Fits 2010-2016 Hyundai Genesis Coupe.

R1 Concepts Stainless Steel Brake Hoses are engineered to eliminate the expansion and sponginess common in factory rubber lines. By replacing the OE hose with a high-strength stainless steel braided weave over a PTFE inner core, these lines maintain consistent hydraulic pressure for a firmer, more responsive brake pedal. This increased efficiency allows for precise brake modulation during spirited driving, towing, or track use.

Each hose is encased in an abrasion-resistant clear PVC coating to protect the stainless steel braid from debris, corrosion, and chafing, ensuring a long service life in harsh environments. These precision-engineered lines are US DOT approved, meeting rigorous safety standards for street and performance applications.

• Construction: Braided stainless steel exterior prevents hose swell under high pressure.
• Inner Core: High-grade PTFE for superior chemical and heat resistance.
• Protection: Clear PVC outer coating shields against dirt, grit, and corrosion.
• Safety: United States DOT approved for street-legal use.
• Installation: Direct-fit design with included banjo bolts and copper washers (where applicable).
• Position: Right Rear (RR)
• Part Number: HSK-03125

Fits 2000-2006 BMW X5.

Replace soft, expanding factory rubber lines with the R1 Concepts HSK-31012 Stainless Steel Braided Brake Hose to restore firm, consistent pedal feel. Designed for both daily driving and performance use, these front brake hoses eliminate the spongy response caused by hydraulic pressure expansion. This increased efficiency allows for more precise brake modulation, providing greater confidence during aggressive driving, towing, or off-road applications.

Each hose is constructed with a PTFE inner core that provides superior resistance to high temperatures and chemical degradation. This core is wrapped in a high-strength stainless steel braided weave to maintain structural integrity under pressure, then finished with a clear PVC outer coating to protect against abrasion, corrosion, and road debris. These lines are precision-engineered to meet strict safety standards and ensure a direct-fit installation using factory mounting points.

• High-strength stainless steel braided exterior reduces line expansion
• PTFE inner core for maximum pressure resistance and fluid compatibility
• Clear abrasion-resistant PVC coating protects against chaffing and debris
• United States DOT approved for street use and safety compliance
• Includes banjo bolts and copper washers where applicable for a complete install
• Direct-fit design replaces OE rubber hoses without modification
• Manufacturer Part Number: HSK-31012

Fits 2004-2011 Subaru Impreza WRX STi (Right Rear).

R1 Concepts stainless steel braided brake hoses are engineered to replace soft factory rubber lines, eliminating the expansion and "spongy" pedal feel often experienced under heavy braking or during performance driving. By maintaining internal pressure more efficiently, these hoses provide a firmer, more responsive brake pedal and improved modulation for street, track, or spirited use.

Construction features a high-grade PTFE inner core that resists chemical degradation and withstands high temperatures. This core is wrapped in a high-strength stainless steel braid to prevent hose expansion under extreme hydraulic pressure, then finished with a clear, abrasion-resistant PVC outer coating. This coating protects the stainless braid from debris, road salt, and chaffing against suspension components, ensuring a long service life.

• Direct-fit design for the right rear position
• Stainless steel braided exterior prevents line swell under pressure
• PTFE inner core for superior hydraulic efficiency and heat resistance
• Clear PVC outer coating prevents abrasion and corrosion
• United States DOT approved for street use and safety compliance
• Includes required banjo bolts and copper washers (where applicable)
• Manufacturer Part Number: HSK-13075

Fits 2000-2007 Subaru Legacy (Left Front).

The R1 Concepts HSK-13026 Left Front Stainless Steel Brake Hose is designed to eliminate the "mushy" pedal feel associated with factory rubber lines. While standard rubber hoses expand under hydraulic pressure, this stainless steel braided hose maintains its shape, ensuring immediate brake response and more precise modulation. This is a critical upgrade for drivers looking for consistent performance during aggressive street driving, towing, or heavy-duty use.

Built for long-term durability, the hose features a PTFE inner core resistant to heat and pressure, wrapped in a high-strength stainless steel weave. An abrasion-resistant clear PVC outer coating protects the assembly from road grit, debris, and corrosion. This direct-fit component bolts to factory mounting points and includes necessary hardware for a straightforward installation.

• Manufacturer Part Number: HSK-13026
• Inner Core: High-pressure PTFE for superior chemical and thermal stability
• Exterior: Stainless steel braided weave prevents hose expansion and line flex
• Coating: Clear PVC outer jacket for abrasion and corrosion protection
• Compliance: United States DOT approved for street use
• Installation: Direct-fit design with factory-style mounting brackets (where applicable)
• Included Hardware: Banjo bolts and copper washers included where required

Fits 1996-2002 BMW Z3 (Front).

R1 Concepts stainless steel brake lines eliminate the spongy feel associated with factory rubber hoses. Under high hydraulic pressure, standard rubber lines can expand, leading to a soft brake pedal and inconsistent response. These performance lines utilize a high-strength stainless steel braided weave over a PTFE inner core to prevent expansion, ensuring maximum pressure reaches the calipers for a firmer, more predictable pedal feel during spirited driving or heavy braking.

Built for durability in demanding conditions, each line is protected by a clear, abrasion-resistant PVC outer coating that shields the braid from dirt, debris, and corrosion. These DOT-approved lines are precision-engineered as a direct-fit replacement, maintaining factory-style mounting for a secure installation. Whether for street performance or daily driving, these hoses provide the hydraulic efficiency and driver confidence needed for precise brake modulation.

• High-strength stainless steel braided exterior reduces line expansion
• PTFE inner core provides superior pressure resistance and consistent performance
• Clear abrasion-resistant PVC coating protects against chaffing and debris
• DOT approved for street use and safety compliance
• Includes banjo bolts and copper washers where applicable
• Direct-fit design with factory-style mounting brackets
• Manufacturer Part Number: HSK-31006

Fits 1998-2002 Subaru Forester (Right Rear).

The R1 Concepts HSK-13050 Stainless Steel Brake Hose is engineered to eliminate the spongy pedal feel common with aged factory rubber lines. Unlike traditional hoses that expand under hydraulic load, this braided line maintains its shape to deliver consistent brake pressure and improved modulation. This direct replacement improves hydraulic efficiency for better driver confidence during heavy braking, towing, or performance driving.

The assembly features a high-grade PTFE inner core for superior chemical and pressure resistance, wrapped in a high-strength stainless steel braided weave. A clear, abrasion-resistant PVC outer coating provides an additional layer of protection against road debris, dirt, and corrosion. Designed as a bolt-on upgrade, it uses precision-engineered fittings and includes necessary hardware for a secure, factory-style installation.

• Stainless steel braided exterior prevents line expansion for a firmer, more responsive pedal
• PTFE inner core provides superior pressure resistance and fluid compatibility
• Clear PVC outer coating protects against chaffing and environmental corrosion
• United States DOT approved for street use and safety compliance
• Direct-fit design includes banjo bolts and copper washers where applicable
• Manufacturer Part Number: HSK-13050

Fits 2005-2006 Saab 9-2X.

Upgrade your vehicle's braking response with this R1 Concepts stainless steel braided brake hose. Designed for the left front position, this hose replaces the factory rubber line to eliminate the expansion and "spongy" pedal feel common under heavy braking or high-heat conditions. By maintaining consistent hydraulic pressure, it provides a firmer, more predictable pedal feel during daily driving, towing, or spirited performance use.

Engineered for durability, this brake line features a PTFE inner core resistant to high pressures and chemical degradation. This core is protected by a high-strength stainless steel braided exterior that prevents line flex and swelling. An abrasion-resistant clear PVC outer coating adds a final layer of protection against road debris, dirt, and corrosion, ensuring a long service life in harsh environments.

• Direct-fit design for the left front position ensures secure factory-style mounting.
• Stainless steel braided exterior reduces line expansion for improved modulation.
• PTFE inner core provides superior heat and pressure resistance.
• Clear PVC coating protects against abrasion and corrosion.
• United States DOT approved for street-legal safety and compliance.
• Includes banjo bolt and copper washers where applicable for a complete installation.
• Manufacturer Part Number: HSK-13024

Fits 2008-2014 Subaru Impreza WRX (Left Rear).

R1 Concepts stainless steel brake lines replace soft factory rubber hoses to eliminate the spongey pedal feel often associated with aggressive driving or aged components. These hoses feature a PTFE inner core reinforced with a high-strength stainless steel braid, preventing line expansion under high hydraulic pressure for a firmer, more consistent brake response. A clear PVC outer coating adds a layer of protection against abrasion, debris, and corrosion, ensuring long-term durability in harsh environments.

Engineered for direct-fit installation, these brake lines use precision fittings to mount securely to factory points. Each kit is DOT approved, meeting strict safety standards for street and performance use. By improving hydraulic efficiency, these lines allow for better brake modulation, making them a critical upgrade for daily drivers, spirit street performance, and towing applications.

• PTFE inner core for maximum pressure resistance and thermal stability
• Stainless steel braided exterior prevents hose expansion and line flex
• Clear PVC abrasion-resistant coating protects against road salt and debris
• DOT approved for safety and street compliance
• Includes necessary banjo bolts and copper washers for installation
• Manufacturer Part Number: HSK-13074

Fits 2004-2007 Subaru Impreza (Left Front).

Replace your soft factory rubber lines with this R1 Concepts stainless steel braided brake hose to eliminate the spongy pedal feel caused by hose expansion under pressure. Engineered for both daily driving and spirited performance, this line uses a PTFE inner core that remains stable under high hydraulic loads, ensuring immediate and consistent brake response. The high-strength stainless steel braided weave provides a durable outer structure, while a clear PVC jacket protects against abrasion, road salt, and debris to prevent premature corrosion.

• Prevents line expansion for a firmer, more responsive brake pedal
• High-strength PTFE inner core for superior pressure and heat resistance
• Stainless steel braided exterior for structural integrity and durability
• Clear PVC outer coating protects against chafing and dirt
• DOT approved for street use and safety compliance
• Includes required banjo bolt and copper washers (MPN: HSK-13030)
• Direct-fit design for seamless installation to factory mounting points

Fits 2003 Subaru Baja (Upper Rear).

The R1 Concepts Stainless Steel Brake Hose (HSK-13057) is engineered to replace soft factory rubber lines, providing a firmer and more predictable pedal feel. By utilizing a high-strength stainless steel braided weave over a PTFE inner core, these hoses resist expansion under high hydraulic pressure, ensuring that braking force is transmitted directly to the calipers rather than being lost to hose wall flex.

Each line is finished with a clear, abrasion-resistant PVC outer coating to protect the stainless braid from dirt, debris, and corrosion. These lines are United States DOT approved, meeting strict safety standards for street use and performance applications like towing or spirited driving. The direct-fit design ensures a secure installation using precision-engineered fittings.

• Stainless steel braided exterior prevents line expansion and improves pedal response
• PTFE inner core for superior thermal stability and pressure resistance
• Abrasion-resistant clear PVC coating protects against chaffing and corrosion
• Direct-fit design ensures easy installation at factory mounting points
• Includes banjo bolts and copper washers where applicable
• United States DOT approved for street and performance use
• Manufacturer Part Number: HSK-13057

Fits 2005-2006 Saab 9-2X.

Upgrade your braking system with the R1 Concepts Right Rear Stainless Steel Brake Hose, engineered to replace soft factory rubber lines that expand under pressure. This hose features a PTFE inner core wrapped in a high-strength stainless steel braided weave, which effectively eliminates line expansion. The result is a firmer, more responsive pedal feel and consistent hydraulic pressure, crucial for daily driving, towing, or spirited performance.

For long-term durability, the braided exterior is encased in a clear, abrasion-resistant PVC coating. This layer protects the stainless steel from dirt, debris, and chaffing against other chassis components. Designed as a direct-fit replacement (MPN: HSK-13062), this hose meets United States DOT standards for street use and includes the necessary hardware for a secure installation.

• PTFE inner core provides superior pressure resistance and consistent performance
• High-strength stainless steel braid reduces line flex and pedal sponginess
• Clear PVC outer coating protects against abrasion, corrosion, and debris
• United States DOT approved for safety compliance on public roads
• Direct-fit design with included banjo bolts and copper washers where applicable
• Manufacturer Part Number: HSK-13062

Fits 2010-2016 Hyundai Genesis Coupe (Right Front position).

Upgrade your braking system with this R1 Concepts stainless steel braided brake hose, designed to eliminate the expansion and sponginess common in factory rubber lines. By replacing the OE hose with a high-strength PTFE inner core wrapped in a stainless steel weave, this hose maintains consistent hydraulic pressure and provides a firmer, more communicative pedal feel during aggressive driving, towing, or daily commuting.

• Stainless Steel Braiding: Prevents hose expansion under high pressure for precise brake modulation.
• PTFE Inner Core: Provides superior chemical resistance and high-pressure durability.
• PVC Outer Coating: Clear abrasion-resistant layer protects against road debris, dirt, and corrosion.
• Direct-Fit Hardware: Engineered with precision fittings and includes necessary copper washers and brackets where applicable for a secure installation.
• DOT Approved: Meets strict United States DOT safety and quality standards for street use.
• Part Number: HSK-03054

Fits select 2005-2020 Subaru Impreza, WRX, and WRX STI models. These DFC GeoPerformance brake rotors are engineered for drivers seeking enhanced heat dissipation and consistent stopping power during spirited driving or daily commuting.

The drilled and slotted design serves a dual purpose: the cross-drilled holes allow for rapid cooling to prevent brake fade, while the slots sweep away water, gas, and dust to maintain a clean contact patch between the pad and rotor. Every GeoPerformance rotor is treated with a specialized coating to protect the hub and internal vanes against corrosion, ensuring a clean appearance and easy removal during future maintenance.

• Precision-machined for a direct bolt-on fit to factory mounting points
• Cross-drilled holes reduce rotor temperatures and help prevent heat soak
• Slotted surface clears debris and outgasses for better initial bite
• GeoPerformance anti-corrosive coating protects against rust and road salt
• Balanced to ensure vibration-free performance
• Designed to meet or exceed OE tolerances

Fits select 2018-2022 Genesis G70 and Kia Stinger (GT, GT1, GT2, GTS, Sport, and Prestige models).

R1 Concepts Carbon Series brake rotors are engineered for improved thermal management and consistent stopping power during spirited street driving. This front rotor set features a cross-drilled and diamond-slotted design that effectively vents gas and heat while continuously cleaning the brake pad surface for a more predictable pedal feel and reduced fade.

• Precision-drilled holes enhance ventilation and dissipate heat to prevent rotor warping and cracking under thermal stress.
• Diamond-slotted surface increases initial pad bite and serves as a visual wear indicator for easy maintenance checks.
• Cast from high-quality G3000 grade iron for structural integrity and long-term durability.
• Black zinc finish provides a protective layer against rust and corrosion on non-friction surfaces.
• Direct OE-replacement design ensures a bolt-on fit without the need for vehicle modifications.

Includes: (2) High-Performance Front Brake Rotors.

Fits 2022-2023 Genesis G70 and Kia Stinger (GT-Line).

Upgrade your braking system with this complete R1 Concepts front and rear rotor set. Designed for drivers seeking improved heat management and consistent pedal feel, these rotors feature a precision drilled and slotted pattern. The cross-drilled holes allow for maximum heat dissipation to prevent brake fade during spirited driving, while the diamond-slotted design wipes away debris and gases that build up between the pad and rotor surface.

• Complete set including both front and rear rotors for a full vehicle upgrade.
• Cross-drilled holes significantly reduce operating temperatures.
• Precision-cut slots maintain clean pad surfaces and improve bite.
• Silver zinc plating provides a durable layer of protection against corrosion and rust.
• Direct-fit design ensures easy installation into factory braking systems without modification.

Each rotor is cast to precise tolerances for smooth, vibration-free operation. This silver series rotor set is an ideal solution for daily drivers and performance enthusiasts alike who want to combine modern aesthetics with reliable stopping power.

Upgrade your braking performance and heat dissipation with the R1 Concepts eLine Series brake rotor kit. Engineered for select 2007-2020 Cadillac Escalade, Chevrolet Silverado, Tahoe, Suburban, and GMC Sierra/Yukon models, these rotors provide a direct-fit replacement for factory equipment without requiring any modifications.

These rotors feature a diamond-slotted design that increases pad bite and serves as a visual wear indicator, while the precision-drilled holes allow for superior heat venting and outgassing during heavy braking. Each rotor is cast from G3000/G11H18 specification iron for maximum durability and stability under load. The non-directional finish ensures a faster pad bed-in process and contributes to quieter, smoother stops.

• Fits select 2007-2020 Cadillac Escalade, Chevrolet Silverado 1500/LD, Tahoe, Suburban 1500, Avalanche, and GMC Sierra 1500/Limited, Yukon/XL.
• Diamond-slotted surface improves pad contact and clears debris.
• Cross-drilled holes reduce rotor temperature to prevent brake fade.
• Cast from G3000/G11H18 grade iron for long-term reliability.
• Silver rust protection coating helps prevent corrosion on non-friction surfaces.
• Complete set of four (4) rotors for front and rear axles.

Upgrade your vehicle’s braking performance with this R1 Concepts Carbon Series Front Brake Kit. This comprehensive kit provides a direct bolt-on solution designed for reliable street performance and improved heat management. The rotors are cast from G3000 grade iron for structural integrity and finished with silver zinc plating to protect against corrosion and rust.

The drilled and slotted design addresses common braking issues: precision-drilled holes promote ventilation to dissipate heat and prevent cracking, while the diamond-cut slots increase pad bite and clear away debris. These slots also serve as a visual wear indicator. The included Optimum OE pads utilize a low-dust, asbestos-free OEp formulation, paired with noise-reducing shims for a quiet, consistent pedal feel during daily driving.

• G3000 grade cast iron rotors with silver zinc finish for rust protection
• Precision-drilled holes for maximum heat dissipation and ventilation
• Diamond slotted design increases brake bite and clears brake dust
• Low-dust Optimum OE brake pads with noise-dampening shims
• Kit includes (2) front rotors, (4) front brake pads, and installation hardware
• Direct O.E.M. specification fitment requires no vehicle modifications

Fits select 2018-2022 Genesis G70 and Kia Stinger models (GT, GT1, GT2, and GTS).

Upgrade your braking system with the R1 Concepts eLine Series rotor kit, designed to provide consistent street performance and superior heat management. These rotors are manufactured from high-quality G3000 grade cast iron and feature a protective black zinc finish to prevent rust and corrosion. The combination of precision-drilled holes and diamond slots ensures your brakes remain cool and clear of debris, providing a more responsive pedal feel and longer pad life.

• Precision-drilled holes enhance ventilation and dissipate heat to prevent rotor warping and cracking.
• Diamond-slotted design increases brake pad bite while serving as a clear wear indicator for maintenance timing.
• G3000 grade cast iron construction provides reliable durability for daily driving conditions.
• Black zinc coating offers a clean aesthetic and essential protection against oxidation.
• Direct bolt-on fitment following OEM specifications ensures installation without vehicle modification.
• Complete set includes (4) high-performance rotors for both front and rear axles.

Fits select 2002-2015 Acura ILX and RSX, and Honda Civic and CR-V models.

R1 Concepts eLine Series brake rotors provide a direct-fit performance upgrade for your factory braking system. Engineered to meet G3000/G11H18 cast iron specifications, these rotors offer the stability and reliability of an OEM part with the added benefits of cross-drilling and diamond-slotting. The cross-drilled holes maximize heat dissipation to prevent brake fade, while the diamond slots increase pad bite and serve as a convenient rotor wear indicator. Each rotor is finished with a non-directional surface to promote faster pad bed-in and quieter operation, along with a silver coating for enhanced rust protection on non-friction surfaces.

• Includes (2) high-performance eLine Series front brake rotors
• G3000/G11H18 grade cast iron construction for maximum durability
• Precision-drilled holes for superior heat management and cooling
• Diamond-slotted design increases initial bite and clears surface debris
• Non-directional finish ensures a smoother, quieter break-in period
• Silver coating provides essential rust protection for lasting aesthetics
• Direct bolt-on replacement requires no vehicle modifications

Fits 2018-2022 Kia Stinger GT, GT1, GT2, and GTS models.

This R1 Concepts eLine Series complete brake kit provides a comprehensive performance upgrade for your Kia Stinger, replacing both front and rear rotors and pads. The drilled and slotted rotor design optimizes thermal management by dissipating heat and allowing brake gases and debris to escape the contact patch. Each rotor is cast from G3000 grade iron for high tensile strength and mill-balanced to ensure vibration-free operation. The black zinc finish provides a durable barrier against corrosion on the hub and vanes.

The included Optimum OEp pads are formulated for consistent stopping power with minimal dust and noise. These pads feature a specialized formulation that resists brake fade during spirited driving and come equipped with shims to eliminate unwanted harmonic squeal. This all-in-one kit is designed to bolt directly to factory mounting points with no modifications required.

• Complete kit includes (4) drilled and slotted rotors and (8) Optimum OEp pads
• Precision-drilled holes for maximum heat dissipation and ventilation
• Diamond-cut slots help maintain a clean pad surface and improve bite
• G3000 grade cast iron construction for long-term durability
• Black zinc electroplating prevents rust and corrosion
• Low-dust, asbestos-free ceramic-based formulation for cleaner wheels
• Includes necessary installation hardware

Fits select 2011-2015 Subaru BRZ and Impreza (2.5i / 2.5i Premium / Limited / Premium / Series.Blue / Outback Sport).

This R1 Concepts Carbon Series brake kit provides a complete front and rear solution for street performance and daily reliability. The set includes four diamond-slotted rotors and eight Optimum OE formulation brake pads, specifically engineered to replace worn factory components with improved heat dissipation and pad bite.

The rotors are cast from high-strength G3000/G11H18 metallurgy to meet strict OEM standards for stability and durability. A non-directional finish is applied to ensure faster pad bed-in and quieter operation, while the diamond slots serve as a clear wear indicator and help clear debris for consistent friction. The included low-dust, asbestos-free pads feature premium shims to eliminate brake squeal and maintain clean wheels.

• Cast from G3000/G11H18 iron for high-tensile strength and thermal stability
• Diamond slotted design increases initial bite and extends service life
• Non-directional surface finish promotes smooth, quiet pad bedding
• Low-dust Optimum OE pad formulation with noise-reducing shims
• Complete kit includes 4 rotors, 8 pads, and necessary installation hardware

Fits select 1997-2015 Acura ILX, Honda Civic, and Honda Prelude.

The R1 Concepts eLine Series Rear Drilled and Slotted Brake Rotor Set provides reliable street performance and improved thermal management for your braking system. These rotors are cast from premium G3000/G11H18 specification iron to match OEM standards for durability and stability. The drilled and slotted design increases initial pad bite and serves as a functional wear indicator, while the silver coating offers protection against corrosion.

• Precision Drilled & Slotted: Maximizes heat dissipation and clears away dust and gases for consistent performance.
• G3000 Cast Iron: High-quality metallurgy ensures long-lasting reliability and resistance to warping.
• Non-Directional Finish: Each rotor features a non-directional finish to promote faster, quieter pad bed-in.
• Silver Protection: Finished with a silver coating to provide rust protection for a cleaner look behind the wheels.
• Direct Replacement: Designed to fit factory mounting points with no modifications required.

Specifications:

• Location: Rear
• Design: Drilled and Diamond Slotted
• Material: G3000/G11H18 Cast Iron
• Finish: Silver
• Quantity: Set of 2 Rotors
• Manufacturer Part Number: eLine Series

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum.

Upgrade your vehicle's stopping power and thermal management with the R1 Concepts Carbon Series Brake Rotor Set. These high-performance rotors are engineered for reliable street use, featuring a precision-drilled and diamond-slotted design that significantly improves cooling and debris evacuation. The cross-drilled holes enhance ventilation to dissipate heat and prevent surface cracking, while the signature diamond slots sweep away gas, dust, and moisture to ensure consistent pad bite and serve as a visual wear indicator.

Every rotor is cast from G3000 grade iron for maximum durability and thermal stability. To ensure a long-lasting professional look, the rotors are finished with a black zinc plating that protects against rust and corrosion on the hub, vanes, and edges. Built to strict O.E.M. specifications, these rotors bolt directly to your factory mounting points with no modifications required.

• Material: Heavy-duty G3000 grade cast iron for reliable structural integrity.
• Heat Management: Precision-drilled holes maximize airflow to reduce brake fade.
• Consistent Friction: Diamond slots maintain a clean pad surface for improved stopping power.
• Corrosion Resistance: Black zinc finish prevents rust on non-friction surfaces.
• Direct Fit: Designed as a bolt-on replacement for the factory front rotors.
• Part Type: Carbon Series Front Brake Rotor Set.

Included: (2) High-performance front drilled and slotted brake rotors.

Fits 2013-2015 Acura ILX and Honda Civic (EX and EX-L submodels).

The R1 Concepts eLine Series brake kit is an all-in-one replacement solution designed to restore factory stopping power and reliability. This complete set includes front and rear rotors paired with Optimum OEp formulation pads, providing a direct-fit upgrade that addresses common braking issues like pulsation, noise, and excessive dust.

Each rotor is engineered from G3000/G11H18 cast iron for high-temperature stability and durability. The rotors are mill-balanced for vibration-free rotation and feature a non-directional finish to facilitate faster pad bed-in and quieter operation. The included Optimum OEp pads are equipped with noise-reducing shims and an asbestos-free friction material that maintains consistent fade resistance during daily driving.

• Complete kit includes (4) high-performance brake rotors and (8) Optimum OEp pads
• G3000/G11H18 cast iron specification for OEM-grade durability
• Non-directional finish ensures smooth, quiet stops and even pad wear
• Low-dust friction formula keeps wheels cleaner for longer
• Includes all necessary installation hardware for a complete service
• Precision-validated for correct metallurgy and brake plate thickness

Fits select 2007-2018 Lexus ES300h, ES350 and Toyota Avalon and Camry models.

The R1 Concepts eLine Series brake kit provides a complete front-end solution for daily driving reliability and safety. This all-in-one replacement kit includes two precision-engineered brake rotors and a full set of Optimum OE pads with necessary hardware, designed to restore factory-level stopping power without the need for modifications.

Each rotor is cast from high-strength G3000/G11H18 grade iron to ensure maximum durability and heat dissipation. These rotors are mill-balanced to prevent vibration and ensure smooth, consistent contact with the pads. To combat environmental wear, the rotors feature protective coating for improved rust resistance on non-friction surfaces. The included brake pads are formulated with a low-dust, asbestos-free compound that provides excellent fade resistance and includes premium shims to eliminate brake squeal and noise during operation.

• Manufactured to G3000/G11H18 cast iron metallurgy standards
• Mill-balanced for vibration-free rotation and proper plate thickness
• Low-dust OE formulation for cleaner wheels and consistent friction
• Integrated noise-reducing shims to prevent brake squeal
• Direct bolt-on fitment replaces factory hardware with no modifications
• Complete kit includes (2) front rotors, (4) pads, and installation hardware

Fits select 2022-2023 Genesis G70 and Kia Stinger models (2.5L).

R1 GEO-Carbon Series brake rotors provide a significant performance upgrade over factory components, combining effective heat management with long-lasting durability. This complete front and rear set features a cross-drilled and slotted pattern designed to mitigate brake fade by allowing heat and friction gases to escape quickly. The precision-machined slots also work to sweep away water, dust, and debris, ensuring a clean contact patch between the brake pad and rotor for a more consistent initial bite.

Each rotor is finished with a proprietary GEO-Carbon coating. This specialized finish protects the non-friction surfaces—including the hub and internal vanes—from corrosion and rust, maintaining a clean appearance behind your wheels. Engineered as a direct bolt-on replacement, these rotors are cast to precise tolerances to ensure a smooth, vibration-free pedal feel under all driving conditions.

• Complete set including both front and rear brake rotors
• Drilled holes maximize airflow for superior cooling during heavy braking
• Slotted design maintains pad cleanliness and prevents glazing
• GEO-Carbon protective coating resists rust and environmental corrosion
• Precision-engineered for 2022-2023 Genesis G70 and Kia Stinger 2.5L applications
• Direct replacement for OEM rotor dimensions

Fits 2006-2015 Acura ILX and Honda Civic Si (Base / Si models).

The R1 Concepts eLine Series Drilled and Slotted Brake Rotor Set provides a direct-fit performance upgrade for your vehicle's braking system. These rotors are engineered to improve heat dissipation and reduce brake fade during repeated stops. The precision-drilled holes allow for maximum cooling, while the diamond-slotted design wipes away gas and debris to maintain a clean contact patch between the pad and the rotor surface. This design also serves as a built-in wear indicator, letting you know when it is time for a replacement.

Constructed from G3000/G11H18 cast iron for long-term stability and reliability, each rotor features a silver zinc plating for superior rust and corrosion protection. To ensure a faster and quieter bed-in process, the rotors are finished with a non-directional surface that promotes even pad wear and consistent pedal feel right out of the box.

• Complete 4-piece set for front and rear axles
• Drilled and slotted design for improved thermal management
• Silver zinc coating for enhanced corrosion resistance
• Precision-cast G3000/G11H18 iron construction
• Non-directional finish for smoother, quieter stops
• Direct OEM replacement with no modifications required

Fits 2022-2023 Genesis G70 and Kia Stinger (2.5L).

This complete set of R1 front and rear rotors provides a performance upgrade over factory blanks, specifically engineered for the 2.5L turbocharged platforms. These rotors feature a cross-drilled and slotted design to address heat soak and brake fade during spirited driving. The precision-drilled holes maximize airflow for superior heat dissipation, while the slots act as a scavenger, wiping away brake dust, gases, and debris to maintain consistent pad contact. Finished with a black coating, these rotors are designed to resist corrosion on the hub and vanes for a long-lasting, clean appearance.

• Precision cross-drilled holes for maximum thermal management
• Strategic slotting to vent gases and maintain a clean pad surface
• Black finish for enhanced corrosion resistance on non-friction surfaces
• Direct fit replacement for OE dimensions
• Complete set includes both front and rear rotors

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring).

Upgrade your vehicle's braking performance and thermal management with this R1 Concepts Slotted Series brake rotor set. These rotors are engineered as a direct bolt-on replacement for factory hardware, requiring no modifications for installation. Each rotor is cast from high-strength G3000 grade iron to ensure long-term durability and resistance to warping under heat stress.

The diamond slotted design serves two critical functions: it provides additional leading edges for the brake pads to bite into, improving overall stopping power, and it acts as a pathway for heat, moisture, and brake dust to escape the friction surface. This keeps the pads clean and significantly reduces brake fade during spirited driving or heavy use. Furthermore, the slots function as a visual wear indicator, letting you know when it is time for a replacement.

• Complete set of four (4) rotors for front and rear axles.
• Precision mill-balanced to ensure smooth, vibration-free operation.
• G3000 grade cast iron construction for superior metallurgy and heat dissipation.
• Black coating provides essential rust protection on non-friction surfaces.
• Diamond-slotted surface improves pad bite and clears out debris.
• Strict adherence to O.E.M. specifications for plate thickness and fitment.

Fits select 2013-2015 Acura ILX and Honda Civic (EX / EX-L).

This R1 Concepts Carbon Series complete brake kit provides a comprehensive street performance upgrade for your vehicle's braking system. By pairing diamond-slotted rotors with premium Optimum OE pads, this kit addresses common issues like brake fade, excessive dust, and uneven wear. The rotors are cast from G3000/G11H18 metallurgy to meet strict OEM specifications for thermal stability and long-term durability.

• Diamond Slotted Design: Increases initial pad bite and provides a clear visual indicator of rotor wear while helping to evacuate gasses and debris.
• G3000 Cast Iron: High-carbon metallurgy engineered for maximum reliability and resistance to warping under heat.
• Non-Directional Finish: Every rotor features a precision finish to ensure faster pad bed-in and quieter, smoother stops.
• Low-Dust Optimum OE Formulation: Asbestos-free brake pads designed for consistent friction levels and excellent fade resistance with minimal wheel dust.
• Complete Hardware Kit: Includes noise-reducing shims and necessary installation hardware for a professional-grade service.

Includes: (2) Front Slotted Rotors, (2) Rear Slotted Rotors, (8) Optimum OE Brake Pads, and Installation Hardware.