Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1552 products
1552 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$419.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1997-2004 | Ford | Expedition | Eddie Bauer |
| 2004 | Ford | Expedition | NBX |
| 2004 | Ford | Expedition | XLS |
| 1997-2004 | Ford | Expedition | XLT |
| 2004 | Ford | Expedition | XLT Sport |
| 1997-2000 | Ford | F-150 | Base |
| 2000-2001 | Ford | F-150 | Harley-Davidson Edition |
| 2001-2003 | Ford | F-150 | King Ranch |
| 1997-2003 | Ford | F-150 | Lariat |
| 1997-2003 | Ford | F-150 | XL |
| 1997-2003 | Ford | F-150 | XLT |
| 2004 | Ford | F-150 Heritage | XL |
| 2004 | Ford | F-150 Heritage | XLT |
| 1997-1999 | Ford | F-250 | Base |
| 1997-1999 | Ford | F-250 | Lariat |
| 1997-1999 | Ford | F-250 | XL |
| 1997-1999 | Ford | F-250 | XLT |
| 1998-1999 | Lincoln | Navigator | Base |
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
User 1Installation Instructions
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2025 | Jeep | Grand Cherokee | Altitude |
| 2023-2025 | Jeep | Grand Cherokee | Altitude X |
| 2022-2025 | Jeep | Grand Cherokee | Laredo |
| 2024-2025 | Jeep | Grand Cherokee | Laredo A |
| 2023-2025 | Jeep | Grand Cherokee | Laredo X |
| 2022-2025 | Jeep | Grand Cherokee | Limited |
| 2022-2025 | Jeep | Grand Cherokee | Overland |
| 2022-2025 | Jeep | Grand Cherokee | Summit |
| 2022-2025 | Jeep | Grand Cherokee | Summit Reserve |
| 2022 | Jeep | Grand Cherokee | Trailhawk |
| 2021-2025 | Jeep | Grand Cherokee L | Altitude |
| 2023-2025 | Jeep | Grand Cherokee L | Altitude X |
| 2021-2025 | Jeep | Grand Cherokee L | Laredo |
| 2023-2025 | Jeep | Grand Cherokee L | Laredo X |
| 2021-2025 | Jeep | Grand Cherokee L | Limited |
| 2021-2025 | Jeep | Grand Cherokee L | Overland |
| 2021-2025 | Jeep | Grand Cherokee L | Summit |
| 2021,2023-2025 | Jeep | Grand Cherokee L | Summit Reserve |
$369.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
User 1Installation Instructions
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024,2026 | Ram | 1500 | Big Horn |
| 2026 | Ram | 1500 | Express |
| 2019-2024 | Ram | 1500 | HFE |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2020 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024,2026 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2019-2024,2026 | Ram | 1500 | Tradesman |
| 2026 | Ram | 1500 | Warlock |
$369.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
User 1Installation Instructions
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2019-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
User 1Installation Instructions
Installation Instructions
- EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
- K&N Million Mile Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2019-2024 | Ram | 1500 | Tradesman |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
User 1Installation Instructions
Installation Instructions
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$422.99
K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your Durango, Grand Cherokee, & Grand Cherokee WK, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.
Installation InstructionsUser 1
- MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
- K&N Million Mile Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2024 | Dodge | Durango | Citadel |
| 2017-2026 | Dodge | Durango | GT |
| 2020-2026 | Dodge | Durango | GT Plus |
| 2023-2024 | Dodge | Durango | GT Premium |
| 2016 | Dodge | Durango | Limited |
| 2019-2026 | Dodge | Durango | Pursuit |
| 2016-2020 | Dodge | Durango | Special Service |
| 2016-2024 | Dodge | Durango | SXT |
| 2018-2021,2023-2024 | Dodge | Durango | SXT Plus |
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2021 | Jeep | Grand Cherokee | 80th Anniversary |
| 2018-2020 | Jeep | Grand Cherokee | Altitude |
| 2018-2021 | Jeep | Grand Cherokee | High Altitude |
| 2016-2020 | Jeep | Grand Cherokee | Laredo |
| 2021 | Jeep | Grand Cherokee | Laredo E |
| 2021 | Jeep | Grand Cherokee | Laredo X |
| 2016-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2016-2021 | Jeep | Grand Cherokee | Overland |
| 2016-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
| 2019-2020 | Jeep | Grand Cherokee | Upland |
| 2022 | Jeep | Grand Cherokee WK | Laredo E |
| 2022 | Jeep | Grand Cherokee WK | Laredo X |
| 2022 | Jeep | Grand Cherokee WK | Limited |
$369.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Cherokee | 75th Anniversary |
| 2014-2018 | Jeep | Cherokee | Latitude |
| 2018 | Jeep | Cherokee | Latitude Plus |
| 2014-2018 | Jeep | Cherokee | Limited |
| 2016-2018 | Jeep | Cherokee | Overland |
| 2014-2017 | Jeep | Cherokee | Sport |
| 2014-2018 | Jeep | Cherokee | Trailhawk |
$390.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2018 | Ram | 2500 | Big Horn |
| 2014-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2014-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2014-2015 | Ram | 2500 | Lone Star |
| 2014-2016 | Ram | 2500 | Outdoorsman |
| 2014-2018 | Ram | 2500 | Power Wagon |
| 2014-2018 | Ram | 2500 | SLT |
| 2014-2018 | Ram | 2500 | Tradesman |
| 2014-2018 | Ram | 3500 | Big Horn |
| 2014-2018 | Ram | 3500 | Laramie |
| 2014-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2014-2015,2017 | Ram | 3500 | Lone Star |
| 2014-2018 | Ram | 3500 | SLT |
| 2014-2018 | Ram | 3500 | Tradesman |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Dodge | Durango | SRT |
| 2022-2023 | Dodge | Durango | SRT 392 |
| 2023 | Dodge | Durango | SRT 392 Plus |
| 2023 | Dodge | Durango | SRT 392 Premium |
| 2014-2021 | Jeep | Grand Cherokee | SRT |
| 2012-2013 | Jeep | Grand Cherokee | SRT8 |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Rubicon |
| 2012-2017 | Jeep | Wrangler | Sahara |
| 2012-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2012-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2012-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$369.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Compass | 80th Anniversary |
| 2019-2022 | Jeep | Compass | Altitude |
| 2019-2020,2022 | Jeep | Compass | High Altitude |
| 2017-2022 | Jeep | Compass | Latitude |
| 2022 | Jeep | Compass | Latitude Lux |
| 2017-2022 | Jeep | Compass | Limited |
| 2022 | Jeep | Compass | Red |
| 2017-2022 | Jeep | Compass | Sport |
| 2017-2022 | Jeep | Compass | Trailhawk |
| 2019 | Jeep | Compass | Upland |
| 2016 | Jeep | Renegade | 75th Anniversary |
| 2021 | Jeep | Renegade | 80th Anniversary |
| 2018-2020 | Jeep | Renegade | Altitude |
| 2016 | Jeep | Renegade | Dawn Of Justice |
| 2021 | Jeep | Renegade | Islander |
| 2021 | Jeep | Renegade | Jeepster |
| 2015-2021 | Jeep | Renegade | Latitude |
| 2015-2018 | Jeep | Renegade | Limited |
| 2015-2021 | Jeep | Renegade | Sport |
| 2015-2018 | Jeep | Renegade | Trailhawk |
| 2019-2021 | Jeep | Renegade | Upland |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2024 | Dodge | Durango | Citadel |
| 2011-2013 | Dodge | Durango | Crew |
| 2018 | Dodge | Durango | GT |
| 2014-2016 | Dodge | Durango | Limited |
| 2018-2026 | Dodge | Durango | Pursuit |
| 2011-2026 | Dodge | Durango | R/T |
| 2022-2023 | Dodge | Durango | R/T Hemi Orange |
| 2022-2026 | Dodge | Durango | R/T Plus |
| 2023-2026 | Dodge | Durango | R/T Premium |
| 2012-2026 | Dodge | Durango | Special Service |
| 2018 | Dodge | Durango | SXT |
| 2018-2020 | Jeep | Grand Cherokee | High Altitude |
| 2011-2013 | Jeep | Grand Cherokee | Laredo |
| 2011-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2011-2021 | Jeep | Grand Cherokee | Overland |
| 2012 | Jeep | Grand Cherokee | Overland Summit |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2012-2017 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2012-2017 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2012-2013 | Ram | 2500 | Power Wagon |
| 2012-2018 | Ram | 2500 | SLT |
| 2012-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2012-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2012-2018 | Ram | 3500 | SLT |
| 2012-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$422.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2015 | Dodge | Durango | Citadel |
| 2011-2013 | Dodge | Durango | Crew |
| 2011 | Dodge | Durango | Express |
| 2011 | Dodge | Durango | Heat |
| 2014-2015 | Dodge | Durango | Limited |
| 2014-2015 | Dodge | Durango | Rallye |
| 2012-2015 | Dodge | Durango | Special Service |
| 2012-2015 | Dodge | Durango | SXT |
| 2011-2015 | Jeep | Grand Cherokee | Laredo |
| 2011-2015 | Jeep | Grand Cherokee | Limited |
| 2011-2015 | Jeep | Grand Cherokee | Overland |
| 2012 | Jeep | Grand Cherokee | Overland Summit |
| 2014-2015 | Jeep | Grand Cherokee | Summit |
$369.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
Installation Instructions
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2007-2011 | Jeep | Wrangler | Rubicon |
| 2007-2011 | Jeep | Wrangler | Sahara |
| 2010-2011 | Jeep | Wrangler | Sport |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2007-2011 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2011 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2011 | Jeep | Wrangler | Unlimited Sport |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
$369.99
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2008 | Dodge | Ram 1500 | Laramie |
| 2003-2008 | Dodge | Ram 1500 | SLT |
| 2006-2007 | Dodge | Ram 1500 | Sport |
| 2003-2008 | Dodge | Ram 1500 | ST |
| 2008 | Dodge | Ram 1500 | SXT |
| 2006-2007 | Dodge | Ram 1500 | TRX4 |
| 2003,2005-2008 | Dodge | Ram 2500 | Laramie |
| 2006-2008 | Dodge | Ram 2500 | Power Wagon |
| 2003-2008 | Dodge | Ram 2500 | SLT |
| 2006-2007 | Dodge | Ram 2500 | Sport |
| 2003-2008 | Dodge | Ram 2500 | ST |
| 2008 | Dodge | Ram 2500 | SXT |
| 2006-2007 | Dodge | Ram 2500 | TRX4 |
| 2003-2008 | Dodge | Ram 3500 | Laramie |
| 2003-2008 | Dodge | Ram 3500 | SLT |
| 2006-2007 | Dodge | Ram 3500 | Sport |
| 2003-2008 | Dodge | Ram 3500 | ST |
| 2008 | Dodge | Ram 3500 | SXT |
$369.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Chevrolet | Colorado | LT |
| 2023-2026 | Chevrolet | Colorado | Trail Boss |
| 2023-2026 | Chevrolet | Colorado | WT |
| 2023-2026 | Chevrolet | Colorado | Z71 |
| 2023-2026 | Chevrolet | Colorado | ZR2 |
| 2023-2026 | GMC | Canyon | AT4 |
| 2023-2024,2026 | GMC | Canyon | AT4X |
| 2023-2026 | GMC | Canyon | Denali |
| 2023-2026 | GMC | Canyon | Elevation |
$474.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
$212.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2024 | Toyota | GR Corolla | Circuit Edition |
| 2023-2025 | Toyota | GR Corolla | Core |
| 2023 | Toyota | GR Corolla | Morizo Edition |
| 2024-2025 | Toyota | GR Corolla | Premium |
| 2025 | Toyota | GR Corolla | Premium Plus |
$629.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | Sequoia | 1794 Edition |
| 2023-2026 | Toyota | Sequoia | Capstone |
| 2023-2026 | Toyota | Sequoia | Limited |
| 2023-2026 | Toyota | Sequoia | Platinum |
| 2023-2026 | Toyota | Sequoia | SR5 |
| 2023-2026 | Toyota | Sequoia | TRD Pro |
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2024-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2025 | Ford | Ranger | Lariat |
| 2025 | Ford | Ranger | XLT |
$474.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2024 | Ford | Ranger | Lariat |
| 2024 | Ford | Ranger | XL |
| 2024 | Ford | Ranger | XLT |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-250 Super Duty | King Ranch |
| 2017-2025 | Ford | F-250 Super Duty | Lariat |
| 2018-2024 | Ford | F-250 Super Duty | Limited |
| 2017-2025 | Ford | F-250 Super Duty | Platinum |
| 2017-2025 | Ford | F-250 Super Duty | XL |
| 2017-2025 | Ford | F-250 Super Duty | XLT |
| 2017-2025 | Ford | F-350 Super Duty | King Ranch |
| 2017-2025 | Ford | F-350 Super Duty | Lariat |
| 2018-2024 | Ford | F-350 Super Duty | Limited |
| 2017-2025 | Ford | F-350 Super Duty | Platinum |
| 2017-2025 | Ford | F-350 Super Duty | XL |
| 2017-2025 | Ford | F-350 Super Duty | XLT |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Expedition | Active |
| 2020-2026 | Ford | Expedition | King Ranch |
| 2018-2024 | Ford | Expedition | Limited |
| 2025-2026 | Ford | Expedition | Max Active |
| 2020-2026 | Ford | Expedition | Max King Ranch |
| 2018-2024 | Ford | Expedition | Max Limited |
| 2018-2026 | Ford | Expedition | Max Platinum |
| 2018-2026 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2024 | Ford | Expedition | Max XLT |
| 2018-2026 | Ford | Expedition | Platinum |
| 2018-2026 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2025-2026 | Ford | Expedition | Tremor |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2018-2024 | Ford | Expedition | XLT |
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
$842.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.
Installation InstructionsUser 1
- No-Hassle Lifetime Limited Warranty™
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | Sequoia | 1794 Edition |
| 2023-2026 | Toyota | Sequoia | Capstone |
| 2023-2026 | Toyota | Sequoia | Limited |
| 2023-2026 | Toyota | Sequoia | Platinum |
| 2023-2026 | Toyota | Sequoia | SR5 |
| 2023-2026 | Toyota | Sequoia | TRD Pro |
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$474.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- No-Hassle Lifetime Limited Warranty™
- Million Mile Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
$369.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- No-Hassle Lifetime Limited Warranty™
- Million Mile Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2015 | Chevrolet | Camaro | SS |
| 2012-2015 | Chevrolet | Camaro | ZL1 |
$422.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- No-Hassle Lifetime Limited Warranty™
- Million Mile Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2023 | Ford | Mustang | GT |
| 2018-2023 | Ford | Mustang | GT Premium |
$369.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Installation InstructionsUser 1
- No-Hassle Lifetime Limited Warranty™
- Million Mile Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2017 | Ford | Mustang | GT Premium |
Showing 570/1552
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.