Maintain the integrity of your vehicle's lighting system with the Raxiom Axial Series Rear Turn Signal. This component is engineered specifically as a replacement kit part, ensuring a seamless fit and consistent light output when repairing or refreshing your existing Axial Series lighting setup. It restores the critical signaling functionality required for safety and predictable communication with other drivers on the road.

• Authentic Raxiom Axial Series replacement component
• Direct fit for Axial Series rear lighting kits
• Designed to match original kit specifications for brightness and color
• Durable construction to withstand vibration and environmental exposure

Fits 2015-2018 Ford F-150 models including King Ranch, Lariat, Limited, Platinum, Raptor, XL, and XLT equipped with factory mirror-mounted turn signals.

Upgrade the lighting performance and exterior styling of your truck with the Raxiom Axial Series Sequential LED Side Mirror Marker Lights. These units replace the dim, single-bulb factory incandescent markers with high-output amber SMD LED strips. The sequential firing pattern provides a fluid lighting motion that eliminates the unsightly "hot spots" of OE lights while significantly increasing visibility to other drivers in day or night conditions.

Built for durability in all environments, these lights feature injection-molded ABS plastic housings and impact-resistant smoked lenses. Each housing is fully weather-sealed to prevent moisture, dirt, and debris from affecting the internal circuitry. Installation is a direct plug-and-play procedure using the factory wiring harness; no resistors, cutting, or splicing are required for operation.

• High-output amber SMD LED sequential lighting
• Durable injection-molded ABS plastic housings
• Impact-resistant smoked lenses for a sleek finish
• Weather-sealed construction for moisture protection
• Direct plug-and-play installation with OE connectors
• Includes driver and passenger side marker lights
• Manufacturer Part Number: T544264

Fits select 1987-2012 Ford Mustang models, including LX, GT, SVT Cobra, Mach 1, Bullitt, and Shelby GT500.

Modernize your Mustang's exterior lighting with the Raxiom Axial Series Amber LED Turn Signal Conversion Kit. This kit replaces dim, factory-original incandescent bulbs with high-intensity LEDs to improve both vehicle visibility and response time for trailing drivers. Each bulb utilizes 18 high-output 3-chip 5050 SMD (Surface Mount Device) LEDs to provide a crisp, bright amber light while consuming only 1/10th of the power of a standard OE bulb.

Designed for long-term reliability and a direct-fit installation, these bulbs utilize a standard T1 style wedge base to plug directly into your factory harness. With a continuous-use rating of 100,000 hours, this kit is built to outlast the vehicle while providing a sharper, more distinct signal than halogen alternatives.

• Manufacturer Part Number: 49216
• Technology: 18-LED 3-chip 5050 SMD
• Color: Bright Amber
• Base Type: T1 Style Wedge
• Lifespan: Rated at 100,000 hours
• Power Efficiency: Uses 90% less power than incandescent bulbs
• Included: Two (2) LED turn signal bulbs

Improve your vehicle's side-profile visibility with the Raxiom Axial Series 3/4-Inch LED Marker Light. This high-intensity light is designed for universal mounting, providing a clear amber signal to other drivers in both day and night conditions. Built with a durable amber polycarbonate lens and a silicone rubber grommet, this unit is sealed against dirt and moisture for long-lasting performance in harsh environments.

Installation is straightforward, requiring a 3/4-inch mounting hole. Each light features a small pigtail connector, allowing for integration into your existing electrical system via minor wiring. Whether you are adding clearance lights to a trailer or supplemental indicators to an off-road rig, these Axial Series LEDs provide a modern, low-profile lighting solution.

• Manufacturer Part Number: U9913
• Diameter: 0.75-inch (3/4")
• Light Color: Amber
• Lens Material: Impact-resistant polycarbonate
• Housing: Silicone rubber grommet for weather sealing
• Wiring: Integrated pigtail connector (requires minor wiring)
• Sold individually

Increase vehicle presence and safety with the Raxiom Axial Series Universal LED Roof Cab Marker Lights. This universal set of five lights is engineered to improve nighttime and low-visibility awareness for surrounding drivers. Featuring high-output LED technology and durable smoked lenses, these lights provide a modern appearance while ensuring clear signaling in rain, snow, or fog.

Manufactured from OEM-grade materials to precise tolerances, these marker lights are weather-sealed to protect sensitive internal electronics from moisture, dust, and debris. As a universal-fit component, they are designed to mount to the roof of various truck platforms; however, vehicle-specific adaptation or drilling may be required for a flush installation.

• Quantity: Set of five (5) cab marker lights
• Lighting Type: High-intensity LED technology
• Lens Finish: Smoked polycarbonate
• Construction: Weather-sealed housing for long-term durability
• Installation: Splice-in wiring required (includes Scotchlok connectors and an on/off rocker switch)
• Mounting: Designed for hardware or 3M automotive bonding tape (not included)
• MPN: T569856

Fits 2009-2014 Ford F-150 models including STX, SVT Raptor, XL, XLT, FX2, FX4, Lariat, King Ranch, Platinum, and Limited.

Modernize your truck’s exterior lighting with Raxiom Axial Series White LED Mirror Turn Signals. These units replace factory signals with high-intensity white LEDs, providing a cleaner, more contemporary look. Constructed with durable black ABS plastic housings and clear polycarbonate lenses, these signals are built to resist yellowing and impact damage while maintaining a precise OE-style fit.

Installation is designed for a straightforward, plug-and-play process. These signals connect directly to your F-150’s factory wiring harness without the need for cutting, splicing, or complex modifications. Each housing is weather-sealed to protect the internal electronics from moisture, dirt, and road debris, ensuring reliable performance in harsh environments.

• High-intensity white LED technology for improved visibility and modern styling
• Durable black ABS plastic housings with clear polycarbonate lenses
• Direct plug-and-play replacement; no wiring modifications required
• Weather-sealed design to prevent moisture and dust intrusion
• Sold as a pair (includes driver and passenger side)
• Manufacturer Part Number: T556985

Fits 2004-2014 Ford F-150 models including XL, XLT, STX, FX2, FX4, Lariat, King Ranch, Platinum, and SVT Raptor.

Replace your weak factory lower mirror lights with the Raxiom Axial Series Sequential Side Mirror LED Turn Signals. These units feature high-intensity amber LEDs with a modern sequential firing pattern, significantly increasing visibility to other drivers while updating your truck's exterior styling with a sleek smoked lens finish.

Built to precise standards from OEM-grade materials, these lights utilize durable plastic housings that are weather-sealed to protect internal electronics from moisture, dirt, and road debris. Designed as a direct-fit replacement for factory rear-facing mirror signals, this set includes adapter harnesses for a straightforward plug-and-play installation without the need for custom wiring.

• Modern sequential amber LED operation
• Aggressive smoked lens finish
• Durable weather-sealed housings
• DOT and SAE compliant
• Plug-and-play installation with included adapter harnesses
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: T545498

Fits select 2009-2014 Ford F-150 models including STX, XL, XLT, FX2, FX4, SVT Raptor, Lariat, King Ranch, Platinum, and Limited.

Modernize your truck’s exterior with the Raxiom Axial Series Sequential LED Mirror Mounted Turn Signals. These units replace the dim, dated factory incandescent bulbs with high-output amber SMD LED strips. The sequential lighting pattern provides a fluid motion that eliminates the unsightly "hot spot" found in stock housings, significantly increasing visibility for other drivers during the day or night.

Built for the rigors of daily driving, Raxiom manufactures these signals using durable injection-molded ABS plastic housings and aggressive smoked lenses. Each housing is weather-sealed to protect the internal electronics from dust, dirt, and moisture intrusion. Installation is a direct plug-and-play upgrade; these markers snap into the factory mirror mounting points and connect to the OEM harness without the need for cutting, splicing, or load resistors.

• Amber SMD LED strip lighting
• Sequential light sequence for improved styling and visibility
• Smoked polycarbonate lenses for a blacked-out appearance
• Injection-molded ABS plastic housings
• Weather-sealed for long-term durability
• Simple plug-and-play installation
• Includes both driver and passenger side markers
• Manufacturer Part Number: T544359

Fits 2011-2016 Ford F-250 and F-350 Super Duty models including XL, XLT, Lariat, King Ranch, and Platinum trims.

Modernize the lighting profile of your Super Duty with Raxiom Axial Sequential Switchback LED Mirror Marker Lamps. These units replace the dim factory incandescent bulbs and "hot spot" lenses with a high-output LED strip that provides uniform illumination. Featuring a switchback function, these lamps operate as white running lights and transition to a sequential amber pattern when the turn signals are activated, significantly increasing vehicle visibility for oncoming traffic.

Built for the rigors of heavy-duty use, Raxiom constructs these marker lamps using injection-molded ABS plastic housings and clear polycarbonate lenses. The electronics are fully weather-sealed to prevent moisture intrusion and corrosion. Installation is a straightforward plug-and-play process; the housings snap into the factory mounting points and connect directly to the OEM wiring harness without the need for cutting, splicing, or load resistors.

• Direct replacement for factory mirror-mounted marker lights
• Sequential amber turn signal and white running light functionality
• Clear polycarbonate lenses with durable ABS housings
• DOT and SAE compliant for street use
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: SD18247

Fits 2011-2016 Ford F-250 and F-350 Super Duty models including King Ranch, Lariat, Platinum, XL, and XLT.

Upgrade the exterior lighting of your Super Duty with Raxiom Axial Series LED Switchback Side Mirror Marker Lamps. These lamps replace the factory incandescent units with high-output LED strips, eliminating the uneven "hot spots" found in OE lighting. Designed with a dual-color switchback function, these markers provide crisp illumination for both running lights and turn signal indicators, significantly increasing vehicle visibility during day and night operation.

Built for the demands of heavy-duty use, these marker lamps feature durable injection-molded ABS plastic housings and clear polycarbonate lenses. Each unit is weather-sealed to protect the internal electronics from moisture, dust, and road debris. Installation is a straightforward plug-and-play process; Raxiom engineered these to connect directly to your factory wiring harness without the need for cutting, splicing, or external resistors.

• Forward-facing mirror-mounted turn signals
• High-output amber and white switchback LED technology
• Durable injection-molded ABS housings
• Impact-resistant clear polycarbonate lenses
• Weather-sealed for long-term reliability
• Direct plug-and-play installation
• DOT and SAE compliant
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: SD18246

Fits 2019-2025 Ram 1500 models including TRX, Rebel, Laramie, and Tradesman.

Enhance your truck's exterior styling and visibility with the Raxiom Axial Series Sequential LED Mirror Turn Signal Markers. These lights replace the standard factory mirror markers, substituting the dated incandescent "hot spot" with a modern, fluid sequential amber LED strip. The smoked lenses provide a sleek, aggressive look while the high-output SMD LEDs ensure you are clearly seen by other drivers, day or night.

Engineered for durability and longevity, these markers feature injection-molded ABS plastic housings and are fully weather-sealed to protect the internal electronics from moisture, dust, and debris. Installation is a straightforward plug-and-play process; the units snap directly into the factory mounting points and connect to the OEM wiring harness without any cutting, splicing, or additional resistors required.

• Amber SMD LED sequential lighting
• Durable injection-molded ABS plastic housings
• Aggressive smoked lens finish
• Weather-sealed for environmental protection
• Direct plug-and-play installation
• Includes driver and passenger side markers
• Manufacturer Part Number: R137156

Fits 2019-2025 Ram 1500 models including Big Horn, Laramie, Rebel, TRX, and Tradesman.

The Raxiom Axial Series Sequential LED Mirror Mounted Turn Signal Markers are designed to modernize the exterior lighting of your Ram 1500. Replacing the dim, incandescent factory bulbs that create localized hot spots, these markers utilize a high-output amber SMD LED strip for a smooth, fluid sequential lighting effect. This upgrade significantly increases visibility for surrounding traffic during day or night operations.

Constructed for durability and weather resistance, these lights feature injection-molded ABS plastic housings and clear lenses. Every unit is weather-sealed to protect the internal SMD electronics from moisture, dust, and road debris. Installation is a straightforward plug-and-play process; the housings snap directly into the factory mounting points and connect to the OE wiring harness without any cutting, splicing, or additional resistors required.

• Manufacturer Part Number: R137155
• Includes both driver and passenger side markers
• High-output amber SMD LED sequential strips
• Injection-molded ABS plastic housings
• Weather-sealed electronics for long-term reliability
• Direct plug-and-play installation into factory harness

Fits select 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Rubicon, Sahara, Sport, X, and Special Editions).

The Raxiom Axial Series Replacement Turn Signal Lamps provide a direct-fit solution for replacing cracked, faded, or moisture-damaged factory lighting on your Jeep. These lamps maintain an OE-style aesthetic while utilizing black ABS plastic housings and multi-faceted amber polycarbonate lenses to ensure consistent visibility and a clean front-end appearance.

Built to meet or exceed OEM standards, these housings are fully weather-sealed to protect against dirt, dust, and moisture intrusion that often leads to electrical failure. Installation is straightforward and requires no modifications, as these lamps are designed to be a direct plug-and-play replacement that reuses your vehicle's factory bulbs and sockets.

• Manufacturer Part Number: J150569
• OE-Style Design: Direct replacement for factory front turn signal housings.
• Durable Construction: High-impact black ABS plastic housings with amber polycarbonate lenses.
• Weather-Sealed: Protected against environmental elements and trail debris.
• Installation: Simple plug-and-play fitment; reuses existing factory bulbs.
• Quantity: Sold as a pair (includes driver and passenger side).

Fits 2007-2018 Jeep Wrangler JK models including Rubicon, Sahara, Sport, and X.

Restore the clean, factory look of your vehicle with the Raxiom Axial Series Fender Marker Lights. These OE-style replacements solve the problem of cracked, faded, or missing factory units. Specifically engineered for the JK platform, these lights provide a reliable, weather-sealed solution to ensure your side markers remain visible and functional in all conditions.

Constructed from OEM-grade materials, these lights feature durable black ABS plastic housings paired with impact-resistant amber polycarbonate lenses. Each unit is assembled to precise tolerances and weather-sealed to prevent moisture and road debris from compromising the electronics. The direct plug-and-play design allows for a straightforward installation in under 30 minutes using basic hand tools, with no cutting or modifications to your factory wiring required.

• Direct plug-and-play installation for a clean factory fit
• Durable black ABS plastic housings
• Impact-resistant amber polycarbonate lenses
• Weather-sealed to protect against dirt and moisture intrusion
• Sold as a pair (includes driver and passenger side)
• Manufacturer Part Number: J150568

Fits 2007-2018 Jeep Wrangler JK including Rubicon, Sahara, Sport, and X models.

Replace your dull factory lighting with the Raxiom Axial Series LED Turn Signals. These units provide a sharp, modern appearance for your Wrangler while significantly improving visibility with high-intensity amber LEDs. Designed for the enthusiast who demands both style and durability, these lights feature robust black ABS plastic housings and smoked polycarbonate lenses that stand up to trail debris and harsh environments.

• Direct plug-and-play installation; no cutting or splicing required
• High-intensity amber LED technology for increased safety
• Weather-sealed housing prevents moisture and dust intrusion
• Impact-resistant black ABS plastic and smoked polycarbonate construction
• Includes both driver and passenger side assemblies
• Easy installation takes approximately 1 hour with basic hand tools
• Manufacturer Part Number: J142671

Fits select 2018-2025 Jeep Wrangler (JL) models including Sport, Sport S, Sahara, Rubicon, Willys, and 4xe.

Replace the dim, dated look of factory incandescent side markers with the Raxiom Axial Series LED Fender Flare Marker Lights. These units feature two sharp, high-output amber SMD LED strips per housing, providing superior illumination compared to standard bulbs while eliminating the unattractive "hot spot" found in OE assemblies. The clear lenses offer a modern, exotic aesthetic that complements any body color.

• High-Performance Lighting: Equipped with amber SMD LED strip lighting for crisp, high-visibility output day or night.
• Durable Build: Injection-molded ABS plastic housings are precision-engineered for long-term durability and impact resistance.
• Weather Sealed: Rated at IP67 for dust and water resistance, ensuring electronics remain protected against mud, dirt, and moisture.
• Simple Installation: Direct plug-and-play design connects directly to the factory wiring harness with no cutting, splicing, or load resistors required.
• What's Included: One pair of front side marker lights (driver and passenger side).
• MPN: J134142-JL

Fits all 2007-2018 Jeep Wrangler JK models, including Rubicon, Sahara, Sport, X, and Unlimited trims.

Upgrade your JK's visibility and style with the Raxiom Axial Series LED Side Marker Lights. These smoked-lens units are designed as a direct plug-and-play replacement for factory incandescent bulbs, offering a significantly brighter output that ensures your vehicle is seen in low-light or poor weather conditions. Each light is equipped with eight high-intensity amber LEDs housed in a weather-sealed enclosure to protect the internal electronics from moisture and trail debris.

• Fits 2007-2018 Jeep Wrangler JK (Full range)
• Direct plug-and-play installation—no cutting or splicing required
• Eight (8) high-output amber LEDs per light
• Durable smoked polycarbonate lenses
• Weather-sealed housing prevents moisture and dirt intrusion
• Sold as a pair (Includes driver and passenger side)
• Manufacturer Part Number: J119945

Fits 2007-2018 Jeep Wrangler JK (Rubicon, Sahara, Sport, Unlimited, and X).

Replace dim, slow-responding factory incandescent bulbs with the Raxiom Axial Series Smoked LED Amber Turn Signals. These high-output LED assemblies offer a significant brightness upgrade and a faster on/off response time, improving driver communication and safety on the road or the trail. The sleek smoked lenses provide a modern, stealthy aesthetic that integrates seamlessly with your JK's front end.

Built for the demands of off-roading, these units feature durable black ABS plastic housings and high-quality internal electronics. Operating at 12V DC with a 4-watt draw, they produce a rich 2000K amber light. Designed as a direct-fit replacement, the plug-and-play connectors allow for a straightforward installation using basic hand tools in approximately one hour.

• Manufacturer Part Number: J108040
• Voltage: 12V DC
• Power Output: 4 Watts
• Color Temperature: 2000K Amber
• Lens Finish: Smoked
• Housing Material: Lightweight Black ABS Plastic
• Installation: Plug-and-Play OEM replacement
• Quantity: Sold as a pair (Driver and Passenger side)

Fits 2014-2019 Chevrolet Corvette C7 Stingray, Z06, Grand Sport, and ZR1 models.

Replace the factory incandescent bulbs and dated lens design of your Corvette with the Raxiom Axial Series Smoked LED Side Marker Lights. These markers feature high-output SMD LED strips that provide a sharp, continuous line of light, eliminating the uneven "hot spot" illumination found in original equipment housings. The set includes amber LEDs for the front and red LEDs for the rear, significantly increasing visibility for safer operation in low-light conditions.

Built for durability and long-term performance, these side markers utilize injection-molded ABS plastic housings and smoked polycarbonate lenses for a modern, aggressive look. The internal electronics are fully weather-sealed to prevent moisture and debris from entering the housing. Installation is a straightforward plug-and-play process; these units snap directly into the factory mounting points and connect to the OE wiring harness without the need for cutting, splicing, or external load resistors.

• Complete set includes front (amber) and rear (red) side markers
• High-intensity SMD LED strip lighting
• Durable ABS plastic housings with smoked polycarbonate lenses
• Weather-sealed construction for electronic protection
• Direct plug-and-play replacement for factory housings
• Manufacturer Part Number: CV4602

Fits 2015-2023 Dodge Charger models (Excluding Widebody).

Upgrade the lighting profile of your 2015-2023 Dodge Charger with Raxiom Axial LED Side Marker Lights. These smoked units replace the dim, dated factory incandescent bulbs with high-intensity SMD LED strips, providing a modern, linear light output without unsightly hot spots. The result is significantly increased visibility and a custom, aggressive exterior aesthetic.

Engineered for durability and precision fitment, these markers feature injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. Each housing is fully weather-sealed to protect the high-output electronics from moisture, dirt, and road debris. Installation is a direct plug-and-play process that utilizes the factory wiring harness, requiring no cutting, splicing, or resistors.

• High-output amber (front) and red (rear) SMD LED strips
• Aggressive smoked polycarbonate lenses
• Durable injection-molded ABS plastic housings
• Fully weather-sealed electronics
• Direct plug-and-play installation; no resistors required
• Complete set of 4 (Front and Rear)
• Manufacturer Part Number: CR5949

Fits 2018-2023 Dodge Challenger Widebody, SRT Hellcat, Demon, and Scat Pack models.

Upgrade the factory lighting on your widebody Mopar with the Raxiom Axial Series LED Side Marker Lights. These smoked-lens units replace the standard incandescent bulbs and dated "hot spot" optics with crisp, high-output SMD LED strips. The front markers illuminate in vibrant amber, while the rear units glow deep red, providing significantly improved visibility and a modern, aggressive profile day or night.

Engineered for durability, Raxiom utilizes injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. The housings are fully weather-sealed to protect the internal electronics from moisture, dust, and road debris. Installation is a straightforward plug-and-play process; these markers snap directly into the factory mounting points and connect to the OE wiring harness without the need for cutting, splicing, or external load resistors.

• High-output Amber (Front) and Red (Rear) SMD LED strips
• Aggressive smoked polycarbonate lenses
• Durable injection-molded ABS housings
• Weather-sealed protection for internal circuitry
• Direct plug-and-play installation into factory harness
• Complete set of 4 (front and rear)
• Manufacturer Part Number: CH15223

Fits 2016-2024 Chevrolet Camaro LS, LT, LT1, SS, and ZL1 models.

Replace the dated, incandescent factory lighting on your Gen 6 Camaro with Raxiom Axial Series LED Side Markers. This complete set of front and rear markers features high-output SMD LED strips that provide a continuous, razor-sharp light beam, eliminating the dim "hot spots" associated with original equipment bulbs. The amber front and red rear LEDs significantly increase vehicle visibility during day and night operation.

Built for the rigors of daily driving, these units feature durable injection-molded ABS plastic housings and smoked polycarbonate lenses. Each housing is precision weather-sealed to protect the internal electronics from moisture, dust, and road debris. Installation is a straightforward bolt-on process; the plug-and-play design connects directly to your factory wiring harness without the need for cutting, splicing, or load resistors.

• Includes front (amber) and rear (red) side marker assemblies
• High-output SMD LED strip technology
• Aggressive smoked polycarbonate lenses
• Durable injection-molded ABS housings
• Weather-sealed for environmental protection
• Direct plug-and-play installation into factory harnesses
• Manufacturer Part Number: CC2934

Fits 2005-2009 Ford Mustang Base, Bullitt, GT, and Shelby models.

Update the exterior styling and lighting performance of your S197 with the Raxiom Axial Series LED Rear Side Marker Lamps. These units replace the factory incandescent housings, which often suffer from uneven light distribution, with a continuous, razor-sharp red SMD LED strip. This high-output lighting solution provides significantly better visibility and a modern aesthetic compared to weak stock bulbs.

• Durable Construction: Manufactured with injection-molded ABS plastic housings and impact-resistant red polycarbonate lenses for long-term durability.
• Weather Sealed: The housings are fully weather-sealed to prevent moisture, dirt, and debris from damaging the internal electronics.
• Direct Plug-and-Play: Engineered as a straightforward upgrade that requires no cutting, splicing, or resistors. Simply pop out the factory markers and connect the new units to the existing wiring harness.
• Included Hardware: Includes both driver and passenger side rear marker assemblies.

Technical Specifications:
Manufacturer Part Number: 431424
Light Source: Red SMD LED Strip
Housing Material: ABS Plastic
Lens Material: Red Polycarbonate
Installation: Plug-and-Play

Fits 2010-2014 Ford Mustang Base, Boss 302, GT, and Shelby GT500.

Modernize the exterior lighting on your S197 with the Raxiom Axial Series Smoked LED Side Marker Lights. This complete set replaces the dated, dim incandescent factory housings with razor-sharp SMD LED strips. The high-output red (rear) and amber (front) LEDs provide a continuous light bar appearance that eliminates hot spots and significantly improves visibility during day or night driving.

Built for durability, Raxiom utilizes injection-molded ABS plastic for the housings and impact-resistant smoked polycarbonate for the lenses. Each unit is fully weather-sealed to protect the internal electronics from moisture, dust, and road debris. Installation is a straightforward, direct-fit process—these markers plug directly into your factory wiring harness without any cutting, splicing, or external resistors required.

• Complete front and rear set (4 pieces)
• Aggressive smoked polycarbonate lenses
• High-output amber (front) and red (rear) SMD LED strips
• Durable injection-molded ABS plastic housings
• Weather-sealed for long-term reliability
• Direct plug-and-play installation; no resistors needed
• Manufacturer Part Number: 412496

Fits all 1999-2004 Ford Mustang models, including Base, GT, Bullitt, Mach 1, and SVT Cobra.

Raxiom Axial Series Smoked LED Rear Side Marker Lights (MPN 408818) provide a modern lighting and styling upgrade over the dim factory incandescent units. These markers feature high-output red SMD LED strips that deliver a continuous, sharp light pattern, eliminating the single "hot spot" found in original equipment. The aggressive smoked polycarbonate lenses are paired with durable injection-molded ABS plastic housings, which are weather-sealed to protect the internal electronics from moisture and road debris.

Installation is a straightforward direct-fit process. These markers are designed to plug into the factory wiring harness and snap into the stock mounting locations using the included Scotchlok connectors, requiring no permanent modifications to your Mustang.

• Includes driver and passenger side rear markers
• High-output red SMD LED strip lighting for increased visibility
• Aggressive smoked polycarbonate lenses
• Durable, weather-sealed ABS plastic housings
• Direct-fit installation with included Scotchlok connectors
• Manufacturer Part Number: 408818

Fits select 2005-2009 Ford Mustang models including Base, Bullitt, GT, Shelby GT, GT500, and GT500KR.

Modernize the exterior lighting of your S197 Mustang with a pair of Raxiom Axial Series Smoked Rear LED Side Marker Lights. These units replace the dated factory incandescent bulbs and their localized "hot spot" illumination with a razor-sharp, high-output red SMD LED strip. This creates a clean, continuous lighting signature that significantly increases visibility during day or night driving.

Engineered for long-term durability, these side markers feature injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. The housings are fully weather-sealed to prevent moisture, dirt, and road debris from affecting the internal electronics. Installation is a direct plug-and-play process that utilizes your Mustang's factory wiring harness, requiring no cutting, splicing, or additional load resistors.

• Series: Axial Series
• Lens Finish: Smoked Polycarbonate
• Housing Material: Injected Molded ABS Plastic
• Illumination: High-Output Red SMD LED Strip
• Installation: Direct Plug-and-Play
• Manufacturer Part Number: 406293

Fits 2015-2023 Ford Mustang models, including EcoBoost, GT, V6, Mach 1, Bullitt, and Shelby GT350/GT500.

Eliminate the dated, localized "hot spot" of factory incandescent bulbs with Raxiom Axial Series Rear LED Side Marker Lights. These units feature high-output red LED strips that provide continuous, razor-sharp illumination across the entire lens. This upgrade significantly increases visibility for following traffic while modernizing the rear profile of your S550 Mustang.

Built for the long haul, Raxiom manufactures these markers using durable injection-molded ABS plastic housings. The housings are fully weather-sealed to protect the internal electronics from moisture, dust, and road debris. The red lenses maintain a classic look while the modern LED technology delivers superior brightness over OE components.

• Plug-and-Play: Direct replacement for factory housings; plugs directly into the OEM wiring harness.
• High-Output LEDs: Bright red LED strips replace weak factory incandescent bulbs for improved visibility.
• Durable Construction: Injection-molded ABS plastic with weather-sealed electronics.
• Simple Installation: Snap-in fitment with no cutting, splicing, or resistors required.
• Complete Set: Includes both driver and passenger side rear marker lights.
• Manufacturer Part Number: 404232

Fits 2011-2016 Ford F-250 and F-350 Super Duty models.

Eliminate the dim, unsightly hot spots of your factory lighting with Raxiom Axial LED SEQL Sequential Switchback Side Mirror Marker Lamps. These high-output units modernize your truck's exterior while significantly improving side-profile visibility. Featuring an amber sequential turn signal and a crisp white running light function, these switchback markers offer a distinct visual upgrade over stock incandescent bulbs.

Engineered for durability in heavy-duty environments, these marker lamps are constructed with injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. Raxiom weather-seals every unit to protect the internal electronics from moisture, dust, and vibration. The direct plug-and-play design allows for a seamless installation into factory mounting points using the original wiring harness—no resistors, cutting, or splicing required.

• Sold as a pair (includes driver and passenger side)
• Sequential amber LED turn signal functionality
• Dual-color amber/white switchback illumination
• Injected-molded ABS plastic housings for superior durability
• Weather-sealed smoked polycarbonate lenses
• Direct plug-and-play installation into factory harness
• Manufacturer Part Number: SD18249

Fits 1997-2006 Jeep Wrangler TJ models, including SE, Sport, Sahara, X, Rubicon, and Unlimited.

Upgrade the lighting performance and exterior styling of your Wrangler with the Raxiom Axial Series Smoked LED Side Marker Lamps. These lamps replace the standard incandescent factory units with high-output amber SMD LED strips, providing a modern look and significantly brighter illumination for better visibility on and off the road. The three-row LED configuration eliminates the unsightly hot spots found in OE lighting for a sharp, uniform appearance.

• High-intensity amber SMD LED strips for a crisp, even light output
• Smoked polycarbonate lenses for a sleek, aggressive appearance
• Durable, injection-molded ABS plastic housings for long-term reliability
• Weather-sealed construction to prevent moisture and dirt ingress
• Direct plug-and-play installation with no cutting, splicing, or resistors required
• Complete set includes driver and passenger side front markers
• Manufacturer Part Number: J166834

Fits 2015-2017 Ford Mustang EcoBoost, GT, V6, and Shelby GT350/GT350R models.

Upgrade the front-end aesthetics and lighting performance of your S550 with the Raxiom Axial Series LED Sequential Turn Signals. These units replace the factory incandescent turn signal housings with high-output LEDs for superior visibility and a modern look. They feature a dual-function design: bright white LEDs serve as Daytime Running Lights (DRL), while high-intensity amber LEDs provide a crisp sequential turn signal effect.

Constructed for durability, these turn signals feature injection-molded black ABS plastic housings and smoked polycarbonate lenses. Each assembly is weather-sealed to protect the state-of-the-art internal electronics from moisture, dust, and road debris. Designed as a direct plug-and-play replacement for US-spec vehicles, these lights require no cutting or wiring modifications for a clean installation that typically takes about an hour.

• Manufacturer Part Number: 408222
• Lighting Type: White LED DRL / Amber LED Sequential Turn Signal
• Lens Finish: Smoked Polycarbonate
• Housing Material: Black Injection-Molded ABS Plastic
• Installation: Direct Plug-and-Play (No cutting required)
• Note: Designed for US-spec Mustangs only; EU/UK models require wiring modifications