Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Your cart
-
0-9
-
A
-
B
-
R
-
S
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Turbosmart
Welcome to the Turbosmart collection. Whether you're building a high-horsepower race car or improving the drivability of your turbocharged street machine, Turbosmart has the boost control components you need. Founded in Australia, Turbosmart designs and manufactures a complete lineup of turbo accessories, from blow-off valves and wastegates to electronic boost controllers and fuel pressure regulators.
Every product is developed with a focus on responsiveness, durability, and precise control. The range includes both vacuum-operated and electronic solutions, with options suited for mild upgrades up to extreme competition use.
Explore the collection by category:
- Blow-Off Valves: Dual-port, Supersonic, Kompact, and more – relieve compressor surge and keep your turbo spooled.
- Wastegates: Internal and external gates in multiple sizes for managing boost pressure effectively.
- Boost Controllers: Manual and electronic solutions, including the e-Boost series, for fine-tuning boost levels.
- Fuel Pressure Regulators: Maintain consistent fuel delivery under varying manifold pressures.
- Oil Management: Catch cans, oil drain kits, and turbo oil feed accessories to keep your system clean.
Each Turbosmart part is designed to integrate into factory or aftermarket turbo setups, backed by decades of motorsport testing. Use the filters to find the correct fit for your vehicle, or browse by part type to start your upgrade.
504 products
504 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The Turbosmart PSG50 Pneumatic Straight Gate (TS-0565-1762) is a high-flow external wastegate designed to provide superior boost control through a unique butterfly-style valve architecture. Unlike traditional poppet-style wastegates, the Straight Gate design offers a more linear flow path, significantly increasing flow capacity and reducing turbulence in high-performance exhaust systems.
This pneumatic version is controlled via standard air pressure signals and comes pre-fitted with a 6psi spring, making it an ideal choice for lower boost thresholds or as a base for electronic boost controllers. The black finish provides a discrete, professional look in the engine bay while the robust construction ensures reliable operation under extreme thermal loads.
- Manufacturer Part Number: TS-0565-1762
- Series: PSG50 Pneumatic Straight Gate
- Spring Rating: 6psi
- Actuation: Pneumatic
- Finish: Black Anodized
- Design: High-flow butterfly valve
The Turbosmart PSG50V Pneumatic Straight Gate (Vacuum) represents a shift in boost control technology. Unlike traditional poppet-style wastegates, the PSG50V utilizes a butterfly-style valve to provide a linear, straight-through exhaust flow path. This design significantly increases flow capacity while maintaining precise control, making it an ideal choice for high-horsepower turbocharged applications where space and flow efficiency are critical.
This vacuum-actuated model is engineered for reliability in extreme environments, featuring high-temperature materials and a durable black anodized finish. The straight-gate configuration allows for a smaller footprint without sacrificing the flow characteristics of a much larger traditional gate. This unit comes pre-calibrated with a 6in Hg spring for precise vacuum-based actuation.
- Manufacturer Part Number: TS-0565-1212
- Valve Type: Straight Gate butterfly valve
- Actuation: Pneumatic Vacuum
- Spring Pressure: 6in Hg
- Finish: Black Anodized
- Compact design with superior flow-to-size ratio
- Linear control for predictable boost management
The Turbosmart Electronic StraightGate ESG50 (TS-0565-1002) is a high-flow butterfly-style external wastegate engineered for uncompromising boost control. Unlike traditional poppet-valve designs, the ESG50 features a zero-offset straight-through valve that allows for significantly higher flow capacity within a compact 50mm footprint, providing a more linear flow profile across the valve's entire range of motion.
This system is fully electronically actuated, eliminating the need for reference hoses, diaphragms, or springs. By removing pneumatic control from the equation, you eliminate issues like diaphragm failure or spring pressure limitations. The high-torque electronic actuator provides precise valve positioning and fast response times, allowing for complex boost strategies and stable performance regardless of exhaust backpressure.
- Manufacturer Part Number: TS-0565-1002
- Valve Diameter: 50mm high-flow butterfly valve
- Actuation Type: Full electronic control (no vacuum/boost lines required)
- Construction: High-temperature materials for extreme exhaust environments
- Control: High-resolution electronic positioning for closed-loop boost management
The Turbosmart PSG40 Pneumatic StraightGate is a revolutionary 40mm external wastegate designed for maximum flow efficiency and precise boost control. Unlike traditional poppet-style valves, the StraightGate utilizes a butterfly-style valve architecture that provides a linear flow path, significantly reducing exhaust backpressure and allowing for massive flow capacity in a compact, easy-to-package footprint.
- Manufacturer Part Number: TS-0563-1762
- Series: PSG40 Pneumatic StraightGate
- Valve Diameter: 40mm
- Spring Pressure: 6psi base pressure
- Finish: Black Anodized
- Actuation: Pneumatic control
Built to withstand extreme thermal environments, this wastegate is ideal for high-performance turbocharged applications where space is limited but flow requirements are high. The pneumatic actuator ensures rapid response and reliable operation under heavy track or street use. This unit replaces traditional wastegates with a more efficient, high-flow alternative that simplifies manifold design.
The Turbosmart ESG40 Electronic StraightGate provides unparalleled boost control by replacing traditional pneumatic actuation with a high-torque stepper motor and a high-flow butterfly valve. This design eliminates the limitations of springs and diaphragms, allowing for a massive tuning window and precise closed-loop control through your ECU without the need for manual spring swaps or reference lines.
Built for high-performance forced induction systems, the ESG40 features a 40mm effective diameter that offers superior flow capacity compared to conventional poppet-style wastegates of the same size. The straight-through design minimizes exhaust turbulence, ensuring stable boost management even at extreme flow rates and high exhaust temperatures.
- Manufacturer Part Number: TS-0563-1002
- Valve Style: 40mm high-flow butterfly valve
- Actuation Type: Fully electronic stepper motor
- Finish: Black anodized and heat-resistant coating
- Control: Infinite adjustment capability for boost-by-gear or boost-by-RPM strategies
- Durability: Eliminates diaphragm failure points and thermal sensitivity common in pneumatic gates
The Turbosmart GenV WG60 Outlet V-Band Clamp is a dedicated replacement component engineered for the GenV Power-Gate60 external wastegate range. Designed to provide a secure, high-pressure seal between the wastegate body and the discharge piping, this clamp is critical for maintaining exhaust system integrity and consistent boost control.
- Fits Turbosmart GenV WG60 (60mm) external wastegates
- Heavy-duty stainless steel construction for superior thermal stability and corrosion resistance
- Equipped with a high-tensile fine-thread bolt and nut for precise torque application
- Ensures a leak-free connection at the wastegate outlet flange
- Manufacturer Part Number: TS-0555-3004
The Turbosmart GenV WG60 Inlet V-Band Clamp is a precision-engineered replacement component for the inlet side of the GenV external wastegate range. This clamp ensures a secure, leak-free connection between the wastegate and the exhaust manifold or adapter, maintaining critical boost control integrity.
Constructed from high-grade stainless steel to withstand extreme thermal cycling and vibration, this clamp (MPN: TS-0555-3003) is built for the rigors of high-performance turbocharged applications. The assembly includes a fine-thread bolt and nut, allowing for precise tensioning and a consistent seal across the flange diameter.
- Specifically designed for the Turbosmart GenV WG60 Wastegate series
- Positions on the wastegate inlet flange
- High-strength stainless steel construction for corrosion resistance
- Includes fine-thread mounting hardware for secure fastening
- Genuine Turbosmart component (Part Number: TS-0555-3003)
Ensure your external wastegate maintains a perfect seal with the Turbosmart GenV WG60 Valve Seat. Designed specifically as a direct replacement component for the Power-Gate 60mm series, this valve seat provides a precision-engineered base for the wastegate valve to rest against when closed, preventing boost leaks and ensuring consistent manifold pressure control.
Manufactured using advanced CNC machining technology, this seat is built to withstand the extreme thermal cycling and high-velocity exhaust gas flow typical of high-horsepower turbocharged applications. Replacing a worn or pitted valve seat is critical during a wastegate service to restore flow efficiency and prevent exhaust bypass when the valve is seated.
- Fits Turbosmart GenV WG60 Power-Gate 60mm external wastegates
- Precision CNC machined for optimal fitment and sealing integrity
- Essential replacement part for maintaining boost response and control
- Direct replacement for the original valve seat
- Manufacturer Part Number: TS-0555-3001
The Turbosmart Gen V Power-Gate 60 (eWG60) is a 60mm fully electronic external wastegate that delivers precise boost control without the limitations of traditional pneumatic systems. Built on the race-proven Gen V architecture, this electronic actuator eliminates the need for reference lines, CO2 tanks, or solenoid valves, allowing for infinitely adjustable valve positioning via your ECU.
Engineered for extreme thermal environments, the eWG60 features a high-temperature 347 stainless steel body and Nitronic 60 valve guides. To ensure electronics longevity in high-heat engine bays, the actuator is liquid-cooled. Integrated sensors provide real-time feedback, including an analog actuator temperature sensor and dual (analog and PWM) valve position sensors for maximum tuning accuracy.
- Manufacturer Part Number: TS-0555-1502
- Valve Diameter: 60mm
- Actuation: Fully electronic liquid-cooled actuator
- Housing Material: High-temp 347 Stainless Steel
- Valve Guide: Nitronic 60
- Sensors: Onboard Analog (0-5V) Actuator Temp and Digital (PWM)/Analog (0-5V) Position sensors
- Mounting: Strap-type V-band clamps
- Adjustment: User-adjustable actuator position
The Turbosmart GenV WG60 Powergate 60 is a professional-grade 60mm external wastegate engineered for superior flow and thermal performance. This Compressed Gas variant is specifically designed for use with CO2 or nitrogen-regulated boost control systems, providing the extreme response and stability required in high-horsepower drag and circuit racing. The GenV architecture features a modular design, allowing for a 360-degree rotatable actuator cap for easy routing of reference lines in tight engine bays.
- 60mm valve size for maximum exhaust flow and boost stability
- Optimized for compressed gas (CO2/Nitrogen) control systems
- GenV modular construction for versatile actuator positioning
- Liquid-cooled actuator housing for thermal management in high-heat environments
- Equipped with a 7psi base spring and 1/8" NPT ports
- Black anodized finish for corrosion resistance and aesthetics
- Manufacturer Part Number: TS-0555-1242
The Turbosmart Gen V Power-Gate 60 CG (Compressed Gas) is a high-performance 60mm external wastegate engineered for advanced boost control strategies. This CG-specific model is designed for applications that actively bias the top chamber with increased pressure to achieve a massive boost bandwidth, making it ideal for CO2 drag racing or compressed air systems. It features a specialized inverted diaphragm assembly built to handle large pressure differentials and high-pressure air sources.
- 60mm V-band inlet and outlet for secure, leak-free installation.
- High-temperature 347 stainless steel body with a Nitronic 60 valve guide for superior thermal resistance.
- Includes a 5psi base spring made from 17-7 PH stainless steel.
- Rotatable actuator housing allows for 360-degree positioning of pressure ports.
- Optional liquid cooling ports for managing extreme heat soak in endurance or high-heat environments.
- Equipped with strap-type V-band clamps for reliable retention under pressure.
- Manufacturer Part Number: TS-0555-1202
The Turbosmart WG60 Gen V Power-Gate 60 is a high-performance 60mm external wastegate designed for high-horsepower turbocharged applications where maximum exhaust flow and precise boost control are critical. As part of the Gen V architecture, this wastegate offers superior thermal performance and modularity, making it an industry standard for professional tuners and builders.
This "Sleeper" edition features a discreet black-anodized finish for a low-profile look in the engine bay. The unit comes pre-configured with a 14psi base spring pressure and utilizes a modular actuator housing, which allows for 360-degree rotation to ensure clearance around manifolds and chassis components. The wastegate is built to withstand extreme heat, featuring a stainless steel valve and a silicone-reinforced Nomex diaphragm.
- Manufacturer Part Number: TS-0555-1015
- 60mm valve diameter for high-flow exhaust bypass
- 14psi base spring pressure pre-installed
- 360-degree rotating actuator housing for flexible mounting
- High-grade stainless steel valve and hardware for durability
- Silicone-reinforced Nomex diaphragm for high-temperature reliability
- Includes V-band clamps and weld flanges for installation
The Turbosmart Gen-V WG60 Power-Gate 60 is a motorsport-proven 60mm external wastegate designed for high-horsepower applications requiring maximum flow. As the largest poppet-style wastegate in the Turbosmart Gen-V range, it delivers industry-leading flow capacity and thermal performance. This unit is built to withstand extreme temperatures and fatigue, making it a reliable choice for professional racing and high-performance street builds.
- Precision Engineering: Features a high-temperature 347 stainless steel body and a Nitronic 60 valve guide for superior longevity.
- Modular Design: The actuator housing is fully rotatable/clock-able, allowing for 360-degree positioning to clear complex engine bay configurations.
- Thermal Management: Includes optional liquid actuator cooling ports for use in high-heat environments.
- Reliable Springs: Equipped with 17-7 PH stainless steel springs for consistent 14psi boost control.
- Installation: Designed for 60mm V-band fitment and includes strap-type V-band clamps for a secure, leak-free seal.
The TS-0555-1014 also supports an optional position sensor (sold separately) for data logging and precise boost management.
The Turbosmart GenV WG60 Power-Gate 60 is a motorsport-proven 60mm external wastegate engineered for high-horsepower turbocharged applications requiring maximum flow. As the largest poppet-style wastegate in the Turbosmart GenV range, it delivers exceptional flow performance and thermal resistance for precise boost control under extreme exhaust temperatures.
- High-flow 60mm bore design for superior boost management
- 347 Stainless Steel body and Nitronic 60 valve guide for fatigue resistance
- 17-7 PH Stainless Steel springs pre-configured for 14psi base pressure
- Rotatable actuator housing allows for easy vacuum port positioning in tight engine bays
- Integrated liquid cooling ports for use in extreme thermal environments
- Secure mounting via included strap-type V-band clamps
- Provision for optional wastegate position sensor (sold separately)
- Manufacturer Part Number: TS-0555-1013
The Turbosmart GenV PowerGate60 (TS-0555-1012) is a motorsport-grade 60mm external wastegate engineered for extreme flow and precise boost control. As the largest poppet-style wastegate in the Turbosmart lineup, the WG60 is designed to manage high-horsepower applications where thermal management and fatigue resistance are critical.
Built for the most demanding environments, this wastegate features a high-temperature 347 stainless steel body and a Nitronic 60 valve guide. The modular actuator housing is fully rotatable, allowing for 360-degree positioning of the vacuum ports to clear complex manifold plumbing. This unit comes pre-loaded with a 14psi spring configuration and includes strap-type V-band clamps for a secure, leak-free seal.
- 60mm valve diameter for maximum flow performance
- High-temperature 347 stainless steel body construction
- 17-7 PH stainless steel springs for consistent tension
- Nitronic 60 valve guide for superior wear resistance
- Rotatable actuator housing simplifies vacuum line routing
- Integrated cooling fins with optional liquid cooling ports
- Compatible with optional wastegate position sensors
- Includes inlet and outlet strap-type V-band clamps
- Manufacturer Part Number: TS-0555-1012
The Turbosmart Gen-V WG60 Power-Gate 60 is a high-performance, 60mm external wastegate engineered for maximum flow and thermal stability in demanding motorsport environments. As the largest poppet-style wastegate in the Gen-V range, the Power-Gate 60 provides the flow capacity required for high-horsepower turbochargers and precise boost control.
Constructed with a 347 stainless steel body and a Nitronic 60 valve guide, this wastegate is built to withstand extreme exhaust temperatures and mechanical fatigue. The rotatable actuator housing allows for 360-degree clocking, ensuring reference ports are easily accessible even in tight engine bays. This unit (TS-0555-1011) comes pre-fitted with a 14psi spring and features integrated liquid cooling ports for applications with high thermal loads.
- Class-leading CFD-validated flow performance for consistent boost management
- High-temperature 347 Stainless Steel body for superior longevity
- Nitronic 60 valve guide and 17-7 PH Stainless Steel springs
- Rotatable actuator housing simplifies vacuum line routing
- Integrated liquid cooling ports for extreme duty cycles
- 60mm V-band fitment with included strap-type clamps
- Manufacturer Part Number: TS-0555-1011
The Turbosmart Gen V WG60 Power-Gate 60 is a motorsport-proven 60mm external wastegate designed for high-flow applications requiring precise boost control. As the largest wastegate in the Gen V lineup, it features a poppet-style design with industry-leading CFD-validated flow performance. Engineered for extreme environments, the WG60 utilizes a 347 stainless steel body and Nitronic 60 valve guides to provide exceptional thermal performance and fatigue resistance.
This modular wastegate allows for extensive user configurability, featuring a rotatable actuator housing for easy installation in tight engine bays and optional liquid cooling ports for high-heat endurance. The unit comes pre-configured with 7psi spring pressure and includes strap-type V-band clamps for secure 60mm fitment.
- 60mm V-band fitment for high-volume exhaust flow
- Constructed with a high-temp 347 stainless steel body
- Nitronic 60 valve guide for superior longevity
- 17-7 PH stainless steel springs (7psi base pressure)
- Clock-able actuator housing for flexible port routing
- Integrated liquid cooling ports for thermal management
- Compatible with optional position sensor (sold separately)
- Manufacturer Part Number: TS-0555-1002
The Turbosmart GenV WG50 Outlet V-Band Clamp is a precision-engineered replacement component for the GenV Pro-Gate 50 external wastegate range. This clamp is designed to withstand extreme thermal cycling while maintaining a leak-free seal between the wastegate outlet flange and the dump pipe.
- Manufactured from high-grade stainless steel for superior corrosion resistance and durability in high-heat environments.
- Features a fine-thread bolt and nut assembly for precise tensioning and a secure, vibration-resistant fit.
- Direct replacement hardware for the Turbosmart GenV WG50 (50mm) external wastegate outlet.
- Manufacturer Part Number: TS-0554-3004
The Turbosmart GenV WG50 Inlet V-Band Clamp is a precision-engineered replacement component for the ProGate50 external wastegate series. Designed to secure the wastegate unit to the exhaust manifold inlet flange, this clamp provides the necessary clamping force to maintain a leak-free seal under the extreme pressures and temperatures of a high-performance exhaust system.
Fabricated from durable stainless steel, this V-band is built to withstand repeated heat cycling without compromising structural integrity or corrosion resistance. The assembly includes specialized fine-thread hardware for precise tensioning, ensuring the wastegate remains securely seated even in high-vibration racing environments.
- Fits Turbosmart GenV WG50 (ProGate 50mm) external wastegates
- High-grade stainless steel construction for maximum heat resistance
- Includes dedicated fine-thread bolt and nut for reliable fastening
- Ensures airtight sealing between the wastegate and inlet flange
- Genuine Turbosmart replacement hardware: TS-0554-3003
The Turbosmart GenV WG50 Valve Seat is a precision-engineered replacement component specifically for the Pro-Gate 50mm external wastegate series. Designed to maintain a positive seal and optimize exhaust flow, this valve seat ensures your wastegate operates at peak efficiency under high-heat and high-pressure conditions.
This genuine Turbosmart spare part is manufactured using advanced CNC machining to meet tight tolerances, providing the rigidity and durability required for high-performance turbocharged applications. Whether performing routine maintenance or rebuilding a GenV Pro-Gate 50, installing a fresh seat is essential for preventing exhaust leaks and maintaining consistent boost control.
- Direct replacement for Turbosmart GenV WG50 Pro-Gate 50mm external wastegates
- Precision CNC-machined for optimal sealing and fitment
- High-grade construction for extreme thermal resistance and durability
- Manufacturer Part Number: TS-0554-3001
The Turbosmart GenV ProGate50 Electronic External Wastegate (TS-0554-1502) offers ultimate boost control by replacing traditional pneumatic diaphragms with a high-torque internal electric motor. Built on the industry-leading GenV architecture, this 50mm wastegate eliminates the need for compressed air, boost control solenoids, or complex vacuum plumbing, providing precise valve positioning regardless of exhaust drive pressure.
- 50mm Flow Capacity: Optimized valve geometry and flow path for superior exhaust bypass and boost stability.
- Electronic Actuation: High-speed motor allows for infinitely adjustable boost strategies through your ECU without changing springs.
- Extreme Thermal Resistance: Engineered to withstand high-performance exhaust temperatures while maintaining actuator reliability.
- V-Band Compatibility: Utilizes standard 50mm V-band inlet and outlet flanges for secure, leak-free mounting.
- Simplified Setup: Eliminates the risk of boost leaks or melted vacuum lines in high-heat engine bays.
- Manufacturer Part Number: TS-0554-1502
The Turbosmart Gen-V WG50 Pro-Gate 50 CG (Compressed Gas) is a 50mm external wastegate engineered for advanced boost control strategies that utilize top-chamber pressure biasing. Specifically designed for CO2 drag racing or compressed air setups, this wastegate enables an exceptionally wide boost bandwidth. It features an inverted diaphragm architecture optimized for high-pressure systems and large pressure differentials where standard wastegates may reach their limit.
Built for extreme duty, the Pro-Gate 50 CG utilizes a high-temperature 347 stainless steel body and a Nitronic 60 valve guide for superior thermal and fatigue resistance. The rotatable actuator housing allows for precise clocking of air lines and optional liquid cooling ports in tight engine bays, ensuring reliable performance under extreme thermal loads.
- Series: Gen-V Pro-Gate 50 CG (Compressed Gas)
- Inlet/Outlet: 50mm V-Band fitment with strap-type clamps
- Spring Rating: 5psi base spring installed (17-7 PH Stainless Steel)
- Materials: 347 SS body and Nitronic 60 valve guide
- Actuator: Rotatable housing with optional liquid cooling provision
- Design: Inverted diaphragm optimized for CO2/compressed gas control
- Part Number: TS-0554-1202
The Turbosmart Gen V Pro-Gate 50 (TS-0554-1015) is a high-performance 50mm external wastegate designed for high-flow turbocharger systems. As part of the modular Gen V range, this wastegate offers superior flow characteristics and thermal management, making it a reliable choice for high-horsepower street and race applications where precise boost control is critical.
The Sleeper series features a discrete black-anodized finish for a subtle, professional appearance in the engine bay. This Pro-Gate 50 comes pre-configured with 14psi spring pressure. Its modular design allows for 360-degree rotation of the actuator housing, ensuring easy vacuum line routing even in cramped engine compartments.
- Series: Gen V Pro-Gate 50
- Valve Diameter: 50mm
- Spring Pressure: 14psi
- Finish: Sleeper (Black Anodized)
- Manufacturer Part Number: TS-0554-1015
- Fitting: V-band inlet and outlet for secure, leak-free mounting
- Design: Modular actuator for multi-directional port positioning
The Turbosmart GenV WG50 Pro-Gate 50 is a motorsport-proven 50mm external wastegate designed for high-performance applications requiring precise boost control and exceptional thermal management. This CFD-driven design provides class-leading flow performance and durability, featuring a modular actuator housing that can be rotated to accommodate tight engine bay packaging. Built with a high-temp 347 stainless steel body and Nitronic 60 valve guides, it ensures longevity under extreme exhaust temperatures.
- Bore Diameter: 50mm
- Spring Pressure: 14psi (utilizing 17-7 PH stainless steel springs)
- Body Material: High-temperature 347 stainless steel
- Valve Guide: Nitronic 60 construction for superior fatigue resistance
- Mounting: 50mm V-band fitment with included strap-type clamps
- Cooling: Integrated optional liquid actuator cooling ports
- Adjustment: 360-degree clockable/rotatable actuator housing
- MPN: TS-0554-1014
The Turbosmart GenV WG50 Pro-Gate 50 is a motorsport-grade 50mm external wastegate designed for high-flow capacity and extreme thermal stability. Engineered using CFD analysis and bench-validated for flow performance, the Pro-Gate 50 (TS-0554-1013) provides precise boost control for high-horsepower applications. Its modular design features a clockable actuator housing, allowing for easy orientation of vacuum ports in cramped engine bays.
- Constructed with a high-temperature 347 stainless steel body and a Nitronic 60 valve guide for superior fatigue resistance.
- Includes 17-7 PH stainless steel springs for consistent pressure at high operating temperatures.
- Equipped with integrated liquid cooling ports for optional use in extreme heat environments.
- Strap-type V-band clamps ensure a secure, leak-free seal on 50mm fitment flanges.
- Compatible with optional Turbosmart position sensors for precise data logging of valve movement.
Specifications:
- Wastegate Size: 50mm
- Spring Pressure: 14psi
- Material: 347 Stainless Steel Body / Nitronic 60 Guide
- Finish: Purple Anodized
- Inlet/Outlet: V-Band
- Manufacturer Part Number: TS-0554-1013
The Turbosmart Gen V WG50 Pro-Gate 50 is a motorsport-proven 50mm external wastegate engineered for high-performance boost control. This Gen V iteration features a modular design with a rotatable actuator housing, allowing for precise routing of pressure lines in tight engine bays. Built with a high-temperature 347 stainless steel body and a Nitronic 60 valve guide, the Pro-Gate 50 is designed to withstand extreme thermal loads and resist fatigue in demanding racing environments.
- Bore Diameter: 50mm
- Spring Pressure: 14psi (pre-installed)
- Body Material: 347 Stainless Steel
- Valve Guide: Nitronic 60
- Spring Material: 17-7 PH Stainless Steel
- Inlet/Outlet: 50mm V-Band (Strap Type clamps included)
- Cooling: Optional liquid actuator cooling ports
- Adjustability: 360-degree clockable actuator housing
- MPN: TS-0554-1012
Each unit is bench-validated and utilizes CFD-driven flow performance to ensure stable boost management. The actuator design also supports an optional position sensor (sold separately) for data logging and precise wastegate monitoring.
The Turbosmart Gen V Pro-Gate 50 (WG50) is a motorsport-proven 50mm external wastegate engineered for maximum flow capacity and precise boost control. Developed using CFD (Computational Fluid Dynamics) and bench-validated, this Gen V series wastegate provides superior thermal performance and fatigue resistance compared to previous generations. Its modular design features a clockable actuator housing, allowing for 360-degree rotation to accommodate complex plumbing and tight engine bay clearances.
- High-temperature 347 stainless steel body for extreme heat resistance
- Nitronic 60 valve guide and 17-7 PH stainless steel springs
- 50mm V-band fitment with strap-type clamps for secure mounting
- Modular actuator design for easy orientation and configuration
- Optional liquid cooling ports for stability in extreme thermal environments
- Accepts optional position sensor for data logging and closed-loop control
- Manufacturer Part Number: TS-0554-1011
The Turbosmart GenV Pro-Gate 50 (WG50) is a high-performance 50mm external wastegate engineered for motorsport use and high-thermal stress environments. Designed with CFD-driven flow analysis and bench-validated performance, this wastegate provides precise boost control and exceptional fatigue resistance. The GenV features a 360-degree rotatable actuator housing, allowing for easy clocking of pressure ports in tight engine bays.
Constructed from high-temperature 347 stainless steel with a Nitronic 60 valve guide, the WG50 is built to handle extreme exhaust gas temperatures. This model comes pre-configured with a 7psi spring and utilizes strap-type V-band clamps for a secure, leak-free installation.
- 50mm V-band inlet and outlet fitment
- Pre-installed 7psi spring pressure
- High-temperature 347 stainless steel body
- Nitronic 60 stainless steel valve guide for wear resistance
- 17-7 PH stainless steel springs
- Clockable actuator housing for flexible port routing
- Integrated liquid cooling ports for extreme heat management
- Provision for optional position sensor (sold separately)
- Manufacturer Part Number: TS-0554-1002
Ensure a secure, leak-free seal for your wastegate assembly with the Turbosmart GenV WG45 Inlet V-Band Clamp. This genuine Turbosmart component (MPN: TS-0553-3003) is the exact hardware used in the hand assembly of their GenV wastegates, making it the preferred choice for servicing, rebuilding, or replacing lost hardware during a manifold swap or turbocharger upgrade.
Designed specifically for the inlet side of the Hyper-Gate45, this clamp provides the consistent tension and clamping force necessary to withstand extreme exhaust temperatures and high-pressure environments. Because it is a factory-spec spare, it guarantees perfect fitment with Turbosmart GenV flanges without the clearance or sealing issues often found in universal alternatives.
- Fits Turbosmart GenV WG45 (Hyper-Gate45) external wastegates
- Specifically designed for the wastegate inlet flange connection
- Ensures a high-integrity, leak-free exhaust seal
- Genuine Turbosmart factory replacement hardware
- Manufacturer Part Number: TS-0553-3003
The Turbosmart GenV Hyper-Gate45 Valve Seat is a precision-machined replacement component engineered specifically for the GenV 45mm external wastegate series. This seat provides the critical sealing surface required to prevent exhaust gas bypass leaks, ensuring your turbocharger system maintains consistent boost pressure and rapid spool-up response.
Constructed from high-temperature resistant materials to withstand the extreme thermal stress of high-performance exhaust streams, this valve seat is machined to exacting tolerances. It is a direct replacement for worn or damaged seats, restoring the high-integrity, gas-tight seal necessary for accurate boost control and wastegate reliability.
- Fits Turbosmart GenV Hyper-Gate45 (45mm) External Wastegates
- Precision-machined for a repeatable, high-integrity gas-tight seal
- Engineered to resist erosion and warping under extreme heat
- Essential for maintaining accurate boost targets and response
- Manufacturer Part Number: TS-0553-3001
Can’t Find the Part You Need?
Our catalog represents only a portion of the automotive products available through our supplier network. If you cannot find a specific part, brand, or application on our website, submit a request below, and our team will help source it for you.
Please include as much information as possible, such as your vehicle's year, make, model, trim, engine, desired brand, or part number, to help us quickly identify the correct product.
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.