Fits 2005-2006 Mitsubishi Lancer Evolution, including MR, RS, and SE models.

The Torque Solution Billet Aluminum Rear Engine Mount is engineered to eliminate excessive engine movement and improve power transfer to the ground. By replacing the compliant factory rubber mount with a CNC-machined 6061-T6 billet aluminum housing and 75A durometer polyurethane bushings, this upgrade significantly reduces wheel hop and improves shifting precision during hard acceleration and aggressive driving.

This mount is a direct-fit replacement for the OEM rear engine mount, utilizing factory mounting points for a straightforward installation. The black anodized finish provides long-lasting corrosion resistance, making it an essential drivetrain upgrade for high-performance Evo VII-IX builds.

• CNC machined 6061-T6 billet aluminum construction
• 75A durometer polyurethane bushings
• Black anodized finish for durability
• Reduces wheel hop and drivetrain slop
• Direct replacement for factory rear mount
• Manufacturer Part Number: TS-EV-003

Fits 2005-2006 Mitsubishi Lancer Evolution models including MR, RS, and SE.

Designed to significantly reduce engine movement and improve power transfer, the Torque Solution Front Engine Mount (TS-EV-002) is a direct upgrade over the soft, factory rubber mount. By limiting the fore-and-aft pitch of the engine during hard acceleration and shifting, this mount eliminates wheel hop and provides a more connected feel through the drivetrain.

Each mount is CNC machined from 6061-T6 billet aluminum for high strength and lightweight performance. It features high-durometer polyurethane bushings that offer a balance between vibration dampening and rigid support. This is an essential upgrade for high-horsepower builds or street cars looking for crisper shifts and better traction.

• Manufacturer Part Number: TS-EV-002
• Material: CNC 6061-T6 Billet Aluminum
• Bushing Material: High-Durometer Polyurethane
• Finish: Anodized for corrosion resistance
• Installation: Bolts to factory mounting points

Fits 2005-2006 Mitsubishi Lancer Evolution, MR, RS, and SE.

The Torque Solution Billet Aluminum Passenger Side Engine Mount is engineered to eliminate the excessive engine movement common with soft factory rubber mounts. By securing the engine more rigidly, this mount reduces wheel hop and improves power transfer to the ground, making it an essential upgrade for high-performance Mitsubishi Evolution VII-IX applications.

Constructed from high-grade 6061 billet aluminum, this mount offers superior durability over OEM components without sacrificing the reliability needed for street and track use. It is designed as a direct-fit replacement, utilizing factory mounting points for a clean and efficient installation process.

• Manufacturer Part Number: TS-EV-001
• Material: CNC Machined 6061 Billet Aluminum
• Placement: Passenger Side
• Reduces engine movement and wheel hop for better traction
• Direct replacement for factory mounting hardware

The Torque Solution Fast Response SD IAT Sensor Kit is an essential upgrade for vehicles running a Speed Density (SD) tuning setup. Standard intake air temperature sensors often feature a closed-element design that reacts slowly to temperature fluctuations or suffers from heat soak. This GM-style open-element sensor is engineered for rapid data feedback, allowing your ECU to make precise fueling and timing adjustments based on real-time intake temperatures.

This comprehensive kit includes everything needed to relocate or add an IAT sensor to your charge pipe or intake manifold. The included weld-on bung is constructed from high-quality stainless steel for durability and corrosion resistance, ensuring a leak-free seal after installation.

• Part Number: TS-ES-IAT-GMPS
• Sensor Type: Fast-response GM-style open element IAT
• Bung Material: 304 Stainless Steel
• Wiring: 2-wire pigtail harness included for easy integration
• Application: Ideal for Speed Density conversions and forced induction applications

Included Hardware: (1) Fast Response IAT Sensor, (1) Wiring Pigtail, (1) Stainless Steel Weld Bung.

The Torque Solution Fast Response SD IAT Sensor Kit is an essential upgrade for vehicles utilizing a Speed Density (SD) tuning strategy. This kit provides the ECU with rapid, high-accuracy intake air temperature data, which is critical for maintaining precise fueling and ignition timing during varying load conditions and boost levels.

Featuring a GM-style sensor known for its reliability and quick thermal response, this kit allows you to relocate your IAT reading to the most effective point in your intake tract. The included aluminum weld bung ensures a professional, leak-free installation into custom intercooler piping or intake manifolds.

• Fast response GM-style Intake Air Temperature (IAT) sensor
• Includes a dedicated wiring pigtail for secure electrical connectivity
• High-quality aluminum weld-on bung for custom intake integration
• Optimized for Speed Density tuning applications
• Manufacturer Part Number: TS-ES-IAT-GMPA

The Torque Solution Fast Response Intake Air Temperature (IAT) Sensor is engineered for high-performance tuning applications where precision and speed are critical. Unlike standard closed-element sensors that often suffer from heat soak and delayed readings, this open-element GM-style sensor provides the engine management system with near-instantaneous air temperature data.

This sensor is an essential upgrade for vehicles running standalone ECUs or speed-density conversions. By delivering more accurate intake charge temperatures to the ECU, it allows for more precise fueling and ignition timing adjustments, especially in forced induction setups where temperatures can fluctuate rapidly.

• Fast Response: Open-element thermistor design for rapid temperature sampling and minimal lag.
• Universal Application: Standard GM-style scaling and physical footprint for easy integration into custom intake piping.
• Performance Tuning: Ideal for standalone engine management systems requiring high-resolution temperature data.
• Manufacturer Part Number: TS-ES-IAT-GM

Fits 2002-2005 Honda Civic Si (EP3).

The Torque Solution Billet Aluminum Engine Mount is designed to replace the compliant factory rubber mount, significantly reducing engine movement and drivetrain slop. By stabilizing the powertrain, this mount improves throttle response, sharpens gear engagement, and helps eliminate wheel hop during aggressive launches. It is an essential upgrade for EP3 owners looking to maximize power transfer to the wheels.

Each mount is precision CNC machined from high-grade billet aluminum for maximum strength and weight savings compared to cast alternatives. Designed to bolt directly into the factory mounting locations, it provides a secure fitment that withstands the rigors of high-performance driving while maintaining the alignment of your drivetrain components.

• CNC machined billet aluminum construction
• Eliminates excessive engine movement and wheel hop
• Improves power transfer and shifting precision
• Direct-fit replacement for factory mount
• Manufacturer Part Number: TS-EP3-001

Fits 2002-2006 Acura RSX Base and Type-S.

The Torque Solution Exhaust Mount Kit is designed to eliminate excessive exhaust movement and prevent the system from rattling against the chassis or heat shields. By replacing the compliant factory rubber hangers with high-durometer polyurethane mounts, this kit ensures your exhaust remains properly aligned and secure, even during aggressive driving or on vehicles equipped with heavier, large-diameter aftermarket piping.

• Direct replacement for OEM rubber exhaust hangers
• Manufactured from high-grade polyurethane for superior stiffness and durability
• Reduces exhaust sway and prevents contact with the underbody
• Engineered to withstand high heat and environmental degradation
• Manufacturer Part Number: TS-EHK-RSX

Fits 2000-2009 Honda S2000 (Base and CR).

The Torque Solution Exhaust Mount Kit (TS-EH-S2K) is engineered to eliminate the excessive movement often found with aged or soft factory rubber hangers. By providing a more stable mounting point, these high-density mounts prevent your exhaust system from vibrating, rattling against the chassis, or misaligning within the rear bumper cutouts. This kit is a direct replacement for the original equipment, offering a more secure fitment for both stock and aftermarket exhaust systems.

• Direct replacement for OE rubber exhaust hangers
• Reduces exhaust play and unwanted movement
• High-density construction resists sagging and wear
• Prevents exhaust rattles and bumper contact
• Manufacturer Part Number: TS-EH-S2K

The Torque Solution Exhaust Mount (TS-EH-M12) provides a high-performance alternative to soft factory rubber hangers on select Mitsubishi models. By upgrading to a high-durometer polyurethane mount, you effectively eliminate excessive exhaust movement and sway that can lead to rattling or contact between the exhaust tips and the rear bumper during aggressive driving or high-load conditions.

• Direct replacement for compliant OEM rubber exhaust hangers
• Constructed from high-grade polyurethane for maximum durability and heat resistance
• Minimizes exhaust system vibration and movement
• Ensures consistent exhaust tip alignment and prevents chassis contact
• Manufacturer Part Number: TS-EH-M12

The Torque Solution Exhaust Mount (TS-EH-M11) is engineered to provide a secure mounting solution for your vehicle's exhaust system. By replacing soft factory rubber hangers, this mount significantly reduces excessive exhaust movement, preventing the system from rattling against the chassis or misaligning the exhaust tips during spirited driving.

• Direct replacement for original equipment exhaust hangers
• Minimizes system vibration and sway for improved clearance
• Designed to withstand the thermal and physical stresses of performance applications
• Manufacturer Part Number: TS-EH-M11

Fits 2008-2015 Mitsubishi Lancer Evolution X models, including GSR, MR, MR Touring, and Final Edition.

The Torque Solution Exhaust Mount Kit (MPN: TS-EH-EVOXS) is engineered to replace the soft factory rubber hangers that allow excessive exhaust movement. By upgrading to these stiffer mounts, you stabilize your exhaust system, ensuring it stays properly aligned and preventing the piping from contacting the chassis or bumper during aggressive cornering or high-load conditions. These are a direct-fit solution for enthusiasts looking to eliminate rattles and improve the overall rigidity of both OEM and aftermarket exhaust setups.

• Reduces exhaust movement and vibration
• Direct replacement for original factory hangers
• Designed for high-performance street and track use
• Includes all necessary mounts for a complete installation
• Manufacturer Part Number: TS-EH-EVOXS

Eliminate excessive exhaust movement and prevent rattling with the Torque Solution Exhaust Mount Kit for the 2008-2015 Mitsubishi Lancer Evolution X. These high-performance hangers are engineered to replace the soft factory rubber mounts that often sag under the weight of aftermarket exhaust systems. By stiffening the exhaust path, this kit reduces stress on the exhaust manifold and downpipe while ensuring consistent tip alignment.

• Replaces worn or soft OE rubber exhaust hangers
• Constructed from high-durometer polyurethane for increased longevity and rigidity
• Reduces exhaust vibration and lateral sway during aggressive driving
• Direct fit for street and track applications
• Manufacturer Part Number: TS-EH-EVOX

Fitment: Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, and Final Edition).

Fits select 2016+ Honda Civic and Civic SI Coupe models.

The Torque Solution Exhaust Hanger Mount Kit (TS-EH-310) replaces the flexible factory mounts to stabilize your exhaust system. Reducing excessive exhaust movement is critical for preventing chassis rattles, protecting mid-pipe clearance, and keeping exhaust tips properly centered within the rear bumper cutouts. This direct-fit kit is designed specifically for the Civic Coupe chassis to provide a more rigid mounting solution than standard OE components, ensuring your exhaust remains secure during spirited driving.

• Direct replacement for factory rubber exhaust hangers
• Specifically engineered for 2016+ Honda Civic Coupe chassis
• Reduces exhaust sway and vibration to prevent body contact
• Maintains consistent exhaust tip alignment
• Manufacturer Part Number: TS-EH-310

Fits 2016+ Honda Civic Sedan models, including the Civic Si Sedan (Sedan only).

The Torque Solution Exhaust Hanger Mount Kit (TS-EH-309) is engineered to replace soft factory rubber hangers that allow for excessive exhaust movement, vibration, and sagging. By utilizing a high-durability, stiffer compound, these mounts secure your exhaust system firmly in place, ensuring consistent clearance from the chassis and preventing annoying rattles.

• Reduces exhaust movement and system vibration
• Eliminates exhaust rattle and sagging issues
• Direct replacement for OEM rubber hangers
• Designed specifically for Sedan chassis configurations
• Manufacturer Part Number: TS-EH-309

This kit is a recommended upgrade for vehicles equipped with larger, heavier aftermarket exhaust systems where factory mounts often fail to provide adequate support.

Fits select 2012-2015 Honda Civic models, including DX, EX, EX-L, GX, HF, Hybrid, LX, Natural Gas, SE, and Si.

The Torque Solution Exhaust Mount Kit (TS-EH-303) is designed to stabilize your exhaust system by replacing the soft factory rubber hangers. These high-strength mounts minimize exhaust movement and vibration, preventing the piping from contacting the chassis or bodywork during hard cornering and acceleration.

• Direct replacement for OE rubber exhaust hangers
• Reduces exhaust sway and eliminates potential rattling
• Designed for increased durability under high heat conditions
• Manufacturer Part Number: TS-EH-303

Fits 1994-2001 Acura Integra GS, GS-R, LS, RS, Special Edition, and Type R.

The Torque Solution Exhaust Mount Kit is an essential upgrade for any 3rd generation Integra enthusiast looking to eliminate exhaust movement and sagging. Factory rubber hangers are prone to softening over time, which leads to excessive vibration, chassis rattling, and misaligned exhaust tips that can melt rear bumper plastics. These high-performance mounts provide a much firmer hold than OE components, ensuring your exhaust system stays exactly where it belongs during spirited driving or track use.

Designed as a direct replacement for the original hangers, this kit installs onto factory mounting points with no modification required. Whether you are running a stock setup or a heavy aftermarket cat-back system, these mounts offer the durability and stiffness needed to maintain proper clearance and reduce stress on exhaust welds and hangers.

• Eliminates excessive exhaust movement and vibration
• Prevents exhaust tips from rattling against the chassis or bumper
• Direct-fit replacement for factory rubber hangers
• Ideal for both stock and high-performance aftermarket exhausts
• Manufacturer Part Number: TS-EH-302

Fits 2006-2011 Honda Civic DX, EX, EX-L, GX, Hybrid, LX, LX-S, and Si models.

Eliminate excessive exhaust sway and prevent rattling with the Torque Solution Exhaust Mount Kit. Factory rubber hangers are often too pliable, allowing the exhaust system to move during aggressive cornering or shift under heavy load. This movement can lead to the exhaust contacting the chassis or causing damage to bumper cutouts.

These high-durometer polyurethane hangers provide a significantly stiffer connection than original equipment (OE) rubber. They are engineered to withstand high temperatures and resist degradation from road salts and oils, ensuring your exhaust remains properly aligned and secure for the long term.

• Direct replacement for soft factory rubber mounts
• Reduces exhaust vibration and movement
• Constructed from high-grade polyurethane material
• Designed for high-heat resistance and durability
• Manufacturer Part Number: TS-EH-301

Fits 1992-2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si, VX, and Value Package).

The Torque Solution Exhaust Mount Kit (TS-EH-300) is designed to replace the compliant factory rubber hangers on your vehicle. These mounts provide a more secure mounting solution for your exhaust system by minimizing excessive movement and vibration. This kit helps prevent the exhaust from contacting other chassis components or rattling during operation, which is common in both stock and modified configurations.

• Direct replacement for original equipment exhaust hangers
• Significantly reduces exhaust sway and vibration
• Improves exhaust system stability and alignment
• Complete kit tailored for the 1992-2000 Honda Civic chassis
• Manufacturer Part Number: TS-EH-300

Fits select 2013-2017 Scion FR-S, Subaru BRZ, and Toyota 86.

The Torque Solution Exhaust Mount Kit (TS-EH-203) is engineered to replace soft factory rubber hangers that allow for excessive exhaust movement. By upgrading to these high-durability mounts, you eliminate the common rattling and chassis contact associated with performance exhaust systems, especially during aggressive driving or track use. These mounts ensure your exhaust tips remain centered and properly aligned while significantly reducing vibration transfer.

• Direct replacement for OEM exhaust hangers
• Reduces exhaust system sway and movement
• Eliminates exhaust-to-chassis rattling and clearance issues
• Durable construction designed to withstand high heat and road grime
• Manufacturer Part Number: TS-EH-203

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86.

The Torque Solution Exhaust Mount Kit (TS-EH-202) replaces your soft, factory rubber hangers to significantly reduce exhaust system movement. Excessive sway can lead to rattling against the chassis or heat damage to the rear bumper; this kit secures the exhaust to maintain proper alignment during aggressive driving.

• Replaces worn or soft factory exhaust hangers
• Reduces exhaust vibration and drivetrain movement
• Prevents exhaust-to-chassis contact
• Designed for long-term durability under high heat
• Manufacturer Part Number: TS-EH-202

The Torque Solution Exhaust Mount Kit (TS-EH-201) is engineered to eliminate excessive exhaust movement and prevent hanger sag on the 2011-2013 Scion tC. By replacing the soft factory rubber mounts, this kit provides a more stable connection to the chassis, ensuring your exhaust system stays properly aligned and reducing the risk of the piping contacting the bumper or subframe during spirited driving.

These mounts are a direct replacement for the original equipment, offering increased durability and a firmer hold that is essential for both factory setups and heavier aftermarket exhaust systems. This kit helps maintain consistent clearances and reduces drone caused by vibrating exhaust components.

• Fits 2011-2013 Scion tC Base
• Reduces exhaust movement and prevents system sag
• Direct replacement for factory rubber hangers
• Maintains proper exhaust tip alignment
• Manufacturer Part Number: TS-EH-201

The Torque Solution Exhaust Mount (TS-EH-012L4) is a high-performance upgrade designed to replace soft, sagging factory rubber hangers. Engineered for enthusiasts with aftermarket exhaust systems or those experiencing excessive tailpipe movement, these mounts are constructed from high-grade 75A durometer polyurethane. This material provides significantly more rigidity than OEM rubber, effectively eliminating exhaust swing and preventing the system from contacting the chassis or bodywork during high-load driving.

This "Long" version features an extended length to provide additional clearance for custom exhaust setups or to lower the piping away from heat-sensitive bumpers and body panels. Unlike standard rubber, this polyurethane compound is resistant to road chemicals and high heat, ensuring it will not crack or deteriorate over time.

• Eliminates exhaust movement and vibration-induced rattles
• Constructed from high-grade 75A durometer polyurethane
• Extended 12mm length for improved fitment and clearance
• Direct replacement for vehicles utilizing 12mm hanger rods
• Manufacturer Part Number: TS-EH-012L4

Fits 2005-2006 Mitsubishi Lancer Evolution (MR, RS, SE).

The Torque Solution Exhaust Mount Kit (TS-EH-004) is engineered to eliminate the excessive movement and vibration common with soft, factory-issued rubber hangers. By replacing worn OE mounts with these high-performance components, you ensure your exhaust system stays securely aligned, even under high-load or track conditions. This stabilization protects your vehicle by preventing the tailpipe from rattling against the chassis or shifting into the rear bumper trim.

• Direct replacement for factory rubber hangers
• Significant reduction in exhaust movement and sway
• Protects bumper and chassis from exhaust contact and heat damage
• Designed to maintain proper exhaust alignment
• Manufacturer Part Number: TS-EH-004

The Torque Solution Multi-Layer Stainless (MLS) Gasket provides a high-performance sealing solution for the critical connection between the turbocharger discharge and the J-pipe. Designed specifically for Subaru FA20 turbocharged engines, this gasket replaces prone-to-fail composite gaskets with a durable, multi-layer steel design capable of withstanding the extreme thermal cycling and high exhaust pressures of a modified exhaust system.

Constructed from high-grade stainless steel, this gasket ensures a precision fit and a leak-free exhaust path. Maintaining a proper seal at this junction is essential for preserving boost response and preventing exhaust gas leaks into the engine bay or cabin. Whether you are installing an aftermarket J-pipe or performing routine maintenance, this MLS gasket offers the reliability needed for street and track use.

• Multi-layer stainless steel (MLS) construction for maximum durability
• Engineered specifically for the Subaru FA20 Turbo to J-Pipe flange
• High-heat resistance prevents gasket blowout and degradation
• Precision-stamped for an exact fit to factory or aftermarket flanges
• Manufacturer Part Number: TS-EG-686

Ensure a leak-free seal between your turbocharger and downpipe with the Torque Solution Multi-Layer Stainless Steel (MLS) Gasket. Specifically engineered for EJ-series turbochargers, this gasket replaces worn or failure-prone factory gaskets to maintain maximum exhaust flow and consistent boost pressure.

Constructed from high-grade stainless steel in a multi-layer design, this component is built to withstand the extreme thermal cycles and high pressures common in turbocharged applications. Unlike standard composite gaskets that can blow out or degrade under stress, the MLS construction provides a resilient, long-lasting seal for high-performance builds.

• Part Type: Turbocharger to Downpipe Gasket
• Material: Multi-Layer Stainless Steel (MLS)
• Direct replacement for EJ-series turbo outlet flanges
• Designed for high-heat and high-pressure environments
• Manufacturer Part Number: TS-EG-672

Fits 1995-1999 Mitsubishi Eclipse (GST/GSX) and Eagle Talon (TSi) models.

Torque Solution DSM Rear Subframe Bushings are designed to eliminate the excessive movement and compliance found in the factory rubber bushings. By replacing the worn original equipment with these high-performance units, you provide a rigid connection between the rear subframe and the chassis. This upgrade is essential for maintaining consistent suspension geometry, reducing wheel hop during launches, and improving overall handling precision in 2G DSM platforms.

• Eliminates subframe-to-chassis play for more predictable handling
• Helps maintain accurate rear-end alignment under heavy cornering loads
• Reduces drivetrain movement to improve power transfer and traction
• Engineered for a direct fit in factory mounting locations
• Manufacturer Part Number: TS-EC-300

Fits 2003-2005 Dodge Neon SRT-4.

The Torque Solution Billet Aluminum Engine Mount Kit is designed to eliminate engine movement and significantly reduce wheel hop on the 2003-2005 Dodge Neon SRT-4. By replacing the soft factory rubber mounts with these high-strength components, you ensure more power reaches the ground while improving shifting precision and overall drivetrain response. These mounts are CNC machined from high-grade 6061 billet aluminum for maximum durability and weight savings compared to cast or stamped alternatives.

• CNC machined 6061 billet aluminum construction
• Reduces wheel hop and engine rotation
• Improves power transfer and shifting feel
• Manufacturer Part Number: TS-DNSRT-123

Fits 2003-2005 Dodge Neon SRT-4.

Eliminate excessive drivetrain movement and improve power delivery with the Torque Solution Billet Aluminum Transmission Mount. Designed specifically for the high-torque SRT-4 platform, this mount replaces the soft factory rubber unit to significantly reduce wheel hop and provides a more connected feel during aggressive shifting and hard acceleration.

Each mount is CNC machined from high-quality 6061-billet aluminum for maximum strength and durability. By minimizing transmission deflection, this upgrade ensures more power makes it to the ground and helps maintain proper drivetrain alignment under load, preventing the missed shifts common with worn or flexible OE mounts.

• CNC machined 6061-billet aluminum construction
• Reduces wheel hop and drivetrain slop
• Improves shifting precision and power transfer
• Torture tested for long-term durability
• Manufacturer Part Number: TS-DNSRT-003

Fits 2005-2013 Chevrolet Corvette C6 models including Base, Grand Sport, Z06, and ZR1.

Torque Solution Billet Transmission Mounts are designed to eliminate excessive drivetrain movement and improve power transfer in high-performance C6 applications. By replacing the compliant factory rubber mounts with rigid billet aluminum components, these mounts minimize transmission twist and help maintain proper alignment under heavy load. This results in significantly improved shifting precision, reduced wheel hop, and a more direct throttle response during aggressive street or track driving.

• High-strength 6061-T6 billet aluminum construction
• Reduces drivetrain slop for more consistent gear engagement
• Direct replacement for worn or soft factory mounts
• Engineered to withstand high horsepower and torque levels
• Manufacturer Part Number: TS-CV-002