Fits 2004-2006 Pontiac GTO Base models.

The Pedders Urethane Rear Crossmember Outer Bushing Kit is engineered to address one of the primary suspension weaknesses in the V-platform chassis: excessive rear subframe movement. The factory rubber bushings are designed for maximum isolation but often allow the rear cradle to shift under load, leading to unpredictable handling, wheel hop, and "rear-end squirm" during aggressive driving or hard acceleration.

By replacing the OE components with Pedders' low-compliance polyurethane, you significantly reduce cradle movement while maintaining a level of civility suitable for a daily-driven performance car. These bushings provide a more direct connection between the chassis and the rear suspension, ensuring the rear wheels stay properly aligned under load. Each kit features hardened crush tubes to maintain precise tolerances and withstand the rigors of high-performance use.

• Replaces soft factory rear crossmember (subframe) outer bushings
• Constructed from high-grade, low-compliance polyurethane
• Includes hardened steel crush tubes for maximum durability
• Reduces axle hop and improves cornering stability
• Designed specifically for the 2004-2006 GTO chassis
• Manufacturer Part Number: PED-EP1145

Fits 2004-2006 Pontiac GTO Base models.

The Pedders Sports Ryder front strut (PED-9985R) is an engineered suspension solution designed to replace worn original equipment with a component that balances daily-driver civility with performance handling. Developed through rigorous testing on both Australian and American roads, these struts are tuned to correct common OE suspension weaknesses, delivering what Pedders calls a "factory hot rod" feel—quiet, comfortable, and significantly more responsive.

Each Sports Ryder strut is nitrogen gas pressurized to ensure consistent damping and prevent oil foaming under hard use. The heavy-duty construction and precisely tuned valving provide the stability needed for spirited driving without the harshness often associated with race-spec components. This specific model features an OE-style tab for seamless integration with factory mounting points and hardware.

• Manufacturer Part Number: PED-9985R
• Series: Sports Ryder
• Position: Front
• Gas Type: Nitrogen gas pressurized
• Valving: Precisely tuned for performance handling and ride quality
• Mounting: Includes OE-style tab for direct-fit installation
• Construction: Heavy-duty internals and casing for long-term durability

Fits 2004-2006 Pontiac GTO Base.

The Pedders SportsRyder Front Strut (PED-9985L) is a nitrogen gas-pressurized suspension upgrade designed to replace factory front dampers. Engineered specifically for the 2004-2006 Pontiac GTO chassis, this strut provides a precision-tuned balance between daily-driver civility and performance handling. By identifying and correcting OE suspension weaknesses, Pedders delivers a "factory hot rod" feel that remains quiet and comfortable on the street while maintaining high-performance control on the track.

Note: This component is not compatible with models equipped with ball/ball style sway bar links.

• Nitrogen Gas Pressurized: Effectively prevents oil cavitation and reduces damping fade during spirited driving or heavy use.
• Precisely Tuned Valving: Specifically calibrated for the GTO to improve steering response, cornering stability, and body control.
• Heavy Duty Construction: Manufactured to higher tolerances than standard replacement struts for increased durability under performance loads.
• Direct Fit: Designed to install directly into factory mounting points for a straightforward replacement process.

Includes: (1) Pedders SportsRyder Front Strut (MPN: PED-9985L).

Fits 2008-2013 Pontiac G8 and Chevrolet Caprice PPV.

Pedders SportsRyder struts are engineered to provide the ideal balance between daily-driver civility and performance handling. Developed specifically for the GM Zeta platform, these struts identify and correct the inherent weaknesses in the original equipment suspension. By thinking like OE engineers but focusing strictly on the enthusiast experience, Pedders delivers a suspension component that feels like a factory hot rod—quiet, comfortable, and highly capable on the road or track.

Each SportsRyder strut features nitrogen gas pressurization and precisely tuned valving to maintain consistent damping under varying loads. The heavy-duty construction ensures longevity and reliability for high-performance driving applications.

• Nitrogen gas pressurized for consistent performance and reduced aeration
• Precisely tuned valving to balance ride comfort and high-speed handling
• Heavy-duty construction designed to meet or exceed OE specifications
• Engineered as a direct-fit replacement for the factory front strut
• Manufacturer Part Number: PED-9464R

Vehicle Fitment:

Fits 2008-2013 Pontiac G8 (Base, GT, GXP) and Chevrolet Caprice PPV.

Pedders SportsRyder struts are engineered to deliver a "factory hot rod" feel, providing the ideal balance between daily-driver civility and performance handling. Designed to correct the inherent weaknesses in original equipment suspension, these struts replace worn factory units with heavy-duty construction and precision-tuned valving. The result is a vehicle that remains quiet and comfortable while significantly improving chassis control during spirited driving.

• Nitrogen gas pressurized for consistent damping performance and reduced aeration
• Precisely tuned valving specifically developed for the G8 and Caprice chassis
• Heavy-duty construction for increased longevity under high-load conditions
• Direct bolt-on replacement for factory front struts
• MPN: PED-9464L

Developed through rigorous R&D in both Australia and the USA, Pedders SportsRyder components are built for the enthusiast driver who demands a suspension system that performs as well on the road course as it does on the commute.

Fits 2004-2006 Pontiac GTO Base models.

The Pedders Sports Ryder Front Strut is an engineered suspension solution designed to enhance the handling characteristics of the 2004-2006 Pontiac GTO chassis. Developed to bridge the gap between daily-driver civility and performance handling, this strut replaces the factory unit to provide a more controlled, "factory hot rod" feel without compromising ride quality. It is specifically designed with a vertical link tab for proper fitment and integration with the GTO's front suspension geometry.

• Nitrogen gas pressurized for consistent damping performance and reduced oil aeration
• Precisely tuned valving to optimize the balance between comfort and body control
• Heavy-duty construction to withstand the demands of enthusiast driving
• Integrated vertical link tab for direct compatibility
• Manufacturer Part Number: PED-9433R

Fits 2004-2006 Pontiac GTO Base models equipped with Ball/Ball style sway bar links.

The Pedders SportsRyder Front Strut (PED-9433L) is engineered to address original equipment suspension weaknesses, providing a precise balance between street civility and performance handling. As a premium nitrogen gas pressurized unit, it features specifically tuned valving designed to deliver a "factory hot rod" feel—maintaining daily driver comfort while offering the control required for spirited driving and enthusiast use.

Built with heavy-duty construction, this strut is a direct replacement for worn OE components, restoring damping consistency and improving steering response. This model is specifically configured for GTO chassis utilizing the ball-to-ball sway bar link setup.

• Manufacturer Part Number: PED-9433L
• Product Line: SportsRyder
• Gas Type: Nitrogen Gas Pressurized
• Valving: Precisely tuned for enthusiast performance
• Construction: Heavy-duty housing and internal components
• Compatibility: Front fitment for models with Ball/Ball sway bar links

Fits select 2008-2013 Pontiac G8 (Base, GT, GXP) and Chevrolet Caprice PPV.

The Pedders SportsRyder Rear Shock (MPN: PED-9295) is a heavy-duty performance damper designed to replace worn-out factory components and restore precise handling characteristics. Unlike generic replacement shocks, the SportsRyder series is engineered to provide an ideal balance between daily-driver civility and high-performance control, often referred to as the "factory hot rod" feel.

Constructed with nitrogen gas pressurization, this shock effectively minimizes oil foaming and aeration, ensuring consistent damping performance even under increased loads or spirited driving. The valving is precisely tuned to provide firm chassis control without sacrificing the ride quality expected in a performance sedan.

• Nitrogen gas pressurized for consistent damping and heat management
• Precisely tuned internal valving for enhanced handling and stability
• Heavy-duty construction designed to outperform and outlast OE units
• Direct fitment for factory mounting points
• Manufacturer Part Number: PED-9295

Fits 2004-2006 Pontiac GTO Base.

The Pedders SportsRyder Big Bore Rear Shock is a performance-tuned upgrade designed to replace the worn factory dampeners on the 2004-2006 Pontiac GTO. Engineered by specialists who identify and correct OE suspension weaknesses, this heavy-duty shock delivers the ideal balance between performance handling and daily-driver civility. The big bore construction increases fluid capacity, providing superior heat dissipation and more consistent damping control under load.

This shock is nitrogen gas pressurized to eliminate oil aeration and prevent shock fade during spirited driving. With precisely tuned valving, the SportsRyder shock maintains firm chassis control without the excessive harshness of a dedicated race component. It installs directly into factory mounting points, making it an essential upgrade for GTO owners looking to restore and enhance their vehicle's ride quality and road-holding capabilities.

• Manufacturer Part Number: PED-9195
• Series: SportsRyder Big Bore
• Installation: Rear position; bolts to factory mounting points
• Charging: Nitrogen gas pressurized for consistent performance
• Valving: Precisely tuned for enthusiast-level handling and comfort
• Construction: Heavy-duty big bore design for increased durability

Fits 2004-2006 Pontiac GTO Base.

The Pedders SportsRyder Rear Shock is engineered to replace the soft, often worn factory dampers on the 2004-2006 Pontiac GTO. Designed to correct the common OE suspension weaknesses of the V-Platform chassis, this shock absorber delivers the "Pedders feel"—a precise balance between street civility and performance handling. Whether you are daily driving or hitting backroads, these shocks eliminate excessive body roll and float without the harshness of a dedicated track damper.

Built to heavy-duty standards, the SportsRyder series features nitrogen gas pressurization and precisely tuned valving to ensure consistent damping under load. This reduces aeration and fade, providing reliable traction and stability for your GTO.

• Nitrogen gas pressurized for consistent performance and reduced fluid aeration
• Precisely tuned valving optimized for enthusiast driving
• Heavy-duty construction for increased durability over factory units
• Direct fit replacement for the original equipment rear shocks
• Manufacturer Part Number: PED-9095

Fits select 2013-2025 Subaru BRZ, Toyota 86, Toyota GR86, and Scion FR-S models.

The Pedders EziFit SportsRyder strut assembly is a precision-engineered suspension solution designed for the driving enthusiast. By combining a nitrogen gas-pressurized twin-tube shock with a matched SportsRyder lowering spring, this kit eliminates the guesswork of suspension tuning. This unit comes fully assembled, allowing for a straightforward bolt-on installation that replaces the worn OE components without the need for a spring compressor.

Designed to provide an ideal balance between daily-driver civility and performance handling, this assembly lowers the vehicle by approximately 25mm for a more aggressive stance and a lower center of gravity. To ensure proper alignment geometry after lowering, Pedders includes a factory-style upper camber bolt and the PED-580096 adjustment kit for expanded camber and caster control.

• Part Number: PED-909148R
• Position: Front Right
• Shock Type: 25mm Twin Tube Nitrogen Gas Charged
• Lowering: 25mm (approximate)
• Fully assembled with top mount, spring, and shock
• Includes PED-580096 for additional camber/caster adjustment
• Factory-style upper camber bolt included for precise alignment

Fits 2005-2014 Ford Mustang models, including Base, GT, Boss 302, Bullitt, and Shelby GT500/GT500KR.

The Pedders EziFit SportsRyder Spring and Shock Kit is a comprehensive suspension solution designed to eliminate the guesswork of component matching. This kit replaces worn factory struts and springs with performance-tuned SportsRyder gas-charged dampers and lowered coil springs. Developed to provide an ideal balance between daily-driver civility and aggressive handling, this kit lowers the vehicle approximately 25mm for a more athletic stance and reduced center of gravity.

Built for the enthusiast, these units come fully assembled with heavy-duty GT500-style strut mounts. This pre-assembled design significantly reduces installation time and eliminates the danger of using a spring compressor. Each component is engineered to correct OE suspension weaknesses, ensuring a quiet, comfortable ride with dramatically improved cornering response.

• Manufacturer Part Number: PED-909031
• Lowering Height: 25mm drop from factory height
• Installation: Fully assembled for direct bolt-on replacement
• Strut Mounts: Includes heavy-duty GT500 style mounts for increased durability
• Tuning: Performance-matched SportsRyder struts and springs
• Includes: Pair of front strut/spring assemblies and pair of rear shocks/springs (where applicable)

Fits 2005-2014 Ford Mustang models including Base, GT, Boss 302, Bullitt, and Shelby GT500.

The Pedders EziFit SportsRyder Rear Spring and Shock Kit (PED-902222) is an engineered suspension solution designed to correct the inherent weaknesses in the factory OE setup. By replacing worn components with performance-matched shocks and springs, this kit delivers the ideal balance between daily-driver civility and performance handling, often described as a "factory hot rod" feel.

This kit is specifically developed for the enthusiast driver, offering a direct-fit replacement that improves cornering stability and reduces body roll. The included SportsRyder springs provide a consistent 25mm drop in the rear, lowering the center of gravity while maintaining a comfortable, quiet ride without the harshness associated with dedicated race setups.

• Performance-matched shocks and springs for optimized damping control
• Lowers the rear ride height by 25mm for improved stance and handling
• Identifies and corrects weaknesses in the original factory suspension
• Direct-fit components ensure a straightforward installation
• Designed for the enthusiast driver seeking performance and comfort
• Manufacturer Part Number: PED-902222

Fits 2003-2008 Subaru Forester models, including X, XS, XT, and Sports trims.

The Pedders EziFit Right Rear Nivomat Conversion is a specialized solution for owners of SG-chassis Foresters equipped with failing or sagging factory Self-Leveling Suspension (SLS). This complete assembly allows you to perform a full SLS delete, replacing the complex, expensive Nivomat dampers with a conventional, high-performance strut and coil spring configuration.

As an EziFit assembly, this part comes fully pre-assembled and ready for installation, eliminating the need for a spring compressor or the reuse of worn factory top mounts. It is engineered to restore the vehicle's correct ride height and provide a stable, controlled ride that balances daily comfort with improved cornering response.

• Direct OE Replacement: Designed as a bolt-on kit to replace the right rear factory Nivomat unit.
• Complete Assembly: Includes a nitrogen-charged gas strut, heavy-duty coil spring, bump stop, dust boot, and new top mount.
• Durability: Engineered to eliminate the common leak and failure points found in OE hydraulic self-leveling systems.
• Precision Valving: Specifically tuned for the SG Forester chassis to maintain civil ride quality while enhancing handling.
• Manufacturer Part Number: PED-818473R

Fits 2003-2008 Subaru Forester models including X, XS, XT, Sports, and L.L. Bean Edition.

The Pedders EziFit Right Front Strut Assembly (PED-818472R) provides a precision-engineered suspension solution for the SG-chassis Subaru Forester. Designed as a complete, bolt-on replacement for the factory unit, this assembly eliminates the need for a spring compressor, making installation safer and significantly faster for both DIYers and professional technicians.

Each EziFit unit comes fully assembled with a high-quality gas-charged strut, a specifically tuned coil spring, and a new top mount. Pedders engineers focus on correcting original equipment weaknesses to deliver a balanced ride that maintains daily-driver civility while improving handling response. This assembly restores factory ride height and damping characteristics, ensuring your Forester remains quiet and comfortable.

• Direct Fit: Replaces factory components and bolts to existing mounting points.
• Fully Assembled: Includes strut, coil spring, and top mount for a complete right-front corner refresh.
• Optimized Valving: Gas-charged nitrogen damping for consistent performance and reduced aeration.
• Easy Installation: Pre-assembled design reduces labor time and eliminates the danger of handling compressed springs.
• Manufacturer Part Number: PED-818472R

Fits select 2015-2022 Ford Mustang models, including EcoBoost, GT, Mach 1, Bullitt, and Shelby GT350/GT500.

The Pedders Front and Rear Sway Bar Kit (PED-814098) is specifically engineered to correct the handling weaknesses found in the factory S550 suspension. By increasing the roll stiffness of the chassis, this kit significantly reduces body lean during cornering and high-speed transitions. The result is a more predictable tire contact patch and improved steering response without the harshness often associated with dedicated track setups.

Designed as an integrated suspension solution, these bars provide the ideal balance between daily-driver civility and performance handling. Each kit is developed to think like an OE engineer, prioritizing a "factory hot rod" feel that is quiet, comfortable, and highly capable on both the street and the race course.

• Complete front and rear sway bar upgrade kit
• Reduces body roll and improves cornering stability
• Direct replacement for OE components
• Retains daily-driver ride quality while increasing performance
• Manufacturer Part Number: PED-814098

Fits 2004-2006 Pontiac GTO Base.

Upgrade your vehicle's chassis dynamics with the Pedders Front and Rear Sway Bar Kit. Designed to address the inherent body roll and handling limitations found in the factory suspension, this matched set provides a precise "factory hot rod" feel. By replacing the OE bars with these engineered components, you achieve significantly flatter cornering and improved lateral stability without compromising the civility required for a daily driver.

Pedders suspension solutions are developed by identifying weaknesses in original equipment and engineering integrated corrections. This kit is tuned specifically for the GTO chassis to provide an ideal balance between performance handling and ride comfort. Whether on the street or a road course, these bars ensure your vehicle remains composed and responsive during aggressive maneuvers.

• Precision engineered for the 2004-2006 Pontiac GTO
• Complete kit includes both front and rear sway bars
• Reduces body roll for improved cornering performance
• Maintains factory-level ride quality and comfort
• Direct-fit replacement for original equipment components
• Manufacturer Part Number: PED-814097

Fits 2009-2013 Subaru Forester X and XT models (SH chassis).

Pedders SportsRyder lowering springs are engineered to provide a performance-oriented stance while maintaining the ride quality necessary for a daily driver. By lowering the center of gravity, these springs reduce body roll and improve handling response through corners. Unlike generic lowering kits, Pedders SportsRyder components are designed specifically for the SH Forester chassis to correct original equipment weaknesses and deliver a balanced feel between civility and performance.

Each spring is manufactured to strict tolerances to ensure consistent performance and durability. These springs are built for the enthusiast who wants a "factory hot rod" feel—quiet, comfortable, and responsive during spirited driving.

• Manufacturer Part Number: PED-804015
• Product Line: SportsRyder
• Chassis Type: SH
• Reduces body roll and improves cornering stability
• Maintains daily-driver comfort levels
• Engineered as a direct-fit solution for the SH-chassis Forester

Vehicle Fitment

Fits 2003-2008 Subaru Forester SG models including X, XS, XT, and Sports trims.

Pedders SportsRyder Lowering Springs are engineered to provide the ideal balance between performance handling and daily civility. Unlike generic lowering kits, Pedders components are developed by identifying weaknesses in the factory suspension and creating solutions that offer a precise, "factory hot rod" feel—quiet, comfortable, and responsive.

Built for the automotive enthusiast, these springs lower the vehicle's center of gravity to reduce body roll and improve cornering stability. Pedders engineers focus on achieving a specific "Pedders feel," ensuring that your Forester handles the race course with ease while remaining a comfortable daily driver.

• Manufacturer Part Number: PED-804014
• Product Line: SportsRyder
• Chassis Fitment: SG Series
• Optimized for improved handling and stance
• Engineered to meet or exceed OE performance levels

Fits 2004-2006 Pontiac GTO Base.

Pedders SportsRyder FE2 height springs are engineered to provide a premium suspension solution for the 2004-2006 Pontiac GTO, addressing the common weaknesses found in original equipment components. Designed to maintain the factory FE2 ride height while significantly enhancing handling characteristics, these springs offer the ideal balance between daily-driver civility and performance response. Pedders utilizes high-grade materials and rigorous testing to ensure each spring provides a quiet, comfortable ride without sacrificing the direct steering feel and cornering stability enthusiasts demand.

• Direct replacement for factory coil springs to maintain FE2 ride height
• Engineered to improve handling response and reduce body roll
• Manufactured to strict tolerances for consistent performance and longevity
• Provides a "factory hot rod" feel with a balance of comfort and control
• Manufacturer Part Number: PED-804010

Fits 2004-2006 Pontiac GTO Base (V6).

Pedders SportsRyder Low Springs are engineered to provide the ideal balance between performance handling and street civility. Specifically developed for the 2004-2006 Pontiac GTO chassis, these springs address the inherent weaknesses of the factory suspension to deliver a "factory hot rod" feel—offering a lower center of gravity and improved steering response without the harshness often associated with race-only components.

As part of the renowned SportsRyder range, these springs are the result of rigorous R&D, designed to perform exceptionally well on both the street and the occasional track day. Each spring is manufactured to strict tolerances to ensure consistent ride height and predictable handling characteristics, replacing worn OE components with a performance-oriented solution.

• Manufacturer Part Number: PED-804009
• Series: SportsRyder
• Part Type: Lowering Springs
• Fitment: Replaces factory springs on 2004-2006 Pontiac GTO
• Performance: Enhanced handling with maintained ride quality

Fits select 1997-2013 Chevrolet Corvette models including Base, Grand Sport, Z06, ZR1, and 427. This Pedders SportsRyder Sway Bar Kit is an integrated suspension solution designed to reduce body roll and improve handling balance by correcting the weaknesses found in original equipment components. The kit provides the ideal balance between daily-driver civility and performance handling, ensuring your Corvette feels planted and responsive.

• 35mm tubular front sway bar for increased front-end rigidity.
• 25.4mm 3-point adjustable rear sway bar to fine-tune handling characteristics.
• High-grade polyurethane bushings and all necessary installation hardware included.
• Durable Pedders Red powder coat finish for superior corrosion protection.
• Engineered to bolt directly to factory mounting points.
• Manufacturer Part Number: PED-803517

Fits 2005-2014 Ford Mustang (Base, GT, Boss 302, Bullitt, and Shelby GT500).

The Pedders EziFit SportsRyder Spring and Shock Kit provides a complete, pre-assembled suspension solution for the S197 chassis. This kit (PED-803052) eliminates the hassle of using a spring compressor by providing performance-matched struts, shocks, and coil springs fully assembled and ready for installation. Engineered to achieve a refined balance between daily civility and performance handling, this kit replaces worn OE suspension with components specifically valved to improve chassis control and steering response.

• Consistent 25mm lowering front and rear for a lower center of gravity and leveled stance.
• Includes heavy-duty GT500-style front strut mounts for enhanced durability and precision.
• Fully assembled front struts significantly reduce installation time and labor.
• Front Spring Rate: 3.6 kg/mm.
• Rear Spring Rate: 3.3 kg/mm.
• Direct bolt-on replacement to factory mounting points.
• Manufacturer Part Number: PED-803052.

Fits select 2015-2022 Ford Mustang models including EcoBoost, GT, V6, Bullitt, and Mach 1.

The Pedders EziFit SportsRyder Spring and Shock Kit is an engineered suspension solution designed to eliminate the compromises found in factory setups. By replacing worn or soft OE components with performance-matched struts, shocks, and springs, this kit provides the ideal balance between daily-driver civility and aggressive handling. The EziFit design comes fully preassembled, allowing for a straightforward bolt-on installation that avoids the need for a spring compressor or dangerous disassembly of the factory strut.

Every component is tuned to provide a "factory hot rod" feel—comfortable enough for commuting but responsive enough for spirited driving. This kit lowers the vehicle approximately 30mm at both the front and rear, improving the center of gravity and reducing unsightly wheel gap while maintaining ride quality.

• Performance Drop: Lowers vehicle 30mm Front and Rear
• Preassembled: Complete EziFit assemblies for easy, safe installation
• Front Spring Rate: 3.3 kg/mm
• Rear Spring Rate: 14.4 kg/mm
• Construction: Performance-matched struts and shocks valved for the included lowering springs
• MPN: PED-803051

Fits select 2013-2025 Subaru BRZ, Toyota 86, Toyota GR86, and Scion FR-S models.

The Pedders EziFit SportsRyder Spring and Shock Kit (PED-803050) provides a complete, bolt-on suspension solution designed to enhance handling without sacrificing ride quality. This kit features nitrogen gas-pressurized twin-tube struts and matched lowering springs, specifically engineered with offset mounts to optimize geometry on the 86/BRZ chassis. By replacing worn factory components with this pre-assembled unit, you significantly reduce installation time and eliminate the need for a spring compressor during the swap.

Each strut is built with a sintered iron piston and an anti-bleed back upper seal for consistent damping performance under varied driving conditions. The included SportsRyder springs are tuned to lower the vehicle approximately 25mm, providing a lower center of gravity and a more aggressive stance while maintaining the ideal balance between daily-driver civility and performance handling.

• Nitrogen gas pressurized twin-tube strut design
• Sintered iron piston for durability and precise valving
• Anti-bleed back upper seal to maintain internal pressure
• Fully pre-assembled for reduced installation time and improved safety
• Lowers vehicle approximately 25mm (0.98 inches) for improved center of gravity
• Manufacturer Part Number: PED-803050
• Includes a 2-Year / 25,000-mile warranty

Fits 2005-2007 Subaru Impreza WRX STI and WRX STI Limited.

The Pedders EziFit SportsRyder Spring and Shock Kit is a fully integrated suspension solution designed to balance street civility with performance handling. This pre-assembled system replaces worn factory components with matched, valved struts and lowered coil springs, eliminating the guesswork of mixing and matching parts. By addressing the inherent weaknesses of the OE suspension, this kit provides a "factory hot rod" feel that is quiet and comfortable for daily driving while remaining highly capable during spirited use.

Construction features heavy-duty twin-tube gas technology with reinforced, double-welded mountings for maximum durability. To improve suspension geometry, the kit includes offset rubber top mounts that provide increased caster and camber, while the angled top mount bearings are specifically designed to prevent stiction. Each system is individually shock dyno tested to ensure consistent performance across both struts.

• Fits 2005-2007 Subaru Impreza WRX STI (All Trims)
• Complete pre-assembled kit reduces installation time and tool requirements
• Lowers vehicle approximately 20mm front and rear
• Heavy-duty twin-tube gas strut construction with double-welded mounts
• Includes offset top mounts for improved caster/camber adjustment
• Supplied with SportsRyder gas struts, lowered coil springs, bump stops, boot kits, and mounts
• Individually shock dyno tested for quality assurance
• Manufacturer Part Number: PED-803049
• Warranty: 2 Year / 24,000 miles

Fits select 2002-2007 Subaru Impreza models, including WRX, RS, 2.5i, and 2004 WRX STI.

The Pedders EziFit SportsRyder Spring and Shock Kit (PED-803035) offers a complete, bolt-on suspension solution for enthusiasts looking to improve handling and stance. These kits come pre-assembled with struts, springs, and top mounts, eliminating the need for a spring compressor and significantly reducing installation time. Engineered to replace worn factory components, this kit addresses OE weaknesses to provide the ideal balance between civility and performance.

The nitrogen gas pressurized twin-tube struts are built with sintered iron pistons and anti-bleed back upper seals for consistent damping and long-term durability. This kit provides a moderate drop of 30mm in the front and 25mm in the rear, lowering the center of gravity for sharper turn-in and reduced body roll while maintaining a comfortable ride quality suitable for daily driving.

• Nitrogen gas pressurized twin-tube design for consistent damping
• Sintered iron piston and anti-bleed back upper seal for durability
• Pre-assembled for fast, safe installation without specialized tools
• Front Ride Height Drop: 30mm
• Rear Ride Height Drop: 25mm
• Manufacturer Part Number: PED-803035
• Warranty: 2 Year / 25,000 miles

Fits 2008-2009 Pontiac G8 Base, GT, and GXP models.

Pedders Heavy Duty Rear Lift Springs are engineered to correct the inherent weaknesses of the original equipment (OE) suspension on the Pontiac G8 platform. Designed for the enthusiast driver who requires increased ride height or improved load-carrying capability, these springs provide a precise balance between daily-driver civility and performance handling. Unlike standard replacements, Pedders focuses on identifying OE soft points and reinforcing them through superior materials and manufacturing.

• Increased Load Capacity: Heavy-duty rating designed to prevent rear-end sag and maintain stability under load.
• Precise Ride Height: Specifically engineered as a lift spring to restore or enhance the G8's rear stance.
• Cold-Coiled Durability: Manufactured using high-quality materials to ensure long-term resistance to fatigue and settling.
• OEM Integration: Designed to work within the factory suspension geometry while providing a firmer, more controlled feel.
• MPN: PED-7955

Every Pedders component is developed through rigorous testing on developmental chassis. These springs are built to suit the enthusiast who wants their Pontiac G8 to handle with the precision of a factory hot rod while maintaining quiet, comfortable operation on the road.

Fits 2008-2009 Pontiac G8 Base, GT, and GXP models.

Pedders Heavy Duty Rear Coil Springs are specifically engineered to address rear-end sag and improve load-carrying capacity on the Pontiac G8 platform. These springs provide a 30mm raise over the factory ride height, making them an ideal solution for vehicles equipped with heavy trunk loads or for owners seeking increased ground clearance. Unlike generic replacement springs, Pedders components are designed by suspension specialists who identify and correct OE weaknesses, ensuring the PED-7855 maintains its height and spring rate through years of service.

Built to bridge the gap between factory comfort and performance handling, these heavy-duty coils offer a stable, controlled ride without the harshness often found in race-only setups. They install directly into the factory rear spring seats for a straightforward replacement of worn or soft original equipment.

• Manufacturer Part Number: PED-7855
• Position: Rear
• Ride Height Change: 30mm Raise
• Construction: Heavy Duty
• Application: Replaces sagging or worn OE rear springs

Fits 2004-2006 Pontiac GTO Base.

The Pedders PED-7843 X-Drag Rear Coil Spring is engineered to solve common suspension weaknesses in the factory GTO chassis. Specifically designed for enthusiasts who demand better weight transfer and squat control, these springs replace the often-fatigued or overly soft original equipment to provide a more stable and responsive launch. Whether used for street performance or on the drag strip, these springs maintain a balance between civility and high-performance handling.

By identifying the specific deficiencies in the factory coil design, Pedders developed this integrated suspension solution to ensure the vehicle remains composed under heavy load. The X-Drag series focuses on minimizing rear-end dip during hard acceleration, which improves traction and overall vehicle geometry during high-torque applications.

• Direct-fit replacement for factory rear coil springs
• Specially tuned rate for X-Drag performance and squat control
• Corrects OE sagging issues common to the 2004-2006 GTO platform
• Manufactured to precise tolerances for consistent ride height and spring rate
• Manufacturer Part Number: PED-7843