Fits 2016-2024 Chevrolet Camaro LS, LT, LT1, SS, and ZL1 models without electronic dampers.

The KW V3 Coilover suspension kit is engineered for performance-oriented drivers who demand precise control over their vehicle's handling dynamics. Built with KW's proprietary Inox-Line stainless steel technology, these coilovers provide permanent corrosion resistance and an unlimited lifespan, ensuring the spring perches remain adjustable even after years of use. Unlike standard suspension kits, the V3 features separate, independent adjustment for both compression and rebound damping, allowing for a customized setup that matches specific tire characteristics, vehicle weight, and driving style.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for comfort during slow damper speeds, while the main rebound valve opens at high speeds for maximum fluid displacement and stability.
• TVC-A (Twin Valve Compression - Adjustable): This patented valve allows for fine-tuning low-speed compression to control body roll and squat, with a high-speed blow-off feature to absorb sudden impacts.
• Inox-Line Stainless Steel: Strut housings are constructed from high-quality stainless steel to prevent oxidation and ensure durability.
• Composite Spring Perch: Manufactured from wear-resistant, friction-optimized polyamide composite with a stainless steel insert for maximum load-bearing strength.
• Hand-Built Quality: Each kit is hand-assembled in Fichtenberg, Germany, and every individual damper is dyno-tested to ensure accuracy to the factory preset settings.

By independently adjusting the compression and rebound, you can improve cornering behavior, increase tire grip, and reduce pitch and roll during aggressive maneuvers without compromising the ride quality matched to your spring rate. Part Number: 35261027.

Fits 1993-1998 Toyota Supra Base and Twin Turbo models.

The KW Variant 3 (V3) coilover kit brings motorsports-derived suspension technology to the JZA80 chassis. Engineered for performance-oriented drivers, the V3 system provides independent adjustment of rebound and compression damping, allowing you to fine-tune the handling characteristics of your Supra for different tire setups, vehicle weights, or chassis rigidity requirements.

Built with KW's proprietary Inox-line stainless steel technology, these coilovers are designed for permanent corrosion resistance and long-term durability. Each kit features patented twin-valve technology (TVR-A and TVC-A) to manage oil flow during low and high piston speeds, ensuring consistent damping through corners, heavy braking, and rapid weight transfers.

• TVR-A (Twin Valve Rebound - Adjustable): Features 16 clicks of adjustment to control low-speed rebound through a conical bypass, improving ride comfort and body control.
• TVC-A (Twin Valve Compression - Adjustable): Provides 12 clicks of low-speed compression adjustment to optimize tire grip and steering behavior without affecting the rebound stage.
• Inox-Line Stainless Steel: Corrosion-resistant strut bodies ensure the height-adjustable trapezoidal threads remain functional for the life of the vehicle.
• Composite Spring Perch: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and seizing.
• Manufacturing: Hand-built in Fichtenberg, Germany, and dyno-tested to ensure each damper meets strict performance tolerances.
• MPN: 35256010

The KW V3 Coilover kit provides a significant upgrade in handling dynamics and vehicle control for the 2017-2025 Honda Civic Type R and 2024-2025 Acura Integra Type S. Engineered with motorsport-derived damping technology, this kit allows for independent adjustment of both compression and rebound stages, enabling drivers to fine-tune their suspension for specific tire characteristics, vehicle weight, or road conditions. This specific kit includes electronic damper cancellation (EDC) delete modules to ensure a seamless installation without dashboard error codes on vehicles equipped with factory adaptive suspension.

• TVR-A (Twin Valve Rebound - Adjustable) technology: 16 clicks of rebound adjustment to control pitch and roll
• TVC-A (Twin Valve Compression - Adjustable) technology: 12 clicks of low-speed compression adjustment for steering precision and grip
• Inox-Line stainless steel strut bodies for permanent corrosion resistance and long-term height adjustability
• Friction-optimized polyamide composite spring perches with stainless steel inserts for maximum durability
• Includes application-specific electronic damper delete modules
• Each unit is hand-built in Germany and individual dyno-tested for accuracy
• Manufacturer Part Number: 35250036

Fits 1991-2005 Acura NSX Base, T, and Alex Zanardi Edition (NA1) models.

The KW Variant 3 (V3) coilover kit brings track-tested motorsports technology to the street, offering a significant upgrade in handling precision and safety reserves for the Acura NSX. Utilizing a patented dual-valve damping system, this kit allows for independent adjustment of both compression and rebound stages, enabling enthusiasts to fine-tune the suspension for specific tire characteristics, vehicle weight changes, or personal driving preferences without compromising ride quality.

Constructed with KW’s proprietary Inox-line stainless steel technology, these struts provide permanent corrosion resistance and an unlimited lifespan, even under harsh conditions. The assembly includes friction-optimized polyamide composite spring perches with stainless steel inserts for maximum durability. Each kit is hand-built and dyno-tested in Fichtenberg, Germany, ensuring that every damper meets strict performance tolerances before installation.

• TVR-A (Twin Valve Rebound - Adjustable) technology for 16 clicks of low-speed rebound damping control.
• TVC-A (Twin Valve Compression - Adjustable) technology for 12 clicks of low-speed compression adjustment.
• Inox-line stainless steel strut bodies for 100% corrosion resistance.
• Elastomer bump stops with integrated dust protection for long-term seal integrity.
• High-resilience springs and elastomer elements designed to reduce pitch and roll.
• Individually serial-numbered and dyno-tested for accuracy.
• Manufacturer Part Number: 35250022

Fits 2015-2021 Subaru WRX and WRX STI (including Base, Limited, Premium, Launch Edition, S209, Series.HyperBlue, and Type RA).

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who require precise control over their suspension dynamics. Featuring patented TVR-A and TVC-A technology, this system allows for independent adjustment of both rebound and compression damping. This dual-valve technology enables you to fine-tune steering behavior, directional stability, and grip levels without compromising the primary damping characteristics matched to the spring rate.

Built for longevity in harsh environments, the dampers feature Inox-Line stainless steel bodies that provide permanent corrosion resistance. The kit includes friction-optimized composite spring perches with stainless steel inserts and elastomer bump stops with integrated dust protection to shield the piston rods and seals from road debris.

• MPN: 35245018
• Technology: TVR-A (Twin Valve Rebound) and TVC-A (Twin Valve Compression) adjustable
• Material: Inox-Line stainless steel strut housings
• Adjustment: Independent 16-click rebound and 12-click compression damping
• Components: Polyamide composite spring perches, elastomer bump stops, and integrated dust boots
• Manufacturing: Hand-built and dyno-tested in Fichtenberg, Germany

Fits 2019-2026 BMW Z4 and 2020-2026 Toyota GR Supra (2WD).

The KW V3 Clubsport coilover kit is engineered specifically for track-oriented performance and double-duty street vehicles utilizing ultra-high-performance or DOT-R tire setups. Developed on the Nürburgring Nordschleife, this kit provides an unmatched level of adjustment to maximize steering behavior, grip, and handling dynamics for high-performance driver's education (HPDE), time attack, and club-level racing.

This kit features KW's patented TVR-A and TVC-A valve technology, offering independent 2-way damping. The stainless-steel Inox-Line construction ensures permanent corrosion resistance, while the linear race springs and solid aluminum unibal top mounts deliver precise steering feedback by eliminating rubber deflection. Each kit is hand-built and dyno-tested to ensure accuracy and repeatability at the limit.

• Part Number: 352208CG
• TVR-A (Twin Valve Rebound) technology for adjustable low-speed bypass
• TVC-A (Twin Valve Compression) technology for low-speed fine-tuning and high-speed blow-off
• Inox-Line stainless steel strut bodies for unlimited lifespan
• Solid aluminum unibal top mounts for increased camber adjustment and feedback
• Composite spring perches with stainless steel inserts for strength and oxidation resistance
• Individually adjustable ride height for precise corner weighting
• Includes application-specific linear race springs

Fits 2022-2026 BMW M3 and M4 (G80/G82) Competition xDrive and CS models equipped with electronic dampers.

The KW V3 Coilover kit (MPN 352200EQ) utilizes race-derived technology to transform the handling dynamics of the G8x chassis. Engineered for performance-oriented drivers, this kit offers independent adjustment of compression and rebound damping, allowing for precise chassis tuning to match tire characteristics, vehicle weight, and driving environment. By reducing pitching and rolling during aggressive cornering and braking, the V3 system improves mechanical grip and provides more predictable feedback at the limit.

• TVR-A (Twin Valve Rebound - Adjustable): Allows for fine-tuning of low-speed rebound through a conical bypass, while the main valve handles high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve allows for low-speed adjustment with a high-speed blow-off feature to maintain stability over sudden impacts.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance and ensures the threaded struts remain adjustable throughout the lifespan of the vehicle.
• Composite Spring Perch: Constructed from friction-optimized polyamide with a stainless steel insert for maximum strength without oxidation.
• Quality Assured: Each kit is hand-built in Fichtenberg, Germany, and every individual damper is dyno-tested to ensure performance and accuracy before shipping.

Fitment Applications:
2022-2025 BMW M3 Competition xDrive
2024 BMW M3 CS
2022 BMW M4 Competition
2022-2026 BMW M4 Competition xDrive

The KW Suspension Variant 3 (V3) Coilover Kit fits select 2021-2026 BMW M2 (G87), M3 (G80), and M4 (G82) models, providing significant improvements in handling, body control, and high-speed stability.

Engineered for performance-oriented drivers, the V3 system utilizes patented TVR-A (Twin Valve Rebound - Adjustable) and TVC-A (Twin Valve Compression - Adjustable) technology. This allows for independent adjustment of both rebound and compression damping, enabling you to fine-tune the suspension for specific tire characteristics, vehicle weight changes, or personal driving preferences without compromising the baseline damping profile. The result is a significant reduction in pitch and roll during aggressive cornering, acceleration, and braking.

Built to withstand harsh environments, the dampers feature KW's Inox-Line stainless steel bodies for permanent corrosion resistance, paired with friction-optimized polyamide composite spring perches. Each kit is hand-assembled in Fichtenberg, Germany, and dyno-tested to ensure precise damping force across all four corners.

• Fits 2023-2025 BMW M2 (Base) and 2021-2025 BMW M3 (Base/Competition) and 2021-2026 BMW M4 (Base/Competition).
• Independently adjustable rebound (TVR-A) and compression (TVC-A) damping.
• Inox-Line stainless steel strut housings for 100% corrosion resistance.
• Composite spring perches with stainless steel inserts for durability and easy adjustment.
• Elastomer bump stops with integrated dust protection for increased seal longevity.
• Individually serialized and dyno-tested for quality assurance.
• Manufacturer Part Number: 352200EB

Fits 2019-2026 BMW Z4 (sDrive30i, M40i) and Toyota GR Supra models equipped with electronic dampers.

The KW V3 (Variant 3) Coilover Kit is engineered for performance-oriented drivers who demand precise control over their vehicle's handling dynamics. By utilizing patented TVR-A (Twin Valve Rebound - Adjustable) and TVC-A (Twin Valve Compression - Adjustable) technology, this system allows for independent adjustment of both rebound and compression damping. This dual-valve design enables you to fine-tune steering behavior, directional stability, and tire grip for repeatable results at the limit, without the compromises found in single-adjustable dampers.

Each kit features KW’s Inox-Line stainless steel strut housings, ensuring permanent corrosion resistance even under heavy use or harsh conditions. The composite spring perches are reinforced with stainless steel inserts to prevent oxidation and ensure ease of height adjustment over the life of the vehicle. Every damper unit is dyno-tested and preset to KW's recommended base settings before leaving the factory in Fichtenberg, Germany.

• Manufacturer Part Number: 352200CH
• TVR-A Technology: Adjustable low-speed rebound bypass for tailored comfort and handling
• TVC-A Technology: Patented compression valve for independent low-speed tuning
• Inox-Line: 100% corrosion-resistant stainless steel construction
• Adjustment: Independent 16-click rebound and 12-click compression damping
• Includes: Four coilovers, elastomer bump stops with integrated dust protection, and adjustment tools

Fits 2016-2021 BMW M2 models, including Base, Competition, and CS. The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who require independent control over suspension dynamics. Utilizing patented motorsports technology, this kit allows for separate adjustment of rebound and compression damping, enabling you to fine-tune the handling characteristics of your M2 for specific tire setups, vehicle weight changes, or personal driving preferences.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for slow damper speeds and a main rebound valve that opens at higher speeds to manage fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Allows for precise low-speed compression tuning with a blow-off feature for high-piston speeds to maximize flow and maintain stability.
• Inox-Line Stainless Steel: Provides 100% corrosion resistance with a finish that will not wear off during height adjustments, ensuring an unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite encompassing a stainless steel insert for maximum strength without oxidation.
• Precision Engineering: Each damper is hand-built in Germany, dyno-tested for accuracy, and features an individual serial number.
• Part Number: 352200BH

Fits 2015-2020 BMW M3 and M4 models (F80/F82), including Base, CS, and GTS trims. This kit includes the electronic cancellation modules required for vehicles equipped with factory electronic damping control (EDC).

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who demand precise control over their suspension dynamics. Utilizing patented motorsports technology, the V3 system allows for independent adjustment of both compression and rebound damping, enabling you to fine-tune the chassis for specific tire characteristics, vehicle weight changes, or personal handling preferences. The dampers feature KW's Inox-Line stainless steel construction, ensuring the threaded struts remain 100% corrosion-resistant and adjustable throughout the life of the vehicle.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of rebound adjustment to control pitch and roll while optimizing ride comfort.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of low-speed compression adjustment to manage weight transfer and improve turn-in grip without affecting the high-speed blow-off.
• Inox-Line Stainless Steel: Highly durable finish that prevents oxidation and ensures the composite spring perches never seize.
• Complete Solution: Includes electronic cancellation modules to prevent dashboard error codes when replacing the factory electronic suspension.
• Manufacturer Part Number: 352200AP
• Origin: Hand-built and dyno-tested in Fichtenberg, Germany.

Fits 2015-2020 BMW M3 and M4 (F80/F82) including Base, CS, and GTS trims.

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who require precise control over their chassis dynamics. Featuring patented TVR-A and TVC-A technology, this system allows for independent adjustment of both rebound and compression damping. This dual-level tuning enables you to sharpen steering response and directional stability through 16 clicks of rebound, while managing body roll and tire grip through 12 clicks of compression damping.

Built for longevity in harsh environments, the KW V3 utilizes Inox-Line stainless steel strut housings for permanent corrosion resistance. The friction-optimized polyamide composite spring perches prevent oxidation between the perch and the strut body, ensuring the height remains adjustable even after years of use.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of adjustment to fine-tune handling and ride comfort.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of low-speed compression adjustment to control pitch and roll without affecting the rebound curve.
• Inox-Line Stainless Steel: High-quality construction that will not rust or seize, ensuring an unlimited lifespan.
• Composite Spring Perch: Wear-resistant polyamide composite with a stainless steel insert for maximum strength and corrosion-free height adjustment.
• Complete Protection: Elastomer bump stops with integrated dust covers protect the piston rods and seals from road debris.
• Dyno Tested: Every damper is dyno-tested and preset to KW’s recommended baseline settings before delivery.
• Manufacturer Part Number: 352200AN

Fits 2014-2019 BMW X5 and X6 models equipped with factory rear air suspension and Electronic Damper Control (EDC).

The KW V3 (Variant 3) Coilover Kit brings adjustable motorsport technology to the street, allowing for precise control over your vehicle's driving dynamics. Engineered for the BMW X5 (F15) and X6 (F86) platforms, this kit includes the necessary components to integrate with factory rear air suspension and bypass the Electronic Damper Control (EDC) system without triggering error codes. The V3 system significantly reduces body roll, pitching, and squat during weight transfer, providing improved steering feedback and shorter braking distances.

• TVR-A (Twin Valve Rebound): 16 clicks of adjustable rebound damping allow you to fine-tune handling and comfort by controlling how the damper extends.
• TVC-A (Twin Valve Compression): 12 clicks of adjustable low-speed compression damping to influence steering behavior, grip levels, and handling without affecting the rebound settings.
• Inox-Line Stainless Steel: Corrosion-resistant strut bodies and friction-optimized polyamide composite perches ensure the suspension remains adjustable even after years of exposure to the elements.
• Safety and Quality: Every kit is hand-assembled and dyno-tested in Fichtenberg, Germany, featuring application-specific spring rates and elastomer bump stops with integrated dust protection.
• Manufacturer Part Number: 352200AM

Vehicle Fitment

• 2015-2018 BMW X5 M
• 2014-2018 BMW X5 sDrive35i
• 2014-2018 BMW X5 xDrive35d
• 2014-2018 BMW X5 xDrive35i
• 2016-2018 BMW X5 xDrive40e
• 2014-2018 BMW X5 xDrive50i
• 2015-2019 BMW X6 M

Fits 2001-2006 BMW M3 Base.

The KW V3 Coilover suspension kit is engineered for performance-oriented drivers seeking precise control over vehicle handling dynamics. Built with patented "inox-line" stainless steel technology, these coilovers provide permanent corrosion resistance and an unlimited lifespan. The V3 system features independent adjustment for both rebound and compression damping, allowing you to fine-tune the E46 M3 chassis to match specific tire characteristics, vehicle weight, and driving preferences without compromising ride quality.

• TVR-A (Twin Valve Rebound - Adjustable): Allows oil to flow through an adjustable conical low-speed bypass during slow damper speeds, while the main rebound valve opens for high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve enables fine-tuning of low-speed damping with a blow-off feature to maximize flow during sudden high piston speeds.
• Inox-Line Stainless Steel: Truly permanent corrosion resistance ensures the strut housings and adjustment threads remain functional for the life of the vehicle.
• Composite Spring Perches: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and maximizes strength.
• Individually Dyno Tested: Each damper is hand-built in Germany and dyno-tested to ensure accuracy before being preset to KW's recommended shock settings.

Manufacturer Part Number: 35220023

Fits 2000-2003 BMW M5 Base (E39) Sedan.

The KW Variant 3 (V3) Coilover suspension kit is engineered for performance-oriented drivers who demand independent control over damping characteristics. Utilizing patented motorsports technology, the V3 system allows for separate adjustment of rebound and compression stages to fine-tune steering behavior, directional stability, and grip for any driving environment.

Constructed with KW Inox-Line stainless steel strut housings, these coilovers provide permanent corrosion resistance and durability. The kit features friction-optimized polyamide composite spring perches with stainless steel inserts, ensuring easy height adjustment for the life of the vehicle without oxidation or seizing. Each unit is hand-built and dyno-tested to ensure accuracy and performance before leaving the factory.

• TVR-A (Twin Valve Rebound - Adjustable) technology for precise low-speed bypass control
• TVC-A (Twin Valve Compression - Adjustable) technology for high-speed blow-off and low-speed tuning
• Inox-Line stainless steel bodies for maximum corrosion resistance
• Dirt-resistant trapezoidal threads and composite spring perches
• Individually height-adjustable on both front and rear axles
• High-resilient elastomer bump stops with integrated dust protection
• Manufacturer Part Number: 35220018

Fits 2017-2020 Audi RS3 Base models equipped with Electronic Damper Control (EDC).

The KW V3 (Variant 3) Coilover Kit provides the ultimate in street performance and customizability for the Audi RS3 (8V) platform. Engineered in Germany, this kit utilizes motorsports-derived technology to significantly reduce body roll, pitch, and squat during aggressive driving maneuvers. The V3 system features independent damping adjustment, allowing you to fine-tune the suspension to your specific tires, vehicle weight, and road conditions without compromising the balance between rebound and compression.

Constructed with KW’s signature "inox-line" stainless steel technology, these coilovers offer permanent corrosion resistance, ensuring the height-adjustment threads remain functional for the life of the vehicle. Each kit features TVR-A and TVC-A valving for precise low-speed damping control while maintaining high-speed blow-off for road comfort.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of rebound adjustment to influence handling and comfort.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of compression damping to control body roll and tire grip.
• Inox-Line Stainless Steel: 100% corrosion-resistant strut housings for unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite with stainless steel inserts prevents oxidation and seizing.
• Safety & Quality: Hand-built in Fichtenberg, Germany; each damper is dyno-tested and serialized.
• MPN: 352100AL

Fits select 2008-2017 Audi A4, A5, RS5, S4, and S5 models without electronic damping control (Non-EDC).

The KW Variant 3 (V3) Coilover Kit is the benchmark for performance street suspension, offering race-derived technology for daily use. Unlike standard coilovers, the V3 features independent adjustment for both compression and rebound damping. This allows for precise tuning of the vehicle's pitch and roll behavior, improving tire grip and handling without sacrificing ride quality. Developed and manufactured in Germany, each kit is designed to reduce braking distances and improve steering feedback through advanced damping technology.

• TVR-A (Twin Valve Rebound - Adjustable): Conical low-speed bypass allows for comfort-oriented tuning, while the main rebound valve handles high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented valve allows for fine-tuning of low-speed compression with a blow-off feature to maximize flow during sudden high piston speeds.
• Inox-Line Stainless Steel: Permanent corrosion resistance ensures that the adjustment threads will not seize or wear over the life of the vehicle.
• Composite Spring Perch: Made from wear-resistant, friction-optimized polyamide with a stainless steel insert for maximum strength and ease of adjustment.
• Hand-Built Quality: Each kit is dyno-tested and given a unique serial number at KW headquarters in Fichtenberg, Germany.

Manufacturer Part Number: 35210075

Fits 2007-2008 Audi RS4 Base models (QB6 Sedan Quattro).

The KW V3 Coilover kit (Variant 3) is a benchmark for performance-oriented street driving, utilizing motorsports-derived technology to deliver significant improvements in handling, stability, and safety. By replacing the factory suspension with KW’s high-quality dampers and springs, you significantly reduce pitching and rolling during aggressive cornering, acceleration, and braking. This kit is specifically designed for the Audi RS4 platform, providing the feedback and support necessary for confident driving at the limit.

The V3 stands out with its ability to adjust compression and rebound damping independently. Using patented TVR-A and TVC-A valve technology, you can fine-tune the low-speed damping to influence steering behavior and grip without affecting the ride quality provided by the high-speed blow-off valves. This ensures a custom-tailored setup that matches your specific tire characteristics and vehicle weight.

• Manufacturer Part Number: 35210051
• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of adjustment to bypass the low-speed conical valve for precise rebound control.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of adjustment to tune low-speed compression while high-speed valves handle sudden impacts.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance and an unlimited lifespan, ensuring height adjustments remain easy for years.
• Composite Spring Perches: Friction-optimized polyamide perches with stainless steel inserts prevent oxidation and maintain structural strength.
• Dyno-Tested Quality: Each damper is hand-built in Germany and dyno-tested to ensure performance matches factory-recommended settings.
• Note: This kit requires the 68510141 cancellation kit for installation on vehicles equipped with electronic damping systems.

Fits 2009-2024 Nissan GT-R (R35) models including Premium, Black Edition, Track Edition, and T-spec.

The KW H.A.S. (Height Adjustable Spring) kit offers a versatile alternative to conventional fixed lowering springs. Designed specifically for the R35 chassis, this system allows you to fine-tune your vehicle's ride height using the KW threaded adjusters even after the kit is installed. This flexibility ensures you can achieve the perfect stance without being locked into a single height setting.

Engineered for performance-oriented driving, these kits maintain the full functionality of the Nissan GT-R's factory adaptive or electronic suspension systems. KW uses high-strength chrome-silicon steel for the springs, with rates specifically calibrated to the OE dampers and vehicle wheel loads. This results in more agile steering response and improved handling dynamics while preserving factory comfort modes.

• Precision Adjustment: Continuous ride height adjustment within a technically tested range, unlike traditional static lowering springs.
• OEM Integration: Retains full functionality of factory electronic and adaptive damper systems.
• Premium Materials: High-tensile, multi-coated chrome-silicon steel springs for maximum longevity.
• Complete Hardware: Includes vehicle-specific elastomer bump stops and dust protection systems to prevent wear on factory dampers.
• Proven Engineering: Developed and tested at the Nurburgring Nordschleife and the KW 7-post Driving Dynamic Test Center.
• MPN: 25385006
• Warranty: Limited Lifetime Warranty with unlimited mileage.

Fits 2020-2025 Porsche 911 (Type 992) Carrera and Targa models, including S, 4S, GTS, T, and Sport Classic editions.

The KW H.A.S. (Height Adjustable Spring) kit provides a significant upgrade over conventional fixed lowering springs by allowing you to fine-tune your Porsche 911's ride height even after installation. Engineered specifically for the 992 chassis, this system utilizes threaded height adjusters that sit on the factory dampers, providing the height flexibility of a coilover while maintaining the full functionality of Porsche Active Suspension Management (PASM) and other electronic damping systems.

Every spring is manufactured from high-tensile chrome-silicon steel and features rates optimized for the 992's specific wheel loads and OE damper curves. This ensures that steering response and handling agility are improved without compromising the ride quality or the sophisticated driving dynamics Porsche is known for. The kit includes vehicle-specific elastomer bump stops and integrated dust protection to prevent premature wear on your factory suspension components.

• Continuous ride height adjustment with millimeter precision
• Retains factory electronic or adaptive suspension functionality
• High-strength multi-coated chrome-silicon steel springs
• Vehicle-specific bump stops and dust protection included
• Developed and tested on the Nurburgring Nordschleife
• Manufacturer Part Number: 25371084
• Limited Lifetime Warranty with unlimited mileage

Fits 2017-2019 Porsche 911 Turbo, Turbo S, and Turbo S Exclusive Series (Type 991.2) models equipped with the OE Lift System, including Convertibles.

The KW H.A.S. (Height Adjustable Spring) kit provides a customizable alternative to conventional lowering springs. Unlike fixed-rate springs that offer a single drop height, this system allows you to fine-tune your Porsche's ride height using the KW threaded height adjuster even after the kit is installed. This flexibility ensures you achieve the perfect stance while improving steering response and agility without sacrificing the functionality of your factory adaptive or electronic suspension systems.

Engineered specifically for the 991.2 Turbo chassis and its respective wheel loads, these springs are manufactured from high-strength, multi-coated chrome-silicon steel. Each kit includes vehicle-specific elastomer bump stops and a dust protection system to shield your factory dampers from road grime and wear. Developed through rigorous testing on the Nurburgring Nordschleife and the KW 7-post dynamic test rig, this kit ensures harmonized performance with your OE dampers and electronic driver assistance systems.

• Continuously adjustable ride height within a technically tested range
• Maintains full functionality of factory electronic/adaptive damping systems
• High-quality chrome-silicon steel construction for long-term durability
• Includes vehicle-specific bump stops and dust protection
• Designed for vehicles with or without electronic suspension
• Manufacturer Part Number: 25371075
• Limited Lifetime Warranty with Unlimited Mileage

Fits 2012-2021 Porsche 911 Carrera, Targa, and GTS models (Type 991).

The KW H.A.S. (Height Adjustable Spring) kit provides coilover-style height adjustment while retaining your Porsche's original dampers. Unlike conventional lowering springs that offer a fixed drop, this system allows you to fine-tune the ride height using the KW threaded height adjuster even after installation. This makes it an ideal solution for owners who want a lower center of gravity and a more aggressive stance without sacrificing the functionality of factory electronic suspension systems like PASM.

Every KW H.A.S. kit is engineered specifically for the vehicle’s wheel loads and damper characteristics. The high-strength springs are manufactured from multi-coated chrome-silicon steel to ensure long-term durability and consistent performance. To protect your factory suspension against road debris and bottoming out, the kit includes vehicle-specific elastomer bump stops and a dust protection system.

• Manufacturer Part Number: 25371043
• Adjustment: Continuous ride height adjustment within a tested range
• Suspension Compatibility: Retains full functionality of factory electronic or adaptive suspension
• Spring Material: High-tensile multi-coated chrome-silicon steel
• Hardware Included: Vehicle-specific bump stops and dust boots
• Testing: Developed on the Nürburgring Nordschleife and KW 7-post driving dynamic test center
• Warranty: Limited Lifetime Warranty / Unlimited Mileage

Fits 2018-2023 Aston Martin Vantage models, including Base, AMR, and F1 Edition (Type AM6) equipped with factory electronic dampers.

The KW H.A.S. (Height Adjustable Spring) kit provides a significant upgrade over conventional lowering springs by allowing you to fine-tune your vehicle's ride height even after installation. Unlike fixed-rate lowering springs, this system uses a threaded height adjuster that works with your factory dampers, ensuring you can achieve the perfect stance without sacrificing the functionality of your Aston Martin's electronic suspension system.

Each kit is engineered specifically for the Vantage’s wheel loads and damper characteristics. The springs are manufactured from high-tensile, multi-coated chrome-silicon steel for long-term durability and consistent performance. KW engineers utilize their 7-post Driving Dynamic Test Center and extensive Nurburgring testing to ensure the spring rates improve steering response and agility while maintaining OE comfort levels.

• Precision Adjustment: Continuous ride height adjustment within a tested range.
• Retains OE Features: Fully compatible with factory electronic damper control and driver assistance systems.
• Premium Construction: High-strength chrome-silicon steel springs with vehicle-specific elastomer bump stops.
• Protection: Includes a dust protection system to shield factory piston rods from road debris and grime.
• Manufacturer Part Number: 25333003
• Warranty: Limited Lifetime Warranty / Unlimited Mileage.

Fits select 2011-2023 Dodge Challenger and Charger models, including R/T, Scat Pack, SRT8, SRT 392, SXT, and GT trims.

The KW H.A.S. (Height Adjustable Spring) kit provides a significant upgrade over conventional lowering springs by allowing you to fine-tune your vehicle's ride height even after installation. Unlike fixed-rate springs that offer a single drop height, this system utilizes a threaded KW height adjuster, giving your Challenger or Charger a more aggressive stance while improving steering response and agility without the need to replace your factory dampers.

Engineered for compatibility with modern suspension technology, this kit ensures that all driver assistance systems and factory adaptive or electronic suspension features remain fully operational. Each kit is manufactured from high-strength chrome-silicon steel and features spring rates specifically tuned for the individual wheel loads and damper characteristics of the Dodge LX/LD platform.

• Continuous ride height adjustment with millimeter precision
• Retains factory electronic or adaptive damper functionality
• High-quality multi-coated chrome-silicon steel construction
• Includes vehicle-specific elastomer bump stops and dust protection systems
• Tested on the Nurburgring Nordschleife and KW 7-post driving dynamic rig
• Manufacturer Part Number: 25327018
• Limited Lifetime Warranty with unlimited mileage

Fits 2017-2021 Mercedes-Benz C63 AMG and C63 AMG S Base models.

The KW H.A.S. (Height Adjustable Spring) kit provides a dynamic alternative to traditional lowering springs, allowing you to fine-tune your vehicle's stance without being locked into a fixed ride height. Unlike standard spring sets, this system utilizes a threaded height adjuster that enables precise leveling even after the kit is installed on the vehicle. This allows for a customized look and improved center of gravity while retaining the full functionality of the factory Mercedes-Benz adaptive or electronic suspension systems.

Constructed from high-tensile chrome-silicon steel, these springs are engineered with rates specifically tuned to the W205-generation wheel loads and damper characteristics. Each kit includes vehicle-specific elastomer bump stops and integrated dust protection to prevent premature wear on factory shocks caused by road debris and grit. All H.A.S. systems undergo rigorous validation at the KW 7-post Driving Dynamic Test Center and the Nurburgring Nordschleife to ensure agile steering response and harmonious ride quality.

• Precision Adjustment: Millimeter-accurate ride height tuning similar to a coilover system.
• OEM Integration: Maintains 100% functionality of factory electronic and adaptive damping systems.
• Premium Construction: Multi-coated chrome-silicon steel springs for maximum durability and corrosion resistance.
• Optimized Protection: Includes application-specific bump stops and dust boots to protect OE dampers.
• Technical Specs: Manufacturer Part Number 25325089; tested for continuous height adjustment.
• Warranty: Limited Lifetime Warranty with unlimited mileage.

Fits select 2016-2021 Mercedes-Benz AMG GT, GT C, and GT S models.

The KW H.A.S. (Height Adjustable Spring) kit provides a dynamic lowering solution for vehicles equipped with factory adaptive or electronic suspension. Unlike traditional lowering springs that offer a fixed drop, this system utilizes a threaded height adjuster, allowing you to fine-tune your Mercedes-Benz AMG GT's ride height even after installation. This ensures a perfect stance while maintaining the full functionality of your OE damping controls.

Each kit is engineered with vehicle-specific spring rates using high-tensile chrome-silicon steel. The included elastomer bump stops and integrated dust protection systems are designed to protect factory dampers from premature wear caused by road debris. Tested on the Nürburgring Nordschleife, the KW H.A.S. kit improves steering response and agility without compromising the car's driving dynamics or electronic assistance systems.

• Individual height adjustment for each corner with millimeter precision
• Retains factory electronic/adaptive damper functionality
• High-strength multi-coated chrome-silicon steel construction
• Includes vehicle-specific bump stops and dust protection
• Tested range for continuous ride height adjustment
• Manufacturer Part Number: 25325080

Fits 2014-2018 Mercedes-Benz CLS63 AMG and E63 AMG 4Matic models.

The KW H.A.S. (Height Adjustable Spring) kit provides a versatile alternative to conventional fixed-height lowering springs. This system allows you to fine-tune your vehicle's stance using the KW height adjuster even after installation, providing a more aggressive look and more agile steering response. Unlike standard lowering springs, the H.A.S. kit is engineered to work harmoniously with your factory adaptive or electronic suspension, ensuring all driver assistance systems and comfort features remain fully operational.

• Dynamic Adjustability: Enables continuous ride height adjustment with millimeter precision, unlike fixed lowering springs.
• Premium Construction: High-strength springs manufactured from multi-coated chrome-silicon steel for maximum longevity and consistent performance.
• Vehicle-Specific Tuning: Spring rates are custom-matched to the factory dampers and wheel loads of the CLS63 and E63 AMG platforms.
• Integrated Protection: Includes application-specific elastomer bump stops and dust protection to prevent premature wear on factory suspension components.
• Track-Tested: Developed and refined through comprehensive testing on the Nurburgring Nordschleife and the KW 7-post Driving Dynamic Test Center.
• MPN: 25325071
• Warranty: Limited Lifetime Warranty / Unlimited Mileage.

Fits 2019-2024 Mercedes-Benz AMG GT 43 and AMG GT 53 Base models.

The KW H.A.S. (Height Adjustable Spring) kit offers a versatile alternative to conventional lowering springs, providing the ability to fine-tune your vehicle's ride height even after installation. This system (MPN: 2532500V) utilizes threaded height adjusters that allow for precise millimeter-level adjustments, ensuring you achieve the perfect stance without the fixed-drop limitations of standard springs.

Constructed from high-strength chrome-silicon steel, these springs are engineered with rates specifically matched to the factory dampers and wheel loads of the AMG GT 4-door coupe. This specialized tuning enhances steering agility and response while maintaining full compatibility with your Mercedes-Benz adaptive or electronic suspension systems. The kit includes vehicle-specific elastomer bump stops and a dust protection system to safeguard your factory dampers from road debris and premature wear.

• Adjustable Ride Height: Continuous adjustment range allows for a customized drop similar to a coilover system.
• Retains Factory Electronics: Fully compatible with OEM adaptive suspension and driver assistance systems.
• High-Strength Construction: Multi-coated chrome-silicon steel springs for durability and consistent performance.
• Proven Engineering: Developed and tested on the Nurburgring Nordschleife and the KW 7-post Driving Dynamic Test Center.
• Complete Hardware: Includes application-specific bump stops and dust boots to protect factory suspension components.
• Manufacturer Part Number: 2532500V

Fits select 2021-2026 BMW M2, M3, and M4 (Base, Competition, Competition xDrive, and CS).

The KW Height Adjustable Spring (H.A.S.) kit offers a significant upgrade over conventional lowering springs by providing a customizable ride height. Unlike fixed-rate springs, the H.A.S. system utilizes a threaded height adjuster that allows you to dial in your vehicle's stance even after the kit is installed. This setup is specifically engineered to maintain the full functionality of factory adaptive or electronic suspension systems, ensuring that your OE damper controls and driver assistance features remain operational.

Constructed from high-tensile chrome-silicon steel, these springs are multi-coated for long-term durability and tuned for the specific wheel loads of the BMW M-chassis. The kit includes application-specific elastomer bump stops and dust protection to prevent premature wear on factory dampers caused by road debris. By pairing these vehicle-specific spring rates with your OE dampers, you achieve more agile steering behavior and improved dynamics without sacrificing the ride quality expected of a performance-oriented vehicle.

• Continuous ride height adjustment within a tested lowering range
• Compatible with factory electronic and adaptive suspension systems
• High-strength multi-coated chrome-silicon steel construction
• Includes vehicle-specific elastomer bump stops and dust protection
• Engineered and tested on the Nurburgring Nordschleife and KW 7-post rig
• Manufacturer Part Number: 253200EB
• Limited Lifetime Warranty with unlimited mileage

Fits 2020-2025 BMW M8 and M8 Gran Coupe, including Base and Competition models.

The KW H.A.S. (Height Adjustable Spring) kit offers a dynamic alternative to fixed lowering springs, allowing for continuous ride height adjustment even after installation. Unlike traditional springs, this system integrates with your BMW’s factory dampers, ensuring that all driver assistance systems and electronic suspension features remain fully operational. The result is more agile steering behavior and a lower center of gravity without compromising OE comfort or dampening control.

Every kit is manufactured using high-quality chrome-silicon steel, with spring rates specifically calculated for the M8's wheel loads. To ensure long-term durability and protection, KW includes vehicle-specific elastomer bump stops and a comprehensive dust protection system to shield your factory suspension from road grime and wear.

• Continuous ride height adjustment via KW height adjuster
• Preserves factory electronic and adaptive damper functionality
• High-strength, multi-coated chrome-silicon steel construction
• Vehicle-specific elastomer bump stops and dust protection included
• Tested at the KW 7-post Driving Dynamic Test Center and Nürburgring Nordschleife
• Manufacturer Part Number: 253200CW
• Limited Lifetime Warranty