Fits select 2003-2013 Dodge Ram 1500, 2500, and 3500 HD 4x4 models.

The Synergy Knurled Adjustable Ball Joint Kit is engineered to restore steering precision and front-end durability for heavy-duty Ram trucks. Featuring a knurled housing, this kit (MPN: 4123KN) is specifically designed to provide a secure, tight press-fit in axle housing bores that have become slightly oversized or stretched from previous ball joint replacements.

• Knurled outer housing ensures a positive fit in worn or oversized axle C-ends
• Adjustable design allows for precise front-end alignment and component longevity
• Heavy-duty construction exceeds factory tolerances for off-road and towing applications
• Direct replacement for worn OE components on solid axle 4x4 models
• Manufacturer Part Number: 4123KN

Each kit includes the necessary hardware for installation. These ball joints are built to withstand the increased loads of larger tires and heavy accessories while maintaining smooth, predictable steering geometry.

Fits select 2003-2013 Dodge Ram 1500 (Mega Cab), 2500, and 3500 HD 4x4 trucks.

The Synergy Manufacturing Non-Knurled Adjustable Ball Joint Kit (MPN 4123) is a heavy-duty solution for correcting front-end alignment and restoring steering precision. Unlike knurled options that can permanently enlarge axle housings, these non-knurled joints are designed for a standard press-fit into undamaged housings, maintaining the integrity of your axle's C-gussets. The adjustable design allows technicians to fine-tune caster or camber, effectively addressing the steering wander and uneven tire wear often associated with heavy-duty Ram solid-axle front ends.

• Non-knurled design ensures a precise fit without overstressing the factory axle housing.
• Adjustable configuration allows for custom caster/camber correction to optimize alignment specs.
• Designed to withstand the increased loads of larger aftermarket tires and heavy-duty use.
• Replaces worn OE components to help eliminate steering instability and "death wobble" symptoms.
• Includes all necessary hardware for a complete installation.
• Manufacturer Part Number: 4123

The Synergy Manufacturing HD Knurled Front Ball Joint Set (4120-04) is engineered to restore front-end stability in 1984-2006 Jeep models equipped with Dana 30 or Dana 44 front axles. These heavy-duty joints feature a knurled outer housing specifically designed to provide a secure, tight press-fit in axle C-ends where the original bores have become slightly oversized or wallowed out from repeated replacements or rigorous off-road use.

Each set is built to exceed factory tolerances, offering a more robust alternative to standard replacement joints. This complete kit includes the upper and lower ball joints and necessary hardware to service the front axle, ensuring precise steering geometry and eliminating the movement often found with standard-fit joints in worn housings.

• Fits 1984-2006 Jeep Cherokee XJ, Wrangler YJ/TJ/TJL, and Grand Cherokee ZJ with Dana 30 or Dana 44 axles.
• Knurled design ensures maximum retention in oversized or worn axle housing bores.
• Heavy-duty (HD) construction for increased service life and resistance to lateral loads.
• Restores steering precision and prevents joint-to-bore movement.
• Complete set including all required mounting hardware.
• Manufacturer Part Number: 4120-04

Fits 1984-2006 Jeep TJ, LJ, XJ, YJ, and ZJ models equipped with Dana 30 or Dana 44 front axles.

The Synergy HD Knurled Front Ball Joint Set (MPN 4120) is engineered to replace failing factory components with a heavy-duty solution designed for the rigors of off-road use and larger tire diameters. These ball joints feature a knurled housing to ensure a secure, high-interference press-fit in axle inner C-gussets that may have become slightly enlarged or worn over time. This complete kit provides everything needed to refresh the steering axis on one front axle.

• Heavy-duty construction exceeds OE specifications for durability and service life
• Knurled outer housing maintains a tight fit in oversized or worn axle bores
• Designed for Dana 30 and Dana 44 front axle applications
• Greaseable design allows for regular maintenance to purge contaminants
• Manufacturer Part Number: 4120
• Includes: (2) Upper Ball Joints and (2) Lower Ball Joints

Widen your track and improve tire clearance with Synergy Manufacturing Hub Centric Wheel Spacers. Designed for Jeep applications featuring a 5x5 (5x127mm) bolt pattern, these 1.75-inch spacers provide the offset needed to clear larger tires and prevent rubbing on suspension components or frame rails.

The hub-centric design is critical for off-road and street use, ensuring that the wheel remains centered on the hub rather than relying solely on the studs for alignment. This eliminates steering wheel vibration and ensures the load is properly distributed across the hub assembly. These spacers come with 1/2-20 UNF studs pre-installed, making them a direct bolt-on solution for compatible Jeep models.

• Bolt Pattern: 5x5 inches (5x127mm)
• Width: 1.75 inches
• Stud Size: 1/2-20 UNF
• Material: High-strength aluminum construction
• Quantity: Includes two (2) spacers with lug nuts
• Manufacturer Part Number: 4113-5-50-H

Enhance your vehicle's stance and tire clearance with Synergy Hub Centric Wheel Spacers. These spacers provide a precise 1.50-inch increase in track width, offering an effective solution for fitting larger tires or correcting wheel offset to prevent interference with suspension components and brake calipers.

The hub-centric design is engineered to ensure the wheel is centered directly on the hub rather than relying solely on the studs, resulting in a stable, vibration-free ride. Each spacer comes with high-strength wheel studs pre-installed to simplify the installation process and ensure a secure fit.

• Manufacturer Part Number: 4112-6-55-H
• Spacer Width: 1.50 inches
• Bolt Pattern: 6x5.5 (6x139.7mm)
• Wheel Stud Size: M12x1.50
• Mounting Type: Hub-centric for precise wheel centering

Fits select Jeep models with a 5x5 (5x127mm) bolt pattern and 1/2-20 UNF wheel studs. These Synergy Manufacturing hub-centric wheel spacers are engineered to widen your vehicle's track by 1.50 inches per side. This additional offset provides the necessary clearance for larger, wider tires to prevent rubbing against suspension components or frame rails during full-lock turns.

Unlike generic spacers, these are hub-centric, meaning they utilize the center bore of the hub to support the wheel. This design ensures proper alignment, minimizes vibration, and maintains factory-level ride quality. Each spacer is manufactured to tight tolerances and includes pre-installed 1/2-20 UNF studs for a secure fitment.

• Manufacturer Part Number: 4112-5-50-H
• Width: 1.50 inches
• Bolt Pattern: 5x5 (5x127mm)
• Stud Size: 1/2-20 UNF
• Design: Hub-centric for vibration-free performance
• Installation: Bolts to factory hub with included hardware

The Synergy Hub Centric Wheel Adapters (MPN 4112-5-45-50-H) allow for the seamless installation of wheels with a 5x5 bolt pattern onto Jeep vehicles equipped with a factory 5x4.5 lug pattern. These 1.50-inch wide adapters provide the necessary offset to clear larger tires and suspension components while improving the vehicle's track width and stability.

• Hub-Centric Design: Ensures the wheel is centered precisely on the hub rather than just the studs, effectively eliminating vibration and reducing shear stress on the wheel hardware.
• Bolt Pattern Conversion: Adapts 5x4.5 (114.3mm) vehicle hubs to 5x5 (127mm) wheel patterns.
• Width: 1.50-inch thickness provides significant clearance for aftermarket wheel and tire combinations.
• High-Strength Hardware: Includes pre-installed wheel studs and necessary lug nuts for a secure installation.
• Manufacturer Part Number: 4112-5-45-50-H

Fits select 1984-2018 Jeep Cherokee XJ, Wrangler YJ/TJ/LJ/JK/JKU, and Grand Cherokee ZJ models.

This high-strength Synergy wheel spacer replacement stud is designed to restore the integrity of your wheel assembly by replacing damaged, cross-threaded, or stripped studs on existing wheel spacer kits. Maintaining proper torque and hardware condition is essential for safe off-road operation, particularly on Jeep models equipped with oversized tires or high-offset wheels. This hardware kit ensures a secure, reliable mounting surface that meets the demands of trail use.

• Manufacturer Part Number: 4110-14-1.5
• Thread Pitch: 14mm x 1.50
• Included Hardware: (1) Replacement wheel stud and (1) matching lug nut
• Compatibility: Engineered specifically for Synergy-brand wheel spacers
• Application: Direct replacement for worn or broken hardware

The Synergy Manufacturing Fox TS and ATS Steering Stabilizer Clamp Adapter (MPN: 4051-01) is engineered to provide a secure, precise mounting solution for Fox Through Shaft (TS) and Adjustable Through Shaft (ATS) steering stabilizers. This adapter allows these specific Fox stabilizer models to interface correctly with Synergy steering stabilizer clamps, ensuring proper alignment and clearance within your vehicle's steering geometry.

• Manufacturer Part Number: 4051-01
• Application: Interfaces Fox TS and ATS stabilizers with Synergy steering stabilizer clamps
• Construction: High-strength hardware designed for rigorous off-road use
• Optimizes stabilizer positioning to prevent binding or interference
• Direct fit component for specialized steering dampening setups

Fits 2007-2018 Jeep Wrangler JK models equipped with a 1.625-inch (1-5/8") outer diameter tie rod.

This Synergy steering stabilizer tie rod clamp provides a secure, bolt-on solution for mounting steering stabilizers to heavy-duty 1.625-inch OD tie rods. It is designed to replace the stock stabilizer mount, which often presents clearance issues or inadequate strength when upgrading steering components. This clamp allows for the repositioning of the stabilizer to help prevent damage from trail obstacles.

• Designed specifically for 1.625-inch (1-5/8") outer diameter tie rods
• Compatible with steering stabilizers utilizing a 1/2-inch mounting bolt
• CNC machined for precise tolerances and maximum clamping force
• 100% bolt-on installation requires only basic hand tools
• Manufacturer Part Number: 4050-63

Designed for Jeep Wrangler JK models (2007-2018), this Synergy Manufacturing steering stabilizer tie rod clamp (MPN 4050-50) provides a rock-solid mounting point for your steering stabilizer when upgrading to an aftermarket 1.50-inch OD tie rod. It is specifically engineered to replace the stock stabilizer mount, which often lacks the clearance or strength required for heavy-duty off-road use.

The clamp features a precision CNC-machined design to ensure a perfect fit on 1.5-inch tubing without slipping. Its low-profile architecture is intentional, providing maximum clearance between the stabilizer and other critical steering components to prevent binding during full suspension articulation. This bolt-on component is a direct solution for JK owners looking to improve steering geometry and component security.

• Fits Jeep Wrangler JK 2007-2018 with 1.50-inch OD Tie Rods
• CNC machined for precise fit and finish
• Low-profile design minimizes interference with other steering parts
• Simplifies steering stabilizer relocation or installation
• Direct bolt-on application
• Manufacturer Part Number: 4050-50

The Synergy Manufacturing Spring Loaded T-Handle Pull Pin (MPN 4026) is a heavy-duty solution for custom fabrication projects requiring reliable quick-release locking mechanisms. This spring-loaded assembly is engineered for use on spare tire carriers, seat sliders, and telescoping tubing, allowing for fast and secure indexing of moving parts.

• Features an ergonomic T-handle design for a firm grip even with gloves
• Heavy-duty spring mechanism ensures positive engagement in the locked position
• Designed for weld-on or custom bracket applications in off-road and automotive fabrication
• Ideal for adjustable mounts, removable accessories, and indexing racks
• Manufacturer Part Number: 4026

The Synergy Manufacturing Toe Alignment Tool (MPN 3102-01) is an essential diagnostic and setup tool for any garage or off-road shop. Designed to facilitate accurate DIY wheel alignments, this tool allows you to precisely set toe-in and toe-out without the need for a professional alignment rack. It is particularly useful after installing new steering components, such as tie rods or drag links, or after adjusting suspension height.

By providing a flat, consistent surface against the wheel or hub, these plates eliminate the measurement errors often caused by uneven tire sidewalls or tread lugs. This ensures your steering geometry is within spec to prevent premature tire wear and improve straight-line tracking.

• Enables precise toe measurements using standard tape measures
• Essential for post-installation steering and suspension setup
• Heavy-duty construction for long-term shop durability
• Replaces guesswork with repeatable, accurate measurements
• Manufacturer Part Number: 3102-01