Fits 1996-2002 Toyota 4Runner Base, Limited, and SR5 models.

The MagnaFlow Overland Series Cat-Back Performance Exhaust System #19538 is engineered to equip your 1996-2002 Toyota 4Runner with a deep signature note and improved trail utility. Designed specifically for the demands of overlanding, this system features undercarriage-hugging 2.5-inch mandrel-bent main piping and a no-tip, high-clearance passenger-side exit. This configuration significantly improves ground clearance and departure angles for navigating technical terrain without snagging your exhaust.

To ensure comfort during long-distance highway treks to the trailhead, MagnaFlow utilizes No Drone Technology (NDT). This system pairs a single straight-through muffler with a quarter-wave resonator to cancel out fatiguing low-frequency interior drone while maintaining the engine's natural character. Constructed from 100% stainless steel using CNC precision robotic manufacturing, this kit offers a perfect bolt-on fit and long-term corrosion resistance.

• Overland Series high-clearance design for improved departure angles
• 2.5-inch mandrel-bent stainless steel tubing
• NDT (No Drone Technology) for a quiet cabin at cruising speeds
• Dyno-proven performance gains and deep signature sound
• Complete bolt-on installation using factory mounting points
• Manufacturer Part Number: 19538

Fits 2019-2025 Chevrolet Blazer Base, Premier, and RS models (3.6L).

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19466 is engineered to unlock the personality of your V6 Blazer. This system delivers MagnaFlow's signature resonant, powerful engine tone and dyno-proven performance without sacrificing cabin comfort, maintaining moderate exterior and mild interior sound levels. The direct-fit design replaces your factory components from the catalytic converter back, utilizing extensive 3D scanning for a precise, bolt-on installation.

Constructed from 2.5-inch mandrel-bent 409 stainless steel, the kit features three straight-through mufflers that flow into a quad split rear exit. The system is finished with 3.5-inch polished, double-wall, angle-cut tips for a refined, sporty appearance. Each kit is produced using CNC precision robotic manufacturing and is backed by a limited lifetime construction warranty.

• Manufacturer Part Number: 19466
• Material: 409 Stainless Steel
• Main Piping Diameter: 2.5 inches
• Tip Diameter: 3.5 inches
• Tip Finish: Polished Welded-On Double Wall Angle Cut
• Exit Configuration: Quad Split Rear
• Sound Level: Moderate Exterior / Mild Interior
• Includes: All necessary installation hardware

Fits 2019-2025 Mazda 3 Hatchback (2.5L).

The MagnaFlow Street Series Axle-Back Performance Exhaust System #19459 provides your 2019-2025 Mazda 3 with the brand's signature smooth, deep tone and dyno-proven performance gains. Engineered for enthusiasts seeking an aggressive exterior sound without excessive cabin drone, this system features a straight-through muffler design for maximum exhaust flow and efficiency.

Built for durability and precision, this kit is constructed from 100% corrosion-resistant stainless steel using CNC precision robotic manufacturing. The mandrel-bent 2.5-inch tubing ensures consistent diameter throughout the bends, reducing backpressure. The system is finished with dual split rear exit 4-inch black chrome tips, providing a stealthy yet premium appearance for the hatchback platform.

• Construction: CNC robotic-welded stainless steel
• Tubing Diameter: 2.5 inches
• Exit Style: Dual split rear
• Tip Specification: 4-inch black chrome-finished tips
• Muffler Type: Straight-through performance muffler
• Installation: Direct bolt-on design
• Manufacturer Part Number: 19459

Fits select 2018-2024 Jeep Wrangler and 2020-2023 Jeep Gladiator models equipped with the V6-3.6L engine.

The MagnaFlow Jeep Loop Delete 19432 is a weight-optimized extension pipe designed to enhance exhaust flow and performance. This 2-inch diameter mandrel-bent pipe replaces the factory exhaust loop, utilizing precision CNC robotic manufacturing to ensure exact fitment and superior flow characteristics.

Constructed entirely from durable, corrosion-resistant stainless steel, this performance pipe is built to withstand harsh off-road conditions and heat cycles without compromising structural integrity. The mandrel-bent tubing ensures smoother exhaust gas transitions by maintaining a constant inner diameter through every bend, reducing backpressure compared to standard crush-bent alternatives.

• Pipe Diameter: 2.0 in.
• Material: 100% Stainless Steel construction
• Manufacturing: Precision CNC Robotic welds
• Bending: Mandrel-bent for maximum flow
• Manufacturer Part Number: 19432

Professional installation is highly recommended for this bolt-on extension pipe to ensure optimal alignment with your existing exhaust system.

Fits select 2018-2025 Jeep Wrangler and Wrangler Unlimited models (3.6L).

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19417 is designed to provide your Jeep Wrangler with a resonant, powerful engine tone and dyno-proven performance without sacrificing interior comfort. This direct-fit system features 2.5-inch mandrel-bent main piping and dual straight-through mufflers that exit in a dual split rear configuration. The system is finished with 4-inch black-coated, welded-on, double-wall angle-cut tips with a folded edge for a rugged, custom look.

Engineered using extensive 3D scanning for precise fitment, this exhaust replaces the factory components from the catalytic converter back. It is constructed from durable 409 stainless steel using CNC precision robotic manufacturing to ensure long-term reliability and corrosion resistance. This system is tuned to deliver moderate exterior sound levels while maintaining a mild interior cabin presence.

• Manufacturer Part Number: 19417
• Construction: 409 Stainless Steel
• Piping Diameter: 2.5 in. Mandrel Bent
• Tip Style: 4 in. Dual Split Rear Exit
• Tip Finish: Black Coated
• Muffler Type: Straight-Through
• Sound Level: Moderate Exterior / Mild Interior
• Includes: All necessary installation hardware
• Warranty: Limited Lifetime Construction; 1-Year Finish

Fits 2016-2023 Toyota Tacoma SR and SR5 models equipped with the 2.7L engine.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19275 is engineered to provide a resonant, powerful engine tone and dyno-proven performance without compromising cabin comfort. This system features a moderate exterior sound profile and a mild interior sound level, making it ideal for daily-driven trucks. The cat-back layout replaces the factory exhaust components from the catalytic converter back using 3-inch mandrel-bent stainless steel piping for maximum flow.

Constructed using CNC precision robotic manufacturing, this direct-fit kit utilizes extensive 3D scanning for a straightforward installation that bolts to factory mounting points. The system features two straight-through mufflers and terminates in a single passenger-side rear exit finished with a 4-inch polished, double-wall, angle-cut rolled edge tip.

• Main Piping Diameter: 3in.
• Muffler Type: Straight-Through (Set of 2)
• Exit Style: Single Passenger Side Rear
• Tip Size/Finish: 4in. Polished Stainless Steel
• Material: Corrosion-Resistant Stainless Steel
• Includes: All necessary installation hardware
• Manufacturer Part Number: 19275

Fits 2005-2012 Toyota Tacoma Base, Pre Runner, and X-Runner (4.0L).

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17115 is engineered for the 4.0L Toyota Tacoma owner who demands both a deep, signature exhaust note and maximum trail clearance. This weight-optimized system features a high-clearance design that hugs the undercarriage, reducing the risk of hang-ups during technical off-roading. Dyno-tested to ensure performance gains, the system delivers a very aggressive exterior sound profile and an aggressive interior tone.

Constructed from 100% stainless steel for long-term corrosion resistance, this kit utilizes 2.5-inch mandrel-bent main piping to maintain consistent flow. The straight-through muffler design eliminates backpressure, ending in a high-clearance turndown before the rear axle. Using 3D scanning during development, MagnaFlow ensures a precise direct-fit replacement for the factory components from the catalytic converter back.

• System Type: Cat-Back
• Series: Off-Road Pro Series
• Piping Diameter: 2.5 in.
• Tip Size: 3 in. Satin Single Wall Turndown Cut Edge
• Exit Style: Turndown before rear axle
• Material: Stainless Steel
• Installation: Direct-fit; bolt-on design
• Manufacturing: CNC precision robotic manufacturing
• Manufacturer Part Number: 17115

Includes all necessary hardware for installation and is backed by MagnaFlow’s limited lifetime warranty.

Fits 2006-2010 Hummer H3 models (H3-3.5L / 3.5L / 3.7L) including Base, Adventure, Luxury, and X trims.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16630 is engineered to improve exhaust flow and deliver a resonant, powerful engine tone without compromising interior comfort. This system provides a moderate exterior sound profile and a mild interior drone, making it ideal for daily driving. Built from durable, corrosion-resistant stainless steel, the 16630 replaces the factory components from the catalytic converter back using a direct-fit design developed through extensive 3D scanning.

This kit features 2.5-inch mandrel-bent main piping leading to dual straight-through mufflers for maximum efficiency. The system concludes in a dual split rear exit featuring 3.5-inch polished, welded-on double-wall angle-cut folded-edge tips for a premium aesthetic finish. Each system is manufactured using CNC precision robotic techniques and includes a limited lifetime construction warranty.

• Part Number: 16630
• Piping Diameter: 2.5 in.
• Tip Diameter: 3.5 in.
• Exit Style: Dual Split Rear
• Muffler Type: Straight-Through
• Material: Stainless Steel
• Installation: Direct-Fit Bolt-On

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15712 is engineered to deliver a resonant, powerful engine tone and dyno-proven performance for the 2001-2005 Honda Civic (1.7L). This direct-fit system replaces factory exhaust components from the catalytic converter back, utilizing extensive 3D scanning during development to ensure a precise, bolt-on installation.

Constructed from durable, corrosion-resistant stainless steel using CNC precision robotic manufacturing, the system features 2.25-inch mandrel-bent main piping for optimized flow. The exhaust note is managed by two straight-through mufflers, resulting in moderate exterior and mild interior sound levels. The system is finished with a single passenger-side rear exit featuring a 4-inch polished, double-wall, angle-cut folded-edge tip.

• Fits select 2001-2005 Honda Civic DX, EX, LX, Special Edition, and Value Package models (1.7L).
• 2.25-inch mandrel-bent stainless steel tubing for maximum exhaust flow.
• Dual straight-through mufflers provide a signature resonant sound.
• 4-inch polished welded-on double wall angle cut folded edge tip.
• Direct-fit design with all necessary hardware for installation.
• Limited lifetime construction warranty and 1-year finish warranty.
• Manufacturer Part Number: 15712

Fits select 1999-2007 Ford F-150, F-250, F-350 Super Duty, and Excursion models (7.3L).

The MagnaFlow 15455 Performance Exhaust Universal Tailpipe is engineered to optimize exhaust flow and durability for your truck. This component is manufactured using advanced CNC precision robotic techniques to ensure consistent fitment and performance. The assembly features mandrel-bent tubing, which maintains a constant diameter through every bend to eliminate flow restrictions and reduce backpressure.

Constructed from high-grade, corrosion-resistant stainless steel, this tailpipe is designed to withstand the harsh conditions of diesel exhaust systems. As a universal component, it is designed for builders and technicians looking for a high-quality exhaust solution that integrates with custom or existing systems. Professional installation is highly recommended to ensure proper clearance and mounting.

• Manufacturer Part Number: 15455
• Material: Durable corrosion-resistant stainless steel
• Construction: Mandrel-bent tubing for maximum flow
• Manufacturing: CNC precision robotic manufacturing
• Universal tailpipe assembly for performance applications

Fits select 1988-1995 Toyota 4Runner and Pickup models (2.4L).

The BRExhaust Direct-Fit Front Pipe Kit 107-0128 is engineered to restore your vehicle's exhaust system with factory-level precision. Constructed from high-grade stainless steel with mandrel bends, this front pipe provides superior corrosion resistance and maintains consistent exhaust flow. Designed as a direct bolt-on replacement, it installs using factory mounting points without requiring specialized fabrication or welding, while keeping all original emissions equipment fully intact.

This comprehensive kit includes everything needed for a successful installation, packaged in a single protective box for convenience. Each component is manufactured to meet or exceed OE specifications for long-lasting durability on and off the road.

• Material: Durable stainless steel with mandrel bends
• Fitment Type: Direct-fit bolt-on installation
• Emissions: Maintains original emissions equipment compliance
• Manufacturer Part Number: 107-0128
• Warranty: Two-year, unlimited mileage warranty

Kit Includes:

• (2) 2-Bolt Gaskets
• (2) Ring Gaskets
• (5) Bolts
• (5) Nuts

Fits 2016-2024 Chevrolet Malibu (1.5L / 1.8L).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 is designed to restore your vehicle’s exhaust performance with a precision-engineered, bolt-on solution. Unlike standard aftermarket systems that use crush-bent tubing, this kit features mandrel-bent aluminized steel pipes to maintain a constant diameter through every curve, facilitating superior exhaust flow and reducing backpressure. This multi-piece system replaces all components behind or near the last catalytic converter, keeping your emissions equipment fully intact.

Constructed for durability and high corrosion resistance, this kit is designed for a straightforward DIY installation. The bolt-on architecture allows you to navigate chassis obstructions without the need for specialized bending or welding. Every kit is packaged with the necessary gaskets and clamps required to complete the job right the first time.

• Construction: Durable aluminized steel for corrosion resistance
• Design: Precision mandrel-bent tubing for optimized exhaust flow
• Installation: Direct-fit, multi-piece bolt-on design; no welding or bending required
• Hardware Included: (3) 2.25in band clamps, (1) 2-bolt gasket, (2) bolts, (2) nuts, and (4) washers
• OE Interchange: Replaces OE parts 22816982 and 84251079
• MPN: 106-0948
• Warranty: 2-year unlimited mileage warranty

Fits 1983-1986 Ford F-100, F-150, and F-250 trucks. This BRExhaust Direct-Fit Replacement Exhaust Kit (MPN 106-0704) provides a precise, bolt-on solution to replace worn or restrictive factory exhaust components from behind the catalytic converter back.

Engineered for ease of installation, this kit utilizes precision mandrel-bent aluminized steel tubing. Unlike standard crush-bent pipes that restrict exhaust flow, these mandrel bends maintain a consistent diameter to maximize efficiency. The multi-piece, bolt-on design is specifically engineered for DIY installation, allowing you to route the system around chassis obstructions without requiring specialized bending or welding. The system is designed to keep all emissions equipment intact, ensuring your vehicle remains compliant.

• Direct-fit replacement for OE part number 6C3A-3865-B.
• Durable aluminized steel construction for long-lasting corrosion resistance.
• Mandrel-bent piping ensures superior exhaust flow over factory-style crush bends.
• Comprehensive kit includes all necessary gaskets, clamps, and hardware for a complete install.
• No welding or fabrication required; bolts directly to factory mounting points.

• Manufacturer Part Number: 106-0704
• Material: Aluminized Steel
• Inlet Clamps: (1) 2.125-inch U-Bolt Clamp
• Outlet/Main Clamps: (4) 2.25-inch U-Bolt Clamps
• Warranty: 2-Year Unlimited Mileage

Fits 2011-2014 Ford F-150 models (FX2, FX4, King Ranch, Lariat, Limited, Platinum, STX, XL, and XLT). This BRExhaust Direct-Fit Replacement Exhaust Kit (MPN 106-0511) is engineered to restore your vehicle's exhaust performance with a precision-fit system that eliminates the need for custom fabrication.

Constructed from durable aluminized steel, this kit features mandrel-bent piping to ensure consistent diameter throughout every curve. This design provides superior flow characteristics compared to standard crush-bent tubing found in lower-tier aftermarket systems. The multi-piece, bolt-on configuration allows for a straightforward installation that navigates factory obstructions without the need for welding or specialized bending tools. This kit installs behind the final catalytic converter, keeping your emissions system intact and compliant.

• Direct-fit replacement for OE parts: BL3Z-5230-B, BL3Z-5230-F, BL3Z-5A212-D, BL3Z-5A212-E, BL3Z-5A212-F, BL3Z-5A212-G, BL3Z-5A212-J, and EL3Z-5230-A
• Mandrel-bent aluminized steel tubing for improved exhaust scavenging and corrosion resistance
• Includes all necessary installation hardware: (4) 3.125-inch U-bolt clamps, (2) washers, (2) nuts, and (2) bolts
• Bolt-on design for DIY-friendly installation using factory mounting points
• Manufacturer Part Number: 106-0511
• Warranty: 2-Year Unlimited Mileage

Fits 2013-2019 Ford Escape S, SE, SEL, and Titanium models.

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 is engineered to restore your Ford Escape's exhaust system to peak performance without the complexity of custom fabrication. This comprehensive kit features precision mandrel-bent aluminized steel tubing, which maintains a consistent diameter through every turn to facilitate superior exhaust flow compared to restrictive OEM or aftermarket crush-bent pipes. Designed as a complete bolt-on solution, this multi-piece system replaces all components from behind the final catalytic converter, ensuring your emissions equipment remains intact and functional.

• Precision Fitment: Direct replacement for OE part numbers CV6Z-5230-CJ, CV6Z-5230-Q, CV6Z-5230-S, CV6Z-5230-T, CV6Z-5230-X, CV6Z-5230-Y, CV6Z-5A289-C, CV6Z-5A289-D, and CV6Z-5A289-E.
• No Fabrication Required: Fully bolt-on design eliminates the need for specialized bending or welding, making it ideal for DIY installation.
• Durable Construction: Built from high-quality aluminized steel for long-lasting corrosion resistance and thermal stability.
• Included Hardware: Includes (1) 2-bolt gasket, (2) 2.125in. U-bolt clamps, (1) 2.125in. band clamp, (2) nuts, and (2) bolts.
• Warranty: Covered by a 2-year unlimited mileage manufacturer warranty.

Fits 2010-2017 Subaru Legacy (2.5L) submodels including 2.5i, Limited, Premium, and Sport.

The BRExhaust Direct-Fit Replacement Exhaust Kit (MPN 106-0252) provides a precise, reliable solution for replacing a corroded or failing factory exhaust system. This kit is engineered to bolt directly to factory mounting points without the need for specialized bending or welding. Constructed from durable aluminized steel, the system utilizes mandrel-bent piping to maintain a consistent internal diameter, ensuring superior exhaust flow compared to restrictive crush-bent alternatives.

• Direct-fit replacement for OE part numbers 44200AJ08A, 44300AJ18A, and 44300AJ18B.
• Multi-piece, bolt-on design simplifies DIY installation around under-chassis obstructions.
• Mandrel-bent aluminized steel provides long-lasting corrosion resistance and durability.
• Complete kit includes all necessary gaskets and hardware to finish the job in one session.
• Maintains original emissions equipment placement and compliance.

Hardware Included: (1) 2-Bolt Gasket, (1) Spring Bolt Kit, (1) Donut Gasket, (1) 2.25in. U-Bolt Clamp, (2) Bolts, and (2) Nuts. Covered by a 2-year, unlimited mileage warranty.

Fits select 2001-2007 Chrysler Town & Country and 2001-2005 Dodge Grand Caravan (3.3L).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 is engineered to eliminate the complexity of exhaust repairs. This multi-piece, bolt-on system is designed to replace all components from behind the final catalytic converter, utilizing precision mandrel-bent aluminized steel tubing. Unlike standard crush-bent alternatives, these mandrel bends maintain a consistent diameter throughout the pipe to optimize exhaust flow and reduce backpressure.

Constructed for durability and corrosion resistance, this kit includes all necessary gaskets, clamps, and hardware for a professional-grade installation without the need for specialized bending or welding equipment. The design maintains all original emissions equipment to ensure continued vehicle compliance while restoring factory-level function and fitment.

• Construction: Durable Aluminized Steel
• Design: Multi-piece, mandrel-bent bolt-on system
• Includes: (2) 2.125-inch U-Bolt Clamps, (2) 2.25-inch U-Bolt Clamps, gaskets, and hardware
• Warranty: 2-Year Unlimited Mileage
• Manufacturer Part Number: 106-0185
• Interchange Part Numbers: 4881 332AE, 4881 332AF, 4881 332AG, 4881 332AH, 4881 333AH, 4881 333AI, 4881 333AJ

Fits 2006-2008 Subaru Forester X, X L.L. Bean Edition, and Sports 2.5 X models (2.5L).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 is engineered to eliminate the guesswork of exhaust repairs. This kit provides a complete replacement for components located behind the final catalytic converter, restoring factory-level performance and sound. Unlike generic replacement pipes that use restrictive crush-bending, BRExhaust utilizes precision mandrel-bent aluminized steel tubing to maintain consistent diameter through every curve, ensuring optimal exhaust flow and backpressure.

Designed for the DIY enthusiast, this multi-piece system features a 100% bolt-on design that requires no welding, cutting, or specialized fabrication. It is constructed from durable aluminized steel for long-lasting corrosion resistance and fits precisely into factory mounting locations. The kit includes all necessary gaskets and hardware to complete the installation in one session.

• Construction: Mandrel-bent aluminized steel for superior flow and durability
• Installation: Bolt-on, multi-piece design; no welding or bending required
• Emissions: Retains all factory emissions equipment for full compliance
• OE Interchange: 44200SA040, 44200SA041, 44300SA130, 44300SA131
• Included Hardware: (1) Donut Gasket, (1) Spring Bolt Kit, (1) 2-Bolt Gasket, (2) 2.125in. U-Bolt Clamps, (2) Nuts, (2) Bolts
• Warranty: 2-year, unlimited mileage warranty

Fits 1996-2000 Toyota 4Runner Limited and SR5 models (3.4L).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 provides a reliable, bolt-on solution to replace a worn or damaged factory exhaust system. Engineered to facilitate superior exhaust flow, this kit features precision mandrel-bent aluminized steel tubing, which eliminates the flow restrictions found in traditional crush-bent pipes. The multi-piece design ensures the system fits into the factory mounting positions without the need for specialized bending or welding, making it an ideal choice for DIY installation.

• Durable Construction: Manufactured from aluminized steel for high corrosion resistance and long-term durability.
• Mandrel-Bent Tubing: Optimizes exhaust flow and engine efficiency compared to OEM or crush-bent alternatives.
• Emissions Compliant: Designed to leave all original emissions equipment intact and functional.
• Complete Installation Kit: Includes (1) 2-bolt gasket, (2) ring gaskets, (6) nuts, (2) 2.25-inch U-bolt clamps, and (4) bolts.
• OE Interchange: Direct replacement for OE part numbers 17403-62030, 17405-62030, and 17420-62240.
• Warranty: Backed by a 2-year, unlimited mileage manufacturer warranty.

MagnaFlow 10163 Torca stainless steel band clamps are engineered to provide a superior, uniform 360-degree pressure seal for exhaust system connections. Unlike conventional U-bolt clamps that can crush or distort tubing, these high-torque band clamps utilize a high-strength reaction block to distribute clamping force evenly. This ensures a leak-free joint while maintaining the integrity of the exhaust pipe for easier disassembly in the future.

Constructed from durable stainless steel, these 2.75-inch clamps are built to withstand high heat and corrosive undercar environments. The 1.25-inch band width provides a broad contact surface for a secure grip, making these an essential upgrade for custom exhaust fabrication or professional-grade repairs.

• Engineered to create a 360-degree pressure seal for leak-free performance
• High-strength reaction block ensures even torque distribution
• Durable stainless steel construction resists corrosion and heat cycle fatigue
• Superior alternative to conventional U-clamps and flat band clamps
• Quantity: Pack of 10
• Clamp Diameter: 2.75 inches
• Band Width: 1.25 inches
• MPN: 10163
• Includes MagnaFlow Limited Lifetime Warranty

Secure your exhaust system with professional-grade hardware using this 10-pack of MagnaFlow Torca stainless steel band clamps (MPN 10161). Designed for 2.25-inch tubing, these clamps feature a high-torque reaction block that creates a uniform 360-degree pressure seal. This specialized design provides a significantly tighter, more reliable seal than conventional U-bolt or flat band clamps without distorting the exhaust pipe.

• Precision Fit: Sized for 2.25" diameter exhaust components with a 1.25" band width.
• High-Torque Design: Integrated reaction block ensures even clamping force across the entire circumference.
• Durable Construction: Manufactured from corrosion-resistant stainless steel for long-lasting performance in harsh conditions.
• Complete Set: Bulk 10-pack is ideal for full system installs or shop use.
• Specifications: Part Number 10161; covered by MagnaFlow’s Limited Lifetime Warranty.

Fits select 1996-2019 Acura, Chrysler, Dodge, Ford, Honda, Mazda, Plymouth, Volkswagen, and Volvo models (2.4T / 2.5T).

The MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99356HM provides a professional-grade solution for clearing check engine lights and maintaining emissions standards. This universal 2.5-inch converter is engineered for vehicles with Federal/EPA emission systems, utilizing a compact, low-mass design that enhances thermal efficiency. Constructed from high-strength 16-gauge 409 stainless steel with durable 308 stainless steel MIG welds, it is built to resist corrosion and maximize service life on high-mileage applications.

• Optimized Emissions Control: Expertly formulated catalyst blend ensures efficient emissions reduction for OBDII Federally registered vehicles.
• Durable Construction: 16-gauge 409 stainless steel tubing and single laser fusion welds provide exceptional leak resistance and longevity.
• Compact Design: Lightweight construction allows for installation in confined exhaust paths where space is limited.
• Compliance Standards: Designed to meet or exceed Federal emissions requirements set by the EPA (not for sale in CA or CO).
• Installation Note: As a universal component, this part requires cutting and welding for a secure, leak-free fit.

• Manufacturer Part Number: 99356HM
• Inlet/Outlet Diameter: 2.5in
• Material: 409 Stainless Steel
• Weld Material: 308 Stainless Steel
• Compliance: EPA / Federal HM Grade

Fits select 1995-2014 Acura, Audi, Chrysler, Dodge, Ford, Mazda, Plymouth, Toyota, and Volkswagen vehicles (1.8T).

The MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99355HM is engineered to restore exhaust system efficiency and keep your check engine light off. Designed for OBDII vehicles with Federal/EPA emission systems, this universal-fit component features a compact, low-mass design that maximizes thermal efficiency and allows for installation in confined spaces. Its high-strength 16-gauge 409 stainless steel tubing is built for exceptional corrosion resistance and a long service life.

• Inlet/Outlet Diameter: 2.25 in.
• Body Material: 409 Stainless Steel
• Weld Material: 308 Stainless Steel MIG welds
• Construction: Single laser fusion weld to prevent exhaust leaks
• Compliance: EPA/Federal OBDII (Non-CARB compliant)
• Installation: Universal design; welding required
• Manufacturer Part Number: 99355HM

Each unit is expertly formulated with a catalyst blend to ensure optimal emissions control, replicating OEM-like flow dynamics to maintain factory performance and fuel efficiency.

Fits select 1996-2011 Acura, Audi, BMW, Ford, Honda, Mercury, and Toyota models (including Honda Accord, Civic, Element, and Acura TL). This universal catalytic converter is engineered for vehicles with Federal/EPA emission systems, providing a heavy-metal (HM) catalyst load to ensure your OBDII check engine light remains off while meeting legal emissions standards.

Constructed for longevity in high-heat environments, the MagnaFlow 99354HM features a 16-gauge 409 stainless steel body with 308 stainless steel MIG welds. The single laser fusion weld design minimizes the risk of exhaust leaks, while the compact, low-mass profile allows for installation in tight chassis configurations. As a universal part, this unit replaces worn or failed OE converters but requires professional cutting and welding for installation.

• Manufacturer Part Number: 99354HM
• Inlet/Outlet Diameter: 2.00 inch
• Compliance: Federal EPA / OBDII (Non-CARB compliant)
• Material: 409 Stainless Steel tubing and body
• Welding: 308 Stainless Steel MIG welds
• Installation: Universal design requires welding
• Design: High-efficiency catalyst blend for optimal flow and emissions control

The MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99209HM is engineered to restore emissions performance for select 1996-2011 BMW, Buick, Cadillac, Chevrolet, Ford, GMC, and Pontiac vehicles. This universal-fit component is designed to meet or exceed Federal EPA emissions requirements for OBDII Federally registered vehicles, helping to keep the check engine light off while maintaining factory exhaust flow dynamics.

Constructed with a 16-gauge 409 stainless steel body and durable 308 stainless steel MIG welds, this converter is built to resist corrosion and handle high thermal loads. Its compact, low-mass round body design enables installation in confined areas and maximizes thermal efficiency. As a universal part, this unit requires professional cutting and welding for a secure, leak-free installation.

• Inlet/Outlet Diameter: 3.00 inches (Center/Center)
• Body Dimensions: 9.00 inches Long x 5.125 inches Wide
• Overall Length: 13.00 inches
• Body Shape: Round
• Material: 16-Gauge 409 Stainless Steel
• Weld Type: Single Laser Fusion and 308 Stainless MIG Welds
• Compliance: HM Grade Federal/EPA (OBDII)
• Manufacturer Part Number: 99209HM