The Sparco FIA Battery Master Cut-Off Switch (01337) is a critical safety component designed for competition vehicles requiring compliance with international racing regulations. This heavy-duty 6-pole switch provides a reliable method to completely isolate the battery and kill the engine in emergency situations or during vehicle storage.

Unlike basic two-pole disconnects, this FIA-compliant unit features a specialized circuit designed to protect your vehicle's electronics. It includes a secondary circuit with a resistor that prevents alternator surge and engine "run-on" when the switch is thrown while the engine is running, shielding your ECU and alternator diodes from potentially fatal voltage spikes.

• Manufacturer Part Number: 01337
• FIA compliant for professional and amateur motorsport use
• 6-Pole configuration for battery isolation and ignition/alternator kill
• Includes alternator protection resistor to prevent electrical surges
• Equipped with a removable red key for safety and security
• Designed for panel mounting in accessible reach of the driver or external safety crews

The Sparco Battery Switch (MPN: 01336) provides a reliable method for isolating your vehicle's electrical system. Designed for motorsport, marine, and project car applications, this master disconnect switch allows for a complete circuit break, protecting against parasitic battery drain during long-term storage and serving as a manual safety cutoff.

• Prevents battery discharge by completely isolating the electrical system
• High-visibility red handle for fast and intuitive operation
• Rugged construction built to handle high-amperage automotive circuits
• Universal mounting design suitable for custom brackets or panel installation
• Manufacturer Part Number: 01336

Fits 2007-2011 Jeep Wrangler and Wrangler Unlimited JK models.

Outfitting a trail rig with a winch, air compressor, and auxiliary lighting puts significant strain on your factory electrical system. The Rugged Ridge Dual Battery Tray provides a robust solution, allowing you to double your power capacity by mounting two batteries in the space of the factory single battery unit. This is an essential upgrade for off-roaders who require reliable amperage during extended winching sessions or while running multiple high-draw accessories.

• Fits 2007-2011 Jeep Wrangler (JK/JKU)
• Compatible with standard lead-acid or cylindrical-style sealed gel cell batteries
• Constructed from heavy-duty steel with a durable black powder-coated finish
• Mounts directly in the factory battery location
• Includes suggested wiring diagram for installation
• Mounting kit only; electrical wiring and batteries not included
• Manufacturer Part Number: 11214.53
• Limited 5-year warranty

Fits all 1997-2006 Jeep Wrangler (TJ) models, including Sport, Sahara, Rubicon, SE, X, and 65th Anniversary Edition.

Equipping a trail rig with a winch, air compressor, or auxiliary lighting creates significant demand on your vehicle's electrical system. The Rugged Ridge Dual Battery Tray provides a robust solution for off-roaders needing redundant power or increased capacity. This kit allows you to mount two batteries in the same footprint as the original factory tray, ensuring you have the amperage necessary for high-draw recoveries and extended use of electronics.

Specifically engineered for the TJ platform, this tray utilizes a stacked configuration to maximize engine bay space. Due to this mounting orientation, this tray is designed exclusively for use with cylindrical-style sealed gel cell batteries (such as Optima-style) to prevent leaks and ensure reliable performance during extreme articulation. The assembly is constructed from heavy-duty steel with a durable black powder-coated finish to resist corrosion in harsh environments.

• Fits 1997-2006 Jeep Wrangler (TJ)
• Designed for cylindrical-style sealed gel cell batteries only
• Replaces factory single battery tray for a clean, integrated look
• Heavy-duty steel construction with black powder-coated finish
• Includes mounting hardware and suggested wiring diagram
• Manufacturer Part Number: 11214.52
• Limited 5-year warranty

Note: This is a mounting kit only. Electrical wiring and batteries are not included.

Fits 1991-1995 Jeep Wrangler YJ models including Base, Islander, Renegade, Rio Grande, S, Sahara, and SE.

High-demand trail accessories like winches, air compressors, and auxiliary lighting put significant strain on your Jeep's electrical system. The Rugged Ridge Dual Battery Tray (MPN 11214.51) allows you to install two batteries in the factory location, providing the reserve power and amperage needed for extended winching or heavy accessory use.

Constructed from durable steel with a corrosion-resistant black powder-coated finish, this tray is designed for side-by-side battery placement. It is compatible with both traditional lead-acid batteries and cylindrical-style sealed gel cell batteries. This is a hardware mounting kit; it includes a suggested wiring diagram but does not include battery cables or wiring.

• Direct fit for 1991-1995 Jeep Wrangler YJ engine bays
• Replaces factory single battery tray to provide dual battery capacity
• Compatible with lead-acid or sealed gel cell (cylindrical style) batteries
• Durable black powder-coated steel construction
• Includes mounting tray, hardware, and suggested wiring diagram
• Manufacturer Part Number: 11214.51
• Limited 5-Year Warranty

Fits select 1970-1990 Jeep CJ5, CJ6, CJ7, Scrambler, and Wrangler models. This Rugged Ridge dual battery tray is designed for trail rigs equipped with high-draw electrical accessories like winches, air compressors, and auxiliary lighting that tax a single battery system.

Constructed from heavy-duty steel with a durable black powder-coated finish, this tray replaces the factory single battery mount to secure two batteries side-by-side. The mounting kit is compatible with traditional lead-acid or cylindrical-style sealed gel cell batteries. While this kit includes a suggested wiring diagram to assist with your setup, please note that electrical wiring and isolators are not included.

• Fits 1970-1990 Jeep CJ and Wrangler models in the factory battery location
• Supports side-by-side mounting for lead-acid or gel cell batteries
• Heavy-duty steel construction with black powder-coated finish
• Includes mounting brackets and suggested wiring diagram
• Manufacturer Part Number: 11214.50
• Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Replace a rusted or damaged factory mounting system with the Rugged Ridge Battery Tray Kit. This OE-style kit provides a secure, stable platform for your battery, designed to withstand the vibrations and rigors of off-road driving. Every component is finished in a durable semi-gloss black powder coating to resist corrosion from battery acid and environmental exposure.

This comprehensive kit is a direct-fit solution that bolts to factory locations for a straightforward installation. It includes the tray, vertical brace, and clamp, providing a complete refresh for your battery mounting hardware.

• Direct OE-style replacement for factory part
• Durable semi-gloss black powder-coated finish
• Complete kit includes tray, brace, clamp, and necessary hardware
• Manufacturer Part Number: 11214.01
• Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Upgrade your engine bay with the Rugged Ridge OE-style battery tray clamp, engineered to replace corroded or worn factory hardware. Constructed from prime 304 stainless steel and polished to a mirror finish, this clamp is designed to withstand the harsh chemical environment of your battery while remaining virtually rust-proof for the life of your vehicle.

This direct-fit accessory features a simple bolt-on application that requires no drilling or modifications to the factory mounting points. To ensure a cohesive, high-end look and maximum longevity, all included mounting hardware is also manufactured from high-grade stainless steel.

• Material: Mirror-polished 304 stainless steel
• Installation: Direct bolt-on; no drilling required
• Hardware: Complete stainless steel fastener set included
• Design: OE-style fitment for secure battery retention
• Manufacturer Part Number: 11132.03
• Warranty: Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Replace your corroded or weathered factory hardware with the Rugged Ridge Stainless Steel Battery Tray Kit. Engineered for the demanding engine bay environment, this kit is constructed from prime 304 stainless steel, making it virtually rust-proof and resistant to the corrosive effects of battery acid and moisture. The mirror-polished finish provides a high-end, custom look for restoration projects and trail rigs alike.

This kit is designed as a direct-fit, OE-style replacement, ensuring it bolts into factory mounting locations without the need for custom fabrication. By utilizing high-grade 304 stainless steel instead of painted or plated mild steel, this tray offers long-term durability and structural integrity that exceeds original equipment standards.

• Fabricated from prime 304-grade stainless steel for superior corrosion resistance
• Mirror-polished finish for a show-quality appearance
• OE-style design ensures a direct-fit, bolt-on installation
• Complete kit replaces worn or rusted battery support components
• Manufacturer Part Number: 11132.01
• Includes Limited 5-Year Warranty

Moroso 74140 Remote Battery Jumper Terminals provide a reliable, external access point for battery charging and jump-starting when the battery is relocated or difficult to reach. This kit is an essential upgrade for race cars, customs, and off-road vehicles where the battery is tucked away in a trunk, battery box, or behind body panels.

Constructed for high conductivity and durability, these terminals are designed to mount through body panels to provide a professional and secure connection. The set includes two terminals, color-coded red and black for immediate polarity identification to prevent accidental crossing of leads during service.

• Manufacturer Part Number: 74140
• Provides easy external access for charging or jump-starts
• Includes one red (positive) and one black (negative) terminal
• Designed for mounting through body panels or battery boxes
• High-conductivity terminals ensure efficient power transfer
• Ideal for vehicles with relocated batteries or limited engine bay access

The Moroso 74098 Multi-Power Battery Terminal Block is designed to simplify electrical distribution directly from your vehicle's battery. Engineered to fit both SAE and JIS tapered battery posts, this block provides a secure, low-resistance connection point for multiple auxiliary power leads, such as ignition systems, data loggers, or cooling fans.

Constructed for durability and maximum conductivity, it replaces cluttered single-post connections with an organized distribution hub. This setup is ideal for performance builds where multiple high-current accessories require a reliable power source without compromising the integrity of the main battery terminal.

• Manufacturer Part Number: 74098
• Compatibility: Fits standard SAE and JIS tapered battery posts
• Function: Multi-point power distribution for auxiliary electronics
• Design: Compact, high-conductivity block with multiple hardware attachment points

The Moroso 74055 Battery Cable Installation Kit provides the professional-grade hardware required to establish secure, high-conductivity electrical connections in your vehicle. Designed for performance applications where reliable power delivery is critical, this kit is an essential component for battery relocation or custom wiring projects in race, street, and show vehicles.

• Engineered for high-current applications to ensure minimal voltage drop
• Includes heavy-duty terminals and hardware for long-lasting durability
• Ideal for custom battery cable routing and termination
• Genuine Moroso quality for high-vibration automotive environments
• Manufacturer Part Number: 74055

Relocate your vehicle's battery for better weight distribution or to clear engine bay space with the Moroso 74051 sealed battery box. This heavy-duty black enclosure is designed specifically for performance applications where the battery is moved to the trunk or interior compartment. The sealed design ensures that battery fumes and acid are contained and properly vented outside the vehicle, meeting strict NHRA and IHRA safety requirements for battery relocation.

• Manufactured by Moroso (MPN: 74051)
• Sealed design permits safe mounting in the passenger compartment or trunk
• Designed to fit standard Group 24 batteries
• Meets NHRA Rule 8:1 and IHRA safety standards
• Includes heavy-duty mounting hardware, battery hold-down, and vent tube
• Durable black finish for a professional under-hood or trunk appearance