Fits select 2012-2021 Ford and Lincoln models, including Mustang EcoBoost, Focus ST/RS, Edge, and MKC (2.3L).

Ensure your engine receives consistent spark with the Mishimoto Ignition Coil Set of 4. Weak ignition coils often lead to misfires under high-load driving or spark blow-out in high-boost applications. These coils are designed and tested to meet or exceed OEM Ford performance standards, making them an essential "Stage 0" maintenance upgrade to restore idle quality and engine startup before adding power modifications.

Each coil is constructed with a robust phenolic resin frame for superior durability in high-temperature engine bays. To ensure long-term reliability, the precision-engineered lower boot seals the plug well against moisture and contamination. For a streamlined installation, the coils arrive pre-lubricated with dielectric grease to prevent corrosion and maintain a solid electrical connection between the spark plug and coil.

• Manufacturer Part Number: MMIG-FOST-1204
• Configuration: Set of 4
• Housing Material: High-strength phenolic resin
• Connection: Pre-lubricated with dielectric grease
• Performance: Meets or exceeds OEM Ford specifications
• Warranty: Mishimoto Lifetime Warranty

Fits select 2012-2021 Ford EcoSport, Edge, Escape, Explorer, Focus, Fusion, Mustang, Taurus and Lincoln MKC, MKT, and MKZ (2.3L).

Maintaining a reliable ignition system is essential for engine health, especially when running higher boost levels. The Mishimoto MMIG-FOST-12 ignition coil provides a high-quality solution to common ignition issues like misfiring under load or spark blow-out. Designed to meet or exceed OEM Ford performance standards, this single coil is an ideal replacement for worn factory units, helping to restore idle quality, improve startup, and regain lost performance.

Constructed with a robust phenolic resin frame, these coils are engineered to endure the extreme thermal cycles of the engine bay. The precision-molded lower boot acts as a critical barrier against moisture and contamination within the spark plug well. To ensure a corrosion-free connection and immediate installation, each coil is pre-lubricated with dielectric grease.

• Direct replacement for factory ignition coils (Sold Individually)
• Phenolic resin construction provides superior longevity in high-temperature environments
• Precision lower boot seals the plug well against moisture and contaminants
• Pre-lubricated with dielectric grease for an optimal electrical connection
• Restores engine startup reliability and smooths out idle quality
• Manufacturer Part Number: MMIG-FOST-12
• Includes Mishimoto Lifetime Warranty

Fits select 2010-2017 Ford F-150, F-150 SVT Raptor, F-250/F-350 Super Duty, and E-350 Super Duty (6.2L).

The Mishimoto Ignition Coil Set (MMIG-F62-10K) provides a high-quality replacement for worn or defective factory coils on Ford's 6.2L V8 engine. A weak spark often leads to misfires, rough idling, and decreased gas mileage, which can ultimately damage your catalytic converter. These coils are designed and tested to meet or exceed OEM performance standards, ensuring a reliable spark for both stock and modified vehicles.

When paired with new spark plugs, these coils restore engine startup efficiency and smooth out the idle. This direct-fit kit is an essential maintenance upgrade to ensure your ignition system is performing at its peak before adding further power modifications.

• Direct-fit replacement for 2010-2017 Ford 6.2L engines
• Designed and tested to meet or exceed OEM performance specifications
• Restores engine startup, idle quality, and overall performance
• Helps prevent misfires and catalytic converter damage
• Manufacturer Part Number: MMIG-F62-10K
• Includes Mishimoto Lifetime Warranty

Fits select 2011-2023 Ford and Lincoln vehicles, including F-150, Explorer, Expedition, Transit, and Navigator (3.5L).

Maintain the four essentials of engine performance—fuel, air, compression, and spark—with the Mishimoto Ignition Coil 6-Pack. These coils are designed and tested to meet or exceed OEM Ford performance standards, making them an ideal replacement for worn or defective factory units. A failing ignition system often results in misfiring, rough idling, and decreased fuel economy; installing these high-quality replacements restores lost performance and ensures a strong spark for both stock and modified engines.

For the best results, install these coils alongside a fresh set of spark plugs to refresh your ignition system and improve engine startup. Every set is backed by the Mishimoto Lifetime Warranty for long-term reliability.

• Manufacturer Part Number: MMIG-F35T-1106
• Direct replacement for factory ignition coils
• Ensures strong, consistent spark to prevent misfires
• Improves engine startup, idle quality, and fuel efficiency
• Designed to meet or exceed OEM performance specifications
• Includes Mishimoto Lifetime Warranty

Fits select 1990-2002 Honda Accord, Civic, Civic del Sol, and CR-V.

The Mishimoto MMIG-CIV-92 ignition coil is engineered to restore your vehicle's ignition system to peak performance. Designed as a direct replacement for worn or failing factory coils, this unit ensures a consistent, strong spark for both stock and modified engines. By returning your ignition system to "Stage 0" reliability, you can resolve common ignition-related issues such as rough idling, sluggish engine startup, and diminished power.

Each coil is rigorously tested to meet or exceed OEM Honda and Acura performance standards, providing a dependable alternative to aging factory components. Built for long-term durability and consistent voltage output, this ignition coil is backed by the Mishimoto Lifetime Warranty.

• Manufacturer Part Number: MMIG-CIV-92
• Refreshes ignition system for improved engine startup and smoother idle
• Designed and tested to meet or exceed OEM performance specifications
• Ideal for restoring performance before pursuing horsepower-adding modifications
• Includes the signature Mishimoto Lifetime Warranty

Fits select 2016-2021 Honda Accord, Civic, CR-V, Clarity, and Insight (Four-Cylinder models).

Maintaining a strong, consistent spark is critical for engine efficiency and performance, especially before adding power modifications. This Mishimoto ignition coil set provides a high-quality replacement for worn factory units, helping to eliminate misfiring under high load and preventing spark blow-out. Designed to meet or exceed OEM Honda performance standards, these coils restore engine startup reliability, stabilize idle, and ensure peak ignition efficiency.

The primary frame is constructed from robust phenolic resin, a material specifically chosen for its ability to withstand the extreme temperatures of the engine bay over long-term use. Each coil features a precision-molded lower boot that creates a tight seal against moisture and contaminants, protecting the spark plug well. For a more reliable installation, these coils come pre-lubricated with dielectric grease to ensure an optimal electrical connection and prevent terminal corrosion.

• Direct fit for select 2016-2021 Honda 4-cylinder engines
• Phenolic resin construction for superior heat resistance and longevity
• Pre-lubricated with dielectric grease for corrosion protection
• Precision lower boot prevents moisture entry into the plug well
• Designed to meet or exceed OEM performance specifications
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMIG-CIV-1604

Fits select 2002-2011 Honda Accord, Civic, CR-V, Element, S2000, and Acura RSX.

Restore reliable combustion and eliminate high-load misfires with the Mishimoto ignition coil set. Designed to meet or exceed OEM performance standards, these coils are an essential maintenance item for high-mileage vehicles or those preparing for performance modifications. Weak factory coils often lead to spark blowout or inconsistent idle; this set provides a robust replacement that ensures a strong, consistent spark throughout the RPM range.

Each coil is constructed with a primary frame made from durable phenolic resin, selected for its ability to withstand extreme engine bay heat without degrading. The precision-molded lower boots create a secure seal against moisture and contaminants, while the internal connections are pre-lubricated with dielectric grease to prevent corrosion and maximize electrical conductivity. This set of four coils allows for a complete ignition refresh to restore engine startup efficiency and idle quality.

• Direct replacement for worn or defective factory ignition coils
• High-temperature phenolic resin frame for maximum longevity
• Pre-lubricated with dielectric grease for corrosion resistance and optimal connectivity
• Precision-fit lower boot prevents plug well contamination
• Designed and tested to meet or exceed OEM Honda performance specifications
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMIG-CIV-0204

Fits select 2013-2021 Subaru (Impreza, WRX, BRZ, Crosstrek), Scion FR-S, and Toyota 86 models.

Ensure your ignition system is capable of supporting consistent performance with the Mishimoto Ignition Coil Set. For owners focusing on a Stage 0 maintenance refresh, replacing aging coils is essential to prevent misfires under high-load driving and spark blow-out. These ignition coils are designed and tested to meet or exceed OEM Subaru performance standards, restoring engine startup reliability and smoothing out the idle of your flat-four engine.

The primary frame of each coil is constructed from high-strength phenolic resin for durability in high-temperature engine bay environments. A precision lower boot provides a moisture barrier to prevent contamination in the plug well, while the pre-applied dielectric grease prevents corrosion and ensures a secure electrical connection to the spark plug.

• Direct replacement for worn or defective factory ignition coils
• Constructed from robust phenolic resin for thermal longevity
• Precision lower boot prevents moisture entry and plug contamination
• Pre-lubricated with dielectric grease for optimal connection
• Set includes four (4) ignition coils
• Manufacturer Part Number: MMIG-BRZ-1504
• Includes Mishimoto Lifetime Warranty

Fits select 2013-2021 Subaru Impreza, WRX, BRZ, and Crosstrek, 2015-2016 Scion FR-S, and 2017-2020 Toyota 86.

A properly functioning ignition system is critical for maintaining the performance of your flat-four engine. Mishimoto ignition coils are designed to provide a high-quality replacement for worn or failing factory units, addressing common issues like misfiring under high load, spark blow-out, and rough idling. These coils ensure your ignition system is performing at its peak—often referred to as "Stage 0"—before you begin adding power-increasing modifications.

Constructed from robust phenolic resin, the coil frame is built to withstand high-temperature engine bay environments for long-term durability. The precision-engineered lower boot creates a tight seal against moisture and contaminants in the spark plug well, while the pre-applied dielectric grease ensures a corrosion-free connection. Each coil is tested to meet or exceed OEM Subaru performance standards and carries a signature lifetime warranty.

• Direct-fit replacement for manufacturer part number MMIG-BRZ-15
• Restores engine startup, idle quality, and overall throttle response
• Primary frame constructed from high-strength phenolic resin for heat resistance
• Precision lower boot prevents moisture entry and spark plug contamination
• Pre-lubricated with dielectric grease for optimal conductivity and corrosion resistance
• Meets or exceeds OEM Subaru performance specifications
• Includes Mishimoto Lifetime Warranty

Fits select 2002-2019 BMW 1, 2, 3, 4, 5, 6, and 7 Series, X1, X3, X4, X5, X6, Z3, Z4, Z8, and M Models.

Ensure your BMW is performing at its peak with the Mishimoto Ignition Coil Set. Designed to meet or exceed OEM performance standards, these coils are an essential maintenance item for restoring a smooth idle, improving engine startup, and eliminating misfires under high load or spark blow-out in turbocharged applications. Whether you are performing a "Stage 0" refresh or replacing worn factory units, these coils provide the reliability needed for both daily driving and performance use.

Each coil is constructed with a robust phenolic resin frame to withstand the high-temperature environment of the BMW engine bay. The precision-engineered lower boots create a tight seal against moisture and contaminants, while pre-applied dielectric grease ensures a corrosion-free connection between the coil and spark plug. This set of six provides a complete ignition overhaul to restore lost power and efficiency.

• Direct replacement for worn or defective factory ignition coils
• Constructed from high-strength phenolic resin for heat resistance and longevity
• Precision lower boots prevent moisture entry and plug well contamination
• Pre-lubricated with dielectric grease for optimal electrical connectivity
• Manufacturer Part Number: MMIG-BMW-0206
• Includes Mishimoto Lifetime Warranty

Fits select 2002-2019 BMW 1, 2, 3, 4, 5, 6, 7 Series, M2, M3, M5, X1, X3, X4, X5, X6, Z3, Z4, and Z8 models with M54, N20, N52, N54, N55, N62, S54, or S62 engines.

Ensure your BMW's ignition system is performing at its peak with this Mishimoto ignition coil set. Weak or failing coils often result in misfires under high-load conditions or spark blowout in turbocharged applications. This set of four ignition coils is designed to meet or exceed OEM performance standards, serving as a direct-fit replacement to restore a smooth idle, improve engine startup, and ensure consistent combustion across the RPM range.

Engineered for longevity, the primary frame of each coil is constructed from high-grade phenolic resin to withstand the extreme heat of the engine bay. The precision-molded lower boots provide a tight seal against moisture and contaminants, while the internal connections are pre-lubricated with dielectric grease to prevent corrosion and maintain a secure electrical path to the spark plug.

• Direct replacement for worn or defective factory ignition coils
• Constructed with robust phenolic resin for high-temperature durability
• Pre-lubricated with dielectric grease to prevent corrosion and spark leakage
• Precision-engineered lower boot prevents moisture entry into the spark plug well
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMIG-BMW-0204

Fits select 2002-2019 BMW 1, 2, 3, 4, 5, 6, 7 Series, X-Series, Z-Series, and M-Series models.

The Mishimoto Single Ignition Coil (MMIG-BMW-02) is engineered to restore ignition system integrity and resolve common performance issues such as misfiring under high load or spark blowout in forced induction applications. Designed to meet or exceed BMW OEM performance standards, these coils are an essential maintenance component for achieving Stage 0 reliability before pursuing power-increasing modifications.

Built for durability in high-temperature engine bays, the primary frame is constructed from robust phenolic resin for long-term heat resistance. The precision-molded lower boot acts as a critical moisture barrier, preventing spark plug well contamination that can lead to electrical tracking. For a more efficient installation, each unit comes pre-lubricated with dielectric grease to ensure a corrosion-free connection and optimal conductivity between the spark plug and coil.

• Direct replacement for worn or defective factory ignition coils
• High-heat resistant phenolic resin frame construction
• Precision-molded lower boot prevents moisture entry and contamination
• Pre-lubricated with dielectric grease for optimal electrical connectivity
• Designed and tested to meet or exceed BMW OEM performance specifications
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMIG-BMW-02

Fits select 2008-2015 Honda Accord, Civic Si, CR-V, Crosstour, and Acura ILX (2.4L).

Maintaining a strong spark is critical for engine efficiency, idle stability, and fuel economy. Mishimoto ignition coils are engineered to meet or exceed OEM performance standards, providing a direct-fit replacement for worn or failing factory coils. A degraded ignition system often manifests as misfiring, rough idling, or reduced power; replacing old units with this 4-pack helps restore throttle response and ensures reliable startup for both stock and modified vehicles.

These coils are designed for long-term durability and consistent voltage output. When paired with new spark plugs, they refresh the entire ignition cycle to protect your catalytic converter and optimize combustion. Each set is backed by the Mishimoto Lifetime Warranty for peace of mind.

• Direct replacement for factory ignition coils (4-pack)
• Meets or exceeds OEM Honda performance specifications
• Restores engine startup, idle quality, and overall performance
• Designed specifically for the 2.4L engine platform
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMIG-ACRD24-0804

Fits select 2012-2020 Hyundai Accent, Veloster and Kia Rio, Soul (1.6L).

The ignition system is a critical pillar of engine performance, responsible for delivering the precise spark needed for efficient combustion. Over time, factory ignition coils can degrade, leading to weak spark, engine misfires, rough idling, and decreased fuel economy. Mishimoto ignition coils are engineered as a direct-fit replacement for worn or defective factory units, designed and tested to meet or exceed OEM Hyundai performance standards.

Installing this 4-pack of coils ensures your 1.6L engine receives a strong, consistent spark, whether the vehicle is stock or modified. When paired with fresh spark plugs, these coils help restore engine startup reliability, smooth out idle quality, and protect your catalytic converter from unburnt fuel damage. Like all Mishimoto products, these coils are backed by a signature lifetime warranty.

• Direct-fit replacement for select Hyundai and Kia 1.6L engines
• Designed and tested to meet or exceed OEM performance specifications
• Restores engine startup, idle quality, and throttle response
• Ideal for both stock maintenance and preparing for performance modifications
• Manufacturer Part Number: MMIG-ACCNT-1204
• Includes Mishimoto Lifetime Warranty

Fits select 2008-2020 Nissan 370Z and Infiniti EX37, FX37, G37, M37, Q40, Q50, Q60, Q70, QX50, and QX70 models (V6-3.7L).

Maintaining a reliable ignition system is critical for the high-revving VQ37VHR engine, especially when preparing for power-adding modifications. These Mishimoto ignition coils are engineered to meet or exceed OEM Nissan performance standards, providing a high-quality replacement for worn factory units. Upgrading to a fresh set of coils helps eliminate common issues such as low-speed misfires, poor engine startup, and spark blow-out under high-load or forced induction applications.

Built for durability in high-temperature engine bays, the primary frame of each coil is constructed from robust phenolic resin. The precision-molded lower boots create a secure barrier against moisture entry into the plug wells, preventing contamination. Each coil comes pre-lubricated with dielectric grease to ensure an optimal electrical connection and prevent corrosion at the spark plug terminal.

• Direct fit for Nissan and Infiniti 3.7L V6 engines
• Constructed from high-strength phenolic resin for heat resistance
• Precision-engineered boots prevent moisture and debris contamination
• Pre-lubricated with dielectric grease for immediate installation
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMIG-370Z-0906

Fits select 2007-2024 Nissan and Infiniti models including the 350Z, Altima, Maxima, Murano, Pathfinder, G35, QX60, and more (3.5L).

Maintain peak engine performance and prevent ignition failure with the Mishimoto ignition coil 6-pack. As a critical component of the combustion cycle, a weak or failing ignition coil can lead to engine misfires, rough idling, decreased fuel economy, and potential long-term damage to your catalytic converters. These coils are engineered and tested to meet or exceed OEM Nissan performance standards, making them a reliable solution for both routine maintenance and preparation for increased power modifications.

Designed as a direct-fit replacement for worn factory units, these coils ensure a strong, consistent spark. When paired with fresh spark plugs, they restore engine responsiveness, improve cold-start reliability, and stabilize idle quality. Each set is backed by the Mishimoto Lifetime Warranty for long-term peace of mind.

• Quantity: 6-Pack
• Direct Fit: Replaces factory coils on select 3.5L V6 engines
• Performance: Meets or exceeds OEM specifications
• Function: Restores spark intensity, improves idle, and fixes misfire issues
• Manufacturer Part Number: MMIG-350Z-0706
• Warranty: Mishimoto Lifetime Warranty

Fits select 2003-2008 Nissan (350Z, Altima, Maxima, Murano, Pathfinder, Quest) and Infiniti (EX35, FX35, G35, I35, M35, QX4) models.

Refresh your ignition system and restore lost performance with the Mishimoto Ignition Coil Set. Designed to meet or exceed OEM Nissan specifications, these coils are the ideal replacement for worn factory units that often cause stumbling idles, poor engine startup, or misfiring under load and high boost. Each coil is built with a robust phenolic resin frame to withstand high-temperature engine bay environments while maintaining long-term durability.

The precision-molded lower boot acts as a moisture barrier to prevent plug well contamination, and every unit comes pre-lubricated with dielectric grease to ensure a corrosion-free connection to the spark plug. Whether you are performing routine maintenance or prepping for modifications, this set of six provides the reliability needed for consistent spark delivery.

• Direct replacement for part number: MMIG-350Z-0306
• Set of six (6) ignition coils
• Primary frame constructed from heat-resistant phenolic resin
• Pre-lubricated with dielectric grease for optimal electrical connection
• Precision lower boot prevents moisture entry and plug contamination
• Designed to meet or exceed OEM Nissan performance standards
• Mishimoto Lifetime Warranty

Fits select 2019-2025 Subaru Ascent, WRX, Outback, and Legacy models. This Mishimoto performance charge pipe kit (MMICP-WRX-22WRD) replaces the restrictive factory plastic unit with a durable, high-flow aluminum assembly designed to withstand increased boost pressures and heat cycles without failure.

Constructed from mandrel-bent aluminum with a sleek, unobstructed interior, this kit provides a 21 percent reduction in airflow restriction compared to the stock component. This improved efficiency allows for better throttle response and greater power potential. The system features a CNC-machined quick disconnect with an integrated O-ring and a robust silicone coupler to ensure a leak-free seal at the turbo connection, even in high-output applications. Finished in a durable wrinkle red powder coat, it provides a clean, performance-oriented aesthetic for your engine bay.

• Direct fit for select 2019-2025 Subaru models
• 21% reduction in airflow restriction compared to OEM
• Durable aluminum construction prevents expansion and failure under high boost
• CNC-machined quick disconnect and O-ring for a reliable, leak-free seal
• Includes silicone coupler and necessary hardware for a complete installation
• Finish: Wrinkle Red Powder Coat
• Manufacturer Part Number: MMICP-WRX-22WRD
• Mishimoto Lifetime Warranty

Fits 2014-2018 Subaru Forester 2.0XT and 2015-2021 Subaru WRX models.

The Mishimoto MMICP-WRX-15WRD Charge Pipe Kit is engineered to replace the restrictive, weak plastic factory pipe with a high-flow, one-piece aluminum component. By utilizing a cast aluminum outlet, this kit ensures a smooth transition from the turbocharger compressor to the intercooler end tank, reducing turbulence and improving spool-up response. The larger diameter design allows for increased airflow compared to the stock unit, supporting higher power potential for the FA20DIT engine.

Designed for a straightforward installation, this kit is a direct bolt-on that requires no modifications to the engine bay and can typically be completed in under one hour. It is fully compatible with both the factory top-mount intercooler (TMIC) and the Mishimoto performance TMIC. The wrinkle red finish provides a professional, high-performance look while resisting heat and wear.

• One-piece construction with a cast aluminum pipe outlet for maximum durability
• Replaces prone-to-failure plastic OEM charge pipe
• Compatible with stock or Mishimoto top-mount intercoolers
• Includes new silicone charge-pipe-to-intercooler hose and bypass valve (BPV) hoses
• Installation time of approximately 1 hour with no modifications required
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMICP-WRX-15WRD

Fits 2014-2018 Subaru Forester 2.0XT and 2015-2021 Subaru WRX models.

Replace the restrictive, failure-prone factory plastic charge pipe in your Subaru with the Mishimoto Charge Pipe Kit. Engineered for maximum durability and airflow, this kit utilizes a one-piece construction with a cast aluminum pipe outlet. This design provides a smooth, internal size transition from the turbocharger compressor outlet to the intercooler end tank, reducing turbulence and improving spool-up.

This kit is a direct-fit component that requires no modifications to the engine bay for installation, allowing for a complete swap in under one hour. It is compatible with both the factory top-mount intercooler and the Mishimoto performance top-mount intercooler. The wrinkle black finish provides a professional, understated look that stands up to heat and engine bay conditions.

• Replaces weak plastic OE charge pipe with durable cast aluminum
• Increased diameter over stock for improved airflow and power potential
• One-piece construction ensures a smooth transition to the intercooler
• Includes new charge pipe-to-intercooler silicone hose and bypass valve hoses
• Compatible with OEM or Mishimoto top-mount intercoolers
• Installation takes less than 60 minutes with no cutting required
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMICP-WRX-15WBK

Fits 2014-2018 Subaru Forester 2.0XT and 2015-2021 Subaru WRX (Base, Limited, Premium).

The Mishimoto Charge Pipe Kit replaces the restrictive, failure-prone factory plastic unit with a high-flow aluminum assembly designed for maximum durability. Featuring a one-piece construction with a cast aluminum outlet, this kit provides a smooth, consistent transition in diameter from the turbocharger compressor outlet to the intercooler end tank. This design optimizes airflow for improved turbo spool-up and increased power potential on the FA20DIT platform.

Engineered as a direct bolt-on upgrade, this kit installs in under one hour without any engine bay modifications. It is fully compatible with both the stock top-mount intercooler and the Mishimoto performance top-mount intercooler. The kit includes application-specific silicone hoses for the intercooler and bypass valve connections to ensure a leak-free seal under boost.

• One-piece construction with cast aluminum pipe outlet for smooth airflow transitions
• Direct replacement for the weak, factory plastic charge pipe
• Compatible with factory or Mishimoto top-mount intercoolers (TMIC)
• Includes new charge-pipe-to-intercooler hose and bypass valve hoses
• Polished finish for enhanced engine bay aesthetics
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMICP-WRX-15P

Fits select 2019-2025 Toyota GR Supra and BMW 3, 5, 7, 8 Series, X3, X4, X6, and Z4 models.

Protect your B58 engine from the common failure point of the factory plastic charge pipe. The Mishimoto performance aluminum charge pipe kit replaces the fragile, restrictive OE unit with a free-flowing 3-inch mandrel-bent assembly designed to handle the increased boost of modified engines. By removing the kinks and pinched sections of the stock pipe, this kit outflows the factory setup by up to 42%.

Each kit is constructed from durable aluminum with precision CNC-machined flanges to ensure a secure, leak-free fit. The included couplers are engineered from five layers of silicone with embedded heat-resistant fibers and steel wire reinforcement to prevent ballooning under high-pressure conditions. For those running advanced setups, the pipe features two pre-installed bungs that can be drilled and tapped for boost sensors or methanol injection.

• 3-inch mandrel-bent aluminum piping reduces turbulence and improves airflow
• Outflows factory charge pipe by up to 42%
• Precision CNC-machined adapters for a secure, factory-style fit
• Five-layer, wire-reinforced silicone couplers prevent expansion under boost
• Includes two bungs for boost pressure sensors or methanol injection
• Direct-fit installation with constant-tension worm gear clamps included
• Manufacturer Part Number: MMICP-SUP-20RD
• Mishimoto Lifetime Warranty

Fits select 2019-2025 BMW 340i, 540i, 740i, 840i, X3, X4, X6, Z4, and Toyota GR Supra.

The Mishimoto MMICP-SUP-20BK performance aluminum charge pipe kit replaces the fragile and restrictive factory plastic unit with a free-flowing 3-inch mandrel-bent aluminum system. Designed to eliminate the kinks and turbulence-prone sections of the OE pipe, this upgrade increases flow by up to 42% over stock. Whether you are running a stock turbo or a high-output setup, this kit ensures your engine receives maximum airflow with professional-grade durability.

Constructed from two mandrel-bent aluminum pipes with precision CNC-machined flanges, this kit provides a secure, leak-free fitment. It features two pre-installed bungs that can be drilled and tapped for boost sensors or methanol injection. The included 5-layer silicone coupler is reinforced with heat-resistant fibers and steel wire to prevent ballooning under extreme pressure.

• 3-inch mandrel-bent aluminum piping for 42% improved flow over stock
• Micro-wrinkle black powder-coated finish for heat resistance and aesthetics
• Five-layer silicone coupler with steel wire reinforcement to prevent ballooning
• Dual bungs for optional boost pressure sensors or methanol injection
• Direct-fit installation with CNC-machined adapters and constant-tension clamps
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMICP-SUP-20BK

Fits 2016-2018 Ford Focus RS.

Maximize the efficiency of your turbo system with the Mishimoto Performance Intercooler Pipe Kit. This comprehensive kit replaces the restrictive factory hot-side and cold-side components to increase airflow volume and reduce pressure drop in the 2.3L EcoBoost system. By optimizing the path from the turbo to the intercooler and into the throttle body, this kit ensures your Mk.III RS maintains consistent boost pressure during aggressive driving.

The cold-side pipe features 5-ply, steel-wire-reinforced silicone construction, providing a 31% increase in internal volume and a 46% increase in flow over stock. This design offers the durability of aluminum with enough flexibility to simplify installation. On the hot side, Mishimoto utilizes 2.5-inch mandrel-bent aluminum piping specifically engineered to maintain critical airflow to the front Power Transfer Unit (PTU) cooler. Together, these components reduce pressure drop by up to 46% compared to the OEM equipment.

• Direct fit for 2016-2018 Ford Focus RS
• Cold-side: 5-ply wire-reinforced silicone for superior heat and pressure resistance
• Hot-side: 2.5-inch aluminum piping for maximum flow
• 46% less pressure drop on the cold-side; 45% less on the hot-side
• Engineered to prevent PTU cooler obstruction
• Silicone couplers absorb engine movement and stress
• Includes all required installation hardware
• Manufacturer Part Number: MMICP-RS-16KBK
• Mishimoto Lifetime Warranty