Fits 1987-1995 Jeep Wrangler (YJ) models including Base, Sahara, Sport, and SE equipped with a 1-1/8 inch diameter front sway bar.

Restore steering precision and eliminate front-end body roll by replacing worn-out, compliant factory rubber bushings with these high-performance polyurethane components from Prothane. Standard rubber bushings often perish due to exposure to oils, road salt, and ozone, leading to excessive movement in the sway bar. These Prothane bushings are engineered to maintain their shape and provide a firm, stable mount for the sway bar, ensuring immediate suspension response during cornering.

• Part Number: 1-1107
• Material: High-density polyurethane
• Color: Red
• Bushing Size: 1-1/8 inch (1.125in) ID
• Fitment Type: Direct replacement for factory mounts
• Resistant to road chemicals and oils

Fits 1984-2001 Jeep Cherokee and Comanche models.

Replace your soft, factory rubber components with these Prothane front sway bar bushings to restore handling precision. Unlike OE rubber that degrades over time due to oil, ozone, and heat, these polyurethane bushings are engineered to maintain their shape and provide a stable mounting point for the sway bar. This upgrade reduces deflection and body roll, ensuring more consistent tire contact and improved steering response.

• Bore Diameter: 25mm
• Material: High-performance polyurethane
• Finish: Red
• Resistant to road chemicals, grease, and oil
• Replaces worn factory bushings for better suspension geometry
• Manufacturer Part Number: 1-1104

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models with a 15/16-inch front sway bar.

Replace your soft, worn-out factory rubber bushings with this Prothane polyurethane front sway bar bushing kit. Over time, standard rubber bushings degrade from exposure to oil, road salt, and ozone, leading to sloppy steering and excessive body roll. Prothane polyurethane is a superior alternative that provides the necessary stiffness to keep your sway bar properly located while maintaining enough flexibility for off-road articulation.

These red bushings are precision-molded for a direct fit to the 15/16-inch diameter front sway bar found on many CJ-series Jeeps. By minimizing deflection, these bushings help stabilize your suspension geometry and provide more predictable handling on and off the trail.

• Part Number: 1-1101
• Material: Polyurethane
• Color: Red
• Inner Diameter: 15/16-inch
• Compatible with factory mounting hardware

Fits 1968-1971 Jeep Jeepster Commando.

Restore the structural integrity and body alignment of your classic Jeep with this Prothane Body Mount Kit. Original rubber body mounts are prone to drying out, cracking, and sagging over time, which often leads to body-to-frame misalignment and increased road vibration. This kit replaces those failing factory components with high-performance polyurethane bushings designed for longevity and precision.

• Precision-engineered for 1968-1971 Jeep Jeepster Commando models
• Formulated from heavy-duty polyurethane to resist oil, grease, and road contaminants
• Maintains proper body-to-chassis clearance and alignment
• Provides a firm yet compliant connection that outperforms standard rubber
• Includes necessary bushings for a complete body mount refresh
• Manufacturer Part Number: 1-108-BL
• Finish: Black

Fits 1997-2006 Jeep Wrangler TJ models, including 65th Anniversary Edition, Rubicon, Sahara, SE, Sport, and X.

Restore structural integrity and body-to-frame alignment with the Prothane Body Mount Kit. Over time, original equipment rubber mounts compress, crack, and rot, leading to body sag and poor handling characteristics. This kit replaces those soft factory components with high-performance polyurethane, which provides the necessary rigidity to maintain proper body height while offering the durability needed for both street and off-road use.

Unlike rubber, Prothane’s polyurethane formula is impervious to road salt, oil, and grease, ensuring the bushings won't perish under harsh undercar conditions. This kit is designed as a direct replacement for the factory mounts, providing a precision fit that helps eliminate the excess movement associated with worn OE bushings.

• Maintains proper body-to-frame alignment and height
• High-density polyurethane construction resists compression and environmental rot
• Precision-engineered for 1997-2006 Jeep TJ chassis
• Black finish for a clean, OE-style appearance
• Manufacturer Part Number: 1-107-BL

Fits select 1963-1991 Jeep Wagoneer, Grand Wagoneer, and Cherokee (including Chief, Laredo, and Wide Track models).

Restore the structural integrity and body-to-frame alignment of your classic Jeep with the Prothane 1-106-BL Polyurethane Body Mount Kit. Over decades of use, factory rubber mounts inevitably dry-rot, compress, and crack, leading to cabin vibrations, body sag, and misalignment. These black polyurethane mounts provide a more durable, rigid connection that holds up to the stresses of both street driving and off-road use.

Prothane engineers their bushings to be impervious to oils, road salt, and environmental contaminants that quickly degrade OE rubber. This kit replaces the critical mounting points between the chassis and the body, ensuring your Jeep maintains its correct ride height and handling characteristics. It is an essential upgrade for any Full-Size Jeep (FSJ) restoration project.

• Manufacturer Part Number: 1-106-BL
• Material: High-Durometer Polyurethane
• Finish: Black
• Improves body-to-frame rigidity and alignment
• Resistant to road chemicals and atmospheric conditions
• Replaces worn-out factory rubber mounts

Fits select 1963-1991 Jeep Wagoneer, Grand Wagoneer, and Cherokee models.

Over time, original equipment rubber body mounts deteriorate from exposure to the elements and road grime, leading to body sag, misalignment, and increased noise, vibration, and harshness (NVH). The Prothane 1-106 Body Mount Kit replaces these soft, worn-out components with high-density red polyurethane. These mounts provide a firmer foundation for the vehicle body, maintaining critical body-to-frame alignment and restoring the structural integrity of your Jeep's chassis.

Unlike OEM rubber that rots or cracks, Prothane's polyurethane formula is resistant to oil, grease, and environmental contaminants, ensuring long-lasting performance on and off the road. This kit is engineered to provide the necessary rigidity for improved handling while remaining resilient enough for a comfortable ride.

• Manufacturer Part Number: 1-106
• Material: High-density Polyurethane
• Color: Red
• Replaces soft or rotted factory rubber mounts
• Resistant to automotive fluids and road salt
• Restores proper body-to-frame height and alignment

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Restore proper body-to-frame alignment and eliminate the sag caused by deteriorated factory rubber with the Prothane Body Mount Bushing Kit. These polyurethane components are engineered to provide a more durable connection between the chassis and body, resisting the compression and cracking that common OE rubber mounts suffer from over time.

• Polyurethane construction offers superior durability over factory rubber
• Resistant to road salt, engine oils, and environmental contaminants
• Maintains consistent body-to-chassis spacing and alignment
• Designed to fit factory mounting locations
• Black finish provides a clean, understated look
• Manufacturer Part Number: 1-105-BL

Fits 1987-1995 Jeep Wrangler (Base, Sahara, Sport, SE, and Renegade).

Over time, factory rubber body mounts degrade from road salt, oil, and ozone, leading to body sag and poor alignment between the chassis and body. This Prothane body mount kit replaces those soft OE components with a more durable solution, restoring proper ride height and improving the overall stability of your Wrangler. These mounts are designed to handle the stresses of off-road articulation while maintaining consistent body-to-frame spacing.

• Direct replacement for worn-out original equipment rubber mounts
• Restores and maintains proper body-to-frame alignment
• Includes hardware for a complete installation
• Finished in high-visibility red
• Manufacturer Part Number: 1-105

Fits select 1981-1986 Jeep CJ5, CJ7, and Scrambler models. This Prothane polyurethane body mount kit (Part #1-104-BL) is designed to replace soft, rotted, or compressed factory rubber mounts that lead to body-to-frame misalignment and excessive chassis noise.

Unlike OEM rubber, Prothane’s proprietary polyurethane formula is engineered to withstand the rigors of off-road use and environmental exposure. These bushings are resistant to road salts, engine oils, and UV rays, ensuring they won't crack or perish over time. By maintaining proper body-to-frame alignment, this kit improves overall vehicle rigidity and protects your body panels from unnecessary stress during articulation.

• Precision-molded polyurethane for long-term durability
• Maintains proper body-to-frame alignment and clearances
• Resistant to petroleum products and road grime
• Includes complete set of bushings for a full body mount replacement
• Manufacturer Part Number: 1-104-BL

Fits 1980-1986 Jeep CJ5 and CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, and Renegade).

Restore proper body-to-frame alignment and eliminate the body sag common in aging Jeeps with the Prothane 1-103-BL Body Mount Bushing Kit. Over decades of use, factory rubber mounts dry rot and compress, leading to poor door alignment, rattling, and compromised chassis stability. This 22-piece kit replaces those worn OE components with high-performance black polyurethane bushings designed for superior longevity and precise fitment.

Unlike soft rubber, Prothane’s polyurethane formulation is engineered to withstand the rigors of off-road use while remaining resistant to road salts, engine oils, and environmental chemicals. These bushings provide a firm, stable connection between the body and frame, ensuring your CJ maintains the correct ride height and radiator alignment for long-term durability.

• Complete 22-piece body mount bushing set
• Durable black polyurethane construction resistant to rot and compression
• Direct replacement for soft, deteriorated factory rubber mounts
• Restores body alignment and reduces cabin noise caused by worn bushings
• Manufacturer Part Number: 1-103-BL

Fits select 1974-1991 Jeep Cherokee, Comanche, Wagoneer, Grand Wagoneer, and J10 models. These Prothane polyurethane bushings are designed for vehicles equipped with 2-inch Outer Diameter (OD) main eyes on the front leaf springs.

Replace your soft, worn-out factory rubber bushings with high-performance polyurethane to restore suspension precision. Unlike OEM rubber, which deflects under load and degrades when exposed to oils and road grime, Prothane’s formula maintains its shape and integrity. This results in more consistent steering response, improved handling during articulation, and better axle alignment under heavy braking or acceleration.

• Replaces factory front leaf spring and shackle bushings
• Constructed from premium red polyurethane for superior durability
• Resistant to road salt, oils, and environmental contaminants
• Maintains better alignment and suspension geometry than rubber
• Designed specifically for springs with a 2-inch OD main eye
• Manufacturer Part Number: 1-1014

Fits 1955-1973 Jeep Willys CJ-5 and CJ5 Base models.

Restore the structural integrity and alignment of your vintage Jeep with the Prothane polyurethane body mount bushing kit. Over decades of use, factory rubber mounts dry rot, compress, and crack, leading to body sag and increased cabin vibration. This 14-piece kit replaces those worn OE components with high-performance polyurethane that provides superior durability and maintains the proper body-to-frame relationship.

Unlike traditional rubber, Prothane's polyurethane formula is resistant to road salts, oils, and automotive chemicals, ensuring these mounts won't perish under harsh off-road or street conditions. This kit is a direct-fit solution designed to provide a firmer, more stable ride while protecting your Jeep's sheet metal from the stresses of frame flex.

• Precision-engineered 14-piece bushing set
• High-grade polyurethane construction resists compression and rot
• Maintains critical body-to-frame alignment
• Black finish for a discrete, factory-style appearance
• Manufacturer Part Number: 1-101-BL

Fits 1987-1996 Jeep models. Restore front suspension stability and steering precision by replacing soft, worn-out rubber components with the Prothane 1-1005-BL Front Spring and Shackle Bushing Kit.

Engineered to maintain proper leaf spring alignment under load, these bushings are made from high-grade black polyurethane. Unlike factory rubber that degrades when exposed to the elements, Prothane's polyurethane formula is resistant to road grime, oils, and environmental contaminants, ensuring a longer service life and more predictable handling characteristics.

• Direct replacement for front spring and shackle bushings
• High-durability polyurethane construction prevents deflection
• Resistant to oils, grease, and atmospheric conditions
• Improves suspension geometry and steering feedback
• Manufacturer Part Number: 1-1005-BL

Fits 1987-1996 Jeep models. The Prothane 1-1005 Front Spring and Shackle Bushing Kit is engineered to replace soft, original equipment rubber bushings that often deteriorate due to road grime, oil, and environmental exposure. By upgrading to Prothane’s precision-molded polyurethane, you restore steering precision and maintain consistent suspension geometry that rubber simply cannot provide over the long term.

These red polyurethane bushings offer superior durability and resistance to the elements, making them an essential upgrade for both daily drivers and off-road builds. This kit provides a firm pivot point for your front leaf springs and shackles, reducing unwanted movement and improving the overall handling characteristics of the vehicle.

• Fits 1987-1996 Jeep models
• Premium red polyurethane construction for maximum durability
• Resistant to oils, grease, and road contaminants
• Includes bushings for both front leaf springs and shackles
• Replaces worn OE rubber components to restore handling
• Manufacturer Part Number: 1-1005

Fits 1976-1986 Jeep CJ5 and CJ7 models.

Restore suspension precision and durability to your Jeep CJ with the Prothane 1-1003-BL Rear Spring & Shackle Bushing kit. Over time, original equipment rubber bushings dry rot, crack, and compress, leading to sloppy handling and erratic spring movement. These Prothane bushings are engineered from high-quality polyurethane to provide a firmer, more stable mounting point for your leaf springs and shackles.

Unlike rubber, this polyurethane formula is resistant to road salts, oils, and environmental contaminants that typically degrade suspension components. This kit provides the necessary stiffness to maintain proper axle alignment under load while remaining resilient enough for off-road articulation.

• Direct replacement for soft or worn-out factory rubber bushings
• High-density polyurethane construction for superior longevity
• Improves suspension geometry and handling response
• Resistant to oils, grease, and road grime
• Color: Black
• Manufacturer Part Number: 1-1003-BL

Fits 1976-1986 Jeep CJ5 and CJ7.

Replace mushy factory rubber with the Prothane 1-1003 Rear Spring and Shackle Bushing Kit to restore handling precision and suspension stability. These red polyurethane bushings are engineered to provide a firmer mounting point for your leaf springs and shackles, preventing the deflection often found in aged OE components. Unlike rubber, these high-performance bushings resist degradation from road salt, oil, and environmental contaminants, ensuring your Jeep stays trail-ready for years to come.

• Replaces soft factory rubber for improved suspension geometry
• High-grade red polyurethane construction for maximum durability
• Resistant to oil, grease, and road chemicals
• Complete kit for rear leaf spring and shackle locations
• Manufacturer Part Number: 1-1003

Fits 1976-1986 Jeep CJ5 and CJ7.

Restore the handling and stability of your classic Jeep with the Prothane 1-1002-BL Front Spring and Shackle Bushing Kit. Over time, factory rubber bushings dry rot, crack, and compress, leading to excessive spring deflection and a vague steering feel. This kit replaces those soft components with high-density black polyurethane, providing a firmer pivot point that maintains proper suspension geometry during both highway driving and off-road articulation.

• Replaces worn OE rubber front spring and shackle bushings
• High-performance polyurethane resists grease, road salt, and oils
• Reduces leaf spring slop for improved steering precision
• Black finish for a clean, factory-plus appearance
• Manufacturer Part Number: 1-1002-BL