Add the bold iconic styling of the late model Mustang to your New Edge Pony with a set of Raxiom Icon Tail Lights. These tail lights feature built-in modern LED technology that is used for both the reverse lights and running light rings to dramatically transform the appearance of your 1999-2004 Mustang. Raxiom Icon LED Tail Lights are manufactured using state of the art LED electronic components with a simple plug-in connector that easily inserts into the stock wiring (or Raxiom sequential) tail light harness for a simple straight forward installation. The high intensity LED running light rings of these Raxion Icon Tail Lights not only look great, but they also improve your driving safety as they are much brighter than the standard factory incandescent bulbs making sure you are clearly seen at night. These Raxiom Icon LED Tail Lights are designed to work with your existing Raxiom Sequential Tail Light Harness to give your New Edge Pony the high tech styling of the late model Mustangs. If you would like a slower speed for the sequence of your tail lights after you install the optional Sequential Tail Light Harness, to get that modern muscle car styling, combine the Harness with the Raxiom Turn Signal Flasher V1 (For Incandescent Bulbs) or Raxiom Turn Signal Flasher V2 (For LED Bulbs). Raxiom Icon LED Tail Lights not only improve the appearance of your Mustang, but they also meet or exceed the strict guidelines set forth by the U.S. Department of transportation (DOT) making them DOT compliant under compliance# QR1300191. Bulbs are not included. These tail lights reuse the stock bulbs or you can upgrade to Raxiom LED Tail Light Bulbs. Raxiom LED Tail Light Bulbs will require the use of a Raxiom Modified Turn Signal Flasher for proper operation.

• Compatible with Raxiom Sequential Harnesses
• DOT Compliant Under Compliance# QR1300191
• Provides Additional Safety
• Aggressive Smoked Lenses
• Modern LED Technology
• Sold as a Set of Two
• Bold Iconic Styling

This Part Fits:

Comfort/Sport - Balances performance and fuel economy. Display is P1. Sport - Improves engine response for better performance during daily commuting. Display is P2. Race - Maximum performance with immediate throttle response. Display is P3. The Axial SpeedForm Series Throttle Response Controller connects directly into the stock throttle position sensor found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Throttle Response Controller is 100% reversible and will not leave residual codes on the factory PCM making it warranty friendly.

• Fits Ford F-150 Models Wihtout Factory HID Headlights
• Enhanced Brightness over OEM for Better Visibility
• Dual LED Light Bars with LED Accent Lighting
• Clear Lenses with Black Housings
• DOT and SAE Compliant

This Part Fits:

Improve the night time visibility of your 2015-2020 Ford F-150 in foul weather conditions by upgrading to a pair of Axial LED Fog Lights. Direct fit replacements for your factory fog lights, these Axial Fog Lights feature super bright LED technology to turn night into day. Manufactured from OEM grade materials, these Axial Fog Lights are assembled to precise standards for long lasting quality. These Fog Lights feature a die-cast aluminum housings with polycarbonate lenses. With a waterproof rating of IP 67, these Axial Lights can take what ever mother nature throws at them. The housings are completed in a textured black powder coat finish for aggressive good looks and long lasting corrosion resistance. These LED Fog Lights will not only bring a fresh new look to your F-150, but they also meet or exceed the strict guidelines set forth by the U.S. Department of Transportation (DOT) and the Society of Automotive Engineers (SAE), making them legal for street use. Axial designed their LED Fog Lights to be a direct plug and play upgrade for your F-150's original factory fog lights. There is no cutting or modifications required for a clean straight forward install. Installation can be completed in about an hours time with just basic hand tools. These Axial OE Style LED Fog Lights are designed to fit 2015-2020 Ford F-150 models, excluding the SVT Raptor. Driver and passenger side lights are included.

• Modern Electronics with Super Bright LED Technology
• Enhanced Brightness over OEM for Better Visibility
• Simple, Plug and Play Installation
• Black Housings with Clear Lenses
• OE Style LED Fog Light Kit
• DOT and SAE Compliant

This Part Fits:

A set of smoked Axial LED Mirror Lights are an excellent way to update the exterior styling of your Chevrolet/GMC Silverado/Sierra 1500. These Marker Lights feature four LED strips that replace the unsightly hot spot of the factory lights. These Axial Mirror Mounted LED Markers not only look fantastic, but they are also much brighter and more noticeable than the weak stock incandescent lights for increased visibility day or night. Raxiom manufactures its LED Mirror Lights with injected molded ABS plastic housings for durability, and use smoked lenses for stealthy good looks. These Marker Lights employee high output, amber SMD LED strip lighting for super bright illumination. Raxiom ensures that the housings are weather sealed to prevent dirt and moisture from harming the state of the art electronics found inside. Raxiom designed its LED Mirror Lights to be a direct plug and play upgrade for your Silverado/Sierra's original mirror mounted marker lights. There is absolutely no cutting, splicing or resistors required. Just pop out the old factory marker lights and disconnect the wiring harness. Plug the harness into the back of your new LED Mirror Lights and snap them in place of the old ones. It's just that simple!

• Mirror Mounted Marker Signals
• Driver and Passenger Included
• Durable ABS Plastic Housings
• Lighting Appearance Upgrade
• Plug and Play Installation
• Smoked Lenses
• SMD LEDs

This Part Fits:

A simple and effective way to upgrade the appearance and visibility of your Jeep Wrangler is with a pair of Axial LED Fog Lights that feature DRL Accent Bars. These Axial Fog Lights employee integrated dual bar lighting accents that function as a Day Time Running Lights (DRL). Featuring high output white LED lighting, these Axial Fog Lights will certainly be much brighter than your incandescent factory fog lights. Manufactured to perform in the harshest conditions, these Axial Fog Lights feature a rugged aluminum housing with a toughened glass lens. Each Fog Light is epoxy sealed to prevent moisture from harming the state of the art electronics found inside. These Axial LED Fog Lights have a lifespan of 50,000 hours and a IP65 rating making them perfect for use on dusty and wet trails. Raxiom designed their 4-inch LED Fog Lights to be a direct plug and play replacement for your JK's original factory fog lights. With the included wiring harness adapters, installation can be completed in under 1 hour. It should be noted that the DRL accent portion of the Fog Light will require splicing into your Jeeps side marker/running lights for operation. These Axial 4-inch Round LED Fog Lights will not only improve the appearance of your JK, but they also meet or exceed the strict guidelines set forth by the U.S. Department of transportation (DOT) and the Society of Automotive Engineers (SAE) making them DOT and SAE compliant.

• Work for JLs with Factory LED Fog Lights and Vehicles with Aftermarket Bumpers
• Clear Toughened Glass Lenses
• Waterproof Rating of IP 65
• High Intensity White LEDs

This Part Fits:

You won't ever have to worry about your headlights flickering by interference from the electrical currents on your 1997-2018 Jeep Wrangler. The 7" round Axial LED Chrome Daymaker Headlights feature a built-in EMC function so you won't need an extra decoder. This pair of high-powered headlights is designed to last while you're driving through dim-lit trails and roads. These LED Chrome Daymaker Headlights will illuminate the trails. Featuring 100% original high-performance CREE LED lamps with bright 6000K bulbs, these lights put out 3200-4500 lumens. The Daymaker lights have a voltage of DC 9-30V that's compatible with 45-Watt bulbs are sure to make your drive safer on the street or trails. Raxiom produces these LED Chrome Daymaker Headlights to handle the harshest conditions, particularly in the rain. These IP67 waterproof, shockproof and dustproof headlights are made with long-lasting chrome aluminum housings and durable lenses that will prevent moisture from damaging your electronics. Just like other plug-and-play lights, this pair of Daymaker Headlights is a quick replacement for your damaged or worn factory set. No modifications or cutting is required and both anti-flicker boxes are included as the total installation time will take approximately an hour to complete.

• Waterproof, Shockproof and Dustproof
• Durable Chrome Aluminum Housings
• High-Performance CREE LED Lamps
• Lenses are Sold as a Pair
• 6,000K Color Temperature
• Built-In EMC Function
• 3200-4500 Raw Lumens

This Part Fits:

Driving through low visible trails and roads with your 1997-2018 Jeep Wrangler just got much easier with this pair of Axial LED Black Daymaker Headlights. These high-powered, round 7" LED lights come with built-in EMC function for anti-flicker so you won't need an extra decoder to prevent interference from electrical currents. With over a 50,000-hour lifespan, this pair of rugged headlights is made to last while lighting your path. These bright Axial LED Black Daymaker Headlights feature 100% original high-performance CREE LED lamps that put out 3200-4500 raw lumens. Each bulb powered by DC 9-30V is 45 Watts with a 6000K color temperature made to illuminate the dark trails ahead of you. Raxiom designed these Black Daymaker Headlights to handle nearly any type of environment. This pair of IP67 waterproof, shockproof and dustproof headlights are constructed with black durable aluminum housings to prevent moisture, vibration and dust from damaging your electronics. Similar to other plug-and-play lights on the market, these LED Black Daymaker Headlights are made to be an easy replacement for your headlights. No cutting or modifications are needed and installation should take approximately 1 hour to complete. These aftermarket LED Headlights are intended for use with factory halogen headlight equipped models. In order to use these aftermarket LED Headlights on a Jeep that is already factory equipped with LED headlights, you will require a set of factory halogen headlight buckets – not included.

• LED Headlight Equipped Models require Halogen Headlight Buckets
• For use with Factory Halogen Headlight Models
• Waterproof/Shockproof/Dustproof
• Black Aluminum Housings
• Built-In EMC Function
• 3200-4500 Raw Lumens
• 6,000K Color Temp
• Clear Lenses

This Part Fits:

Your 1997-2018 Jeep Wrangler will truly stand out on the street with these state-of-the-art Axial LED Headlights with High and Low Beams. Featuring a longer beam distance, better visibility and reduced glare, your Wrangler's lights will have an outdoor look that fits the vehicle's rugged appearance. Raxiom designed the headlights with your safety in mind. With a bright, white 5600K light, each headlight puts out 40 Watts. These lights are the perfect replacement for your dim factory headlights. Crafted from high-quality materials. These IP67 waterproof Axial LED Headlights are made with tough black aluminum housing that will last you for an extended period of up to 15,000 hours. These Axial LED Headlights with High and Low Beams are made to be easily installed on your Wrangler. Made to be fully plug-and-play without any cutting or modifications, installation will take approximately 30 minutes. These aftermarket LED Headlights are intended for use with factory halogen headlight equipped models. In order to use these aftermarket LED Headlights on a Jeep that is already factory equipped with LED headlights, you will require a set of factory halogen headlight buckets – not included.

• LED Headlight Equipped Models will require Factory Halogen Headlight Buckets for Use
• Plug-and-Play Installation
• 5600K Color Temperature
• Black Aluminum Housing
• 15,000-Hour Lifespan
• High and Low Beams
• 40 Watts of Power
• Waterproof
• CREE LEDs

This Part Fits:

Upgrade the appearance and visibility of your Jeep Wrangler with a set of Axial LED Halo Headlights. These Axial Headlights feature a great looking integrated dual function accent halo. The halo functions as both a Day Time Running Light (DRL) and as a Turn Signal Indicator. The halo glows white as a DRL and amber when active as a turn signal. These Axial LED Headlights will certainly be much brighter than your stock headlights and feature a 6000K cool white color temperature. Featuring premium high output LEDs, these Axial Headlights out put 5400 lumens for the High Beams and 3600 lumens for the Low Beams. With a 60% lower power consumption than standard headlights, these LED Lights have a life span of up to 50,000 hours. Designed to perform in the harshest of elements, these Axial Headlights feature a rugged housing with a tough as nails clear polycarbonate lens. Each Headlight is epoxy sealed to prevent moisture from harming the state of the art electronics found inside. These Axial LED Headlights can take just about anything the trail can throw at them. With the included H4 - H13 wiring harness adapters (needed for 2007+ models) installation can be completed in under 30 minutes. It should be noted that the DRL/Turn Signal halo light will require additional wiring for operation. Installation instructions are included. These Axial 7-Inch Round LED Halo Headlights pass both DOT (U.S. Department of Transportation) certification and SAE (Society of Automotive Engineers) certification requirements making legal for street use. These aftermarket LED Headlights are intended for use with factory halogen headlight equipped models. In order to use these aftermarket LED Headlights on a Jeep that is already factory equipped with LED headlights, you will require a set of factory halogen headlight buckets – not included.

• LED Headlight Equipped Models will require Halogen Headlight Buckets
• Additional Wiring Required for DRL/Turn Signal Halo Lights
• 6000K Cool White Color Temperature Halo
• Clear Lenses with Black Housings
• DOT and SAE Certified

This Part Fits:

An excellent way to add a modern appearance to your 2008-2014 Dodge Challenger is by installing a set of Raxiom Smoked LED Tail Lights that feature sequential turn signals. With a unique race track inspired running light design, these Tail Lights will update the look your Dodge Challenger's rear end and will also ensure that you are clearly seen by distracted drivers when braking. Manufactured from OEM grade materials, these Raxiom Tail Lights are assembled to precise standards for long lasting quality. These Tail Lights feature durable, black plastic housings with smoked polycarbonate lenses. Employing red diffused LEDs for use as brake, running and turn signal lights, these Tail Lights use white diffused LEDs for the reverse lights. Each section of the Tail Light assembly is weather-sealed to prevent dirt and moisture from harming the state of the art electronics found inside. These Raxiom Smoked LED Tail Lights will not only bring a fresh new look to your Challenger, but they also meet or exceed the strict guidelines set forth by the U.S. Department of Transportation (DOT) and the Society of Automotive Engineers (SAE), making them legal for street use. Raxiom designed their LED Tail Lights to be a direct plug and play replacement for your Challenger's original factory housings. There is no cutting or modifications required for a clean straight forward install. Installation can be completed in about 45 minutes with just basic hand tools.

• Brighter than OEM for Additional Safety
• Sequential Turn Signal Indicators
• Easy Plug and Play Installation
• Unique Running Light Design
• Super Bright LED Technology
• Smoked Polycarbonate Lenses
• Black ABS Plastic Housings
• DOT and SAE Compliant

This Part Fits:

These Raxiom Gen5 Tail Lights feature built-in sequentials, modern LED technology and aggressively smoked lenses to transform the appearance of your 2005-2009 Mustang. When activated the turn signals or hazard lights will sequence from the center light out and repeat until switched off. When the brakes are applied, the tail lights will sequence once and then stay lit during braking. Raxiom Gen5 LED Tail Lights are assembled from state of the art electronic components with a simple plug-in connector that easily inserts into the stock wiring harness for a straight forward installation. Replace those weak factory bulbs with numerous high intensity LED's that illuminate quicker and brighter than standard incandescent bulbs with a set of Raxiom Gen5 LED Tail Lights to improve your driving safety. Raxiom Gen5 LED Tail Lights not only improve the appearance of your Mustang, but they also meet or exceed the strict guidelines set forth by the U.S. Department of transportation (DOT) making them DOT compliant under compliance# QR1200176. This is a product designed for Mustangs sold in the US. It will not function properly on Mustangs sold in the EU or UK without modifications being made to the wiring harness. Also, these Tail Light are not compatible with Tail Light Trim.

• DOT Compliant Under Compliance# QR1200176
• Built-In Sequential Turn Signals
• Provides Additional Safety
• Aggressive Smoked Lenses
• Modern LED Technology
• Sold as a Set of Two

This Part Fits:

Add some classic Shelby inspired style to your SN95 or New Edge Mustang quickly and easily with a set of Raxiom Plug-In Sequential Tail Lights. Used on Shelby Mustangs from 1968 to 1970, your modern pony will get a head-turning retro look with this easy to install and great looking upgrade. When activated the turn signals or hazard lights will sequence from the center light out and repeat until switched off. When the brakes are applied, the tail lights will sequence once and then stay lit during braking. The Raxiom Mustang Sequential Tail Lights Kit is assembled from state of the art electronic components. The kit includes two plug-in sequential units, one for the drivers side and one for the passenger side. The Raxiom Mustang Sequential Tail Lights Kit is a direct plug-in replacement for the factory wiring harness. Simply reuse your stock bulbs for the brake light sockets and for the reverse. It's that easy. If you would like a slower speed for the sequence of your tail lights to get that classic muscle car styling, combine this sequential tail light kit with the turn signal flasher seen above in the drop down menu. These Sequential Tail Lights will not work with LED replacement taillights or on SVT Cobras with the rear amber turn signals.

• Easy Plug-In Installation
• Exceptional Electronics
• Cool Retro Styling

This Part Fits:

Give your 2005-2009 GT or V6 Mustang a new look with a set of Raxiom Smoked Projector headlights that feature LED Halos. These Smoked Raxiom Mustang Projector Headlights have an aggressive design that flows nicely into the lines of the S197 Mustangs. The projector lenses light up the road ahead with a bright focused beam of light that not only looks great, but improves your night visibility. The LED Halo and accent lights give an exotic flair to your Mustang that sets it apart from the rest of the herd. Equipped with H1 and H7 bulbs for high/low beams this pair of Smoked Mustang Headlights are DOT (Department of Transportation) approved for legal street use under compliance # QR1200190. These One Piece Projector Headlights include H7 bulbs for low beams and H1 bulbs for their high beams. Not intended for use with vehicles equipped with Daytime Running Lights or Aftermarket HID Kits.

• DOT Approved Under Compliance# QR1200197
• LED Halo and Accent Lighting
• Sold as a Set of Two Pieces
• Projector Style Light
• Aggressive Design
• Black Housings
• Smoked Lenses

This Part Fits:

These black Axial Mustang Headlights feature a factory style two piece housing design that fits perfectly into the stock location for great classic styling. Now you can improve your night visibility just by replacing your old weathered and worn out stock headlights with a brand new set of crystal clear headlights.Equipped with dual element 9007 bulbs for high/low beams this pair of Mustang Headlights are DOT (Department of Transportation) approved for legal street use under compliance # QR1300003.

• DOT Approved Under Compliance# QR1300003Includes Both Headlights and Side Markers
• Classic Four-Piece Design
• Improves Visibility
• Black Housings

This Part Fits:

Now you can restore your 2003-2004 SVT Cobra back to its original showroom condition by replacing that scratched, cracked or malfunctioning factory third brake light with an Axial OEM Style Replacement Third Brake Light. Manufactured from OEM grade materials, this third brake light is assembled to precise standards for long-lasting quality. This third brake light features a durable, black abs plastic housing, a smoked red polycarbonate lens and modern LED lighting. The housing is weather-sealed to prevent dirt and moisture from harming the state of the art electronics. This Axial Third Brake Light is designed to be a direct plug and play upgrade for your original factory third brake light. Installation can normally be completed in about 20 minutes.

• OEM Style LED Third Brake Light
• Smoked Red Polycarbonate Lens
• Black ABS Plastic Housings
• Plug and Play Installation
• DOT and SAE Compliant

This Part Fits:

Upgrade the exterior styling of your 2015-2023 S550 Mustang with a pair of Axial Clear LED Side Marker Lights. These Side Marker Lights feature a razor sharp LED strip that replaces the unsightly hot spot of the factory lights. These Axial Side Marker Lights not only look great, but they are also much brighter than the weak factory incandescent lights for increased visibility day or night. Raxiom manufactures their Rear Side Marker Lights with injected molded ABS plastic housings for durability, and clear lenses for exotic good looks. These Side Marker employee high output, red, LED strip lighting for super bright illumination. Raxiom ensures that their Side Marker Light housings are weather sealed to prevent dirt and moisture from harming the state of the art electronics found inside. Raxiom designed their LED Side Marker Lights to be a direct plug and play upgrade for your Mustang's original factory lights. There is absolutely no cutting, splicing or resistors required. Just pop out the old factory side markers and disconnect the wiring harness. Plug the harness into the back of your new LED Side Markers and snap them in place of the old ones. It's that simple!

• Driver and Passenger Rear Side Markers Included
• Durable ABS Plastic Housings
• Lighting Appearance Upgrade
• Plug and Play Installation
• Super Bright LED Strip
• Clear Lenses

This Part Fits:

Add an intimidating appearance to the rear of your S197 Mustang with an Axial Smoked LED Third Brake Light. This Smoked Third Brake Light not only adds great aggressive styling to your Pony, but it also adds an extra level of safety with its row of 16 bright red LEDs. This Axial Smoked LED Third Brake Light will be sure to catch the attention of distracted drivers when you hit the brakes. Raxiom manufactures their Third Brake Light from OEM grade materials to precise standards for lasting quality. This Third Brake Light features a durable chromed plastic housing with a smoked lens and 16 super bright red LEDs. The housing is weather-sealed to prevent dirt and moisture from harming the state of the art electronics found inside. Raxiom engineered their Smoked LED Third Brake Light to be a direct plug and play replacement for your Mustang's original stock Third Brake light. With the included wiring harness adapter installation can be completed in under 15 minutes.

• Smoked Lens with Chrome Housing
• Simple Plug-n-Play Installation
• Improves Visibility and Safety
• Super Bright LED Technology
• Aggressive Styling

This Part Fits:

Everyone loves the stock Sequential Tail Lights of the 2010+ Mustangs. They look fantastic, however the one minor issue is that they only sequence when used as turn signals. But Raxiom has solved this problem with their Plug-and-Play Tail Light Sequencer to add additional sequential modes. When activated the turn signals or hazard lights will sequence from the center light out and repeat until switched off. When the car is locked/unlocked or when the brakes are applied, the tail lights will sequence once and then stay lit during braking. The Raxiom Sequential Tail Light Harness Kit is assembled from state of the art electronic components with a simple plug-in connector that easily insert into the stock wiring harness. This kit includes two inline unit harnesses, one for each side, that replace your factory harness. The Raxiom Mustang Sequential Tail Light Harness Kit is a direct plug-in replacement for the stock wiring harness. Simply unplug the stock harness and plug in the new Raxiom sequential harness in it's place, it is that easy. PLEASE NOTE, this is a product designed for Mustangs sold in the US. It will not function properly on Mustangs sold in the EU or UK without modifications being made to the wiring harness.

• Adds Sequentials to Hazard, Brake, and Lock/Unlock ModeExceptional Electronics
• Upgrades Stock Factory Tail Lights
• Easy Plug-N-Play Installation
• Fits US Spec Tail Lights Only

This Part Fits: