The third generation 4Runner provides impressive versatility, combining superb off-road capability with a spacious and comfortable interior. Whether you're crawling down an off-road trail or commuting to work, cooling system reliability is key to ensuring the long lifespan of your 3.4L. However, with your 4Runner navigating thousands of miles for over 20 years, chances are the stock heater hoses are beginning to show some wear. Mishimoto has you covered with our new silicone heater hose kit explicitly developed for the 1996-2002 Toyota 4Runner 3.4L. Mishimoto silicone hose kits are constructed from 4-ply silicone with heat-resistant embedded fibers to provide optimal heat and pressure tolerance. Our kit includes hoses for both the front and rear heater core connections and a complete set of high-quality worm-gear clamps for easy installation. This kit is offered in black, blue, or red silicone for those seeking to add stylish accents to their engine compartment. As with all our products, this Toyota 4Runnder Silicone Hose Kit includes our signature Lifetime Warranty.

• Constructed from high-grade 4-ply silicone with heat-resistant embedded fibers
• Superior heat and pressure tolerance
• Available in black, blue, or red

This Part Fits:

The Mishimoto Mitsubishi 3000GT 1991-1999 / Dodge Stealth 1991-1996 Silicone Hose Kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit.The perfect replacement to the stock 3000GT and Stealth hoses! Fits both turbo and non-turbo applications.

• Made of high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces heat

This Part Fits:

2008-2010 Infiniti EX35 3.5 Liter RE5R05A, 2011-2012 Infiniti G25 2.5 Liter, 2007-2008 Infiniti G35 3.5 Liter FS6R31A, 2007-2008 Infiniti G35 3.5 Liter RE5R05A, 2008-2012 Infiniti G37 3.7 Liter FS6R31A, 2008 Infiniti G37 3.7 Liter RE5R05A, 2009-2014 Nissan 370Z 3.7 Liter FS6R31A

• Constructed with high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces hea

This Part Fits:

2008-2010 Infiniti EX35 3.5 Liter RE5R05A, 2011-2012 Infiniti G25 2.5 Liter, 2007-2008 Infiniti G35 3.5 Liter FS6R31A, 2007-2008 Infiniti G35 3.5 Liter RE5R05A, 2008-2012 Infiniti G37 3.7 Liter FS6R31A, 2008 Infiniti G37 3.7 Liter RE5R05A, 2009-2014 Nissan 370Z 3.7 Liter FS6R31A

• Constructed with high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces hea

This Part Fits:

Mishimoto proudly introduces its Nissan 370Z Silicone Air Intake Hose Kit! The 370Z silicone air intake hoses are made with a combination of high grade silicone and heat-resistant embedded fibers to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay.Preventing increased intake charge temperatures will ultimately increase horsepower and provide improved performance.The air intake hose is the perfect replacement for the OEM intake piping.The Nissan 370Z Silicone Air Intake Hose Kit is available in black, blue and red, and features (4) Mishimoto T-Bolt clamps for easy installation.

• Made of high grade silicone and heat-resistant embedded fibers
• Prevents increased temperatures in the intake charge
• Max temperature of 330 F

This Part Fits:

Mishimoto silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Nissan 350Z or Infiniti G35.

• Constructed with high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces heat

This Part Fits:

Smooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.

• Fits with the stock air intake system or Mishimoto Performance Air Intake
• Up to 4 whp / 6 wtq gains over the stock rubber induction hose
• Installs in under 30 minutes

This Part Fits:

Restore your 2003-2006 Nissan 350Z with this Mishimoto Replacement Radiator Hose Kit. This kit includes the upper radiator hose, lower radiator hose, and four worm gear clamps to make installation a one-stop affair. The Mishimoto 2003-2006 Nissan 350Z hoses are constructed from OEM-quality material for long life and reliability. Whether you're entering your 2003-2006 Nissan 350Z in the local autocross, or commuting to work, trust Mishimoto and our line of Nissan parts to keep your 350Z cool. This 2003-2006 Nissan 350Z Replacement Radiator Hose Kit includes the signature Mishimoto Lifetime Warranty for a lifetime of reliability.

• Complete kit includes high-quality worm gear clamps for ease of installation
• Direct-fit replacement coolant hoses for 2003-2006 Nissan 350Z
• OEM-quality EPDM rubber resists long-term degradation

This Part Fits:

Mishimoto silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Nissan 350Z or Infiniti G35.

• Constructed with high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces heat

This Part Fits:

Mishimoto silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Nissan 350Z or Infiniti G35.

• Constructed with high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces heat

This Part Fits:

Rubber is out, silicone is in! Upgrade your old Nissan 300ZX Turbo radiator hoses with the Mishimoto 1990-96 Nissan 300ZX Turbo radiator hose kit to provide your 300ZX with an advancement in both style and reliability. This kit includes both the upper and lower 300ZX radiator hoses, as well as four worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Nissan 300ZX Turbo currently has, every Mishimoto silicone hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are launching your 300ZX down the strip or lapping at your next track day, trust Mishimoto with all your 300ZX parts. This silicone hose kit is available in black, blue, or red and, like all our Nissan 300ZX parts, includes the Mishimoto Lifetime Warranty.

• Constructed from five layers of silicone with heat-resistant embedded fibers
• Includes upper and lower radiator hoses
• Improves heat and pressure tolerance

This Part Fits:

1991-1993 Nissan 240SX Base 2.4 Liter FS5W71C, 1995-1998 Nissan 240SX Base 2.4 Liter FS5W71C, 1991-1993 Nissan 240SX Base 2.4 Liter RE4R01A, 1995-1998 Nissan 240SX Base 2.4 Liter RE4R01A, 1991-1992 Nissan 240SX LE 2.4 Liter FS5W71C, 1997-1998 Nissan 240SX LE 2.4 Liter FS5W71C, 1991-1992 Nissan 240SX LE 2.4 Liter RE4R01A, 1997-1998 Nissan 240SX LE 2.4 Liter RE4R01A, 1989-1998 Nissan 240SX SE 2.4 Liter FS5W71C, 1989-1998 Nissan 240SX SE 2.4 Liter RE4R01A, 1989-1990 Nissan 240SX XE 2.4 Liter FS5W71C, 1989-1990 Nissan 240SX XE 2.4 Liter RE4R01A

• Constructed with high grade silicone and heat-resistant embedded fibers
• Fits with Mishimoto Nissan 240SX SR20
• Max temperature of 330 F

This Part Fits:

Mishimoto silicone Nissan 240SX KA radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Nissan 240SX.

• Constructed with high grade silicone and heat-resistant embedded fibers
• Max temperature of 330 F
• Efficiently reduces heat

This Part Fits:

Mishimoto has developed a silicone vacuum hose that measures 10mm x 100cm, for those looking to upgrade their stock hoses.Mishimoto Silicone Vacuum Hose colors are available in black, blue, green, orange, red and yellow.

• 100-percent silicone construction
• Available in multiple colors
• Measures 10mm x 100cm

Introducing the Mishimoto 2023+ Nissan Z performance heat exchanger. Designed to unleash the full potential of your high-performance Z, our relentless pursuit of excellence has led us to develop a heat exchanger that perfectly fits the 2023+ Nissan Z and provides optimal cooling efficiency while enhancing overall performance.----A performance vehicle like the Nissan Z deserves a performance charge air cooling system, and this heat exchanger delivers. The 172 percent increase in core volume allows the Mishimoto heat exchanger to remove more heat, from more coolant, in less time. The result is outlet coolant temperatures 10 degrees cooler than stock in our rigorous heat soak testing. On top of that, our heat exchanger reduces pressure drop by 2 psi compared to the stock cooler. This reduction in restriction makes our cooler more efficient and puts less stress on components like the charge air cooling water pump.---- But improved performance is nothing if it doesn't last. This durable heat exchanger features high-quality aluminum end tanks that will outlast the stock plastic crimped end tanks and withstand countless heat cycles without failing. For added durability, our heat exchanger retains the stock rock guard to protect it from debris.---- The Mishimoto 2023+ Nissan Z performance heat exchanger is a direct fit for your Z with no other modifications. And, to make installation even easier, we've strategically positioned an air bleed port that allows you to purge air from the system with the bumper on. So, whether you're a seasoned enthusiast or a DIY novice, you can easily and confidently upgrade your Nissan Z.----Elevate your driving experience and unlock the true potential of your 2023+ Nissan Z with this Mishimoto performance heat exchanger. Like all our Nissan Z products, the Mishimoto 2023+ Nissan Z performance heat exchanger includes the Mishimoto Lifetime Warranty, ensuring peace of mind and complete satisfaction as long as you own your Z.

• 172 percent increase in core volume for significantly improved cooling capacity
• 39.4 percent increase in frontal surface area for improved heat transfer
• Dyno-proven 10 degree reduction in outlet temps over stock

This Part Fits:

Help keep your intake air temperatures down with the Mishimoto Performance Heat Exchanger explicitly designed for the 2020+ Toyota GR Supra 3.0L and 2019+ BMW Z4 3.0L. Air-to-water intercooling is the future for forced induction vehicles, so it's no surprise when the BMW and Toyota tag-team integrated their system directly into the intake manifold for these new aged sports cars. This might maximize the cooling efficiency of the B58, but there are still some shortcomings, especially when it comes to the A90 and G29's heat exchanger. Luckily, we here at Mishimoto have the solution.

• 5-7F drop in intake air temperatures over stock
• Includes galvanized steel stone guard
• 31-percent increase in core volume

This Part Fits:

Drop the charged air temperatures in your 2016-2024 Infiniti Q50/Q60 with the Mishimoto Performance heat exchanger. Air to water intercooling is the wave of the future when it comes to modern turbocharged vehicles, but calls for an additional heat exchanger on the front of the vehicle in order to dissipate the heat. The VR30DDTT equipped in the Q50 and Q60 is quite the performer, but the stock heat exchanger is the weak link in the chain that pulls you along. For starters, It's a relatively small core to be dissipating the heat from two individual intercoolers. On top of that, the plastic end tanks that couple the lines to the core bring durability into question over the lifespan of the vehicle. In our quest to improve the air to water intercooling system on your Infiniti, we started by vastly increasing the core size on our Performance Heat Exchanger Design. Our new core design features a 196-percent increase in core volume and 97-percent increase of external fin surface area over the stock unit. In addition, our heat exchanger also features an all-aluminum, TIG-welded construction for improved durability, as well as a removable outlet port and captive bleeder valve to help with installation. These improvements over the stock design result in an up to 21 F drop in outlet temperatures and cooler intake air temperatures. The Mishimoto 2016-2024 Infiniti Q50/Q60 3.0T Performance Heat Exchanger also includes the Mishimoto Lifetime Warranty for a worry-free installation.

• Full aluminum construction with durable, TIG-welded end tanks
• Drops heat exchanger temperatures up to 21F over stock unit
• 196-percent increase in core volume

This Part Fits:

Introducing the Mishimoto 2021+ BMW G8X M2/M3/M4 performance heat exchanger, the ultimate solution to keep your charge air cool under the most demanding conditions. In the world of forced induction vehicles, air-to-water intercooling is the future, and Mishimoto are taking it to the next level.----We started from scratch, leaving no room for compromise. Our design eliminates all plastic components, replacing them with durable aluminum end tanks, core, and CNC-machined ports. TIG-welded for maximum strength and longevity, this heat exchanger will withstand even the harshest conditions. We took it further by incorporating strutted tubes within the core, adding unparalleled resistance against bowing and flexing during aggressive cornering.----But strength is not our only focus. We've increased the core volume by 23 percent and expanded the external fin surface area by 44 percent. Combined with our dual-pass flow configuration and louvered fin design, this performance heat exchanger vastly improves cooling capacity over stock, enhancing overall performance.----Rest assured, the Mishimoto Performance Heat Exchanger for the 2021+ BMW G8X M2/M3/M4 is designed to fit perfectly with all other factory components, ensuring seamless integration into your vehicle. For added protection, we include steel rock guards to shield the heat exchanger from debris and prevent punctured tubes or crushed fins. The Mishimoto G8X M2/M3/M4 performance heat exchanger fits both automatic and manual transmissions.----The Mishimoto 2021+ BMW G8X M2/M3/M4 performance heat exchanger comes with our renowned Mishimoto Lifetime Warranty, giving you peace of mind and confidence in your investment. Upgrade your BMW G8X M2/M3/M4 with the Mishimoto Heat Exchanger and experience the true power of cooling efficiency.

• 44 percent increase in external fin surface area for greater heat transfer
• 23 percent increase in core volume improves cooling capacity
• Fits 2021+ BMW G8X M2/M3/M4

This Part Fits:

Improve the cooling capacity on your 2015-2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is the means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of the M?s packs quite a punch and while the BMW engineers laid a solid foundation for dissipating the heat from the intercooling system, but we saw some room to improve. We started by eliminating any bits of plastic from the design, and replacing the end tanks, and ports with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties, while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150mm totaling in a 60-percent increase in core volume and adding 180-percent to the external fin surface area. The end result of our improvements is a 9 F drop in global intercooling system temperatures over the stock unit. Size isn?t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4?s cooling stack, It's susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with a steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT equipped M?s. Finally, our 2015-2020 BMW F8X M3/M4 Performance Heat Exchanger also includes the Mishimoto Lifetime Warranty for a worry-free install.

• Includes durable stainless-steel stone guard for maximum protection against road debris
• 10F drop in global intercooler coolant temperatures over stock
• 60-percent increase in core volume

This Part Fits:

Mishimoto Heat Defense Tape can be used to reflect heat and protect sensitive engine components from high engine temperatures.Heat Defense is constructed of highly reflective metalized polyimide film, the same material used by the space industry to protect sensitive instruments from high temperatures.The film is laminated to glass cloth using a high temperature laminating adhesive.Heat Defense wIt'stands up to 675 F of radiant heat and self-adheres using a high temperature pressure sensitive adhesive, which is protected by an easy to remove protective backing.

• Reflects heat and protects sensitive engine components from high temperatures
• Constructed of highly reflective metalized polyimide film
• Withstands up to 675 F

Mishimoto Heat Defense Tape can be used to reflect heat and protect sensitive engine components from high engine temperatures.Heat Defense is constructed of highly reflective metalized polyimide film, the same material used by the space industry to protect sensitive instruments from high temperatures.The film is laminated to glass cloth using a high temperature laminating adhesive.Heat Defense wIt'stands up to 675 F of radiant heat and self-adheres using a high temperature pressure sensitive adhesive, which is protected by an easy to remove protective backing.

• Reflects heat and protects sensitive engine components from high temperatures
• Constructed of highly reflective metalized polyimide film
• Withstands up to 675 F

With the aggressive driving style that the Focus RS begs, comes the dark art that is heel-toe. Only the best can tame the RS with properly executed downshifts, and be rewarded with the excellent feeling of powering through a corner. At Mishimoto, we love driving our RS, and in the process of testing various parts on our engineering vehicle, we created the pedal spacer. This spacer brings the gas pedal closer to the driver?s foot and more even with the brake pedal for optimal heel-toe action. Enthusiast tested and approved, the pedal spacer is an excellent addition for any Focus RS at the track.

• Direct-fit for the 2016-2018 Ford Focus RS and 2013-2018 Ford Focus ST
• Engineered for aggressive and race inspired driving
• Made of 6061 Aluminum material

This Part Fits:

Glow plug harness failure is quite common for high mileage 7.3L and 6.0L Powerstroke models. Although many owners will find this harness damaged while performing other engine maintenance, sometimes a hard cold start is an early indicator that the harness has begun to fail. Years of high amperage glow plug draw combined with high engine bay temperatures will melt the plastic connectors, eventually resulting in shorts within the circuit. Using our extensive experience with the Ford Powerstroke, our team identified the need for a more durable and economical replacement for the factory harness. The Mishimoto Powerstroke glow plug harness includes direct-fit valve cover gaskets with integral glow plug harnesses. In addition, our kit includes replacement pigtail connectors in the case that your engine harness has also been damaged. This full replacement kit includes everything you need to restore the glow plug wiring harness. Our kit uses high-quality connectors, robust terminals, and superior seals ensuring years of reliable service. As with all our products, this glow plug harness kit includes our signature Mishimoto Lifetime Warranty.

• Includes direct-fit valve cover gaskets with integral glow plug harness and glow plug pigtail harness
• Includes everything needed to repair your faulty or melted glow plug harness
• Helps restore cold weather starting performance

This Part Fits:

Glow plug harness failure is quite common for high mileage 7.3L and 6.0L Powerstroke models. Although many owners will find this harness damaged while performing other engine maintenance, sometimes a hard cold start is an early indicator that the harness has begun to fail. Years of supporting high amperage glow plug draw combined with high engine bay temperatures will melt the plastic connectors, eventually resulting in shorts within the circuit. Using our extensive experience with the Ford Powerstroke, our team identified the need for a more durable and economical replacement for the factory harness. The Mishimoto Powerstroke glow plug harness includes direct-fit valve cover gaskets with integral glow plug harnesses. In addition, our kit includes replacement pigtail connectors in the case that your engine harness has also been damaged. This full replacement kit includes everything you need to restore the glow plug wiring harness. Our kit uses high-quality connectors, robust terminals, and superior seals ensuring years of reliable service. As with all our products, this glow plug harness kit includes our signature Mishimoto Lifetime Warranty.

• Includes direct-fit valve cover gaskets with integral glow plug harness and glow plug pigtail harness
• Includes everything needed to repair your faulty or melted glow plug harness
• Helps restore cold weather starting performance

This Part Fits:

Glow plug harness failure is quite common for high mileage 7.3L and 6.0L Powerstroke models. Although many owners will find this harness damaged while performing other engine maintenance, sometimes a hard cold start is an early indicator that the harness has begun to fail. Years of supporting high amperage glow plug draw combined with high engine bay temperatures will melt the plastic connectors, eventually resulting in shorts within the circuit. Using our extensive experience with the Ford Powerstroke, our team identified the need for a more durable and economical replacement for the factory harness. This full replacement kit includes everything you need to restore the glow plug wiring harness. Our kit uses high-quality connectors, robust terminals, and superior seals ensuring years of reliable service. As with all our products, this glow plug harness kit includes our signature Mishimoto Lifetime Warranty.

• Includes full replacement harness from glow plug connectors to engine harness connector
• Includes everything needed to repair your faulty/melted glow plug harness
• Helps restore cold weather starting performance

This Part Fits:

Glow plug harness failure is quite common for high mileage 7.3L and 6.0L Powerstroke models. Although many owners will find this harness damaged while performing other engine maintenance, sometimes a hard cold start is an early indicator that the harness has begun to fail. Years of supporting high amperage glow plug draw combined with high engine bay temperatures will melt the plastic connectors, eventually resulting in shorts within the circuit. Using our extensive experience with the Ford Powerstroke, our team identified the need for a more durable and economical replacement for the factory harness. This full replacement kit includes everything you need to restore the glow plug wiring harness. Our kit uses high-quality connectors, robust terminals, and superior seals ensuring years of reliable service. As with all our products, this glow plug harness kit includes our signature Mishimoto Lifetime Warranty.

• Includes full replacement harness from glow plug connectors to engine harness connector
• Includes everything needed to repair your faulty/melted glow plug harness
• Helps restore cold weather starting performance

This Part Fits:

You've poured everything you have into your build. It is pure personal expression. Fully refreshed and upgraded suspension. Wheels and tires suited for your objectives. Track pads that squeal at every stop. Larger turbo for more power. But in the thrill of completion, you've muddled up the engine bay with a rat's nest of rubber lines. The smell of burnt rubber emanates as a rubber line sizzles next to the exhaust manifold. Oil stains reveal that your rubber PCV hose has been rubbing on an intake bracket, causing a rupture. You gaze over to the reused stock 20-year-old rubber fuel lines. Hairline cracks in the exterior rubber layer threaten to put a fiery end to this incredible machine. It's time to upgrade your engine bay with Mishimoto -AN braided lines and fittings. Mishimoto has released an extensive lineup of -AN line fittings , unions , reducers , and adapters to help complete your project.Mishimoto -AN line fittings feature furnace brazed tubing and ends made from precision CNC-machined durable 6061 aluminum. Each fitting features a corrosion-resistant anodized finish, providing a very sleek yet subtle appearance. Mishimoto -AN line ends feature a full 360-degree swivel, making routing and final install a breeze. Mishimoto -AN aluminum adapters and reducers make transitioning to other line sizes and types painless. Our braided line fittings are engineered to withstand substantial abuse, including extreme temperatures and high pressure. Whether you're building an oil cooler setup or putting together a turbocharger oil drain, trust Mishimoto -AN line fittings to get the job done right. As with all our products, Mishimoto -AN fittings include our signature Mishimoto Lifetime Warranty.

• Available in straight, 45-degree, 90-degree, and 180-degree configurations
• CNC-machined 6061 aluminum -10AN line fitting
• Applicable with CPE rubber braided lines only

You've poured everything you have into your build. It is pure personal expression. Fully refreshed and upgraded suspension. Wheels and tires suited for your objectives. Track pads that squeal at every stop. Larger turbo for more power. But in the thrill of completion, you've muddled up the engine bay with a rat's nest of rubber lines. The smell of burnt rubber emanates as a rubber line sizzles next to the exhaust manifold. Oil stains reveal that your rubber PCV hose has been rubbing on an intake bracket, causing a rupture. You gaze over to the reused stock 20-year-old rubber fuel lines. Hairline cracks in the exterior rubber layer threaten to put a fiery end to this incredible machine. It's time to upgrade your engine bay with Mishimoto -AN braided lines and fittings. Mishimoto has released an extensive lineup of -AN line fittings , unions , reducers , and adapters to help complete your project.Mishimoto -AN line fittings feature furnace brazed tubing and ends made from precision CNC-machined durable 6061 aluminum. Each fitting features a corrosion-resistant anodized finish, providing a very sleek yet subtle appearance. Mishimoto -AN line ends feature a full 360-degree swivel, making routing and final install a breeze. Mishimoto -AN aluminum adapters and reducers make transitioning to other line sizes and types painless. Our braided line fittings are engineered to withstand substantial abuse, including extreme temperatures and high pressure. Whether you're building an oil cooler setup or putting together a turbocharger oil drain, trust Mishimoto -AN line fittings to get the job done right. As with all our products, Mishimoto -AN fittings include our signature Mishimoto Lifetime Warranty.

• Available in straight, 45-degree, 90-degree, and 180-degree configurations
• CNC-machined 6061 aluminum -10AN line fitting
• Applicable with CPE rubber braided lines only

You've poured everything you have into your build. It is pure personal expression. Fully refreshed and upgraded suspension. Wheels and tires suited for your objectives. Track pads that squeal at every stop. Larger turbo for more power. But in the thrill of completion, you've muddled up the engine bay with a rat's nest of rubber lines. The smell of burnt rubber emanates as a rubber line sizzles next to the exhaust manifold. Oil stains reveal that your rubber PCV hose has been rubbing on an intake bracket, causing a rupture. You gaze over to the reused stock 20-year-old rubber fuel lines. Hairline cracks in the exterior rubber layer threaten to put a fiery end to this incredible machine. It's time to upgrade your engine bay with Mishimoto -AN braided lines and fittings. Mishimoto has released an extensive lineup of -AN line fittings , unions , reducers , and adapters to help complete your project.Mishimoto -AN line fittings feature furnace brazed tubing and ends made from precision CNC-machined durable 6061 aluminum. Each fitting features a corrosion-resistant anodized finish, providing a very sleek yet subtle appearance. Mishimoto -AN line ends feature a full 360-degree swivel, making routing and final install a breeze. Mishimoto -AN aluminum adapters and reducers make transitioning to other line sizes and types painless. Our braided line fittings are engineered to withstand substantial abuse, including extreme temperatures and high pressure. Whether you're building an oil cooler setup or putting together a turbocharger oil drain, trust Mishimoto -AN line fittings to get the job done right. As with all our products, Mishimoto -AN fittings include our signature Mishimoto Lifetime Warranty.

• Available in straight, 45-degree, 90-degree, and 180-degree configurations
• CNC-machined 6061 aluminum -10AN line fitting
• Applicable with CPE rubber braided lines only

Adding ancillary ports to your intercooler or engine cooling system can be a challenge, especially if you don't have access to metal fabrication equipment. Our team recognized the need for an easy-to-install 1/8"-NPT adapter bung for use on existing rubber or silicone couplers. Keeping this install tidy and professional was our primary goal, which we achieved by designing a subtle fitting from high-quality materials. Our 1/8-in-NPT hose bung is precisely CNC-machined from 6061 aluminum. We've also machined space for a durable silicone O-ring to ensure a leak-free seal with both air and liquid passageways. Our 1/8-in-NPT adapter bung features a durable black anodized finish, ensuring optimal resistance against corrosion. This adapter can be installed in minutes and accepts any 1/8" NPT accessory such as injection nozzles, sending units, and sensors. As with all our products, this aluminum 1/8-in-NPT add-in bung includes our signature Mishimoto Lifetime Warranty.

• Allows for easy installation of 1/8-in-NPT sensors, injection nozzles, sending units, and other accessories
• Durable silicone O-ring seal provides leak-free performance on both fluid and air systems
• Applicable for rubber or silicone couplers within liquid or air systems