The MagnaFlow 2019-2024 Chevrolet Blazer Street Series Cat-Back Performance Exhaust System 19466 brings out the personality of your 3.6L 2019-2024 Chevrolet Blazer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Chevrolet Blazer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Blazer's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19466 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19466 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Mazda 3 Street Series Axle-Back Performance Exhaust System #19459 enhances your 2019-2026 Mazda 3 with MagnaFlow’s renowned smooth tone, moderate interior noise levels and dyno-proven performance. The Mazda 3 Street Series Exhaust System provides a stealthy yet aggressive appearance to match its increased power and sound. This axle-back exhaust kit features a straight-through muffler, dual split rear 4” black chrome-finished tips and is designed to bolt on easily thanks to CNC precision robotic manufacturing, mandrel bent tubing and 2.5” diameter piping. A limited lifetime warranty and 100% steel construction ensure a durable exhaust system that will last for as long as your 2019-2026 Mazda 3 does. Whether tearing up a side street or enjoying a day at the track, the sound, performance and value of the MagnaFlow Mazda 3 Street Series Axle-Back Performance Exhaust System #19459 is hard to beat.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Jeep Loop Delete 19432 is a 2in. diameter mandrel bent stainless steel pipe that i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing for smoother transitions

This Part Fits:

The MagnaFlow 2018-2023 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19417 brings out the personality of your 3.6L 2018-2023 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System 19275 brings out the personality of your 2.7L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19275 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19275 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 2005-2012 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17115 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2005-2012 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17115 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17115's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17115 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

• Available for gas or diesel trucks and SUV's
• Available For Gas Or Diesel Trucks And SUVS
• High Flow Straight Through Design
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2006-2010 Hummer H3 Street Series Cat-Back Performance Exhaust System 16630 brings out the personality of your 3.5L, 3.7L 2006-2010 Hummer H3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Hummer H3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hummer H3's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16630 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16630 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 2001-2005 Honda Civic Street Series Cat-Back Performance Exhaust System 15712 brings out the personality of your 1.7L 2001-2005 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15712 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15712 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Performance Exhaust Tailpipe 15455 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15455 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC precision robotic manufacturing techniques
• Mandrel bent tubing

This Part Fits:

BRExhaust Direct-Fit Front Pipe Kit 107-0128 offers unparalleled quality and durability to keep your vehicle on the road. Crafted from premium stainless steel, these front pipes are meticulously engineered to seamlessly replace the factory component, meeting or exceeding original specifications. The Direct-Fit design ensures a straightforward bolt-on installation process. For your convenience, BRExhaust Direct-Fit Front Pipe Kit 107-0128 includes all essential components, such as gaskets, clamps, and necessary hardware. With a strong dedication to upholding factory standards, these front pipes guarantee a hassle-free restoration of your vehicles exhaust system to its original form and function. This Direct-Fit Front Pipe Kit is designed to fit the 1988-1995 Toyota 4Runner 2.4L & 1988-1995 Toyota Pickup 2.4L. BRExhaust Direct-Fit Front Pipe Kit 107-0128 includes (2) 2-Bolt Gaskets, (5) Nuts, (5) Bolts, (2) Ring Gaskets. BRExhaust Direct-Fit Front Pipe Kit 107-0128 features durable stainless steel construction and is covered by a 2 year warranty.

• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Bolt-on design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• Stainless steel construction with mandrel bends provides long-lasting, high corrosion resistance and durability
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0948’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2016-2024 Chevrolet Malibu 1.5L & 2018-2019 Chevrolet Malibu 1.8L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 includes (2) Nuts, (4) Washers, (3) 2.25in. Band Clamps, (1) 2-Bolt Gasket, (2) Bolts and interchanges with OE parts 22816982, 84251079. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0704 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0704’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0704 includes (1) 2.125in. U-Bolt Clamp, (4) 2.25in. U-Bolt Clamps and interchanges with OE parts 6C3A-3865-B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0704 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0511 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0511’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0511 includes (4) 3.125in. U-Bolt Clamps, (2) Washers, (2) Nuts, (2) Bolts and interchanges with OE parts BL3Z-5230-B, BL3Z-5230-F, BL3Z-5A212-D, BL3Z-5A212-E, BL3Z-5A212-F, BL3Z-5A212-G, BL3Z-5A212-J, EL3Z-5230-A. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0511 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0504’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 includes (1) 2-Bolt Gasket, (2) 2.125in. U-Bolt Clamps, (1) 2.125in. Band Clamp, (2) Nuts, (2) Bolts and interchanges with OE parts CV6Z-5230-CJ, CV6Z-5230-Q, CV6Z-5230-S, CV6Z-5230-T, CV6Z-5230-X, CV6Z-5230-Y, CV6Z-5A289-C, CV6Z-5A289-D, CV6Z-5A289-E. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0252 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0252’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2010-2017 Subaru Legacy 2.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0252 includes (1) 2-Bolt Gasket, (1) Spring Bolt Kit, (1) Donut Gasket, (1) 2.25in. U-Bolt Clamp, (2) Bolts, (2) Nuts and interchanges with OE parts 44200AJ08A, 44300AJ18A, 44300AJ18B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0252 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0185’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2001-2007 Chrysler Town & Country 3.3L & 2001-2005 Dodge Grand Caravan 3.3L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 includes (2) 2.125in. U-Bolt Clamps, (2) 2.25in. U-Bolt Clamps and interchanges with OE parts 4881 332AE, 4881 332AF, 4881 332AG, 4881 332AH, 4881 333AH, 4881 333AI, 4881 333AJ. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0094’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2006-2008 Subaru Forester 2.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 includes (1) Donut Gasket, (1) Spring Bolt Kit, (1) 2-Bolt Gasket, (2) 2.125in. U-Bolt Clamps, (2) Nuts, (2) Bolts and interchanges with OE parts 44200SA040, 44200SA041, 44300SA130, 44300SA131. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0023’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 1996-2000 Toyota 4Runner 3.4L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 includes (1) 2-Bolt Gasket, (2) Ring Gaskets, (6) Nuts, (2) 2.25in. U-Bolt Clamps, (4) Bolts and interchanges with OE parts 17403-62030, 17405-62030, 17420-62240. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Engineered for durability and long-lasting performance, this 10-pack of stainless steel clamps from MagnaFlow is built to withstand the toughest conditions. Each clamp is covered by MagnaFlow’s Limited Lifetime Warranty.

• Engineered To Create A 360 Degree Pressure Seal
• High-Strength Reaction Block
• Durable Stainless Steel
• Pack of 10

With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Engineered for durability and long-lasting performance, this 10-pack of stainless steel clamps from MagnaFlow is built to withstand the toughest conditions. Each clamp is covered by MagnaFlow’s Limited Lifetime Warranty.

• Engineered To Create A 360 Degree Pressure Seal
• High-Strength Reaction Block
• Durable Stainless Steel
• Pack of 10

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99356HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99355HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99354HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99209HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits: