Fits select 1996-2013 Audi A4, Porsche 911, Boxster, Cayman, and Volkswagen Golf models (1.8T).

This Sparco steering wheel hub adapter is engineered to provide a seamless connection between your vehicle's steering column and a standard 6-bolt aftermarket steering wheel. Designed with a specific focus on safety and fitment, this hub replaces the factory unit to allow for the installation of performance steering wheels while maintaining proper spacing and ergonomics for the driver.

• Manufacturer Part Number: 01502074CA
• Vehicle-specific design for Audi A4 (B-Series), VW Golf MK4, and multiple Porsche platforms
• Compatible with standard 6-bolt steering wheel patterns
• Durable construction designed for the rigors of performance driving
• Ensures proper fitment on 1.8T equipped Volkswagen and Audi models within the specified range

Fits select 1988-2009 Volkswagen Golf and Jetta models (1.8T / 2.0T).

The Sparco Steering Wheel Hub Adapter allows for the seamless installation of aftermarket 6-bolt steering wheels onto your Volkswagen's steering column. Designed to replace the factory unit while maintaining proper spacing and functionality, this hub adapter is an essential component for drivers upgrading to performance steering wheels from Sparco, MOMO, or OMP.

Each hub is engineered with precision tolerances to ensure a secure, hub-centric fit to the vehicle's splined steering shaft. The design provides necessary clearance for factory switchgear while maintaining the structural integrity required for both street and track use.

• Manufacturer Part Number: 01502073
• Mounting Pattern: Standard 6-bolt (70mm PCD)
• Construction: High-strength materials for maximum durability
• Fitment: Direct-fit for specified 1988-2009 VW steering columns

Fits 1980-1988 Volkswagen Golf and Jetta models.

The Sparco steering wheel hub adapter is a precision-engineered component designed to provide a secure connection between your vehicle's steering column and a standard 6-bolt aftermarket steering wheel. This hub is essential for drivers looking to replace their factory wheel with a Sparco, Momo, or other performance steering wheel to improve ergonomics and tactile feedback during spirited driving.

• Direct Fit: Designed for the specific spline count and diameter of 1980-1988 VW Golf and Jetta steering columns.
• Standard 6-Bolt Pattern: Compatible with most performance steering wheels including Sparco, OMP, and Momo.
• Durable Construction: Built from high-grade materials to ensure structural integrity and long-term reliability under high-load conditions.
• Hardware Compatibility: Replaces the factory hub while maintaining proper steering shaft alignment.
• Manufacturer Part Number: 01502072

Vehicle Fitment

Fits select 2002-2015 Mini Cooper models including Base, S, Clubman, Coupe, Roadster, and John Cooper Works variants.

The Sparco Steering Wheel Hub (MPN: 01502038) is a precision-engineered adapter designed to facilitate the installation of an aftermarket performance steering wheel. This hub converts the factory steering column spline to a standard 6-bolt mounting pattern, ensuring a secure and solid connection for enhanced driver feedback. Each unit is manufactured to strict tolerances for a direct, bolt-on fit without the need for column modifications.

• Standard 6-bolt mounting pattern compatible with most aftermarket steering wheels
• Precision-machined for a direct, high-strength connection to the factory spline
• Durable construction designed for performance and track use
• Manufacturer Part Number: 01502038

Vehicle Fitment

Fits select 1993-2007 Subaru Impreza models, including WRX, WRX STI, RS, TS, and Outback Sport.

The Sparco Steering Wheel Hub Adapter allows you to install an aftermarket 6-bolt steering wheel onto your factory steering column. Engineered for a precise fit, this hub adapter replaces the OEM assembly while maintaining solid steering feel and feedback. Constructed to meet the demands of performance driving and track use, it is a critical component for drivers looking to customize their cockpit with a race-oriented steering wheel.

• Direct fit for Subaru Impreza steering columns
• Compatible with standard 6-bolt pattern steering wheels
• Constructed for maximum durability and strength
• Essential for aftermarket steering wheel conversions
• Manufacturer Part Number: 01502033

Fits 1993-1997 Toyota Supra Base and Twin Turbo models.

The Sparco Steering Wheel Hub Adapter (MPN 01502032) allows for the seamless installation of a performance steering wheel onto your factory steering column. Engineered specifically for the A80 chassis, this hub provides a solid, dependable connection between the vehicle and any standard 6-bolt steering wheel. This adapter replaces the factory unit to provide the proper offset and mounting surface required for aftermarket racing wheels.

• Specifically designed for 1993-1997 Toyota Supra (A80) applications
• Compatible with Sparco, Momo, and OMP 6-bolt steering wheel patterns
• Precision-machined for a direct fit to the OEM steering shaft splines
• Durable construction ensures structural integrity during performance driving
• Manufacturer Part Number: 01502032

The Sparco Steering Wheel Hardware Kit (MPN 015002) provides the high-strength fasteners required to securely mount an aftermarket 6-bolt steering wheel to a hub adapter. Designed for professional-grade fitment, these bolts ensure a rigid connection to the steering column for precise input and driver feedback.

This kit features countersunk bolts that sit flush within the steering wheel spokes, maintaining a clean aesthetic and preventing any interference with hand movement. It is an essential component for new installations or when replacing worn or stripped hardware during a cockpit refresh.

• Manufacturer Part Number: 015002
• Kit Includes: (6) High-strength countersunk bolts
• Installation Tool: Includes hex/Allen key
• Compatibility: Standard 6-bolt steering wheels (Sparco, Momo, OMP)
• Finish: Durable black coating for a low-profile look

The Sparco FIA Battery Master Cut-Off Switch (01337) is a critical safety component designed for competition vehicles requiring compliance with international racing regulations. This heavy-duty 6-pole switch provides a reliable method to completely isolate the battery and kill the engine in emergency situations or during vehicle storage.

Unlike basic two-pole disconnects, this FIA-compliant unit features a specialized circuit designed to protect your vehicle's electronics. It includes a secondary circuit with a resistor that prevents alternator surge and engine "run-on" when the switch is thrown while the engine is running, shielding your ECU and alternator diodes from potentially fatal voltage spikes.

• Manufacturer Part Number: 01337
• FIA compliant for professional and amateur motorsport use
• 6-Pole configuration for battery isolation and ignition/alternator kill
• Includes alternator protection resistor to prevent electrical surges
• Equipped with a removable red key for safety and security
• Designed for panel mounting in accessible reach of the driver or external safety crews

The Sparco Battery Switch (MPN: 01336) provides a reliable method for isolating your vehicle's electrical system. Designed for motorsport, marine, and project car applications, this master disconnect switch allows for a complete circuit break, protecting against parasitic battery drain during long-term storage and serving as a manual safety cutoff.

• Prevents battery discharge by completely isolating the electrical system
• High-visibility red handle for fast and intuitive operation
• Rugged construction built to handle high-amperage automotive circuits
• Universal mounting design suitable for custom brackets or panel installation
• Manufacturer Part Number: 01336

Enhance driver and passenger comfort with the Sparco Belt Pad Mini in red. These shoulder pads are designed to wrap around your vehicle's seat belt or harness straps, reducing friction and preventing the webbing from chafing against your neck and chest during daily commutes or spirited driving.

• Manufactured with soft padding to improve comfort and reduce strap pressure
• Secure hook-and-loop (Velcro) fastener system for quick installation and adjustment
• Compact "Mini" sizing provides a clean, unobtrusive look for any interior
• Finished in red with the iconic Sparco logo embroidery
• Universal fitment for most standard seat belts and harnesses
• Manufacturer Part Number: 01099RS

The Sparco Mini Seat Belt Pads are designed to enhance driver and passenger comfort by mitigating the pressure and chafing caused by standard seat belt webbing. These pads provide a soft, cushioned barrier that prevents the belt edge from irritating the neck and shoulder area during daily commutes or extended track sessions.

• Enhanced Comfort: High-quality padding reduces harness pressure and eliminates belt-to-skin irritation.
• Easy Installation: Features a secure hook-and-loop closure system that wraps around the webbing for a quick, tool-free setup.
• Universal Application: Sized to fit most standard factory 3-point seat belts and various aftermarket racing harnesses.
• Durable Construction: Finished in a clean black fabric with the iconic Sparco logo, built to withstand regular use without fraying.
• MPN: 01099NR

The Sparco Racing 3-Inch Seat Belt Pads are designed to enhance driver comfort during high-performance driving and long track sessions. These pads wrap securely around any 3-inch harness webbing or wide seat belts, providing a cushioned barrier that prevents the strap edges from chafing or digging into the neck and shoulders.

• Specifically sized for 3-inch (75mm) racing harnesses and safety belts
• Constructed with soft internal padding for effective pressure distribution
• Features a durable outer cover with embroidered Sparco logo
• Integrated hook-and-loop fastening system for simple installation without removing straps
• Red finish provides a classic racing aesthetic for your interior
• Manufacturer Part Number: 01098S3R

The Sparco 3-Inch Racing Harness Belt Pad is engineered to enhance driver comfort by reducing shoulder pressure and chafing during high-performance driving. Designed specifically to wrap around 3-inch wide safety harness webbing, this pad provides a soft, padded interface between the strap and the driver's body, which is essential for maintaining focus during long track sessions or endurance events.

• Compatible with all 3-inch (75mm) wide racing harness straps
• Features a secure hook-and-loop fastening system for easy installation and adjustment
• Designed to distribute load across the collarbone and chest for improved ergonomics
• Classic black finish with signature Sparco branding
• Manufacturer Part Number: 01098S3N

Enhance driver comfort and reduce harness pressure with the Sparco 3-Inch Blue Racing Seat Belt Pads. These shoulder pads are engineered to wrap around standard 3-inch racing harness straps, providing a cushioned layer that prevents webbing from chafing against your neck or collarbone during high-G cornering and long track sessions.

• Designed for 3-inch wide racing harnesses and seat belts
• Soft padding distributes harness pressure more evenly across the shoulders
• Secure Velcro closure allows for easy installation and adjustment on factory or aftermarket belts
• Features iconic Sparco branding for a professional motorsport appearance
• Manufacturer Part Number: 01098S3A

Improve cabin comfort and cabin aesthetics with these Sparco Alcantara seat belt pads. Designed to wrap around any standard 2-inch (50mm) seat belt or racing harness, these pads effectively reduce shoulder chafing and pressure points during daily driving or spirited track sessions.

Constructed from premium Alcantara material, these pads provide a soft-touch feel and a high-grip surface that maintains its position on the strap. The integrated hook-and-loop closure system allows for a secure, tool-free installation on any compatible harness or factory seat belt system.

• Material: Authentic Red Alcantara for a premium finish and durability
• Width: Fits all 2-inch (50mm) belts and harnesses
• Closure: Heavy-duty hook-and-loop fastening
• Quantity: Sold as a pair
• Manufacturer Part Number: 01090R3RS

Enhance driver comfort and cabin aesthetics with the Sparco 2-inch Alcantara Seat Belt Pads. Designed to wrap around any standard 2-inch seat belt or racing harness, these pads provide a soft barrier between the webbing and your shoulder, effectively reducing chafing and pressure during daily driving or high-performance track sessions.

Constructed from genuine Alcantara, these pads offer a premium, non-slip feel and exceptional durability that withstands the rigors of frequent use. The secure hook-and-loop closure ensures a tight fit that stays in place on the shoulder strap. Whether you are upgrading a street car or finishing a race cockpit, these pads add a professional touch with iconic Sparco branding.

• Material: Premium Alcantara synthetic suede
• Width: Compatible with 2-inch (50mm) webbing
• Color: Black
• Closure: Heavy-duty hook-and-loop fastening
• Manufacturer Part Number: 01090R3NR

Restore the finish and functionality of your racing seat with the Sparco Evo Belt Shoulder Guide Set. These high-impact plastic inserts are designed to provide a smooth, snag-free passage for multi-point harness webbing through the shoulder ports of Evo series seats. Replacing worn or cracked guides prevents harness abrasion and protects the seat upholstery from fraying at the pass-through points.

• Genuine Sparco replacement components
• Engineered specifically for Sparco Evo series racing seats
• Durable plastic construction resists impact and wear
• Ensures proper harness positioning and smooth movement
• Manufacturer Part Number: 01061KIT559NR

Restore the adjustment functionality of your sport seats with the Sparco Seat Tilt Lever Set (MPN: 01060KIT558NR). Designed as a direct-fit replacement for Sparco R100 and Chrono reclining seats, these levers allow you to easily actuate the tilt mechanism for proper seating position and access to the rear cabin.

Constructed from high-strength composite materials to withstand frequent use, this kit replaces worn, cracked, or missing factory levers. It maintains the original ergonomics and aesthetic of your Sparco interior while ensuring the reclining mechanism operates smoothly.

• Direct replacement for Sparco R100 and Sparco Chrono seat series
• Engineered to factory specifications for precise fitment
• Durable composite construction for long-term reliability
• Kit includes levers for seat tilt adjustment
• Manufacturer Part Number: 01060KIT558NR

Restore the full functionality of your Sparco R333 reclining sport seat with this genuine replacement tilt lever set. Engineered specifically for the R333 model series, these levers provide the necessary leverage to adjust the seat back angle, ensuring reliable operation and proper ergonomics during use.

Constructed to match the original factory specifications, this kit is an essential repair component for seats with worn, cracked, or missing adjustment handles. It installs directly onto the existing seat mechanism to return your interior to its original look and feel.

• Direct replacement for Sparco R333 reclining sport seats
• Complete lever set for seat back adjustment
• Finished in durable black to match original seat hardware
• Genuine Sparco replacement part
• Manufacturer Part Number: 01057KIT965NR

The Sparco Competition Belt Lap Guide Set is an essential component for maintaining precise harness geometry in performance and racing environments. These guides are engineered to keep the lap belt properly positioned across the driver's pelvic region, preventing the belt from shifting or riding up during aggressive cornering or in the event of an impact.

• Ensures optimal lap belt routing for increased driver safety and restraint effectiveness
• Prevents harness webbing from migrating during high-G maneuvers
• Designed for compatibility with Sparco competition seats and multi-point harness systems
• Constructed for durability in professional racing conditions
• Manufacturer Part Number: 01057KIT555NR

The Sparco Black Rear Textured Seat Cushion (MPN: 01031) is an ergonomic accessory designed to improve driver comfort and optimize seating position within a racing seat. This cushion provides critical support to the lumbar or lower back area, helping to reduce fatigue during long track sessions or endurance events.

Constructed with high-density padding and a durable, textured rear surface for better grip against the seat shell, this component allows drivers to fine-tune their cockpit ergonomics. It is a practical solution for racers who need to adjust their reach to the pedals and steering wheel or those seeking a more customized fit in fixed-back bucket seats.

• Manufacturer Part Number: 01031
• Color: Black with textured finish
• Application: Universal fitment for most racing seats
• Enhances ergonomic support and driver positioning
• Lightweight, durable construction for competition use

The Sparco Lumbar Support Cushion (01023NR) provides critical ergonomic support for performance driving and long commutes. This contoured black cushion is engineered to bridge the gap between the driver's lower back and the seat back, promoting better spinal alignment and reducing muscle fatigue during high-G cornering or extended stints behind the wheel.

• Provides targeted lower back support to improve driving posture
• Compatible with most Sparco racing seats and standard automotive bucket seats
• High-density foam construction for consistent shape retention
• Durable fabric finish for long-lasting use in performance environments
• Manufacturer Part Number: 01023NR

Improve your seating ergonomics and lateral support with the Sparco Side Cushion. Designed for use with Sparco competition seats, this cushion (MPN 01022NR) allows for a more tailored fit inside the cockpit, helping to eliminate excess movement during high-G cornering and providing much-needed comfort during long stints on the track.

• Provides additional lateral support for a snug, secure racing fit
• Finished in durable black fabric to match Sparco racing interiors
• Ideal for customizing the lumbar or side bolster area to suit the driver
• Manufacturer Part Number: 01022NR

The Sparco Rev Racing Seat Leg Cushion (01011NR) is a technical replacement component designed to maintain the ergonomic performance and comfort of your Sparco Rev series competition seat. This cushion provides critical support for the driver's thighs and upper legs, helping to reduce fatigue during high-G cornering and extended sessions on the track.

• Specifically engineered for compatibility with Sparco Rev series racing seats
• Constructed with high-density foam for consistent support and shape retention
• Finished in durable black fabric to match original upholstery
• Simple installation allows for quick replacement or cleaning
• Manufacturer Part Number: 01011NR

Bring the heritage of the paddock to your workspace with the Sparco Icon Martini-Racing office chair. This professional-grade seating solution is designed for the automotive enthusiast, blending the ergonomic support of a performance seat with the versatility required for daily office use. As part of the Icon series, this chair is engineered with a lower and wider seat profile to provide superior comfort during extended sessions.

This edition features the world-renowned Martini Racing livery, honoring decades of motorsport excellence. Constructed with the same quality standards Sparco applies to their competition equipment, it provides a stable and durable base for any professional environment or home office.

• Manufacturer Part Number: 00998SPMR
• Series: Icon Martini-Racing
• Ergonomics: Lower, wider seat design for improved comfort
• Base: Heavy-duty swivel base with high-stability casters
• Functionality: Integrated height adjustment and tilt-recline mechanism

The Sparco SPX represents a premium evolution in performance seating, combining the lateral support of a racing shell with the comfort and adjustability required for high-end street use. Handcrafted in Italy, this seat is designed to mirror the aesthetics and material quality found in modern supercars, featuring a sophisticated mix of smooth black leather and perforated Alcantara.

This right-side seat utilizes a precision reclining mechanism to allow for ideal positioning while maintaining the structural integrity needed for spirited driving. The ergonomic shape is engineered to reduce fatigue during long-distance hauls while the Alcantara inserts provide the necessary friction to keep the occupant firmly planted during high-G cornering. It serves as a direct upgrade for enthusiasts seeking a factory-plus interior aesthetic without compromising on performance.

• Upholstered in genuine Italian black leather with perforated Alcantara inserts
• Ergonomic design tailored for both lateral support and long-distance comfort
• Precision reclining adjustment for optimal seating geometry
• Slim backrest profile to maximize interior cabin space
• Manufacturer Part Number: 00974ZNRDX
• Configuration: Right Side

The Sparco SPX Special Edition represents the pinnacle of performance seating, bridging the gap between a dedicated racing shell and a high-performance reclining road seat. This right-side seat features a hand-crafted gloss carbon fiber shell, engineered to provide exceptional rigidity and weight savings for high-performance applications. The Special Edition Black/Red finish adds a striking aesthetic to any interior while maintaining the ergonomic support required for spirited driving and long-distance touring.

• Manufacturer Part Number: 00974ZGLNRRSDX
• Shell Construction: Lightweight Gloss Carbon Fiber
• Adjustment: Precision reclining mechanism with micro-adjustment
• Position: Right (Passenger side for LHD vehicles)
• Finish: Special Edition Black and Red upholstery
• Design: Slim profile compatible with modern performance cockpits

The Sparco GT reclining performance seat (MPN 009012NR) is engineered for drivers who require superior lateral support during spirited driving without sacrificing the adjustability of a street seat. This seat bridges the gap between restrictive factory seating and fixed-back racing buckets, making it an ideal choice for high-performance street builds and weekend track cars.

Built for durability and comfort, the GT features an ergonomic design with high-density padding and deep side bolsters to secure the torso and thighs against lateral G-loads. The precision reclining mechanism allows for fine-tuned positioning, while the bottom-mount configuration ensures compatibility with a wide range of vehicle-specific seat brackets.

• Manufacturer Part Number: 009012NR
• Adjustable reclining mechanism for optimal driving posture
• Deep lateral bolsters for enhanced body retention
• Upholstered in durable black fabric designed for long-term wear
• Bottom-mount installation style
• Ergonomic lumbar and thigh support for long-distance comfort

The Sparco R333 provides a bridge between daily driving comfort and the lateral support required for spirited driving. Featuring a modern, aggressive aesthetic, this seat is designed with deep side bolsters and a sculpted backrest to keep the driver centered during high-G cornering without sacrificing the ease of entry and exit expected from a street-focused reclining seat.

• Model: R333 (2021 Series)
• Color: Black/Red
• Manufacturer Part Number: 009011NRRS
• Double adjustment lever for fast and precise backrest reclining from both sides
• Deep side bolsters for enhanced lateral support
• Compatible with standard 3-point seat belts or 4-point racing harnesses
• Bottom-mount configuration for vehicle-specific seat brackets

This seat is ideal for enthusiasts looking to upgrade their interior with a high-performance look and improved ergonomics. The R333's slim profile makes it an excellent choice for smaller cockpits where space is at a premium.

The Sparco R333 2021 Edition is a high-performance reclining street seat designed for drivers who require significant lateral support without sacrificing the versatility of a daily-driven vehicle. This seat features deep side bolsters and a sculpted cushion to keep the driver centered during spirited driving, while the reclining mechanism provides flexibility for cabin access and ergonomics.

Constructed with premium materials for durability and a modern aesthetic, the R333 integrates seamlessly into performance-oriented interiors. It is designed for use with performance seat brackets and can accommodate various harness configurations.

• Manufacturer Part Number: 009011NRGR
• Series: R333 (2021 Model)
• Color: Black with Grey accents
• Operation: Dual-lever reclining mechanism for precise adjustment
• Compatibility: Suitable for use with 3 or 4-point harnesses
• Mounting: Requires vehicle-specific Sparco seat brackets and sliders for installation