Fits 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler (CJ8) models.

Restore your interior visibility and cabin aesthetics with this pair of Omix replacement sun visors. Engineered as a direct-fit solution for missing, torn, or sagging factory units, these visors are manufactured to meet or exceed original equipment standards for fit and finish. Each visor is constructed from durable black vinyl designed to match the factory interior and features an integrated metal attachment rod for secure, adjustable positioning.

• Direct-fit replacement for original equipment part J5760699
• Manufactured from durable, interior-matching black vinyl
• Built-in metal attachment rods for structural integrity and adjustment
• Designed to utilize factory original mounting hardware (not included)
• Sold as a complete pair (driver and passenger sides)
• Manufacturer Part Number: 13301.01

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

This Omix universal seat belt bracket is engineered to solve the common issue of hard-to-reach seat belt buckles in classic Jeep applications. By extending any floor-mounted seat belt an additional 6 inches, this bracket significantly improves accessibility, particularly on vehicles where seats are mounted on aftermarket or factory risers. While designed with the Jeep CJ series in mind, this is a universal-style extension rather than a factory-original replacement for a specific mounting point.

Constructed from heavy-duty steel for durability, this bracket provides a solid mounting point to bring your belt buckle to a more ergonomic height. It is sold individually and serves as a practical upgrade for interior restoration or daily drivability improvements.

• Manufacturer Part Number: 13202.03
• Extension Length: 6 Inches
• Material: High-strength steel
• Finish: Black
• Application: Universal floor-mount (Optimized for Jeep CJ/Scrambler)
• Quantity: Sold individually

Fits select 1984-2001 Jeep Cherokee XJ and 1987-1995 Wrangler YJ.

This Omix headlight retaining ring is an OE-style replacement designed to securely hold the sealed beam headlight within the housing. Over time, factory rings can corrode, warp, or become damaged during bulb changes, leading to loose lamps and poor beam alignment. This direct-fit component restores the structural integrity of your headlamp assembly using the original mounting points.

Application-specific fitment: this ring installs on the driver side for 1984-1996 Cherokee and 1987-1995 Wrangler models. For 1997-2001 Cherokee models, it fits the passenger side. For a complete housing replacement, pair this ring with companion housing 12421.01.

• Direct replacement for OE part number: 56001278
• Restores proper headlight bulb retention and factory alignment
• Durable construction for long-lasting service life
• Easy installation into factory mounting locations
• Compatible with companion housing part number 12421.01 (sold separately)
• Manufacturer Part Number: 12421.02

Fits select 1984-2001 Jeep Cherokee XJ and 1987-1995 Jeep Wrangler YJ.

Keep your sealed beam headlights securely anchored and properly aligned with this direct OE-style replacement headlight retaining ring from Omix. Precision-engineered to match factory specifications, this ring replaces corroded or damaged hardware that can cause vibrating headlamps or poor light patterns. It bolts directly to the factory mounting points, ensuring a secure fit for the standard rectangular sealed beam units used in classic Jeep models.

Position Note: This component is position-specific. It installs on the passenger side (RH) for 1984-1996 Cherokee XJ and 1987-1995 Wrangler YJ models. For 1997-2001 Cherokee XJ models, it installs on the driver side (LH). For the companion headlight housing, use Omix part 12421.02.

• Precision-stamped metal construction for long-term durability
• Direct fit replacement for a straightforward installation
• Replaces Jeep OE Number: 56001279
• Manufacturer Part Number: 12421.01

Fits select 1984-2001 Jeep Cherokee XJ and 1987-1995 Jeep Wrangler YJ.

This Omix headlight retaining ring is a direct replacement for worn, rusted, or bent original equipment. Designed to factory specifications, it ensures your sealed beam headlight remains securely seated within the housing. Stamped from durable steel for longevity, it features correct mounting points for a hassle-free installation on either the driver or passenger side.

• Material: Steel
• Finish: OE Style
• Placement: Fits Left or Right side
• Quantity: Sold individually (2 required per vehicle)
• Manufacturer Part Number: 12420.03
• Replaces OE Number: 56001260

Fits select 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models.

This Omix headlight retainer ring provides a direct-fit solution for securing the headlight bulb within the headlight bucket. Engineered to match the dimensions and tolerances of the original factory component, this ring ensures the headlight remains properly seated and aligned for optimal beam pattern safety. It is a necessary replacement for original rings that have become corroded, bent, or damaged over time.

• Direct OE-style replacement for a precise fit
• Durable steel construction for long-term retention
• Universal design fits either the Left (Driver) or Right (Passenger) side
• Sold individually (2 required per vehicle)
• Replaces OE Part Number: 8128749
• Manufacturer Part Number: 12420.01

Fits 1987-1995 Jeep Wrangler (YJ) including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport submodels.

Restore the front-end aesthetics of your Wrangler with this Omix chrome headlight bezel. This passenger-side (RH) replacement is engineered to match the original equipment specifications, ensuring a proper fit and a factory-fresh appearance. Constructed from UV-treated chromed plastic, this bezel is designed to withstand environmental exposure without premature yellowing or degradation.

Installation is straightforward as it utilizes the factory mounting hardware. For the matching driver-side (LH) bezel, refer to part number 12419.07.

• Finish: Lustrous Chrome
• Material: UV-Treated Plastic
• Side: Passenger Side (Right)
• Installation: Uses factory hardware
• Replaces OE: 55055046
• Manufacturer Part Number: 12419.05
• Warranty: Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8). This Omix clear park lamp and turn signal lens is a direct-fit replacement for aged, cracked, or faded factory lenses, ensuring your Jeep remains visible and safe on and off the trail.

Designed to replicate the original equipment (OE) style, this lens is manufactured to strict quality standards for a precise fit within the factory housing. It is non-directional, meaning it installs on either the driver or passenger side of the vehicle. For a complete lighting restoration, two units are required per vehicle.

• Replaces OE part number: 8127449
• Finish: Clear lens
• Position: Left or right side (universal)
• Quantity: Sold individually
• Compatible with full lamp assembly 12405.06
• Manufacturer Part Number: 12405.08

Fits 1976-1986 Jeep CJ7 and Scrambler (CJ8) models. This Omix turn signal and parking light assembly provides a direct-fit replacement for aged, cracked, or non-functional factory lighting to restore visibility and safety to your Jeep's front end.

Designed to match original equipment specifications for fit and finish, this OE-style unit features a clear lens and a durable lamp housing. It is a non-handed component, meaning it fits either the driver or passenger side of the vehicle. Each assembly comes complete with the necessary bulb and wiring pigtail to facilitate a straightforward installation into the factory mounting location.

• Replaces OE part number 5752771
• Complete assembly: includes housing, lens, bulb, and pigtail
• Clear lens for a clean, factory-correct appearance
• Fits either left or right side; sold individually
• Manufacturer Part Number: 12405.06

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models. This Omix replacement tail light wiring pigtail is an essential fix for corroded, melted, or damaged rear lighting harnesses.

Designed to restore electrical integrity to your Jeep's tail lamp assembly, this harness is side-neutral and can be used on either the driver (left) or passenger (right) side. It features factory-gauge wiring and OE-style weather-tight connectors to protect against moisture intrusion and vibration. The assembly comes complete with sealed lamp sockets for a secure, plug-and-play installation that meets or exceeds original equipment standards.

• Direct fit for 2007-2018 Jeep Wrangler JK/JKU models
• Fits either Left (Driver) or Right (Passenger) side
• Features factory-spec gauge wiring and weather-tight connectors
• Equipped with sealed lamp sockets for moisture protection
• Replaces OE part number 68004166AC
• Manufacturer Part Number: 12403.49
• Limited 5-Year Warranty

Fits 1998-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models across all trim levels including SE, Sport, Sahara, Rubicon, and Unlimited.

Restore the safety and appearance of your Jeep with this Omix RH tail light assembly. Designed as a direct-fit replacement for aged, cracked, or non-functional passenger-side lamps, this unit maintains the classic factory styling and illumination performance. This assembly is engineered to meet OE specifications for fit and finish, ensuring a straightforward installation using original mounting points and wiring. For a complete rear lighting refresh, use Omix part 12403.47 for the driver-side assembly.

• Position: Right Hand (Passenger Side)
• Housing Color: Black
• Style: OE Replacement
• Installation: Direct fit to factory mounting locations
• OE Interchange: 56018648AC
• Manufacturer Part Number: 12403.48
• Warranty: Limited 5-Year Warranty

Fits 1998-2006 Jeep Wrangler TJ and Unlimited LJ including Rubicon, Sahara, Sport, SE, and X models.

Maintain your vehicle's safety and factory appearance with this Omix OE-style replacement tail light assembly. Designed specifically for the driver (left-hand) side, this direct-fit unit replaces cracked, faded, or non-functional factory housings without modifications. It features the standard black housing and lens configuration to ensure a seamless match with your existing equipment.

• Direct-fit replacement for OE part 56018649AC
• Designed for the left-hand (driver) side
• Durable black housing with OE-correct lens styling
• Restores proper illumination and rear visibility
• Replaces worn or damaged 1998-2006 Wrangler tail lights
• For the matching passenger side assembly, use part 12403.48
• Limited 5-year manufacturer warranty
• Manufacturer Part Number: 12403.47

Fits 1987-1990 Jeep Wrangler (Base, Islander, Laredo, S, Sahara, and Sport).

Maintain the original look and safety of your YJ with this Omix OE-quality replacement tail light assembly. Designed for the driver side (LH) of the vehicle, this unit features a classic black housing and is engineered as a direct-fit replacement to restore lighting functionality using factory mounting points and wiring. Whether you are performing a restoration or replacing a cracked lens, this assembly ensures your Jeep meets OE specifications for fit and finish.

• Position: Driver Side (Left Hand)
• Housing Finish: Black
• Installation: Direct Fit OE replacement
• Replaces OE Part Number: 56002135
• Manufacturer Part Number: 12403.11
• Note: For matching passenger side (RH) housing, use part 12403.12
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 1981-1986 Jeep CJ5, CJ7, and Scrambler models.

This Omix replacement tail lamp assembly is engineered to restore the original appearance and lighting performance of your classic Jeep. Designed for the passenger (right) side, this direct-fit unit features a durable black plastic housing and meets original equipment specifications for a seamless installation. It replaces worn, cracked, or faded factory lamps to ensure your vehicle remains visible and compliant on the road.

• Direct OE-style replacement for a factory-correct fit
• Durable black plastic housing with integrated lens
• Position: Right (Passenger) Side
• Replaces OE Part Number: 5758254
• Manufacturer Part Number: 12403.08
• Left side assembly available separately (Part Number: 12403.07)

Fits 1981-1986 Jeep CJ5, CJ7, and Scrambler (CJ8). This Omix tail lamp assembly is an OE-style direct replacement for the factory driver-side unit, engineered to maintain the authentic look and function of your classic Jeep. The assembly features a durable black plastic housing designed to withstand trail debris and UV exposure while providing a secure fit in the factory mounting location.

• Position: Left (Driver Side)
• Finish: Black plastic housing
• Mounting Style: Direct OE-style replacement
• Manufacturer Part Number: 12403.07
• Interchange Part Number: 5758255
• Compatibility: For the matching right-side assembly, use part number 12403.08

Each unit is manufactured to exacting standards to ensure electrical compatibility and housing fitment, making it a reliable choice for restoration or repair of 1981-1983 CJ5, 1981-1986 CJ7, and 1981-1985 Scrambler models.

Fits 1946-1975 Jeep and Willys CJ-2, CJ-3, CJ-5, and CJ-6 models.

This Omix round tail lamp assembly is a direct OE-style replacement designed to maintain the authentic look and function of your vintage Jeep. Engineered for the passenger side, this lamp features a durable metal housing and provides a reliable solution for restoring or maintaining classic Willys and Jeep CJ models. The assembly includes two mounting studs spaced at 2 inches on center for a straightforward installation into factory locations.

• Fits passenger side (Right)
• Direct replacement for OE 801158
• Durable metal housing construction
• Two mounting studs, 2 inches on center
• OE-style round design
• Manufacturer Part Number: 12403.02

Note: For the matching driver side (Left) tail lamp, use Omix part number 12403.01. Sold individually.

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models across all trim levels including Rubicon, Sahara, and Sport.

Restore the integrity of your Jeep's lighting system with the Omix Side Marker Light Wire Jumper. Over time, factory wiring can become brittle, corroded, or damaged during off-road use or fender flare removal. This replacement jumper harness provides a direct-fit solution to connect your side marker lights to the main under-hood wiring harness without the need for splicing or custom fabrication.

Engineered to meet OE specifications, this harness features the correct connector types and wire lengths for a plug-and-play installation. This is an essential component for maintaining visibility and safety standards during night driving and inspection. Sold individually; two jumpers are required per vehicle to service both the driver and passenger sides.

• Direct fit for OE-style performance and appearance
• Matches factory connector profiles for a secure, weather-tight seal
• Simplifies repair of damaged side marker circuits
• Replaces OE part number 68274527AA
• Manufacturer Part Number: 12401.36
• Limited 5-year manufacturer warranty

Fits select 1972-2006 Jeep CJ5, CJ6, CJ7, Scrambler, and Wrangler (YJ, TJ, LJ).

Restore your vehicle's lighting functionality with this Omix lamp socket assembly. Over years of trail use and exposure to the elements, factory sockets often suffer from corrosion or brittle wiring that leads to intermittent light failure. This OE-style replacement is engineered to restore a reliable electrical connection, ensuring your exterior lighting remains functional and safe.

This assembly is a direct-fit solution designed to meet or exceed original equipment standards. It simplifies the repair process by including the critical components needed to refresh your lamp housing connection in one package. Designed as a direct replacement for OE part number 5455853K.

• Includes light socket, wiring pigtail harness, and bulb
• OE-style design for a seamless direct-fit installation
• Sold individually
• Manufacturer Part Number: 12401.19
• Replaces OE: 5455853K

Fits 1997-2006 Jeep Wrangler models including SE, Sport, Sahara, Rubicon, and Unlimited (TJ/LJ).

Restore the safety and visibility of your vehicle with this Omix amber side marker lamp. Designed as a direct-fit replacement for the front passenger side (RH) housing, this lens assembly replaces factory components that have become cracked, faded, or hazed over from trail debris and UV exposure. It installs directly into the factory mounting location, ensuring a secure fit and maintaining the original equipment appearance of your Jeep.

• Location: Front Passenger Side (RH)
• Lens Color: Amber
• OE Reference: Replaces 55155628AB
• Manufacturer Part Number: 12401.08
• Installation: Bolts to factory mounting points
• Compatibility Note: For the matching driver side (LH) lamp, see part number 12401.07

Fits 1987-1995 Jeep Wrangler YJ.

Restore the safety and exterior appearance of your YJ with this OE-style amber side marker lens from Omix. Designed as a direct-fit replacement for cracked, faded, or missing factory lenses, this component helps keep your Jeep lighting system functional and compliant. The lens is manufactured to withstand exposure to the elements, featuring weather and corrosion-resistant properties suitable for both daily driving and off-road use.

• Direct replacement for factory OE 56001424
• Interchangeable fit for either left or right side
• OE-style amber finish for authentic restoration
• Sold individually (two required per vehicle)
• Manufacturer Part Number: 12401.06

Fits select 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler (CJ8) models.

Restore the safety and visibility of your vintage Jeep with this OE-quality replacement side marker light assembly from Omix. Designed as a direct-fit solution to replace faded, cracked, or non-functional fender markers, this assembly maintains the original look and function of your vehicle's lighting system. The unit is constructed for weather and corrosion resistance, ensuring it stands up to both daily driving and off-road environments.

This complete assembly simplifies the repair process by including all necessary components in one package. It features a high-impact amber lens, a bulb, and a light socket equipped with a wiring pigtail for a straightforward installation that restores factory performance.

• Direct OE-style fitment for seamless installation
• Complete assembly includes amber lens, socket, wiring pigtail, and bulb
• Weather and corrosion-resistant construction
• Replaces original equipment (OE) number 994020K
• Manufacturer Part Number: 12401.02

Fits 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models.

This Omix amber side marker light lens is a direct OE-style replacement designed to restore the visibility and original appearance of your vintage Jeep. Over years of trail use and environmental exposure, factory plastic lenses often become brittle, cracked, or faded. This replacement lens provides a clean factory look and ensures your markers remain visible to other drivers.

Built for long-term durability, the lens is engineered to be weather and corrosion resistant to handle harsh off-road conditions. The unit is designed for a universal fit, allowing it to be installed on either the left or right side of the vehicle. These lenses are sold individually; please order two if you are performing a full vehicle refresh.

• Direct fit OE-style replacement lens
• Amber finish for high-visibility signaling
• Weather and corrosion resistant construction
• Fits left or right side (interchangeable)
• Replaces OE part number 994020
• Manufacturer Part Number: 12401.01

Note: This product includes the lens only. For a complete side marker assembly including the housing, wiring, and bulb, use Omix part number 12401.02.

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Keep your Jeep's soft top secure and functional with this OE-style replacement snap from Omix. Designed specifically for the Wrangler YJ, this snap is a direct replacement for missing or broken hardware located above the door frame. It restores the factory-correct fitment and appearance of your soft top assembly without the need for modifications.

• Direct fit for 1987-1995 Wrangler YJ models
• OE-style design ensures factory look and function
• Replaces missing or damaged snaps above the door
• Sold individually (replaces OE part number 55015378)
• Manufacturer Part Number: 12306.07

Note: This listing is for a single snap. For a set of five snaps, please refer to part number 12306.10.

Fits select 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler YJ/TJ models. This Omix OE-style hardtop seal kit is engineered to restore the weatherproofing on factory hardtops, effectively eliminating rattling, excessive wind noise, and water damage caused by aged or brittle seals.

Each kit provides the critical components needed to refresh the contact points between the hardtop and the body tub or windshield frame. The rubber gasket material and foam tape provide a direct-fit solution that mirrors the original factory seals. A dedicated hardware hole punch is included to ensure precise alignment with mounting points during installation.

• Direct-fit OE style replacement for factory hardtops
• Constructed from high-quality rubber and foam materials
• Includes 3/4-inch extruded gasket material
• Includes two rolls of wide foam tape
• Includes a tube of repair sealant/glue
• Includes specialized hardware hole punch for accurate installation
• Manufacturer Part Number: 12304.07

Fits 1976-1986 Jeep CJ7 models equipped with a factory hardtop.

Restore the weather-tight seal on your classic Jeep with the Omix Hardtop Window Glass Seal. This OE-style replacement is engineered to match factory specifications, providing a direct-fit solution for aged, cracked, or leaking weatherstripping. By replacing worn seals, you effectively eliminate window rattling, cabin wind noise, and the risk of water damage to your interior.

Manufactured from durable, high-quality rubber, this seal (MPN 12304.03) ensures a precise fit and long-lasting performance against the elements. It serves as a direct replacement for original equipment part number 5461835.

• Direct OE-style fitment for factory hardtops
• Durable rubber construction resists weathering and cracking
• Eliminates wind noise and window vibration
• Prevents water intrusion and interior rust
• Replaces OE part number 5461835

Fits 2007-2018 Jeep Wrangler and Wrangler JK models equipped with full steel doors.

Exposure to the elements and frequent use eventually degrade factory weatherstripping, resulting in cabin drafts, wind noise, and moisture intrusion. This Omix front driver side (LH) full door seal provides an OE-style replacement to restore the original weather-tight barrier of your Jeep. Engineered for a precise fit on the factory steel door frame, this seal helps maintain a quiet interior and protects against water damage.

• Position: Front Left (Driver Side)
• Application: Models with full steel doors only
• Installation: Direct-fit OE replacement
• Interchange: Replaces OE 55395275AU
• Manufacturer Part Number: 12303.22
• Warranty: Limited 5-Year Warranty

For the matching passenger side (RH) front door seal, see Omix part number 12303.21.

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited.

Restore the weather-tight integrity of your vehicle with this Omix replacement front passenger side (RH) full door seal. Over time, factory weatherstripping can become brittle, compressed, or torn, leading to annoying wind whistle and water leaks during rain or car washes. This seal is engineered to OE specifications to provide a factory-quality fit and seal specifically for models equipped with full steel doors.

• Direct-fit replacement for a straightforward installation
• OE Style design matches factory appearance and function
• Engineered for passenger side (RH) front doors
• Replaces OE part number: 55395274AU
• Manufacturer Part Number: 12303.21
• Limited 5-Year Warranty

Note: Designed for full steel door models only. For the matching driver side (LH) seal, use Omix part number 12303.22.

Fits 1987-1995 Jeep Wrangler YJ models equipped with full steel doors.

This Omix outer door glass seal is a direct-fit replacement for the driver side of your Wrangler YJ. Engineered to restore the original weather-tight seal between the exterior door panel and the window glass, this rubber seal prevents water, debris, and wind noise from entering the door cavity. Maintaining a proper seal is essential for protecting internal door components, such as the window regulator and lock actuators, from corrosion and moisture damage.

• Position: Left (Driver Side)
• Material: High-quality weather-resistant rubber
• Design: OE Style direct fit
• Compatibility: For models with full steel doors only
• Replaces OE Number: 55024255
• Manufacturer Part Number: 12303.07
• Warranty: Limited 5-year warranty

For the passenger (right) side seal, please see Omix part number 12303.06.

Fits 1987-2006 Jeep Wrangler YJ and TJ models including Base, Sport, Sahara, SE, and Rubicon.

Maintain factory-correct hood alignment and eliminate vibrations with this Omix hood rubber bumper. Designed to sit between the hood and the grille, this bumper prevents metal-on-metal contact and ensures your hood rests at the intended height. This is a factory surplus part, providing an original-equipment fit and finish that meets or exceeds manufacturer specifications.

Installation is straightforward, utilizing factory mounting points. For 1987-1995 Wrangler YJ models, four bumpers are typically required; for 1997-2006 Wrangler TJ models, two are used. This part is sold individually.

• Direct OE-style replacement for a perfect fit
• Restores proper spacing between the hood and grille
• Replaces OE Part Number: 55176291
• Manufacturer Part Number (MPN): 12302.30
• Backed by a Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler JK, Wrangler JK Unlimited, and various submodels including Rubicon, Sahara, Sport, and X.

Restore the weather-tight seal on your Jeep with this Omix windshield frame to header weatherstrip. Designed as a direct OE-style replacement, this seal prevents wind noise and water intrusion where the windshield meets the soft or hard top header. It features a pre-applied, automotive-grade double-sided adhesive backing for a secure bond during installation.

• Direct fit replacement for OE part 55397454AM
• Constructed from high-quality rubber to meet or exceed factory specifications
• Includes double-sided adhesive backing
• Requires 2 rivets for complete installation (not included)
• Manufacturer Part Number: 12302.14
• Limited 5-Year Manufacturer Warranty

Note: For the matching windshield frame to cowl weatherstrip, please see part number 12302.15.