Fits 1997-2004 Chevrolet Corvette models, including Base, Z06, 50th Anniversary, and Pace Car editions. This radiator hose kit replaces aging factory rubber with high-grade silicone to ensure maximum cooling system reliability.

Unlike OEM rubber hoses that degrade over time from heat and pressure, Mishimoto silicone hoses are engineered for long-term durability. Each hose is constructed from five layers of high-grade silicone with heat-resistant embedded fibers, providing superior tolerance to temperature and internal pressure. This kit is ideal for daily drivers, track-day builds, and drag strip applications where consistent cooling performance is critical.

• Direct fit for the 1997-2004 C5 Corvette
• Five-layer silicone construction with heat-resistant embedded fibers
• Higher heat and pressure tolerance than factory rubber hoses
• Includes both upper and lower radiator hoses
• Includes four high-quality worm-gear clamps for a complete installation
• Manufacturer Part Number: MMHOSE-VET-97BK
• Mishimoto Lifetime Warranty

Fits 1997-2004 Chevrolet Corvette (Base, Z06, and 50th Anniversary Edition).

Standard rubber engine hoses eventually degrade, crack, and leak under the constant heat and pressure of a high-performance engine bay. The Mishimoto Silicone Ancillary Hose Kit is engineered to eliminate these failure points on the C5 Corvette. Constructed from five layers of high-grade silicone with embedded heat-resistant fibers, these hoses offer significantly higher heat and pressure tolerance than OE rubber components.

This kit is designed for a direct-fit replacement and includes the critical cooling and heater lines needed to refresh your Corvette's ancillary systems. Whether you are prepping for a track day or restoring a street-driven C5, this red silicone kit provides a boost in both cooling reliability and engine bay aesthetics. Each kit includes ten stainless steel worm-gear clamps for a complete installation.

• Replaces prone-to-failure factory rubber ancillary hoses
• Five-layer silicone construction with heat-resistant embedded fibers
• Improved pressure and heat tolerance over stock
• Finish: Red
• Manufacturer Part Number: MMHOSE-VET-97ANCRD

Kit Includes: Expansion tank hoses, upper and lower heater hoses, radiator to engine vent hose, and (10) worm-gear clamps.

Fits 1997-2004 Chevrolet Corvette models including Base, Z06, and 50th Anniversary editions.

Replace aging, failure-prone factory rubber hoses with the Mishimoto silicone ancillary hose kit. Specifically engineered for the C5 Corvette cooling system, this kit addresses common leak points by replacing the expansion tank and heater hoses with multi-layer silicone. Unlike OEM rubber that degrades over time from heat cycles and ozone exposure, these hoses are constructed from five layers of high-grade silicone with embedded heat-resistant fibers for superior pressure and temperature tolerance.

Whether you are maintaining a daily driver or preparing a Z06 for the track, this kit provides a significant increase in reliability and a cleaner engine bay aesthetic. The kit includes ten stainless steel worm-gear clamps to ensure a secure, leak-free installation on all factory connection points.

• Direct fit for 1997-2004 Chevrolet Corvette (C5)
• Constructed from 5 layers of silicone with heat-resistant embedded fibers
• Higher heat and pressure tolerance compared to factory rubber
• Includes all necessary ancillary cooling system hoses and 10 worm-gear clamps
• Manufacturer Part Number: MMHOSE-VET-97ANCBK
• Mishimoto Lifetime Warranty

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, and Grand Sport models.

Replace failure-prone factory rubber hoses with the Mishimoto silicone radiator hose kit for the C7 Corvette. Engine bay temperatures and high coolant pressures can cause standard rubber to degrade, swell, and eventually burst. This kit is engineered to provide superior reliability and heat tolerance, whether you are daily driving or pushing your Corvette on the track.

Constructed from five layers of high-grade silicone with heat-resistant embedded fibers, these hoses offer significantly better pressure resistance compared to OE components. The kit includes both the upper and lower radiator hoses and comes with four stainless steel worm-gear clamps for a direct-fit installation. This upgrade ensures your cooling system can handle the demands of the LT1 and LT4 engines while adding a professional look to the engine bay.

• Direct fit for 2014-2019 Chevrolet Corvette (Stingray, Z06, Grand Sport)
• Constructed from 5 layers of silicone with heat-resistant embedded fibers
• Includes upper and lower radiator hoses
• Includes four (4) high-quality worm-gear clamps
• Increased heat and pressure tolerance for high-performance use
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMHOSE-VET-14BK

Fits 2009-2013 Chevrolet Corvette Z06, Z06 Carbon, and 427.

Replace your vehicle's aging rubber cooling lines with the Mishimoto silicone radiator hose kit for improved reliability and performance. Unlike factory rubber which is prone to degradation and cracking over time, these hoses are constructed from five layers of high-grade silicone reinforced with heat-resistant embedded fibers. This multi-layer design provides significantly higher heat and pressure tolerance, making it an essential upgrade for C6 Corvettes heading to the drag strip or the track.

This complete kit includes both the upper and lower radiator hoses and comes with four stainless steel worm-gear clamps to ensure a secure, leak-free installation. Finished in a sleek black, this kit balances engine bay aesthetics with heavy-duty durability and is backed by the Mishimoto Lifetime Warranty.

• Direct fit for 2009-2013 Corvette Z06 and 427 models
• Constructed from five layers of silicone for maximum durability
• Heat-resistant embedded fibers increase pressure tolerance
• Includes upper and lower radiator hoses
• Includes four high-quality worm-gear clamps
• Manufacturer Part Number: MMHOSE-VET-09BK

Fits 2005-2008 Chevrolet Corvette Base, Z06, and 427 Limited Edition Z06.

Upgrade your C6 Corvette's cooling system reliability with the Mishimoto Silicone Radiator Hose Kit. Factory rubber hoses are prone to degradation over time due to constant heat cycles and ozone exposure, which can lead to brittle walls and potential leaks. This kit replaces those failure-prone OE components with high-performance silicone designed to withstand the rigors of both daily driving and competitive track use.

Each hose is constructed from five layers of high-grade silicone with embedded heat-resistant fibers, providing significantly improved pressure and temperature tolerance over stock rubber. Whether you are at the drag strip or navigating a road course, these hoses ensure your cooling system remains sealed and functional under high-stress conditions. This kit includes both the upper and lower radiator hoses along with four stainless steel worm-gear clamps for a complete installation.

• Direct fit for 2005-2008 Chevrolet Corvette (Base, Z06, 427 Edition)
• Constructed from 5 layers of silicone with heat-resistant embedded fibers
• Includes both upper and lower radiator hoses
• Includes (4) worm-gear clamps for a secure installation
• Increased heat and pressure tolerance compared to factory rubber
• Manufacturer Part Number: MMHOSE-VET-05BK
• Mishimoto Lifetime Warranty

Fits 2005-2008 Chevrolet Corvette Base and Z06 models.

Replace your vehicle's aging rubber factory hoses with the Mishimoto ancillary hose kit to ensure long-term cooling system reliability. Factory rubber hoses degrade over time from heat cycling and exposure, leading to brittle walls and potential leaks. This kit provides a significant upgrade in durability for the C6 engine bay, whether for a daily driver or a track-focused Z06.

Every hose in this kit is engineered from five layers of high-grade silicone infused with heat-resistant embedded fibers. This multi-layer construction provides superior pressure tolerance and thermal resistance compared to standard OEM equipment. The kit is designed for a direct-fit installation and includes all necessary hardware to secure the connections.

• Constructed from five layers of silicone with heat-resistant embedded fibers
• Includes 8 high-quality worm-gear clamps for a complete installation
• Significantly improves heat and pressure tolerance over factory rubber
• Kit includes expansion tank hose, engine inlet coolant recovery hose, and engine outlet coolant recovery hose
• Manufacturer Part Number: MMHOSE-VET-05ANCBK
• Mishimoto Lifetime Warranty

Fits 2004-2014 Infiniti QX56 and Nissan Armada/Titan (5.6L).

Replace your vulnerable factory rubber cooling lines with the Mishimoto Silicone Coolant and Heater Hose Kit. While the VK56 engine is a powerhouse for towing and off-road applications, its standard rubber hoses eventually degrade from constant heat cycles and engine bay exposure. This red silicone kit provides a significant upgrade in both durability and engine bay aesthetics.

Mishimoto hoses are engineered from high-grade 4-ply silicone with embedded heat-resistant fibers, offering vastly superior pressure and temperature tolerances compared to OE rubber. This comprehensive kit includes the upper radiator hose, lower radiator hoses, and heater hoses to ensure your entire cooling system is reinforced. Each kit comes complete with a set of stainless steel worm gear clamps for a secure, leak-free installation.

• Direct fit for 2004-2014 Nissan/Infiniti 5.6L applications
• Constructed from 4-ply silicone with heat-resistant embedded fibers
• Includes upper/lower radiator hoses and heater hoses
• High-quality stainless steel worm gear clamps included
• Manufacturer Part Number: MMHOSE-TTN-04RD
• Mishimoto Lifetime Warranty

Fits 2000-2006 Audi TT and TT Quattro (Base, ALMS Edition, and Special Edition).

Mishimoto radiator hose kits provide an essential upgrade for the 8N-chassis cooling system by replacing aging rubber lines with high-grade silicone. Engineered for an OEM replacement fit, these hoses are constructed from dual-layer silicone with embedded heat-resistant fibers to withstand significantly higher pressures and temperatures than stock components.

This kit is designed to reduce heat and improve the reliability of your Audi's cooling circuit under demanding driving conditions. The smooth interior finish optimizes coolant flow, while the durable exterior resists degradation from oil, fuel, and engine bay heat.

• Direct fit for 2000-2006 Audi TT models
• Material: High-grade silicone with heat-resistant embedded fibers
• Maximum Temperature: 330°F (165°C)
• Finish: Black with white Mishimoto branding
• Manufacturer Part Number: MMHOSE-TT-99BK

Fits select 2003-2019 Mini Cooper models, including Base, S, John Cooper Works, Clubman, Countryman, and Paceman (1.6L Turbo engines).

Replace your vehicle's prone-to-failure rubber hoses with the Mishimoto Silicone Hose Kit. Engineered specifically for high-performance Mini Cooper applications, these hoses are built to withstand the increased heat and pressure found in turbocharged engine bays. The high-grade silicone construction is reinforced with heat-resistant embedded fibers to ensure structural integrity under load, preventing expansion and cooling system failure.

• Direct replacement for OEM radiator hoses
• Constructed from high-grade silicone with heat-resistant embedded fibers
• Provides increased pressure tolerance and efficient heat reduction
• Maximum Temperature: 330°F
• Manufacturer Part Number: MMHOSE-TINY-07RD

Fits select 2003-2019 Mini Cooper models, including Base, S, John Cooper Works, Clubman, Countryman, and Roadster (1.6L).

The Mishimoto Blue Silicone Hose Kit is an essential upgrade for any Mini owner looking to improve engine bay reliability and heat management. Factory rubber hoses are susceptible to degradation over time, becoming brittle and prone to leaks when exposed to the high-heat cycles common in turbocharged 1.6L engines. This kit replaces those wear-prone components with high-grade silicone and heat-resistant embedded fibers for superior durability.

• Direct-fit for select 2003-2019 Mini Cooper models
• Manufactured from high-grade silicone reinforced with heat-resistant fibers
• Maximum temperature rating of 330°F (165°C)
• Efficiently reduces heat and maintains pressure under load
• Manufacturer Part Number: MMHOSE-TINY-07BL

Fits select 2003-2019 Mini Cooper models, including Base, S, John Cooper Works (JCW), Clubman, Countryman, and Roadster.

Engineered to replace brittle factory rubber hoses, the Mishimoto Silicone Hose Kit provides increased pressure tolerance and heat resistance for your Mini. This kit is constructed from high-grade silicone and reinforced with heat-resistant embedded fibers to prevent hose expansion and degradation under heavy engine loads. Whether you are daily driving or pushing your Mini on the track, these hoses ensure a reliable cooling system by efficiently managing thermal stress.

• Direct-fit replacement for factory cooling hoses
• Multi-layer construction with heat-resistant embedded fibers
• Improved pressure and heat tolerance over stock rubber
• Durable black finish for a clean engine bay appearance

Technical Specifications

• Material: High-grade silicone
• Max Temperature: 330°F (165°C)
• Part Number: MMHOSE-TINY-07BK
• Finish: Black

Fits 2002-2008 Mini Cooper S.

Upgrade your cooling system with the Mishimoto silicone radiator hose kit, engineered specifically for the supercharged 2002-2008 Mini Cooper S. These hoses are a direct-fit replacement for factory rubber hoses, which are prone to cracking and failure after years of heat cycles. Constructed from a combination of high-grade silicone and heat-resistant embedded fibers, this kit offers significantly increased pressure tolerance and superior heat dissipation.

Whether you are maintaining a daily driver or prepping for the track, these hoses provide the reliability needed to prevent coolant leaks and overheating. The kit retains OEM fitment for a straightforward installation while adding a custom look to your engine bay with a durable red finish.

• Direct fit for 2002-2008 Mini Cooper S
• Max Temperature Rating: 330°F
• High-grade silicone construction with heat-resistant embedded fibers
• Increased pressure tolerance compared to OEM rubber
• Manufacturer Part Number: MMHOSE-TINY-01RD

Fits 2002-2008 Mini Cooper S models with the supercharged engine. Upgrade your cooling system with the Mishimoto silicone radiator hose kit, specifically designed as a direct-fit replacement for failure-prone OEM rubber hoses. These hoses are constructed from a combination of high-grade silicone and heat-resistant embedded fibers to handle the increased engine bay temperatures and pressures found in supercharged applications.

This kit maintains factory fitment while offering significantly improved durability and a cleaner engine bay aesthetic. Whether for a daily driver or a track-focused R53, these silicone hoses provide the reliability needed to prevent cooling system failures under high-stress conditions.

• Direct fit for 2002-2008 Mini Cooper S
• Max temperature rating of 330°F (165°C)
• High-grade silicone construction with heat-resistant reinforcement
• Includes high-quality replacement hoses for factory radiator lines
• Color: Black
• Manufacturer Part Number: MMHOSE-TINY-01BK

Fits select 2003-2015 Toyota 4Runner, FJ Cruiser, and Tacoma models (4.0L).

Protect your engine’s cooling system on and off the road with the Mishimoto Silicone Radiator Hose Kit. Designed as a high-performance replacement for degradation-prone factory rubber hoses, this kit is constructed from five layers of durable silicone embedded with heat-resistant fibers. These materials provide superior tolerance against high temperatures and increased cooling system pressures, ensuring long-term reliability for your V6 engine.

This kit includes both the upper and lower radiator hoses, finished in a rugged red to enhance your engine bay's aesthetics. Like all Mishimoto components, these hoses are engineered for a precise, direct-fit installation and are backed by the Mishimoto Lifetime Warranty.

• Direct-fit replacement for 2003-2015 Toyota 4.0L V6 engines
• Constructed from high-grade 4-ply silicone with heat-resistant embedded fibers
• Includes upper and lower radiator hoses
• Improved pressure and heat resistance over OEM rubber
• Red silicone finish
• Manufacturer Part Number: MMHOSE-TAC40-05RD
• Mishimoto Lifetime Warranty included

Fits select 2003-2015 Toyota 4Runner, FJ Cruiser, and Tacoma (4.0L).

Replace your aging, degradation-prone factory rubber hoses with the Mishimoto Silicone Radiator Hose Kit. Engineered specifically for the Toyota 4.0L V6 engine, this kit provides significantly higher heat and pressure tolerance, ensuring your cooling system remains reliable during demanding on-road driving or off-road adventures.

Each hose is constructed from high-grade 4-ply silicone with embedded heat-resistant fibers. This multi-layer construction prevents the expansion, softening, and cracking common in OE rubber components after years of heat cycles. The kit includes both the upper and lower radiator hoses in a rugged blue finish to enhance the appearance and longevity of your engine bay.

• Direct fit for 2003-2015 Toyota 4.0L V6 engines
• Constructed from 4-ply silicone with heat-resistant embedded fibers
• Superior heat and pressure tolerance compared to stock rubber
• Includes both upper and lower radiator hoses
• Corrosion-resistant blue finish
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMHOSE-TAC40-05BL

Fits 2016-2023 Toyota Tacoma models including SR, SR5, Limited, TRD Sport, TRD Off-Road, and TRD Pro (3.5L).

Replace the failure-prone factory rubber induction hose on your 3.5L Tacoma with the Mishimoto Silicone Air Intake Hose Kit. The original equipment (OE) accordion-style flex joints are susceptible to hardening and cracking over time due to engine heat and fluid exposure. These post-MAF (Mass Air Flow) leaks often cause lean air-fuel ratios, resulting in check engine lights (CEL) and reduced engine performance.

This Mishimoto kit is engineered for maximum durability, featuring 4-ply silicone construction with heat-resistant embedded fibers. To prevent collapsing under high-load conditions, the hose is built with an internal wire-reinforced design for superior structural integrity. The kit includes high-quality stainless-steel T-bolt clamps for a secure, leak-free installation.

• Direct fit for the 2016-2023 Toyota Tacoma 3.5L
• Constructed from high-grade 4-ply silicone with heat-resistant fibers
• Internal wire reinforcement prevents hose collapse and ensures structural integrity
• Eliminates post-MAF air leaks that cause lean conditions and check engine lights
• Includes heavy-duty stainless-steel T-bolt clamps
• Manufacturer Part Number: MMHOSE-TAC35-16IHBK
• Mishimoto Lifetime Warranty

Fits 2024-2025 Toyota Tacoma models with automatic transmissions, including Limited, SR, SR5, Trailhunter, and TRD series.

Standard factory rubber hoses and plastic T-fittings are common failure points, especially under the high-heat and pressure demands of towing or off-road use. This Mishimoto Silicone Coolant Hose Kit provides a significant upgrade in reliability for your 2024+ Tacoma by replacing these weak components with a direct-fit, one-piece silicone design. The integrated T-fittings eliminate brittle plastic connectors that are prone to cracking and leaking over time.

Each hose in this kit is constructed from high-grade, 4-ply silicone reinforced with heat-resistant fibers. This multi-layered construction offers superior pressure tolerance and thermal resistance compared to OE rubber. The kit includes both the upper and lower radiator hoses and premium worm-gear clamps for a secure, leak-free installation. Like all Mishimoto products, this kit is backed by the Mishimoto Lifetime Warranty.

• Direct fit for 2024-2025 Toyota Tacoma (Automatic Transmission)
• Constructed from 4-ply silicone with heat-resistant embedded fibers
• Integrated T-fittings eliminate plastic failure points
• Includes upper and lower radiator hoses
• High-quality worm-gear clamps included
• Manufacturer Part Number: MMHOSE-TAC-24ARD

Fits 2024-2025 Toyota Tacoma (AT) models including SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, Trailhunter, and Limited.

Protect your cooling system from common failure points with the Mishimoto Silicone Coolant Hose Kit. Factory rubber hoses and plastic T-fittings are prone to degradation over time, leading to cracks, leaks, and potential engine overheating. This kit features a direct-fit, one-piece silicone design that eliminates brittle plastic connectors, providing a more reliable solution for daily driving, towing, or off-road use.

Each hose is constructed from high-grade, 4-ply silicone with embedded heat-resistant fibers to withstand higher temperatures and pressures than standard OE components. The kit includes both upper and lower radiator hoses and high-quality worm-gear clamps for a complete, leak-free installation. This upgrade is backed by the Mishimoto Lifetime Warranty.

• Direct-fit for 2024-2025 Toyota Tacoma with automatic transmission
• Constructed from 4-ply silicone with heat-resistant reinforced fibers
• One-piece design eliminates weak factory plastic T-fittings
• Superior resistance to heat and pressure compared to factory rubber
• Includes upper and lower radiator hoses and premium worm-gear clamps
• Manufacturer Part Number: MMHOSE-TAC-24ABL

Fits 2024-2025 Toyota Tacoma models equipped with automatic transmissions across all trims, including SR, SR5, TRD Off-Road, and TRD Pro.

Standard factory cooling systems often rely on rubber hoses and plastic T-fittings that degrade over time, leading to cracks, leaks, and potential engine overheating. The Mishimoto Silicone Coolant Hose Kit (MMHOSE-TAC-24ABK) addresses these vulnerabilities with a high-performance, one-piece silicone design. By integrating the T-fittings directly into the hose construction, this kit eliminates brittle plastic connectors entirely, ensuring maximum reliability during heavy towing or off-road use.

Each hose is engineered from high-grade, 4-ply silicone reinforced with heat-resistant fibers for exceptional pressure and temperature tolerance. This direct-fit replacement includes both the upper and lower radiator hoses and comes complete with premium worm-gear clamps for a secure, leak-free installation. Backed by the Mishimoto Lifetime Warranty, this kit is built to outlast the factory components while maintaining a clean, professional look in your engine bay.

• Direct fit for 2024-2025 Toyota Tacoma (Automatic Transmission)
• Constructed from 4-ply silicone with heat-resistant embedded fibers
• Integrated T-fittings eliminate common plastic failure points
• Includes upper and lower radiator hoses
• Premium worm-gear clamps included for a complete installation
• Black finish for a discreet, factory-plus appearance
• Mishimoto Lifetime Warranty
• MPN: MMHOSE-TAC-24ABK

Fits 1993-1998 Toyota Supra Twin Turbo models.

Replace brittle, aging factory rubber with the Mishimoto Silicone Radiator Hose Kit (MMHOSE-SUP-93BK). These hoses are engineered as a direct OEM replacement to improve cooling system reliability for the A80 chassis. Constructed from high-grade silicone with heat-resistant embedded fibers, this kit offers superior pressure tolerance and efficient heat reduction compared to standard rubber.

• Direct fit for 1993-1998 Toyota Supra Twin Turbo
• High-grade silicone construction with dual-layer heat-resistant fibers
• Maximum temperature rating of 330°F (165°C)
• Compatible with both OEM and Mishimoto performance radiators
• Increased pressure tolerance for high-performance applications
• Manufacturer Part Number: MMHOSE-SUP-93BK

Fits 1986-1992 Toyota Supra Base and Turbo models.

The Mishimoto Silicone Heater Hose Kit provides a critical cooling system upgrade for the A70 chassis. Designed as a direct-fit replacement for the aging, brittle factory rubber hoses, this kit is engineered from high-grade silicone and reinforced with heat-resistant embedded fibers. This dual-layer construction significantly increases pressure tolerance and ensures reliable performance under elevated engine bay temperatures, preventing the failures common to original equipment.

• Direct OEM fit for 1986-1992 Toyota Supra
• Dual-layer construction: high-grade silicone with embedded heat-resistant fibers
• Maximum temperature rating: 330°F (165°C)
• Enhanced pressure resistance and efficient heat reduction
• Finish: Black silicone
• Manufacturer Part Number: MMHOSE-SUP-86HHBK

Fits 2004-2007 Subaru Impreza WRX STI and WRX STI Limited.

The Mishimoto JDM Silicone Intercooler Hose Kit is engineered as a direct-fit performance upgrade for the 2004-2007 Subaru WRX STI. These hoses replace the factory rubber components, which are prone to degradation and failure when exposed to high heat and increased boost pressures over time. Constructed from high-grade silicone and reinforced with heat-resistant embedded fibers, this kit provides superior durability and pressure tolerance compared to stock units.

Every hose features a smooth interior bore to optimize airflow and minimize turbulence entering the intercooler. Whether you are running factory boost or an aggressive aftermarket tune, these hoses ensure a secure, leak-free connection that maintains its structural integrity up to 330°F. The kit is designed to retain OEM fitment for a straightforward installation without modification.

• Direct fit for 2004-2007 Subaru Impreza WRX STI models
• High-grade silicone construction with reinforced fiber layers
• Rated for temperatures up to 330°F
• Smooth internal surface for maximum airflow efficiency
• Increased pressure tolerance for high-boost applications
• Finish: JDM Black
• Manufacturer Part Number: MMHOSE-SUBJ-INT4BK

Fits select 2005-2014 Subaru Forester, Impreza WRX, Legacy GT, and Outback XT models. This Mishimoto silicone throttle body hose is engineered to replace the failure-prone factory rubber hose, providing a more durable connection between the intercooler and throttle body.

Constructed from 100-percent high-grade silicone, this hose features internal heat-resistant embedded fibers that prevent expansion under high boost levels and withstand the extreme temperatures of the engine bay. The direct-fit design ensures a precise seal and can be installed in under an hour using standard hand tools.

• Direct fit for Subaru turbo models (2005-2014)
• 100% silicone construction for maximum durability
• Internal heat-resistant fiber reinforcement for high-pressure stability
• Red finish for a customized engine bay appearance
• Manufacturer Part Number: MMHOSE-SUB-ITBRD

Fitment:

• 2005-2006 Subaru Legacy GT
• 2005, 2007-2009 Subaru Legacy GT Limited
• 2006-2009 Subaru Legacy GT spec.B
• 2005-2006 Subaru Outback XT
• 2005-2009 Subaru Outback XT Limited
• 2009 Subaru Forester XT
• 2009-2010 Subaru Forester XT Limited
• 2011-2013 Subaru Forester XT Touring
• 2008-2014 Subaru Impreza WRX
• 2010-2014 Subaru Impreza WRX Limited
• 2009-2014 Subaru Impreza WRX Premium

Fits select 2005-2014 Subaru Forester XT, Impreza WRX, Legacy GT, and Outback XT. This Mishimoto silicone throttle body hose is engineered to replace the prone-to-fail factory rubber unit that often cracks and leaks over time, leading to boost leaks and poor engine performance.

Constructed from four layers of 100-percent silicone with heat-resistant embedded fibers, this hose offers significantly improved durability and heat tolerance compared to OE. As a direct-fit component, it bolts directly to the factory throttle body and intercooler, ensuring a secure seal under high-pressure conditions. Installation typically takes less than one hour with basic hand tools.

• Manufacturer Part Number: MMHOSE-SUB-ITBBL
• Material: 100% silicone with internal fiber reinforcement
• Direct-fit replacement for stock rubber hose
• Increased resistance to heat and pressure
• Blue finish

Fits select 2005-2014 Subaru Forester, Impreza WRX, Legacy, and Outback models.

The Mishimoto Silicone Throttle Body Hose is engineered to replace the factory rubber unit, which is prone to degradation and boost leaks over time. Designed as a direct-fit upgrade, this hose ensures a secure, airtight seal between the intercooler and the throttle body, maintaining consistent intake pressures for turbocharged Subaru engines.

• Constructed from 100% silicone with heat-resistant embedded fibers for superior pressure and temperature tolerance.
• Direct-fit replacement for factory components, requiring no trimming or modification.
• Durable multi-layer design prevents hose expansion under high boost levels.
• Typical installation time is under one hour using basic hand tools.
• Manufacturer Part Number: MMHOSE-SUB-ITBBK

Fits 2002-2005 Subaru Impreza WRX and 2005 Saab 9-2X Aero.

Reinforce your turbo system with the Mishimoto silicone intercooler hose kit. Designed to replace failure-prone factory rubber hoses that can crack or leak over time, these high-grade silicone components are reinforced with heat-resistant embedded fibers. This construction allows them to handle significantly higher boost pressures and engine bay temperatures up to 330°F without swelling or degrading.

Each hose features a smooth interior surface to minimize turbulence and maximize airflow into the top mount intercooler (TMIC). This three-piece kit is engineered for a direct OEM replacement fit, providing a durable solution for both daily drivers and modified setups. The set includes a Y-hose, a throttle body coupler, and the blow-off valve (BOV) return hose.

• Direct fit for 2002-2005 Subaru Impreza WRX and 2005 Saab 9-2X Aero
• Constructed from 4 layers of hand-wrapped silicone for superior durability
• Reinforced with heat-resistant fibers to withstand extreme conditions
• Maximum Temperature Rating: 330°F (165°C)
• Smooth bore design increases airflow efficiency to the intercooler
• Includes high-quality Y-hose, throttle body coupler, and BOV hose
• Manufacturer Part Number: MMHOSE-SUB-INTRD

Fits 2002-2005 Subaru Impreza WRX and 2005 Saab 9-2X Aero.

Replace restrictive, failure-prone factory rubber with the Mishimoto silicone intercooler hose kit. Designed specifically for the EJ-series top-mount intercooler setup, these hoses are constructed from four hand-wrapped layers of high-grade silicone fortified with heat-resistant embedded fibers. This reinforced build allows the hoses to handle significantly higher boost pressures and engine bay temperatures than stock components.

Each hose in the kit features a smooth interior surface to minimize turbulence and deliver maximum airflow to the intercooler. Engineered as a direct OEM replacement, this kit provides a secure fit and a customized look for your engine bay while ensuring long-term durability.

• Direct fit for 2002-2005 Subaru Impreza WRX and 2005 Saab 9-2X Aero
• Four-layer silicone construction with heat-resistant fibers
• Smooth internal bore for optimized airflow
• Maximum temperature rating: 330°F
• Finish: Blue
• Kit includes: Y-hose, throttle body coupler, and blow-off valve (BOV) to turbo inlet hose
• Manufacturer Part Number: MMHOSE-SUB-INTBL

Fits 2002-2005 Subaru Impreza WRX and 2005 Saab 9-2X Aero.

Replace your vehicle's aging factory rubber with the Mishimoto silicone intercooler hose kit. Designed as a direct OEM replacement, these hoses are engineered to handle the higher temperatures and increased boost pressures common in turbocharged engines. Each hose features four hand-wrapped layers of high-grade silicone fortified with heat-resistant embedded fibers for long-term durable performance.

The smooth interior surface reduces turbulence, ensuring maximum airflow to the top-mount intercooler. This kit provides the critical components needed to refresh your charge system and prevent boost leaks caused by cracked or degraded factory lines.

• Direct fit for 2002-2005 Subaru WRX and 2005 Saab 9-2X Aero
• Constructed from 4-layer silicone with heat-resistant embedded fibers
• Maximum temperature rating: 330°F
• Includes Y-hose, throttle body coupler, and blow-off valve to turbo inlet hose
• Manufacturer Part Number: MMHOSE-SUB-INTBK

Fits 2004-2008 Subaru Forester (XT, Sports, Premium) and 2006-2007 Impreza WRX (Standard, Limited, TR) models equipped with the 2.5L engine.

Replace your brittle factory rubber with the Mishimoto Silicone Intercooler Hose Kit. These high-performance hoses are engineered to withstand the increased pressures and temperatures of turbocharged applications, providing a more reliable connection than OE components. The smooth interior design minimizes turbulence to ensure maximum airflow through the intercooler system, while the red finish adds a custom look to your engine bay.

• Direct fit for 2004-2008 Subaru 2.5L turbocharged models
• Constructed from high-grade silicone with heat-resistant embedded fibers
• Smooth internal bore for improved airflow and reduced pressure drop
• Maximum temperature rating of 330°F
• Replaces worn or cracked factory intercooler hoses
• Manufacturer Part Number: MMHOSE-SUB-INT6RD