, providing a high-end motorsport aesthetic and a deep, aggressive tone without excessive drone.

• 60mm diameter piping for increased flow capacity
• 80mm single-wall titanium tip with burnt blue finish
• Direct bolt-on fitment to factory hangers and mounting points
• Mandrel-bent construction to maintain consistent inner diameter through curves
• Manufacturer Part Number: HS03MCSGTT

Fits 2003-2006 Infiniti G35 Base models.

The Invidia Gemini cat-back exhaust system is engineered to reduce backpressure and improve the exhaust note of your Infiniti G35. This system utilizes mandrel-bent stainless steel tubing to maintain a consistent diameter throughout the bends, ensuring smooth gas flow and increased efficiency compared to the restrictive OEM setup. Designed as a direct-fit replacement, it mounts to factory locations and features premium rolled stainless steel tips for a polished, aggressive finish.

• High-quality stainless steel construction for corrosion resistance
• Rolled stainless steel tips for a refined aesthetic
• Mandrel-bent piping ensures maximum exhaust flow
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: HS03IG3GIS

Fits 2003-2006 Infiniti G35 Base models.

The Invidia Gemini cat-back exhaust system is a high-performance upgrade designed to replace the restrictive factory piping on your Infiniti G35 Coupe. Engineered for improved exhaust flow and a resonant, deep tone, the Gemini series utilizes a tuned layout to minimize backpressure. This system is constructed for long-term durability and features signature rolled titanium tips that provide a distinct, high-end aesthetic while resisting corrosion.

• Series: Gemini
• System Type: Cat-Back Exhaust
• Tip Material: Rolled Titanium
• Chassis Compatibility: V35 Coupe
• Manufacturer Part Number: HS03IG3GID
• Designed to bolt directly to factory mounting locations for straightforward installation

Fits 2003-2008 Infiniti FX35 and FX45 Base models.

The Invidia Gemini cat-back exhaust system is engineered to optimize exhaust flow and enhance the acoustic profile of the Infiniti FX platform. This system replaces the restrictive factory piping with a high-flow dual design, utilizing mandrel-bent T304 stainless steel to minimize backpressure and improve scavenging. The Gemini series is specifically tuned to deliver a deep, sporty resonance while maintaining comfortable cabin sound levels during daily driving.

• Fabricated from premium T304 stainless steel for superior corrosion resistance and longevity
• Mandrel-bent tubing ensures consistent diameter throughout bends for maximum flow
• Features dual rolled titanium tips with a signature heat-treated blue finish
• Direct bolt-on design utilizes factory mounting locations for a precise fit
• Cast flanges for high-strength connection and leak-free performance
• Manufacturer Part Number: HS03IFXGID

The Invidia Stock Downpipe to 3-inch Catback Adapter (HS02SWIAPE) is a precision-engineered solution for Subaru owners mating mismatched exhaust components. This adapter is specifically designed to bridge the gap between the factory downpipe—which utilizes a flared donut gasket connection—and a 3-inch (76mm) flat-flange aftermarket catback exhaust system.

• Prevents exhaust leaks common when mating OEM donut gaskets to flat aftermarket flanges
• Ensures a secure, flush seal for optimal exhaust flow and backpressure management
• Simple bolt-on installation using factory mounting points
• Durable construction designed to withstand high-heat cycles and corrosive exhaust gases
• Manufacturer Part Number: HS02SWIAPE

Whether you are installing an Invidia Q300, N1, or another 3-inch catback system while retaining your stock downpipe, this adapter provides the necessary transition to maintain system integrity without the need for custom fabrication or welding.

Fits 2008-2021 Subaru WRX and STI.

The Invidia HS02SWIAPD 3" Downpipe to 2.5" Exhaust Adapter is the professional solution for eliminating exhaust leaks when mating mismatched piping diameters. When upgrading to a high-flow 3-inch downpipe while retaining the factory 2.5-inch cat-back exhaust (or an aftermarket street-spec system), the flange interface often fails to seal properly. This adapter bridges that gap, providing a secure, flared transition that ensures optimal exhaust flow without the soot-staining leaks common with makeshift gasket stacking.

Precision-manufactured to withstand the high thermal loads of turbocharged EJ and FA engines, this adapter is a necessary component for a clean, reliable exhaust installation. It maintains correct backpressure characteristics and ensures your exhaust system remains quiet and efficient at the flange junction.

• Manufacturer Part Number: HS02SWIAPD
• Inlet Diameter: 3 inches
• Outlet Diameter: 2.5 inches
• Construction: High-grade stainless steel for corrosion resistance
• Application: Connects 3-inch aftermarket downpipes to 2.5-inch cat-back exhaust systems

Fits 2002-2007 Subaru Impreza WRX and WRX STI (including Limited and TR models).

The Invidia N1 Racing Cat-Back Exhaust is engineered for enthusiasts seeking maximum exhaust flow and a signature deep, aggressive tone for the GD-chassis Subaru. Built with 76mm mandrel-bent stainless steel piping, this system minimizes backpressure to optimize turbo spool-up and power delivery. The N1 Racing series features a straight-through canister design for reduced weight and improved performance compared to the restrictive factory exhaust system.

• Series: N1 Racing
• Piping Diameter: 76mm
• Tip Finish: Polished Stainless Steel
• Construction: Mandrel-bent SUS304 Stainless Steel
• Fitment: Bolts to factory mounting points with included hardware
• Manufacturer Part Number: HS02SW1GTR

Fits 2002-2007 Subaru Impreza WRX and WRX STI (including Limited and TR models).

The Invidia N1 Regular cat-back exhaust system is engineered for the GD-chassis Subaru enthusiast looking to reduce backpressure and enhance the signature boxer engine note. Constructed from high-quality stainless steel with 76mm (3-inch) mandrel-bent piping, this system provides a significant increase in exhaust flow efficiency over the factory equipment, aiding in turbo spool and throttle response.

• 76mm (3-inch) diameter piping for maximized exhaust gas velocity.
• N1-style canister designed for weight reduction and high-flow performance.
• Polished stainless steel construction with a durable stainless steel tip.
• Mandrel-bent tubing maintains a consistent diameter for smooth airflow.
• Complete bolt-on kit for direct replacement of the OE exhaust.
• Manufacturer Part Number: HS02SW1GTP

Fits 2002-2007 Subaru Impreza WRX and STI models (including WRX Limited, WRX TR, and STI Limited).

The Invidia N1 Racing series cat-back exhaust is designed for enthusiasts seeking maximum exhaust velocity and a signature aggressive boxer rumble. Constructed with 76mm mandrel-bent piping, this system minimizes flow restrictions to help the turbo spool faster and improve overall power across the RPM range. The N1 Racing design utilizes a straight-through canister for optimal weight savings and flow, finished with a distinct titanium tip for a high-end performance aesthetic.

• 76mm (approx. 3-inch) mandrel-bent piping for superior exhaust flow
• N1 Racing series single-exit configuration
• High-quality construction with a burnt titanium tip finish
• Includes necessary hardware for a direct bolt-on installation
• Manufacturer Part Number: HS02SW1GRT

Fits 2002-2007 Subaru Impreza WRX and WRX STI (2.0L / 2.5L).

The Invidia Q300 series cat-back exhaust system is engineered for the Subaru enthusiast seeking a balance between performance gains and a refined exhaust note. Constructed from 76mm (3-inch) mandrel-bent T304 stainless steel, this system maximizes exhaust flow and reduces backpressure to improve turbo response and power delivery. Unlike more aggressive systems, the Q300 features a specialized flat-bottom muffler design that optimizes high-speed aerodynamics while providing a deep, resonant boxer rumble without excessive cabin drone.

• Series: Q300
• Piping Diameter: 76mm
• Material: T304 Stainless Steel
• Muffler Design: High-flow flat-bottom for aerodynamic efficiency
• Installation: Bolts to factory mounting points with included hardware
• Manufacturer Part Number: HS02SW1G3S

Fits 2002-2007 Subaru Impreza WRX and WRX STI (including Limited and TR models).

The Invidia G200 Series cat-back exhaust system is designed for the Subaru enthusiast looking for a balance of high-flow performance and a refined, deep exhaust note. Engineered with 76mm (3-inch) mandrel-bent stainless steel piping, this system minimizes backpressure to improve turbo spool and power delivery across the RPM range. The G200 muffler is topped with a signature rolled titanium tip for a distinct, high-end look and weight reduction at the rear of the vehicle.

This exhaust system is built for longevity and precise fitment, utilizing factory-style hangers and thick flanges to ensure a leak-free seal. It provides a significant upgrade over the restrictive factory piping while maintaining a sound profile that is aggressive under throttle but manageable during daily driving.

• Part Number: HS02SW1G2T
• Piping Diameter: 76mm (3.0 in)
• Tip Material: Titanium
• Tip Style: Single rolled burnt-blue tip
• Tubing Material: Mandrel-bent stainless steel
• Installation: Bolts to factory mounting points

Fits 2003-2009 Nissan 350Z (Base, Enthusiast, Performance, Touring, Track, 35th Anniversary, Grand Touring, and Nismo).

The Invidia N1 Regular Y-Pipe Back Exhaust System is engineered to optimize exhaust gas velocity and reduce backpressure for the 2003-2009 Nissan 350Z. Featuring 60mm mandrel-bent piping, this system replaces the restrictive factory mid-pipe and rear muffler to improve engine efficiency and provide the signature aggressive N1 acoustic profile.

Built for durability and precise fitment, this exhaust utilizes factory mounting points for a straightforward installation. The N1 series canister-style muffler is designed to maximize flow while delivering a deep, resonant tone throughout the RPM range.

• Series: N1 (Regular)
• System Type: Y-Pipe Back
• Piping Diameter: 60mm
• Direct bolt-on installation using factory hangers
• Manufacturer Part Number: HS02N3ZGTP

Fits select 2003-2009 Nissan 350Z including Base, Enthusiast, Touring, Track, and Nismo submodels.

The Invidia Gemini Cat-Back Exhaust offers a significant upgrade to your Nissan 350Z, engineered to enhance exhaust flow while delivering a refined, aggressive tone. As a direct bolt-on replacement for the factory system, the Gemini series features a specialized resonator design that maintains high-performance output without excessive cabin drone. This specific configuration is finished with single layer titanium tips, providing a high-end aesthetic and excellent heat resistance.

• Full cat-back exhaust system for improved exhaust scavenging and performance
• Single layer titanium tips with a burnt-blue finish
• Precision mandrel-bent piping for maximum flow and durability
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: HS02N3ZGIT

Fits select 2003-2009 Nissan 350Z (Base, Enthusiast, Grand Touring, Nismo, Performance, Touring, and Track).

The Invidia Gemini Series cat-back exhaust system is designed to reduce backpressure and optimize exhaust gas flow for the Nissan 350Z's V6 engine. Built with high-quality mandrel-bent stainless steel piping, this system provides a significant improvement in exhaust tone, delivering a deep, tuned resonance without the harshness of a straight-pipe setup. The rolled stainless steel tips offer a refined aesthetic that matches the factory body lines while ensuring long-term durability against corrosion and heat.

• Series: Gemini
• Material: Polished Stainless Steel
• Tip Style: Rolled Stainless Steel
• Part Number: HS02N3ZGIS
• Hardware: Includes necessary gaskets and bolts for installation
• Installation: Bolts to factory mounting points and mid-pipe hangers

Fits 2003-2009 Nissan 350Z across all trim levels including Base, Enthusiast, Touring, Performance, Track, 35th Anniversary, Grand Touring, and Nismo.

The Invidia Gemini Cat-back Exhaust system is engineered to optimize exhaust flow and provide a distinct, aggressive tone for the Z33 chassis. This system replaces the restrictive factory exhaust from the catalytic converters back, utilizing high-quality piping and a specialized muffler design to improve throttle response and power delivery. The system is finished with signature rolled titanium tips, providing a burnt-blue aesthetic and durable performance.

• Manufacturer Part Number: HS02N3ZGID
• Product Series: Gemini
• System Type: Cat-back
• Tip Style: Rolled Titanium
• Fitment: Direct bolt-on to factory mounting points
• Includes all necessary hardware and gaskets for installation