Fits all 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Laredo, Renegade, and Sport.

Restore the weather-tight seal on your Jeep with this Omix windshield frame to cowl weatherstrip. Designed as a direct fit replacement for worn or dry-rotted factory seals, this OE-style rubber gasket prevents water intrusion and reduces cabin wind noise. This essential component installs between the bottom of the windshield frame and the top of the cowl to protect your interior from water damage and eliminate rattling at highway speeds.

• Direct fit replacement for OE 55009127
• High-quality rubber construction for long-term weather resistance
• Eliminates wind noise, rattling, and potential water damage
• OE-style design for a factory-correct fit and appearance
• Manufacturer Part Number: 12302.04

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models. This Omix windshield frame to cowl weatherstrip is an OE-style replacement designed to restore the critical seal between the windshield frame and the vehicle body. Over time, original rubber seals dry out and crack, leading to cabin leaks, excessive wind noise, and annoying dashboard rattles. This direct-fit replacement ensures a weather-tight bond to protect your interior from water damage and improve overall cabin comfort.

• Direct fit for easy installation using factory mounting points
• Manufactured from high-quality rubber for long-term durability and flexibility
• Restores OE appearance and sealing performance
• Eliminates wind noise and rattling at the cowl interface
• Replaces original equipment part number 5453950

Specifications:

• Brand: Omix
• Manufacturer Part Number: 12302.03
• OE Reference: 5453950
• Material: Rubber
• Application: Windshield Frame to Cowl

Fits 1955-1975 Jeep CJ5 and Willys CJ-5 models. This Omix windshield frame to cowl weatherstrip is an OE-style replacement designed to restore the critical seal between your Jeep's folding windshield and the body tub cowl.

Constructed from high-quality rubber to match original factory specifications, this direct-fit gasket solves common issues like cabin wind noise, dashboard rattling, and water intrusion that can damage floor pans and electrical components. This seal is an essential part of any restoration or maintenance project for early CJ models.

• Direct-fit OE style replacement for 1955-1975 CJ5 and Willys CJ-5
• Constructed from durable, weather-resistant rubber
• Overall Length: 58.75 inches
• Eliminates rattling, wind noise, and water leaks
• Replaces OE Part Number: 989844
• Manufacturer Part Number: 12302.02

Fits select 1987-1995 Jeep Wrangler (YJ) models including Base, Laredo, Islander, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Maintain the weather-tight integrity of your YJ with this Omix windshield outer seal. This OE-quality replacement serves a dual purpose as both an outer weather seal and a lock strip for the windshield glass. Constructed from durable rubber to match factory specifications, it helps eliminate wind noise, rattling, and water intrusion caused by dried-out or cracked original seals. This direct-fit component ensures your Jeep remains protected from the elements while maintaining its classic look.

• Direct-fit OE style replacement for a precise installation
• Functions as both an outer seal and lock strip for the windshield
• Constructed from high-quality rubber for long-term weather resistance
• Includes the necessary connector clip for a complete installation
• Replaces original equipment part number 55134655

Note: For a complete windshield overhaul, use Omix part number 12301.05 for the inner windshield seal.

• Brand: Omix
• MPN: 12301.06
• Material: Rubber
• Position: Windshield (Outer)
• Included Hardware: Connector Clip

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models.

This Omix windshield glass seal is a direct-fit replacement engineered to restore a weather-tight seal between your glass and the windshield frame. Over time, original factory weatherstripping can dry out, crack, or shrink, leading to frustrating cabin leaks and wind noise. This OE-style rubber seal provides a precise fit to eliminate rattling and prevent water damage to your interior and dash components.

Constructed from high-quality rubber, this seal is designed to meet or exceed original equipment standards for durability and fitment, making it an essential component for any restoration or maintenance project on classic CJ-series vehicles.

• Direct-fit replacement for a proper seal between glass and frame
• Manufactured from durable, OE-style rubber
• Eliminates wind noise, rattling, and water intrusion
• Replaces OE part number: 5453949
• Manufacturer Part Number: 12301.04

Fits 1949-1975 Jeep Willys and CJ-3, CJ-5, and CJ-6 models.

Restore the weather-tight integrity of your classic Jeep with the Omix windshield glass seal. This direct-fit replacement is engineered to seal the windshield glass securely to the windshield frame, addressing common issues like water intrusion, cabin wind noise, and glass rattling. By replacing a brittle or cracked OE seal, you protect your interior from potential water damage and ensure a quieter ride.

Crafted from durable, weather-resistant rubber, this seal maintains its flexibility and profile over time for a consistent seal. It is designed as an OE-style component to maintain the original appearance of your vintage Willys or CJ-series vehicle while providing a modern solution to aging rubber components.

• Direct fit for easy installation between glass and frame
• Eliminates rattling, wind noise, and water leaks
• Constructed from high-quality rubber for long-term durability
• Replaces OE part number 978995K
• Manufacturer Part Number: 12301.03

Fits 1955-1975 Jeep CJ5 and CJ6 (including Willys models) equipped with a rear tailgate.

Reassemble your classic Jeep with confidence using this Omix 539-piece stainless steel body fastener kit. This kit provides a complete hardware solution for restoration or body assembly on 1955-1975 CJ5 and CJ6 models. By replacing factory fasteners with high-grade, corrosion-resistant stainless steel, you ensure long-lasting durability and a professional finish that resists the elements. To eliminate guesswork during installation, all hardware is organized into individual bags labeled for their specific application on the vehicle.

• Kit Contents: 539 pieces
• Material: High-grade stainless steel for maximum corrosion resistance
• Organization: Bagged and labeled by assembly point
• Compatibility: Engineered for models equipped with a rear tailgate
• Manufacturer Part Number: 12215.02

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler models. This Omix Body Tub Mounting Kit is designed to restore proper body-to-frame alignment and reduce chassis vibration. Over time, original mounting components degrade, leading to tub sag and rattles; this kit provides a direct-fit solution using upgraded materials for improved durability over standard OE rubber.

• Direct-fit replacement for OE 5462446K
• Includes polyurethane body mounts and collared sleeves
• Polyurethane construction offers superior resistance to oils, road grime, and ozone compared to rubber
• Restores factory body height and alignment
• Manufacturer Part Number: 12201.02
• Note: Kit does not include mounting hardware
• Warranty: Limited 5-year manufacturer warranty

Fits 1941-1975 Jeep CJ5, CJ6, and Willys MB, MA, CJ-2, CJ-3, and Jeepster models.

Restore the structural integrity and ride quality of your classic Jeep or Willys with the Omix Body Tub Mounting Kit. Over time, original body mounts deteriorate, leading to tub misalignment, door fitment issues, and increased road vibration. This kit provides a comprehensive solution, replacing worn rubber with durable composite bushings designed to meet or exceed OE specifications for fit and density.

This direct-fit kit is engineered to simplify the restoration process, ensuring your body tub is properly isolated from the frame for a quieter, more stable ride. It includes all essential hardware components required to refresh the mounting points on your vintage chassis, from the bushings themselves to the specific washers and shims needed for a professional installation.

• Direct replacement for OE part number 10599050
• Manufactured from durable rubber composite for superior vibration damping and longevity
• Complete kit includes body mount bushings, square washers, round washers, bolts, lock washers, shims, and nuts
• Includes detailed installation instructions
• Manufacturer Part Number: 12201.01
• Supported by a limited 5-year manufacturer warranty

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT.

Restore the clean, factory look of your front bumper with this Omix front bumper right end cap applique. This component acts as a passenger-side fog light surround and is designed as a direct replacement for a cracked, faded, or missing factory trim piece. It ensures a precise fit and finish that matches original equipment specifications for a seamless repair.

Built from high-quality molded plastic, this applique is engineered for durability and reliable performance in both on-road and off-road environments. It installs directly into the factory mounting points without modification, making it a straightforward replacement for worn components. For the matching driver-side (left) applique, see Omix part number 12040.43.

• Position: Right (Passenger Side)
• Material: Durable Molded Plastic
• Style: OE Replacement
• Installation: Direct Fit
• Manufacturer Part Number: 12040.44
• Replaces OE Part Number: 6BU58TZZAA
• Warranty: Limited 5-Year Warranty

Fits select 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Rubicon, Sahara, Sport, X, 70th/75th Anniversary).

This Omix front bumper applique is a direct replacement trim piece designed to restore the factory appearance of your JK's front end. Manufactured from impact-resistant materials to withstand road debris and harsh weather, this applique features a silver finish that matches the original styling. It serves as a precise replacement for worn, cracked, or missing factory trim, ensuring your bumper maintains its clean, professional look.

• Manufacturer Part Number: 12040.08
• Direct replacement for OE part: 1ML27WS2AA
• Finish: Silver
• Construction: Impact-resistant plastic
• Installation: Requires drilling for proper fitment
• Application: Custom fit for JK/JKU chassis
• Warranty: Limited 5-year manufacturer warranty

Fits 1994-2001 Jeep Cherokee XJ (Classic, Country, Limited, SE, Sport) models built after February 7, 1994.

This Omix one-piece windshield molding is designed to provide a weather-tight seal and a clean, finished look for your XJ. Over time, factory moldings can become brittle, crack, or shrink, leading to wind noise and potential water leaks. This direct-fit replacement restores the factory appearance and sealing performance using OE-style materials and dimensions.

• One-piece construction for a seamless fit and improved durability
• Manufactured to meet or exceed OE specifications for fitment and finish
• Replaces OE part number 55235391
• Finished in black to match original trim components
• Manufacturer Part Number: 12035.58
• Limited 5-Year Warranty

Fits 1984-2001 Jeep Cherokee XJ models including Base, Sport, Limited, and SE trims.

Restore interior utility to your XJ with this Omix dual cup holder. Designed to solve the lack of factory beverage storage, this unit provides a secure spot for two drinks without interfering with vehicle operation. It is manufactured from impact-resistant molded black plastic to withstand daily use and off-road vibrations.

The holder mounts to the front side of the center console compartment, positioning itself directly over the emergency brake release handle for easy access. Installation is simple and secure, using two screws to anchor the unit to the factory console trim.

• Direct-fit OE style replacement part
• Durable black impact-resistant plastic construction
• Dual-cup capacity for driver and passenger convenience
• Mounts over the factory emergency brake release handle
• Includes two mounting screws for easy installation
• Manufacturer Part Number: 12035.50
• Limited 5-Year Warranty

Fits 1984-1996 Jeep Cherokee XJ models including Base, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, and Sport.

This Omix replacement rear bumper is engineered to restore the factory appearance and structural integrity of your Jeep Cherokee. Designed as a direct-fit OE replacement, it bolts to the factory mounting points without the need for custom fabrication or drilling. The bumper features a high-luster chrome finish that provides both corrosion resistance and an authentic original-equipment look.

Built to precise tolerances, this 59.75-inch bumper replaces worn, rusted, or damaged factory units to keep your vehicle looking and performing as intended. It serves as a reliable solution for enthusiasts maintaining the classic aesthetic of the XJ platform while ensuring proper fitment and alignment with the rear body panels.

• Direct-fit OE style replacement
• Finish: Chrome
• Bumper Length: 59.75 inches
• Replaces OE Part Number: 55234619
• Manufacturer Part Number: 12035.43
• Limited 5-Year Warranty

Fits select 1998-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models.

This Omix OE-style replacement front bumper kit is engineered to restore the factory appearance and protection of your Jeep. As a direct-fit solution, it replaces worn, rusted, or damaged factory bumpers with components that maintain the original styling and structural integrity of the Wrangler TJ and LJ platforms. The center section is constructed from durable steel to handle daily driving and trail use.

• Direct Fit: Bolts directly to the factory mounting points for a straightforward installation.
• Complete Kit: Includes the steel bumper center section and both driver (LH) and passenger (RH) side bumper extensions.
• OE Restoration: Replicates original equipment dimensions and finish for a seamless look.
• Manufacturer Part Number: 12033.07
• Warranty: Includes a limited 5-year manufacturer warranty.

Fits select 1994-2001 Jeep Cherokee and 1997-2001 Jeep Wrangler models.

Restore the security of your engine bay with this Omix hood prop rod clip. Over time, factory plastic clips become brittle due to heat cycles and vibration, often snapping and leaving the hood prop rod loose to rattle against the inner fender or radiator support. This direct-fit replacement restores the factory-spec retention, ensuring your prop rod stays firmly seated when the hood is closed.

• Manufactured to OE dimensions for a secure snap-fit installation
• Replaces broken or missing hood prop rod retainers
• Durable composite construction resists engine bay heat and chemicals
• Manufacturer Part Number: 12032.02

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Maintain the factory look and structural integrity of your interior with the Omix Dash Pad Screw Kit. These OE-style fasteners are engineered specifically to replace worn, rusted, or missing hardware on classic Jeep CJ series vehicles. This kit includes eight screws, providing exactly what is needed to install or secure a single dash pad to the factory mounting points without modification.

• Direct Fit: Designed to factory specifications for a seamless replacement of original hardware.
• Complete Kit: Includes 8 screws, enough to fully secure one dash pad.
• OE Style: Matches the appearance and thread pitch of factory Jeep components to maintain an original look.
• Specifications: Replaces OE 974764-K8; for individual screw needs, use Omix 12029.31.
• Reliability: Backed by a limited 5-year warranty.

• Manufacturer Part Number: 12029.32
• Quantity: Set of 8
• Finish: OE Replacement

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

The rear crossmember is a critical structural component of the Jeep CJ frame, often prone to corrosion and trail damage. This Omix replacement rear frame crossmember and bumper is engineered to restore the rigidity of your chassis while providing a solid mounting point for rear accessories. Stamped from heavy-duty 10-gauge steel, it measures 50 inches in length and is designed to be welded into place, replacing worn or rusted factory units to keep your vintage Jeep on the road.

• Construction: Heavy-duty 10-gauge steel
• Installation: Weld-in required for secure chassis attachment
• Overall Length: 50 Inches
• OE Reference: Replaces factory part 8127711
• Compatibility: Designed for use with bumperettes (Omix 11215.01)
• Manufacturer Part Number: 12029.04
• Warranty: Limited 5-Year

Fits 1976-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler.

Restore the safety and functionality of your vehicle with this Omix OE-style replacement tailgate cable. Over decades of use, factory cables often fray or snap due to corrosion and heavy loads. This heavy-duty 19.5-inch cable provides a precise fit to keep your tailgate level and supported when open, protecting both your cargo and the tailgate hinges from excessive stress.

• Direct replacement for OE part number 5752617
• Length: 19.5 inches overall
• Attachment: Features integrated eyelets on both ends for a secure fit
• Fitment: Specifically designed for Jeep CJ7 and CJ8 (Scrambler) models
• Quantity: Sold individually; two cables are required per vehicle
• Manufacturer Part Number: 12029.02
• Warranty: Limited 5-year warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

Maintain proper hood alignment and prevent metal-on-metal vibration with this Omix hood to grille bumper. Designed as a direct OE-style replacement, this round rubber bumper cushions the contact point between the hood and grille shell to protect your finish and reduce front-end noise. It is built to original dimensions for a precise fit on classic CJ platforms.

• Direct replacement for OE part number 5455348
• Constructed from high-density rubber for durability and weather resistance
• Round profile with an outside diameter (OD) of 0.88 inches
• Sold individually; replaces worn or missing factory isolators
• Manufacturer Part Number: 12029.01
• Limited 5-year warranty

Fits 1972-2002 Jeep CJ5, CJ6, CJ7, Scrambler, and Wrangler (YJ/TJ).

Restore clear rearward visibility to your Jeep’s cabin with this Omix interior rearview mirror. Engineered to meet original equipment standards, this direct-fit replacement is designed for Jeep restoration and maintenance, providing the factory-correct look and function required for vintage CJ and early Wrangler models. The mirror features a durable black housing and matches the dimensions of the original factory unit.

This component installs as a direct replacement for OE part number 8993023. For installations requiring a new windshield mounting tab, this mirror is compatible with the Omix mounting kit (sold separately under part number 11021.02).

• Direct replacement for factory OE 8993023
• Classic black finish matches original interior trim
• Designed for interior windshield mounting
• Easy direct-fit installation
• Manufacturer Part Number: 12020.03
• Limited 5-year warranty

Fits 1997-2018 Jeep Wrangler TJ, JK, and JKU models, including Sport, Sahara, Rubicon, SE, and Unlimited trims.

This Omix OE-style replacement liftgate glass ball stud is designed specifically for the driver (left) side. It mounts directly through the liftgate glass to provide a secure anchor point for the liftgate strut. Over time, original ball studs can corrode or strip, leading to poor strut alignment or glass damage; this direct-fit component restores the structural integrity of your liftgate's support system using factory-spec dimensions and materials.

• Direct OE replacement for a precise fit
• Engineered for durability and long service life
• Mounting position: Left (Driver Side)
• Replaces OE Part Number: 4883497AA
• Manufacturer Part Number: 12012.31
• Limited 5-year manufacturer warranty

Note: For the corresponding right-side ball stud, use Omix part number 12012.30.

Fits 1954-1957 Jeep Willys CJ-3.

This Omix replacement seat frame restores the structural integrity and safety of your vehicle's interior. Specifically engineered for the front driver side, this frame is a direct-fit replacement for aged, rusted, or bent factory units. Built to meet OE specifications, it ensures the seat remains properly positioned and secured to the floor pan during operation.

• Position: Left Front (Driver Side)
• Construction: Heavy-duty steel for lasting durability
• OE Reference: Replaces factory part number A-2286-38A1
• MPN: 12011.16
• Note: For the matching front passenger side seat frame, use part number 12011.17.

Fits 1946-1949 Jeep Willys CJ-2.

Maintain the authenticity and structural integrity of your vintage Willys with this Omix front driver side seat frame. Designed as a direct OE-style replacement, this frame is engineered to match factory specifications for a seamless installation. It replaces worn, rusted, or damaged seat bases, providing a solid foundation for your interior restoration project.

Constructed from stamped and welded tubular steel, this seat frame offers the durability required for classic off-road vehicles while preserving the original aesthetic of the CJ-2 series. For a complete interior refresh, the matching passenger side seat frame is available under Omix part number 12011.10.

• Direct fit for front driver side location
• Precision stamped and welded tubular steel construction
• Replaces OE part number: A-2286-2A
• Manufacturer Part Number: 12011.09
• Limited 5-year manufacturer warranty

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore the structural integrity and weather sealing of your Jeep with the Omix Windshield Frame Kit. This OE-style replacement is engineered to replace rusted or damaged factory frames with a direct-fit steel assembly. Designed to meet original equipment dimensions, this kit provides a comprehensive solution for refreshing the front of your CJ's cabin while ensuring a proper seal against the elements.

• Durable Construction: Stamped steel windshield frame finished for corrosion resistance and precise fitment.
• Comprehensive Kit: Includes the windshield glass seal, frame-to-cowl weatherstrip, and hardtop header seal to eliminate leaks and wind noise.
• Complete Hardware: Features the upper windshield channel and necessary hinge hardware for a straightforward installation.
• OE Specifications: Designed as a direct-fit replacement for manufacturer part number 12006.12.
• Warranty: Limited 5-year manufacturer warranty.

Kit Includes: Steel windshield frame, upper windshield channel, windshield glass seal, frame-to-cowl weatherstrip, hardtop header seal, and windshield hinge hardware.

Fits 1967-1975 Jeep CJ5 and 1967-1971 CJ6 models.

Restore the structural integrity and classic profile of your Jeep with this Omix OE-style replacement windshield frame. Engineered as a direct-fit solution, this frame is stamped from durable steel to match factory dimensions and tolerances. It is specifically designed for CJ models equipped with bottom-mounted wiper motors, ensuring a correct installation for mid-to-late CJ5 and CJ6 vehicles.

• Material: Heavy-duty stamped steel construction
• Design: OE-style direct fit for bottom-mounted wipers
• OE Cross-Reference: Replaces factory part number 987996
• Installation: Recommends windshield glass weatherstrip 12301.03 and cowl weatherstrip 12302.02
• Manufacturer Part Number: 12006.07
• Warranty: Limited 5-year manufacturer warranty

Fits 1955-1968 Jeep Willys CJ-5 and CJ-6 models equipped with top-mounted wipers.

Restore the structural integrity of your vintage Jeep with this Omix steel windshield frame. This direct-fit replacement is engineered to original equipment specifications for owners of 1955-1968 CJ models. Fabricated from durable stamped steel, it provides a solid mounting point for your windshield glass and top assembly, effectively replacing rusted or damaged factory frames.

• Direct replacement for OE part number 973727
• Specifically designed for models with top-mounted wiper motors
• Dimensions: 58.75 inches wide (top), 59 inches wide (bottom), and 21 inches tall
• Compatible with glass weatherstrip 12301.03 and cowl weatherstrip 12302.02
• Manufacturer Part Number: 12006.06
• Limited 5-year warranty

Fits select 1976-1986 Jeep CJ7 and Scrambler (CJ8) models. This Omix Tailgate and Seal Kit provides a complete solution for restoring the rear of your classic Jeep, replacing damaged or rusted factory panels with OE-style stamped steel.

Constructed for a direct fit, the tailgate arrives in a primered finish, ready for prep and paint to match your vehicle's exterior. The kit includes a fresh tailgate seal to eliminate rattles and prevent moisture from entering the cargo area. Designed as a straightforward replacement for OE part number 5454025K, this assembly utilizes factory mounting points for a hassle-free installation.

• Replacement steel tailgate with OE-style stamping
• Includes high-quality tailgate weatherstrip seal
• Primered finish for corrosion resistance and paint readiness
• Direct fit replacement for OE 5454025K
• Compatible with factory hinges and hardware
• Note: Requires tailgate cables (12029.02) and latch brackets (12029.27) for a complete overhaul
• Manufacturer Part Number: 12005.08
• Limited 5-Year Warranty

Fits 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models. This Omix replacement front fender is engineered as an OE-style direct fit for the passenger (right) side of your vintage Jeep. Stamped from durable steel and finished in a protective primer, it provides a clean foundation for bodywork and paint restoration.

Designed to help maintain the original silhouette of the Jeep CJ series, this panel replaces worn or damaged factory steel while maintaining correct mounting points. For a complete restoration, this unit is commonly paired with the driver-side fender (12004.11) and the side marker light assembly (12401.02).

• Position: Passenger Side (Right)
• Material: Steel
• Finish: Primered
• Replaces OE Number: 5758964
• Manufacturer Part Number: 12004.12
• Warranty: Limited 5-Year Warranty

Fits select 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models.

This Omix OE-style replacement front fender is engineered to restore the original appearance and structural integrity of your Jeep's bodywork. Constructed from heavy-duty steel and finished in a protective primer, this fender is a direct-fit replacement for the factory driver-side panel. It is designed to match original equipment dimensions and mounting points for a straightforward installation, making it an essential component for restoration or repair of classic Jeep CJ series vehicles.

• Position: Left (Driver Side)
• Material: High-quality steel
• Finish: Primered, ready for paint prep
• Manufacturer Part Number: 12004.11
• Replaces OE Number: 5758965
• Compatible Side Marker Light Assembly: 12401.02
• Matching Right Front Fender: 12004.12
• Warranty: Limited 5-Year